Some links on this page are affiliate links: if you buy through them we may earn a commission, at no extra cost to you.
A Wii U NAND chip (the console’s internal eMMC storage) may be failing when the system repeatedly reports memory-corruption errors, cannot complete updates, or becomes unbootable, but no single error screen proves that diagnosis. Error 160-0103 or 160-2155 has been associated with internal eMMC/NAND failure in technical reporting, while the recovery-kit documentation warns that the same symptoms can have other hardware or software causes.
The safest approach is to document the exact behavior, follow Nintendo’s USB-storage, system-memory, and power checks, and only then seek specialist diagnosis. Do not write to the NAND or open the console merely because a code appears: board-level recovery can permanently destroy data or the console.
As an Amazon Associate I earn from qualifying purchases.
What is a Wii U NAND failure?
The Wii U stores its operating system, configuration data, and other internal data on eMMC flash memory. “NAND failure” is common shorthand for a problem involving that internal flash storage or its connection to the motherboard. In practice, a failing device can produce corrupted reads or writes, filesystem errors, failed updates, memory-corruption messages, or a system that no longer reaches the menu.
That description is a fault category, not a consumer-level test result. The Wii U does not present a published NAND-health percentage, SMART-style dashboard, or validated predictive threshold. Nintendo’s public troubleshooting identifies symptoms and separates some fault paths, but it does not state that a particular code uniquely identifies an eMMC chip.
Popular on Amazon
- 【90 Degree Full Function USB C Adapter】Supports the latest USB4 standard for up to 40Gbps of bandwidth, 8K video support, and up to 240W Fast charging; Support USB PD 3.1 Extended Power Range (EPR) including 140W, 180W and 240W. Your productivity is easily doubled. *Warm Tip: For the best fit, please make sure the USB-C port is fully exposed; thick or bulky cases may affect compatibility.
- 【Reliable Quality】Made from high-quality, scratch-resistant aluminum alloy, delicate metal frame. get excellent wear resistance and heat dissipation. Non-Slip Design for easier insertion and removal.
- 【Small and portable】Ultra thin size, ultra compact design, a petite physique that matches the minimalist design of your modern laptops. Coming with a slim figure that won't block the port next to the one it's plugged into.
- 【Compatibility】Widely work with most usb c, thunderbolt 4/3 devices. Compatibilit for ROG Ally, Steam Deck, Switch, MacBook Pro, Quest 3 VR headset, Surface Book 2, iPhone 18/17/16/15, Samsung Galaxy S23/S22/S21, Note 20/10, Google Pixel, ChromeBook, etc.
- 【Excellence Customer Support】If you experience any issues or cable failure, simply reach out to our dedicated customer service team. We provide a prompt response within 18 hours, providing you with the necessary technical support to resolve any concerns.
Technical reporting has connected Wii U errors 160-0103 and 160-2155 with community investigations into internal eMMC NAND failures. The association is useful for deciding when to investigate, not for declaring a failed chip. The recovery-kit documentation makes the same caution explicit: “THE PRESENCE OF A PARTICULAR ERROR CODE OR FAILURE SYMPTOM DOES NOT GUARANTEE THAT INSTALLATION OR USE OF THIS PRODUCT WILL CORRECT THE PROBLEM.”
Think of the code as evidence that needs corroboration. A USB device, update process, power problem, corrupted software, motherboard fault, or the internal storage itself can lead to overlapping symptoms.
Free tools Windows power users keep installed
One-click scans. No signup required.
What signs make internal NAND or eMMC trouble more likely?
A pattern is more informative than one message. Suspicion rises when several of these observations occur together:
- The console repeatedly displays a memory-corruption code such as 160-0103 or 160-2155, including after removing external USB storage.
- An update fails while using internal system memory, not only when a USB drive is connected.
- The Wii U cannot reliably reach the system menu, or it changes from occasional booting to consistently failing during startup.
- Different games or system functions fail in ways that point to shared system data rather than one disc or one title.
- The problem persists after the official power and accessory checks and does not track one removable device.
None of these observations is conclusive alone. In particular, an update error that appears only with external USB storage is evidence to investigate that storage path first. Conversely, persistence with internal memory tells Nintendo that there is an issue with the console, but Nintendo’s wording does not identify NAND as the failed component.
What do Wii U error codes 160-0103 and 160-2155 mean?
Reports collected by TechPowerUp describe community findings associating 160-0103 and 160-2155 with possible internal eMMC NAND failure in long-term Wii U owners. That is a reported association rather than a Nintendo-confirmed diagnostic rule.
If one of these codes appears, record the complete screen and the circumstances: whether it appears during boot, an update, a game launch, or another operation; whether a USB drive is attached; and whether the console ever reaches the menu afterward. The context helps a repair specialist distinguish a repeatable storage symptom from a one-time software or peripheral event.
Quick wins for a faster PC:
Scan for outdated or missing drivers - takes under a minuteDriver Scan →Repair Windows errors before they cause bigger problemsFix Now →Fix the driver behind crashes, sound loss and screen glitchesFind Drivers →Also popular on Amazon
- 5-in-1 Connectivity: Equipped with a 4K HDMI port, a 5 Gbps USB-C data port, two 5 Gbps USB-A ports, and a USB C 100W PD-IN port. Note: The USB C 100W PD-IN port supports only charging and does not support data transfer devices such as headphones or speakers.
- Powerful Pass-Through Charging: Supports up to 85W pass-through charging so you can power up your laptop while you use the hub. Note: Pass-through charging requires a charger (not included). Note: To achieve full power for iPad, we recommend using a 45W wall charger.
- Transfer Files in Seconds: Move files to and from your laptop at speeds of up to 5 Gbps via the USB-C and USB-A data ports. Note: The USB C 5Gbps Data port does not support video output.
- HD Display: Connect to the HDMI port to stream or mirror content to an external monitor in resolutions of up to 4K@30Hz. Note: The USB-C ports do not support video output.
- What You Get: Anker 332 USB-C Hub (5-in-1), welcome guide, our worry-free 18-month warranty, and friendly customer service.
Do not infer that the code tells you which physical component is bad. The recovery-kit documentation lists other possible hardware and software causes and says installation is not guaranteed to correct a symptom. A code can justify preserving data and obtaining an evaluation; it cannot by itself justify a NAND write.
How do I separate a NAND problem from USB-storage trouble?
Nintendo’s guidance for error 105-3013 provides the clearest official comparison. If the error occurs with external USB storage, retry the relevant update using the Wii U’s internal system memory. If the error continues while using system memory, Nintendo says there is an issue with the console. That conclusion still does not name NAND as the defective part.
- Write down the code and trigger. Note the exact digits, the operation in progress, and whether the failure is repeatable.
- Shut down normally if possible and disconnect external USB storage. Remove the USB drive and any other nonessential accessory before repeating the official update or startup procedure.
- Use internal system memory for the update test. Follow Nintendo’s instructions for error 105-3013. A failure limited to the USB path points the investigation toward the drive, cable, enclosure, power, or USB connection rather than immediately toward NAND.
- Compare the result. If the operation succeeds on internal memory, do not call the NAND failed. If it fails again on internal memory, document that result as a console-level issue and arrange qualified diagnosis.
- Preserve the evidence. Keep the code, dates, attached devices, and whether the menu was reachable. Avoid repeated experiments that write or format storage when data preservation matters.
This process is a fault-isolation step, not a chip test. A USB result can narrow the possibilities, while an internal-memory failure establishes that the console needs attention without proving which board component is responsible.
Could the power supply be the real problem?
Yes. A Wii U that shows no power light needs power troubleshooting before storage is blamed. Nintendo’s no-power-light guidance tells owners to remove connected accessories and check the AC adapter and wall outlet.
- Disconnect accessories and external devices, leaving the console and its required power connections.
- Check that the AC adapter is connected correctly at the console and outlet, and try the official outlet checks Nintendo specifies.
- Observe whether the power light returns or whether the symptom remains completely dark.
- Record the result before pursuing storage repair.
A no-light condition is not the same evidence as a boot-time memory error. Power delivery, the adapter, the outlet, or another board fault can prevent startup without any NAND failure. If the console has a documented memory error and also loses power, treat those as separate fault paths until a technician examines the hardware.
Can a NAND problem stop the Wii U from booting?
It can be consistent with an unbootable or “bricked” system, because the console needs readable internal storage for startup. Technical reporting about the Wii U errors above describes owners whose systems became unusable, and internal eMMC failure is one proposed explanation. However, an inability to boot is not a NAND-specific test: power, motherboard, software, or other storage faults can produce a similar result.
Also popular on Amazon
- Sleek 7-in-1 USB-C Hub: Features an HDMI port, two USB-A 3.0 ports, and a USB-C data port, each providing 5Gbps transfer speeds. It also includes a USB-C PD input port for charging up to 100W and dual SD and TF card slots, all in a compact design.
- Flawless 4K@60Hz Video with HDMI: Delivers exceptional clarity and smoothness with its 4K@60Hz HDMI port, making it ideal for high-definition presentations and entertainment. (Note: Only the HDMI port supports video projection; the USB-C port is for data transfer only.)
- Double Up on Efficiency: The two USB-A 3.0 ports and a USB-C port support a fast 5Gbps data rate, significantly boosting your transfer speeds and improving productivity.
- Fast and Reliable 85W Charging: Offers high-capacity, speedy charging for laptops up to 85W, so you spend less time tethered to an outlet and more time being productive.
- What You Get: Anker USB-C Hub (7-in-1), welcome guide, 18-month warranty, and our friendly customer service.
Separate the stages of failure when you describe the problem. “No power light” means the console does not show the expected power indication. “Power light but no menu” describes a different state. “Error screen during an update” is different again. A specialist can make better decisions when these states are not collapsed into the single word “bricked.”
If the console still reaches the menu intermittently, prioritize preserving accessible data and documenting the successful boot conditions. Intermittent access can disappear, and a later write operation can make recovery more difficult; do not assume that a temporary successful boot means the storage is healthy.
What’s actually slowing this PC down?
Pick the symptom - the matching free tool is one click away.
How is a suspected Wii U NAND failure confirmed?
Confirmation generally requires board-level examination and a controlled read of the internal storage, not just another attempt at an update. The cited Wii-U NAND Recovery Kit includes a NAND-AID interface and an SD-Tool described for dumping and writing NAND/eMMC data. Its documentation says the procedure can involve console disassembly, soldering, motherboard-level rework, data manipulation, and verification.
The exact method depends on the console revision, motherboard and storage arrangement, the condition of the eMMC, and the technician’s equipment. Compatibility therefore has to be checked for the particular Wii U before buying or installing anything. A kit is a specialist interface for recovery work, not a plug-in diagnostic accessory that automatically identifies a failed chip.
A qualified technician may first determine whether the storage can still be read, make a raw backup, verify that backup independently where technically possible, and inspect the board and connections. Only after those checks can the technician decide whether a replacement, repair, data reconstruction, or a different board-level intervention is appropriate. The available evidence does not establish one universal procedure or a guaranteed repair outcome for every Wii U revision.
What are the risks of DIY NAND recovery?
The recovery-kit vendor warns that an incorrect or interrupted procedure can cause permanent data loss, filesystem corruption, or complete console failure. Soldering mistakes, an incompatible installation, a bad dump, power interruption during a write, or an unverified backup can turn a potentially recoverable system into a harder case.
Crashes, No Sound, or Screen Glitches?
Random freezes, missing sound and display glitches usually trace back to one bad driver. Find and replace yours safely.Free scan · under a minuteWindows Errors? Fix Them Before They Spread
Repair common Windows errors and clear accumulated junk for a smoother, more stable PC - no reinstall needed.Free scan · no reinstallAlso popular on Amazon
- Portable and powerful USB-C HUB: BENFEI USB Type-C HUB, with super-soft and knot-free silicone woven design cable, meets most mobile office needs. Compact, lightweight, stylish, and powerful portable USB C Hub equipped with 1 x HDMI port, 1 x 100W charging, and 3 x USB ports. 18-month warranty, 24-hour response, to ensure you feel at ease when using our product.
- Design centered on comfort and reliability: Thanks to BENFEI's end-to-end in-house cable production capability, in-house PCBA and assembly capability, using the industry's most advanced silicone woven design and process, 20cm cable in length, no knots, super-soft, the HUB is easy to use in all scenarios: laptop, tablet, stand etc. Super-soft, 25000+ life cycles, to meet your daily carrying and office needs.
- 100W Charging: Support up to 90W USB C pass-through charging via Type-C port to keep your laptop powered. 10W is reserved for other interface operations. No data and video function on the Type-C port.
- 4K HDMI Display: The HDMI port supports media display at resolutions up to 4K 30Hz, keeping every incredible moment detailed and ultra vivid. Please note that the C port of the Host device needs to support video output.
- Transfer Files in Seconds: Transfer files and from your laptop at speeds up to 10 Gbps with USB A 3.2 port. Extra 2 USB A 2.0 ports are perfectly for your keyboards and mouse.
Before any board work:
- Confirm the exact console and motherboard revision and the tool’s stated compatibility.
- Understand whether the planned operation reads data, writes data, or both.
- Use appropriate equipment and a stable procedure; do not improvise connections from a diagram meant for another revision.
- Make a complete backup before modifying storage whenever the console still allows one.
- Independently verify the backup where the procedure and tools make that possible.
- Keep the original dump untouched and work from a copy, so a failed experiment does not destroy the only source.
- Stop if the required soldering, rework, or data handling is outside your experience.
These precautions reduce risk; they do not guarantee recovery. The vendor’s disclaimer applies even when the screen shows a code commonly associated with eMMC failure.
Which repair path fits your situation?
Choose based on evidence, data value, skills, and hardware availability rather than on the error code alone.
| Path | Appropriate when | What it requires | Main risk or limitation |
|---|---|---|---|
| Official troubleshooting first | The fault may involve USB storage, an update, accessories, or power. | Following Nintendo’s documented checks and recording results. | It narrows the fault but does not diagnose a NAND chip. |
| Specialist diagnosis | The console shows repeatable memory errors, fails with internal memory, or will not boot and the data matters. | A technician with Wii U board-level experience, compatible tools, and a plan for verified backups. | Diagnosis and repair availability vary; no universal outcome is established. |
| DIY recovery work | You have confirmed compatibility, soldering and rework skills, suitable equipment, and a backup strategy. | Disassembly, NAND-AID/SD-Tool-type equipment, data handling, and verification. | Incorrect or interrupted work can permanently lose data or damage the console. |
| Replacement console | Repair is unavailable, uneconomical, or the data is not recoverable. | A compatible replacement and a plan for any locally stored data that cannot be transferred. | Replacing hardware does not recover data from a failed or unreadable internal chip. |
Details checked November 2026.
Exact repair prices, success rates, and replacement values are not established by the cited material, so they should be obtained directly from a qualified provider and treated as case-specific. A provider should explain whether the initial work is a non-destructive read, whether a verified image will be retained, and what happens if the storage cannot be read.
What should I tell a repair specialist?
Give the technician a concise timeline rather than only saying “the NAND is bad.” Include:
- The exact error code and the full wording shown on screen.
- When the problem began and whether it followed an update, game launch, power interruption, or accessory change.
- Whether a USB storage device was connected and what happened after it was removed.
- Whether the console has a power light, reaches the health-and-safety screen, reaches the menu, or fails earlier.
- Whether the problem is constant or intermittent and what conditions allow a successful boot.
- Whether you have already formatted, initialized, opened, soldered, or attempted to write the internal storage.
- Which saves or other data are important and whether any backup exists.
This information helps the specialist avoid destructive assumptions. It also makes it easier to choose between a diagnostic read, data-preservation work, board repair, or replacement.
Independent reader supportYour contribution helps us test, update, and keep practical guides available for everyone.What does Nintendo’s current service status mean?
Nintendo’s current Wii U troubleshooting page states: “Nintendo no longer offers service requests for the Wii U console, the Wii U GamePad, or Wii U accessories.” The page directs owners to troubleshooting and replacement options. That means an owner should not assume an official mail-in repair is available; confirm the current support page for your region before shipping hardware or looking for an authorization.
Also popular on Amazon
- 【Read before You Buy】 Note: This adapter is USB 2.0 version and cannot transmit HDM, VGA, or other video signals. Nevertheless, they are fully capable of charging devices,duplicating files, and can be seamlessly integrated with USB-C earphones, wireless network adapters, and SD card adapters.
- 【Easy to Use and Safe】Thanks to modern manufacturing techniques, we've made these adapters sufficiently compact so that they can remain inserted in your device without noticeable protrusion or inconvenience. This means you don't have to constantly plug and unplug them, reducing the likelihood of wear and misalignment, and making them more convenient to carry around.
- 【Reliable Quality】Engineered for enhanced durability, durable aluminum alloy shell material,get excellent wear resistance and heat dissipation,the male USB C and female USB connectors & the male USB and female USB C connectors are designed to be plugged and unplugged up to 20000 times. Provides data transfer, device charging, memory space expansion, and additional computer peripherals.
- 【Think more for you】Do you need to connect a USB-C-enabled device to an odd device that only has USB-A ports? Then these USB-A male to USB-C female adapters are made for you.Simply insert the adapter into the USB-A port on the device, and you can instantly connect your USB-C device to the device that originally didn't have the correct connection port.
- 【Trusted xiwxi Quality and Service】As a responsible brand seller, you will receive xiwxi's 12-month Quality assurance and lifetime friendly customer service, you're not just buying a product,you're investing in peace of mind with all-round quality and exceptional customer service.
With official service unavailable, a specialist independent repair may be the practical route for a valuable console or irreplaceable data. Ask what diagnostic work is included, how backups are handled, which revisions are supported, and whether the technician will return the original storage or board if recovery is unsuccessful.
What should you not conclude from a single symptom?
- “160-0103 means the NAND is definitely dead.” The code is associated with possible internal eMMC failure in technical reporting, but it is not a manufacturer-confirmed standalone test.
- “105-3013 proves the eMMC failed.” Nintendo’s instructions use the difference between external USB storage and internal system memory to identify a console issue, not a particular component.
- “No power light is a storage error.” Nintendo’s separate guidance starts with accessories, the AC adapter, and the outlet.
- “A recovery kit will diagnose or fix it automatically.” The vendor describes specialist dumping and writing work and expressly disclaims guaranteed correction.
- “A replacement board or console will restore saves.” Hardware replacement does not automatically recover data that was stored on an unreadable internal chip.
The practical verdict is therefore conditional: a repeated memory-corruption error, especially alongside internal-memory update failure or loss of boot access, warrants NAND/eMMC investigation. Diagnosis requires more than the code, and recovery should be treated as data-preservation and board-level work rather than a routine software repair.
Do these 3 things before closing this tab:
1Scan for outdated or missing drivers - takes under a minute2Clear out junk files and repair common Windows errors3Fix the driver behind crashes, sound loss and screen glitchesFrequently Asked Questions
Is there a Wii U NAND health meter or SMART test?
No published Nintendo health meter, SMART-style result, or validated predictive threshold is provided in the cited material. There is also no authoritative failure-rate statistic that can turn a console’s age or one error code into a probability of failure.
Can I buy a recovery kit just to find out whether the chip is bad?
That is the wrong order of operations. The documented kit is intended for NAND/eMMC dumping and writing and may require disassembly, soldering, and data verification; its vendor says a symptom or code does not guarantee that its use will correct the problem. Confirm the console revision and obtain a specialist diagnosis before treating the tool as a repair plan.
Will replacing the USB drive prove the Wii U NAND is healthy?
No. If an update works with internal memory after the USB path is removed, the external-storage path becomes the leading suspect, but that result is not a health certificate for the eMMC. It only shows that the immediate failure was not reproduced under that test condition.
What happens to my saves if the internal storage cannot be read?
A replacement console or board does not automatically bring back data stored on an unreadable chip. If the Wii U still boots, ask a qualified specialist about a non-destructive backup and independent verification before any write or replacement procedure.

