Thanksgiving DealsAmazon USThanksgiving week: Black Friday picks start earlyAmazon US: current deals, useful picks and tech finds.Check DealsClean PCRecommendedOne scan can reveal what keeps slowing WindowsLook for cleanup and repair opportunities.Run ScanThanksgiving DealsAmazon USDo not wait for the rush - compare today's dealsAmazon US: current deals, useful picks and tech finds.See Picks×
FREEDOM251

Freedom251 › Blog

Which Materials Work Best as Ballast Inside a 3D Print?

By Freedom251 Team · · 11 min read

Special offer. See more information about Outbyte and uninstall instructions. Please review EULA and Privacy policy.

Some links on this page are affiliate links: if you buy through them we may earn a commission, at no extra cost to you.

For a purpose-designed cavity in an FDM print, the best-documented ballast materials are a fitted steel plate or steel shot held in epoxy resin. A steel plate is practical when the cavity has a defined shape; steel shot mixed with epoxy can follow a winding passage. The important qualification is that ballast must go into an intentional, accessible void—ordinary slicer infill is not automatically a reservoir you can fill.

Stratasys documents both approaches for FDM surrogate parts, while engineering research has studied resin-filled voids for structural changes rather than proving one universal “best” filler. Your choice should follow the cavity geometry, installation method, resistance to movement or rattling, and how you will close the opening.

As an Amazon Associate I earn from qualifying purchases.

Special offer. See more information about Outbyte and uninstall instructions. Please review EULA and Privacy policy.

Which materials are documented for adding weight inside a 3D print?

The strongest direct guidance identifies three related materials:

  • Steel plate: a plate cut to fit a receiving cavity can reproduce a target part’s weight and balance.
  • Steel shot: small steel pellets can occupy an irregular or winding cavity.
  • Epoxy resin: used to bond steel ballast in place, and in separate research as a fill for deliberately designed voids.

Stratasys’s Surrogate Parts technical application guide specifically says that “for cavities that snake through the part, a mixture of steel shot and epoxy resin is effective.” The same guide describes steel plate cut to fit receiving cavities and recommends bonding the ballast, then attaching a bonded FDM cover panel.

Popular on Amazon
Sale
Silkland 40Gbps USB C 90 Degree Right Angle Adapter 2 Pack, 240W USB4 | Male to Female Extender, 8K@60Hz, Thunderbolt 4/3, Steam Deck, ROG Ally, MacBook, Switch 2, iPhone 18/17/16/15, Quest 3 VR
  • 【90 Degree Full Function USB C Adapter】Supports the latest USB4 standard for up to 40Gbps of bandwidth, 8K video support, and up to 240W Fast charging; Support USB PD 3.1 Extended Power Range (EPR) including 140W, 180W and 240W. Your productivity is easily doubled. *Warm Tip: For the best fit, please make sure the USB-C port is fully exposed; thick or bulky cases may affect compatibility.
  • 【Reliable Quality】Made from high-quality, scratch-resistant aluminum alloy, delicate metal frame. get excellent wear resistance and heat dissipation. Non-Slip Design for easier insertion and removal.
  • 【Small and portable】Ultra thin size, ultra compact design, a petite physique that matches the minimalist design of your modern laptops. Coming with a slim figure that won't block the port next to the one it's plugged into.
  • 【Compatibility】Widely work with most usb c, thunderbolt 4/3 devices. Compatibilit for ROG Ally, Steam Deck, Switch, MacBook Pro, Quest 3 VR headset, Surface Book 2, iPhone 18/17/16/15, Samsung Galaxy S23/S22/S21, Note 20/10, Google Pixel, ChromeBook, etc.
  • 【Excellence Customer Support】If you experience any issues or cable failure, simply reach out to our dedicated customer service team. We provide a prompt response within 18 hours, providing you with the necessary technical support to resolve any concerns.

Those are documented methods, not a universal specification for every printer, filament, temperature, or load. Community discussions also mention ball bearings, washers, sand, scrap metal and powders, but those suggestions are anecdotal and should be treated as ideas for investigation rather than equivalent recommendations.

How do steel plate and steel shot differ?

Steel plate and steel shot solve different cavity problems. Choose the one that matches the shape you can model and the way you can insert and retain the ballast.

Special offer. See more information about Outbyte and uninstall instructions. Please review EULA and Privacy policy.
Material Best fit What the sources support Practical limits
Fitted steel plate A defined, mostly open cavity Stratasys describes cut-to-fit plate as a common way to match weight and balance in a surrogate component. Needs accurate cavity dimensions, insertion access, retention and a closure.
Steel shot Irregular or winding cavity paths Stratasys identifies a steel-shot-and-epoxy mixture as effective for cavities that snake through a part. The small pieces must be contained; the guide does not specify shot size or a universal quantity.
Epoxy resin Bonding shot or filling a separately designed void The guide uses epoxy to secure ballast; a PLOS ONE study investigates resin-filled FDM voids and channels. Research on strength and stiffness is not a head-to-head ballast test. Check product and filament compatibility.
Other loose fillers Noncritical experiments only Community posts discuss options such as ball bearings, sand and scrap metal. Anecdotal suggestions do not establish predictable mass, adhesion, safety or long-term durability.

There is no source-backed density chart, weight-gain formula or amount that works across materials. If a particular final mass matters, design the cavity around the ballast you have selected and verify the completed part with an appropriate scale rather than relying on an assumed fill volume.

Is ordinary slicer infill a ballast cavity?

No. A slicer normally creates an outer shell and an interior infill pattern as it generates toolpaths. That internal structure is not necessarily a continuous, reachable void. The UC Davis FDM overview distinguishes the shell from slicer-generated infill; a fillable reservoir is a separate modeling decision.

To add ballast, model a hollow region with an opening, a removable panel, or another planned access route. You can also design a pause into a print so the opening is reachable during the build, but pausing and pouring material into a print is a community workflow, not the concrete manufacturer method described by Stratasys. Whichever route you use, leave enough clearance for the plate or for shot to reach the entire cavity and provide a reliable closure afterward.

Also popular on Amazon
Sale
Anker USB C Hub, 5-in-1 USBC to HDMI Splitter with 4K Display | 85W Max PD, 1 Powered USB-C 5Gbps & 2 Powered USB-A 3.0 5Gbps Data Ports, for MacBook Pro, MacBook Air, Dell and More (Black)
  • 5-in-1 Connectivity: Equipped with a 4K HDMI port, a 5 Gbps USB-C data port, two 5 Gbps USB-A ports, and a USB C 100W PD-IN port. Note: The USB C 100W PD-IN port supports only charging and does not support data transfer devices such as headphones or speakers.
  • Powerful Pass-Through Charging: Supports up to 85W pass-through charging so you can power up your laptop while you use the hub. Note: Pass-through charging requires a charger (not included). Note: To achieve full power for iPad, we recommend using a 45W wall charger.
  • Transfer Files in Seconds: Move files to and from your laptop at speeds of up to 5 Gbps via the USB-C and USB-A data ports. Note: The USB C 5Gbps Data port does not support video output.
  • HD Display: Connect to the HDMI port to stream or mirror content to an external monitor in resolutions of up to 4K@30Hz. Note: The USB-C ports do not support video output.
  • What You Get: Anker 332 USB-C Hub (5-in-1), welcome guide, our worry-free 18-month warranty, and friendly customer service.

How should you design a cavity for ballast?

Design the void before slicing, and treat the ballast, adhesive and cover as one assembly. A useful design review asks four questions: Can the filler physically enter? Can it be restrained? Can the opening be closed without interfering with the part? Will the finished mass sit where the design requires it?

Special offer. See more information about Outbyte and uninstall instructions. Please review EULA and Privacy policy.
  1. Define the mass and balance goal. Decide whether you need a heavier base, a target center of gravity, or simply more inertia. A plate can be located precisely; loose shot can conform to a path but may distribute differently unless bonded.
  2. Model the receiving cavity. For a plate, provide a shaped pocket and insertion clearance. For shot, provide a channel, pocket or series of connected spaces that can be filled from an accessible opening.
  3. Plan the access feature. Include an opening sized for the plate, a funnel or loading port for shot, or a pause location that leaves the cavity exposed. Do not assume a hole hidden inside the slicer’s infill will remain open.
  4. Reserve room for adhesive and closure. Epoxy can occupy space around the ballast. A cover panel needs a ledge or overlap so it can be bonded securely without protruding into moving parts or mating surfaces.
  5. Check print orientation and walls. The cavity must survive printing without unsupported roof sections, accidental bridges or thin walls that can crack during filling. The cited sources do not prescribe a universal wall thickness, so use the limits of your chosen filament and printer process.
  6. Inspect before filling. Remove loose strings and confirm that the access route is not blocked. A trial fit with an empty plate or a small amount of shot can reveal problems before adhesive is introduced.

The Stratasys example uses an intentional receiving cavity, epoxy bonding and a bonded FDM cover panel. That sequence is more controllable than trying to convert arbitrary infill into a reservoir.

What is a practical steel-plate installation workflow?

A fitted plate is the most straightforward choice when you can shape a cavity around a known piece of steel.

  1. Measure the plate and model clearance. Account for insertion direction and enough room to avoid forcing the print walls apart.
  2. Print the part with the cavity and cover feature. Keep the access opening reachable after printing; a separate cover can be printed as the closure.
  3. Dry-fit the plate. Confirm that it reaches its intended location and does not interfere with screws, moving joints, wiring or other internal features.
  4. Apply adhesive according to the epoxy manufacturer’s instructions. The documented approach bonds the ballast into the cavity. Avoid assuming that every epoxy adheres equally well to every filament.
  5. Seat and retain the plate. Hold it in the intended position while the adhesive cures. The retention method should prevent sliding when the part is tilted or vibrated.
  6. Bond the cover panel. Close the access opening with the planned FDM panel or another designed closure, then allow the adhesive to cure as directed before loading the part.

This method gives a defined location and avoids loose pieces rattling inside the print. Its trade-off is geometric: the cavity must accommodate a rigid plate and an insertion path.

How do you use steel shot in a winding cavity?

Steel shot is useful when a rigid plate cannot follow the cavity. The pellets can occupy bends and narrow sections, but they must be immobilized if movement, noise or shifting balance is a concern.

Special offer. See more information about Outbyte and uninstall instructions. Please review EULA and Privacy policy.
Also popular on Amazon
Sale
Anker USB C Hub, 7in1 Multi-Port USB Adapter, 4K@60Hz USBC to HDMI Splitter | 85W Max PD, 2 USB 3.0 & 1 USBC Data Ports, SD/TF Card Reader, for Laptops/Mac and Other Type C Devices (Charger Not Included)
  • Sleek 7-in-1 USB-C Hub: Features an HDMI port, two USB-A 3.0 ports, and a USB-C data port, each providing 5Gbps transfer speeds. It also includes a USB-C PD input port for charging up to 100W and dual SD and TF card slots, all in a compact design.
  • Flawless 4K@60Hz Video with HDMI: Delivers exceptional clarity and smoothness with its 4K@60Hz HDMI port, making it ideal for high-definition presentations and entertainment. (Note: Only the HDMI port supports video projection; the USB-C port is for data transfer only.)
  • Double Up on Efficiency: The two USB-A 3.0 ports and a USB-C port support a fast 5Gbps data rate, significantly boosting your transfer speeds and improving productivity.
  • Fast and Reliable 85W Charging: Offers high-capacity, speedy charging for laptops up to 85W, so you spend less time tethered to an outlet and more time being productive.
  • What You Get: Anker USB-C Hub (7-in-1), welcome guide, 18-month warranty, and our friendly customer service.
  1. Provide a loading opening. A funnel-shaped entry or removable cover makes it easier to get shot into a long passage without trapping air pockets or spilling pellets into the print’s interior.
  2. Use only the cavity you intentionally designed. Do not pour shot into ordinary infill unless you have verified that the space is continuous, reachable and structurally suitable.
  3. Position the part as planned. Orientation can affect where loose pellets settle. If the final balance is important, support the part in its intended orientation during filling.
  4. Add epoxy to bind the shot. Stratasys specifically identifies a steel-shot-and-epoxy mixture for snaking cavities. Follow the resin product’s mixing, working-time and curing directions rather than guessing.
  5. Check for movement before closure. If pellets still shift, add the planned binder or revise the cavity and closure. A cover alone does not prevent internal rattling.
  6. Install and bond the cover. Close the opening only after the ballast is where you want it and the adhesive system is compatible with the printed material.

The guide does not name a shot diameter, fill percentage or quantity. Those values depend on the cavity and the required final mass, so they should not be presented as universal settings.

Can epoxy resin itself be used as ballast?

Epoxy has two distinct roles, and confusing them can lead to overclaiming. In the documented ballast method, epoxy is primarily a binder that locks steel plate or shot into a cavity. Separately, the PLOS ONE paper “Strengthening of 3D Printed Fused Deposition Manufactured Parts Using the Fill Compositing Technique” studies hollow parts, sparse-filled parts and parts with hollow channels that are filled with resin to examine strength and stiffness.

That research shows that a designed resin-filled structure can change mechanical behavior, but it does not establish a universal best ballast, a guaranteed weight increase for consumer prints, or compatibility with every filament and resin. If you fill a void with resin, model the void for that purpose, consider how the resin reaches all regions, and follow the resin and printed-material manufacturer’s instructions. Treat any structural benefit as application-specific rather than automatic.

What about ball bearings, sand, washers or other loose materials?

These materials appear in community conversations because they are accessible and can add mass. Ball bearings or washers may fit a broad cavity; sand or metal granules can conform to complex spaces. However, the supplied evidence does not validate them as interchangeable with the steel plate and steel-shot methods in the Stratasys guide.

Special offer. See more information about Outbyte and uninstall instructions. Please review EULA and Privacy policy.

Loose fillers introduce questions that a bonded steel insert avoids: Can the pieces migrate? Will they abrade the cavity walls? Do they rattle? Can moisture or contamination enter? Is the opening sealed well enough to prevent leakage? If the part is safety-critical, load-bearing, exposed to heat, or used near people, an anecdotal filler choice is especially difficult to justify without application-specific engineering data. For a noncritical prototype, you can investigate an alternative, but document the cavity, closure and retention method and do not describe the result as a validated general recommendation.

Also popular on Amazon
Sale
BENFEI USB C Hub 5-in-1 with 4K HDMI(Certified), 100W Power Delivery, 3 USB-A, Silicone Cable, Aluminum Case Compatible with MacBook Pro/Air, iPad Pro, iMac, iPhone 15 Pro/Pro Max, XPS, Thinkpad
  • Portable and powerful USB-C HUB: BENFEI USB Type-C HUB, with super-soft and knot-free silicone woven design cable, meets most mobile office needs. Compact, lightweight, stylish, and powerful portable USB C Hub equipped with 1 x HDMI port, 1 x 100W charging, and 3 x USB ports. 18-month warranty, 24-hour response, to ensure you feel at ease when using our product.
  • Design centered on comfort and reliability: Thanks to BENFEI's end-to-end in-house cable production capability, in-house PCBA and assembly capability, using the industry's most advanced silicone woven design and process, 20cm cable in length, no knots, super-soft, the HUB is easy to use in all scenarios: laptop, tablet, stand etc. Super-soft, 25000+ life cycles, to meet your daily carrying and office needs.
  • 100W Charging: Support up to 90W USB C pass-through charging via Type-C port to keep your laptop powered. 10W is reserved for other interface operations. No data and video function on the Type-C port.
  • 4K HDMI Display: The HDMI port supports media display at resolutions up to 4K 30Hz, keeping every incredible moment detailed and ultra vivid. Please note that the C port of the Host device needs to support video output.
  • Transfer Files in Seconds: Transfer files and from your laptop at speeds up to 10 Gbps with USB A 3.2 port. Extra 2 USB A 2.0 ports are perfectly for your keyboards and mouse.

How can you keep ballast from shifting or rattling?

Retention should be designed, not left to gravity. Bonding the ballast with epoxy is the clearest source-backed approach. A fitted cavity that captures a plate mechanically can supplement the bond, while a cover panel prevents the insert from escaping through the access opening.

For shot, immobilization is more important because each pellet can move independently. A cavity that is merely capped may still allow noise and a changing center of gravity. Consider the part’s orientation, vibration and expected impacts when deciding whether the shot must be fully bonded. The cited sources do not provide a universal vibration test or cure schedule, so use the adhesive maker’s directions and the requirements of the actual application.

What should you check before closing a ballast-filled print?

  • Mass and balance: Confirm that the completed part has the intended weight distribution, not just the intended filler volume.
  • Clearance: Make sure the insert and cured adhesive do not obstruct fasteners, shafts, wiring or access to serviceable parts.
  • Containment: Tilt and gently handle a noncritical assembly to identify movement before final closure; do not substitute this for formal qualification where safety matters.
  • Closure integrity: Check that the cover sits flush and that the bonding surfaces are clean and compatible with the adhesive.
  • Material limits: Consider the print material’s temperature range and the heat generated during resin curing. The supplied sources do not offer a cross-material compatibility chart.
  • Future access: If the ballast may need removal, design a mechanical cover or service opening instead of permanently bonding every component.
Independent reader supportYour contribution helps us test, update, and keep practical guides available for everyone.Support on Ko-Fi

Which ballast should you choose?

Use a fitted steel plate when you can model a defined pocket and need a predictable location for the mass. Use steel shot bound with epoxy when the cavity winds through the part or has a shape a rigid plate cannot reach. Use epoxy resin as a structural fill only when you have intentionally designed and evaluated a resin-filled void; the published study is about mechanical behavior, not a universal ballast ranking.

Special offer. See more information about Outbyte and uninstall instructions. Please review EULA and Privacy policy.

Other loose fillers may be workable for an experiment, but the evidence supplied here does not support treating them as equal alternatives. In every case, the cavity, loading access, retention method and closure are as important as the material itself.

How we selected these options

The comparison gives priority to materials named in the Stratasys technical guide, then distinguishes the separate resin-filling research from anecdotal community suggestions. The deciding criteria are cavity geometry, installation access, resistance to shifting or rattling, and the ability to close the print reliably—not an unreported performance test.

Also popular on Amazon
𝟒𝐏𝐚𝐜𝐤 𝐔𝐩𝐠𝐫𝐚𝐝𝐞𝐝 USB to USB C Adapter,Type-C Female to A Male Charger Converter for iPhone 18 Charger,iWatch Ultra SE 9 10,iPhone 17 Pro Max 16 15 14,Samsung S25,AirPods,iPad,Car,Xbox
  • 【Read before You Buy】 Note: This adapter is USB 2.0 version and cannot transmit HDM, VGA, or other video signals. Nevertheless, they are fully capable of charging devices,duplicating files, and can be seamlessly integrated with USB-C earphones, wireless network adapters, and SD card adapters.
  • 【Easy to Use and Safe】Thanks to modern manufacturing techniques, we've made these adapters sufficiently compact so that they can remain inserted in your device without noticeable protrusion or inconvenience. This means you don't have to constantly plug and unplug them, reducing the likelihood of wear and misalignment, and making them more convenient to carry around.
  • 【Reliable Quality】Engineered for enhanced durability, durable aluminum alloy shell material,get excellent wear resistance and heat dissipation,the male USB C and female USB connectors & the male USB and female USB C connectors are designed to be plugged and unplugged up to 20000 times. Provides data transfer, device charging, memory space expansion, and additional computer peripherals.
  • 【Think more for you】Do you need to connect a USB-C-enabled device to an odd device that only has USB-A ports? Then these USB-A male to USB-C female adapters are made for you.Simply insert the adapter into the USB-A port on the device, and you can instantly connect your USB-C device to the device that originally didn't have the correct connection port.
  • 【Trusted xiwxi Quality and Service】As a responsible brand seller, you will receive xiwxi's 12-month Quality assurance and lifetime friendly customer service, you're not just buying a product,you're investing in peace of mind with all-round quality and exceptional customer service.

Sources and scope

The direct ballast guidance comes from Stratasys’s FDM surrogate-parts technical application guide. The distinction between shell, infill and a deliberately modeled void is explained by UC Davis Tech Foundry. Resin-filled voids and channels are examined in the PLOS ONE study. Community wording about paused-print filling and alternative fillers comes from an r/3Dprinting discussion; those comments are informal and are not treated as validated recommendations.

Frequently Asked Questions

Can I add ballast to a print after it has already finished?

Only if the finished part has a designed opening or you can safely create one without weakening it. Drilling into an arbitrary shell may intersect hidden infill, trapped debris or critical walls, so a purpose-modeled cavity and cover is usually more controllable.

Free tools Windows power users keep installed

One-click scans. No signup required.

Special offer. See more information about Outbyte and uninstall instructions. Please review EULA and Privacy policy.

Does steel shot need epoxy inside a 3D print?

It does not need epoxy merely to occupy a cavity, but loose shot can move, rattle and change the balance of the part. The documented winding-cavity method uses epoxy to bind the shot, so use a binder when immobilization matters and follow the product’s compatibility and curing directions.

Will filling a print with resin always make it stronger?

No. The published resin-fill research examines specifically designed structures and mechanical tests; it does not prove that pouring any resin into any consumer print will improve strength. Geometry, resin, filament, bonding and curing conditions all affect the result.

How do I make a ballast cavity removable?

Model a mechanically retained cover, threaded plug or other service opening instead of relying only on permanent adhesive. Ensure the closure itself cannot loosen under the part’s expected vibration, orientation and handling.

Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon at the time of purchase will apply. Prices as of November 23, 2026 4:14 am GMT+0530.

Leave a Reply

Your email address will not be published. Required fields are marked *

Special offer. See more information about Outbyte and uninstall instructions. Please review EULA and Privacy policy.

Recommended PC Tool
Recommended PC Tool
Outdated Drivers Are Slowing You DownFree scan - exact matches
PC Slower Than It Used to Be?Free scan - under a minute

Two free Windows tools

One Free Minute Could Fix That PC

Before you go - each of these free tools takes about a minute and tackles what quietly slows a Windows PC down.

Special offer. View Outbyte info, uninstall instructions, EULA, and Privacy Policy.