Thanksgiving DealsAmazon USThanksgiving week: Black Friday picks start earlyAmazon US: current deals, useful picks and tech finds.Check DealsWindows FixRecommendedWindows errors stealing your time? Find the fix fastScan stability, cleanup and performance issues.Fix NowThanksgiving DealsAmazon USDo not wait for the rush - compare today's dealsAmazon US: current deals, useful picks and tech finds.See Picks×
FREEDOM251

Freedom251 › Blog

Which cheap Ethernet cable tester is best for home troubleshooting?

By Freedom251 Team · · 12 min read

Special offer. See more information about Outbyte and uninstall instructions. Please review EULA and Privacy policy.

Some links on this page are affiliate links: if you buy through them we may earn a commission, at no extra cost to you.

The best cheap Ethernet cable tester for most home troubleshooting is a basic RJ45 continuity or wiremap tester with a detachable remote. It can show whether each conductor reaches the far end and whether the pins are open, shorted, crossed or otherwise miswired. Choose a more capable verifier only when you also need cable length, distance to a fault, tone tracing, link/service information or a model-specific PoE check.

That distinction matters: a wiremap pass says the conductors are connected in the expected order; it does not certify Cat 5e, Cat 6 or Cat 6A performance. The picks below are based on published specifications and comparison information, not hands-on testing. Prices, stock and package contents can change, so confirm the exact model and bundle before ordering.

As an Amazon Associate I earn from qualifying purchases.

Special offer. See more information about Outbyte and uninstall instructions. Please review EULA and Privacy policy.

At a glance

Name Best for Key spec Price or tier Checked
TRENDnet TC-NT2 General home checks, including installed runs Wiremap faults, tone generation, transmitter and receiver; Ethernet, USB and BNC testing; up to 300 m test distance Budget/basic category; current retail price varies November 2026
NOYAFA NF-468S Continuity checks when PoE indication is useful Manufacturer lists the NF-468S as a network-cable continuity tester and PoE checker Entry-level; verify current model price and package November 2026
Klein Tools VDV526-100 LAN Explorer Simple RJ45 troubleshooting on a low budget Secondary comparison places it below the $30 tier; no length measurement or PoE detection reported Under-$30 tier in an August 2026 guide; verify today’s price November 2026
Fluke Networks MicroScanner series Advanced diagnosis of difficult or long runs Wiremap, cable length, distance-to-fault and tone; service and PoE functions depend on model Professional step-up; price varies by model November 2026

Prices checked November 2026.

The table deliberately separates a basic tester from a verifier with diagnostic measurements. A higher price does not turn a device into a certification instrument; certification is a different class of test.

What does a cheap Ethernet cable tester actually tell you?

A continuity or wiremap tester sends a signal through each conductor and checks what arrives at the other end. LEDs or a screen then indicate whether the pins appear in the expected order. Depending on the design, it may identify an open (a broken conductor), a short between conductors, reversed or crossed pins, and other miswiring. Exact labels and LED patterns differ, so use the manual for the model you buy.

Popular on Amazon
Sale
Silkland 40Gbps USB C 90 Degree Right Angle Adapter 2 Pack, 240W USB4 | Male to Female Extender, 8K@60Hz, Thunderbolt 4/3, Steam Deck, ROG Ally, MacBook, Switch 2, iPhone 18/17/16/15, Quest 3 VR
  • 【90 Degree Full Function USB C Adapter】Supports the latest USB4 standard for up to 40Gbps of bandwidth, 8K video support, and up to 240W Fast charging; Support USB PD 3.1 Extended Power Range (EPR) including 140W, 180W and 240W. Your productivity is easily doubled. *Warm Tip: For the best fit, please make sure the USB-C port is fully exposed; thick or bulky cases may affect compatibility.
  • 【Reliable Quality】Made from high-quality, scratch-resistant aluminum alloy, delicate metal frame. get excellent wear resistance and heat dissipation. Non-Slip Design for easier insertion and removal.
  • 【Small and portable】Ultra thin size, ultra compact design, a petite physique that matches the minimalist design of your modern laptops. Coming with a slim figure that won't block the port next to the one it's plugged into.
  • 【Compatibility】Widely work with most usb c, thunderbolt 4/3 devices. Compatibilit for ROG Ally, Steam Deck, Switch, MacBook Pro, Quest 3 VR headset, Surface Book 2, iPhone 18/17/16/15, Samsung Galaxy S23/S22/S21, Note 20/10, Google Pixel, ChromeBook, etc.
  • 【Excellence Customer Support】If you experience any issues or cable failure, simply reach out to our dedicated customer service team. We provide a prompt response within 18 hours, providing you with the necessary technical support to resolve any concerns.

This is enough to answer common home questions such as “did I crimp this Ethernet cable correctly?” or “is the cable broken somewhere in the wall?” It cannot, by itself, establish insertion loss, crosstalk, return loss, bandwidth or a guaranteed 1Gbps/10Gbps category rating. A cable can pass a simple wiremap and still fail under a high-speed link.

For an installed cable, place the main unit at one jack and the supplied remote at the other. The two units communicate through the cable; a tester sitting at only one end cannot prove continuity to a distant room. The TRENDnet TC-NT2, for example, includes a transmitter and receiver for local and remote checks.

Special offer. See more information about Outbyte and uninstall instructions. Please review EULA and Privacy policy.

Which tester fits your home troubleshooting job?

Start with the job rather than the marketing label. “Cat 6 tester” can describe anything from a row of continuity LEDs to a verifier that measures length and faults.

Your task Minimum useful capability What to avoid assuming
Check a short patch lead after crimping RJ45 wiremap/continuity and a clear open/short/miswire indication A pass does not prove category performance
Check a cable whose jacks are in different rooms Main tester plus a detachable remote A local loopback test does not test the whole installed run
Find an unknown cable in a bundle Tone generation and a compatible probe (if tracing is required) Tone is not automatically included with every basic tester
Locate a break in a long run Length and distance-to-fault measurement “Tests up to 300 m” is a test-distance limit, not a measured length result
Investigate a powered network cable A model that explicitly documents PoE checking Continuity LEDs alone do not constitute a PoE load or compliance test

1. Is the TRENDnet TC-NT2 the best basic home choice?

For a broad mix of patch-cable and wall-run problems, the TC-NT2 is the most versatile basic pick in this group. TRENDnet lists Ethernet, USB and BNC testing, proper/severed/short-circuit/cross-connected pin results, tone generation, a separate transmitter and receiver, and a stated maximum cable length for checking of 300 metres (984 feet) on its product page.

The separate transmitter and receiver are important if one outlet is upstairs or in another room. Connect the main unit to one end, put the receiver on the far jack, start the test and interpret the pin sequence shown by the unit. For a loose patch cable, the receiver can simply remain beside the main unit.

Do not read the 300 m figure as a built-in cable-length measurement. It is the maximum run length TRENDnet specifies for pin-configuration checking. The page also says the listed battery is not included, so check the required battery size and kit contents before beginning a job.

Special offer. See more information about Outbyte and uninstall instructions. Please review EULA and Privacy policy.

TRENDnet’s warning is explicit: Not designed for live wires. Connecting tester to a live wire may damage the tester. Disconnect the cable from switches, routers, injectors and other equipment before testing. The TC-NT2 is a continuity and wiring tool, not proof that a powered Ethernet circuit is safe or standards-compliant.

Also popular on Amazon
Sale
Anker USB C Hub, 5-in-1 USBC to HDMI Splitter with 4K Display | 85W Max PD, 1 Powered USB-C 5Gbps & 2 Powered USB-A 3.0 5Gbps Data Ports, for MacBook Pro, MacBook Air, Dell and More (Black)
  • 5-in-1 Connectivity: Equipped with a 4K HDMI port, a 5 Gbps USB-C data port, two 5 Gbps USB-A ports, and a USB C 100W PD-IN port. Note: The USB C 100W PD-IN port supports only charging and does not support data transfer devices such as headphones or speakers.
  • Powerful Pass-Through Charging: Supports up to 85W pass-through charging so you can power up your laptop while you use the hub. Note: Pass-through charging requires a charger (not included). Note: To achieve full power for iPad, we recommend using a 45W wall charger.
  • Transfer Files in Seconds: Move files to and from your laptop at speeds of up to 5 Gbps via the USB-C and USB-A data ports. Note: The USB C 5Gbps Data port does not support video output.
  • HD Display: Connect to the HDMI port to stream or mirror content to an external monitor in resolutions of up to 4K@30Hz. Note: The USB-C ports do not support video output.
  • What You Get: Anker 332 USB-C Hub (5-in-1), welcome guide, our worry-free 18-month warranty, and friendly customer service.

When should you choose it?

  • Choose it when you want one inexpensive unit for RJ45-style wiring checks plus occasional USB or BNC work.
  • Choose it when a remote receiver and tone function are more useful than a numerical length readout.
  • Look elsewhere if your main requirement is distance-to-fault, a documented PoE diagnostic, or certification.

2. Is the NOYAFA NF-468S useful for PoE-related troubleshooting?

NOYAFA’s official page positions the NF-468S as a network-cable continuity tester and PoE checker. That makes it a candidate when you need more than a simple pin map, but the wording does not establish a full PoE load test, negotiated power measurement or cable certification.

The same page shows the NF-468S alongside additional variants. Confirm that the exact model number, remote, adapters, display and PoE function in the package you select match your job; variant names can look similar while offering different features. Treat any PoE indication as model-specific and follow the maker’s instructions for whether connected equipment must be unplugged.

For a home user, this model makes sense when a powered access point, camera or other device is part of the troubleshooting scenario and the product documentation clearly describes the check you need. If you only need to find an open or crossed pair, a simpler wiremap tester may be easier to understand and less expensive.

Special offer. See more information about Outbyte and uninstall instructions. Please review EULA and Privacy policy.

3. Is the Klein Tools VDV526-100 LAN Explorer enough for a cheap cable check?

A secondary budget comparison places the VDV526-100 LAN Explorer below the $30 tier and describes it as a basic RJ45 tester. That makes it a sensible category to consider for quick continuity and wiremap work, provided the current kit includes the remote or accessories required for your setup.

The same comparison reports no cable-length measurement and no PoE detection. Those omissions are not defects if your goal is simply to verify a newly terminated patch cable, but they rule it out for locating a break by distance or checking a powered run. The “under $30” label came from a guide updated in August 2026, not a guaranteed current retail price; verify today’s listing and exact product page.

Before buying, check the displayed fault detail. A sequence of numbered LEDs can confirm an open or reversed pair, while a readable wiremap can make troubleshooting several miswired conductors faster. Neither style certifies category performance.

4. When is a Fluke Networks MicroScanner verifier justified?

The MicroScanner series is a capability step-up for difficult runs rather than the default cheap home tester. Fluke Networks lists wiremap, cable length, distance-to-fault and tone functions across the series, with service and PoE checks varying by model. Select the exact model by the diagnostic you need, not simply by the family name.

Free tools Windows power users keep installed

One-click scans. No signup required.

Special offer. See more information about Outbyte and uninstall instructions. Please review EULA and Privacy policy.
Also popular on Amazon
Sale
Anker USB C Hub, 7in1 Multi-Port USB Adapter, 4K@60Hz USBC to HDMI Splitter | 85W Max PD, 2 USB 3.0 & 1 USBC Data Ports, SD/TF Card Reader, for Laptops/Mac and Other Type C Devices (Charger Not Included)
  • Sleek 7-in-1 USB-C Hub: Features an HDMI port, two USB-A 3.0 ports, and a USB-C data port, each providing 5Gbps transfer speeds. It also includes a USB-C PD input port for charging up to 100W and dual SD and TF card slots, all in a compact design.
  • Flawless 4K@60Hz Video with HDMI: Delivers exceptional clarity and smoothness with its 4K@60Hz HDMI port, making it ideal for high-definition presentations and entertainment. (Note: Only the HDMI port supports video projection; the USB-C port is for data transfer only.)
  • Double Up on Efficiency: The two USB-A 3.0 ports and a USB-C port support a fast 5Gbps data rate, significantly boosting your transfer speeds and improving productivity.
  • Fast and Reliable 85W Charging: Offers high-capacity, speedy charging for laptops up to 85W, so you spend less time tethered to an outlet and more time being productive.
  • What You Get: Anker USB-C Hub (7-in-1), welcome guide, 18-month warranty, and our friendly customer service.

Length and distance-to-fault information can save time when a cable disappears into walls, ceilings or a patch panel. Tone helps identify one cable among many when used with a compatible probe. Service or PoE indicators can help explain why a link is not coming up, but verify the model’s supported standards and test procedure.

MicroScanner devices are verifiers. Fluke maintains a separate certification product category for proving that installed cabling meets a performance standard. If a landlord, contractor, warranty or network specification requires certification, a basic tester or MicroScanner verifier is not a substitute.

How should you compare cheap Ethernet cable testers?

Use these checkpoints before you compare prices or “Cat 6” labels.

  1. Connector support: Confirm the actual connectors and adapters you need. The TC-NT2 documentation lists Ethernet, USB and BNC testing; other models may be RJ45-only. Do not assume an RJ11, coax or USB adapter is included unless the package says so.
  2. Remote workflow: For an in-wall run, require a detachable far-end remote. Check whether the remote can be identified, stored or numbered when several outlets are being checked.
  3. Fault detail: Prefer a readable wiremap or explicit open, short and crossed-pin result when you expect more than a simple pass/fail light.
  4. Extra diagnostics: Treat tone, length, distance-to-fault, link/service detection and PoE as separate features. One does not imply the others.
  5. Power and safety: Check battery type, whether a battery is included, and the maker’s instructions about disconnecting live or PoE equipment.
  6. Kit contents: Verify the main unit, remote, leads, adapters, probe requirements, case and manual for the exact SKU. Variant pages can combine several packages.
  7. Verification versus certification: Buy a wiremap tester to find wiring faults; buy a certified test system only when a documented category-performance result is required.

How do I test an Ethernet cable after crimping?

You need the tester, its remote (if supplied), the cable under test and any required battery. Remove both plugs from active network equipment before connecting a basic continuity tester.

Special offer. See more information about Outbyte and uninstall instructions. Please review EULA and Privacy policy.
  1. Inspect both plugs. Look for a jacket that reaches the strain relief, fully seated conductors and consistent pin order. A visual check catches obvious crimps before you interpret electronics.
  2. Insert one plug into the main tester and the other into the remote. If the tester has separate ports for different cable types, select the Ethernet/RJ45 port.
  3. Turn on the tester and run the wiremap or continuity mode. Compare the displayed order with the wiring standard you intended to terminate. Read the model’s legend; LED sequences are not universal.
  4. If the result shows an open, remake the suspect termination or inspect for a broken conductor. If it shows a short or crossed connection, inspect for stray copper, an incorrect pin order or a damaged plug.
  5. Repeat the test after re-terminating. A pass confirms the conductors are connected in the expected map; it does not guarantee network speed.

If a known-good cable works but the new cable fails, the fault is probably in the new terminations. If both fail, check the tester battery, leads and port selection before opening a wall or replacing hardware.

How do I test Ethernet wiring between two rooms?

  1. Unplug both ends from switches, routers, injectors, access points and other powered equipment.
  2. At the first wall jack or patch-panel port, connect the tester’s main unit with a short known-good patch lead if the jack requires one.
  3. Carry the remote to the far-end jack and connect it there. Without a remote, the tester cannot complete a continuity path through the installed cable.
  4. Run the wiremap test and record the result for the outlet label. If several rooms are involved, label each remote or keep a written map so results are not mixed up.
  5. If the map fails, retest directly at the patch panel and wall jack. Testing in sections distinguishes a bad patch lead from a fault in the concealed run.

A basic tester can tell you that conductors reach the far end in a particular order. It cannot tell you whether the cable was installed with the bend radius, separation or termination quality needed for a category-performance guarantee.

Can a cheap tester find a cable break or tell me its length?

Only models with an explicit length or distance-to-fault function can estimate those values. A continuity tester may prove that a conductor is open, but it generally cannot say whether the break is 2 metres or 20 metres from the tester.

Also popular on Amazon
Sale
BENFEI USB C Hub 5-in-1 with 4K HDMI(Certified), 100W Power Delivery, 3 USB-A, Silicone Cable, Aluminum Case Compatible with MacBook Pro/Air, iPad Pro, iMac, iPhone 15 Pro/Pro Max, XPS, Thinkpad
  • Portable and powerful USB-C HUB: BENFEI USB Type-C HUB, with super-soft and knot-free silicone woven design cable, meets most mobile office needs. Compact, lightweight, stylish, and powerful portable USB C Hub equipped with 1 x HDMI port, 1 x 100W charging, and 3 x USB ports. 18-month warranty, 24-hour response, to ensure you feel at ease when using our product.
  • Design centered on comfort and reliability: Thanks to BENFEI's end-to-end in-house cable production capability, in-house PCBA and assembly capability, using the industry's most advanced silicone woven design and process, 20cm cable in length, no knots, super-soft, the HUB is easy to use in all scenarios: laptop, tablet, stand etc. Super-soft, 25000+ life cycles, to meet your daily carrying and office needs.
  • 100W Charging: Support up to 90W USB C pass-through charging via Type-C port to keep your laptop powered. 10W is reserved for other interface operations. No data and video function on the Type-C port.
  • 4K HDMI Display: The HDMI port supports media display at resolutions up to 4K 30Hz, keeping every incredible moment detailed and ultra vivid. Please note that the C port of the Host device needs to support video output.
  • Transfer Files in Seconds: Transfer files and from your laptop at speeds up to 10 Gbps with USB A 3.2 port. Extra 2 USB A 2.0 ports are perfectly for your keyboards and mouse.

The TC-NT2’s 300 m specification is the maximum cable length it supports for pin-configuration checking, not a measured result. The MicroScanner series is the capability step-up when you need length or distance-to-fault data. Treat a model’s “maximum test distance” and “length measurement” as different specifications.

Special offer. See more information about Outbyte and uninstall instructions. Please review EULA and Privacy policy.

What do common wiremap results mean?

Result or symptom Likely interpretation Next action
No light or no response on one pin Open conductor, failed crimp, broken lead or poor contact Reseat plugs, inspect the termination and retest with a known-good lead
Pins appear in the wrong order Miswired or crossed conductors Compare both ends with the intended wiring order and reterminate the incorrect end
Short indication Two conductors touching or a damaged plug/jack Inspect for stray strands, crushed cable and damaged contacts
Intermittent results Loose contact, weak battery, damaged tester lead or movement-sensitive termination Replace the battery if applicable, flex-test carefully and test each segment separately
Wiremap passes but link remains slow or absent Possible performance, equipment, negotiation or installation issue outside continuity Try known-good patch leads and equipment; use a verifier or certification test when the requirement is performance proof

Manufacturers use different names for split pairs, reversals and shorts, so use the supplied legend rather than translating an unfamiliar blink pattern from another tester.

Independent reader supportYour contribution helps us test, update, and keep practical guides available for everyone.Support on Ko-Fi

Are cheap Ethernet testers safe to use on PoE?

Do not connect a basic tester to a live cable unless its documentation explicitly supports that operation. TRENDnet warns that the TC-NT2 is not designed for live wires and may be damaged by a live connection. Disconnect network equipment before ordinary wiremap testing.

PoE checking is model-specific. The NF-468S is listed by its maker as a continuity tester and PoE checker, while the cited budget comparison for the VDV526-100 reports no PoE detection. Even a PoE indicator is not automatically a full load, power-budget or standards-compliance test. Follow the exact model’s procedure and use an appropriate verifier when the safety or installation decision depends on measured PoE behavior.

Does a wiremap pass certify Cat 5e or Cat 6?

No. Wiremap verifies conductor continuity and pin arrangement. Category certification evaluates transmission performance with specialized measurements such as insertion loss, return loss and crosstalk, under the applicable channel or permanent-link limits.

Special offer. See more information about Outbyte and uninstall instructions. Please review EULA and Privacy policy.

Fluke Networks distinguishes its MicroScanner verifier family from its separate certification products. If you need documentation for a commercial handover, warranty or standards requirement, ask for the required certification level and test report rather than relying on a cheap continuity result.

What is the simplest buying decision?

Buy a basic tester with a remote when your problem is “is every wire connected correctly?” The TC-NT2 is the broadest basic option in the available data because it combines remote testing, several connector types and tone generation. Consider the NF-468S when the exact package’s documented PoE-check function matters, and the VDV526-100 when a straightforward RJ45 check is all you need and its current kit meets that requirement.

Also popular on Amazon
𝟒𝐏𝐚𝐜𝐤 𝐔𝐩𝐠𝐫𝐚𝐝𝐞𝐝 USB to USB C Adapter,Type-C Female to A Male Charger Converter for iPhone 18 Charger,iWatch Ultra SE 9 10,iPhone 17 Pro Max 16 15 14,Samsung S25,AirPods,iPad,Car,Xbox
  • 【Read before You Buy】 Note: This adapter is USB 2.0 version and cannot transmit HDM, VGA, or other video signals. Nevertheless, they are fully capable of charging devices,duplicating files, and can be seamlessly integrated with USB-C earphones, wireless network adapters, and SD card adapters.
  • 【Easy to Use and Safe】Thanks to modern manufacturing techniques, we've made these adapters sufficiently compact so that they can remain inserted in your device without noticeable protrusion or inconvenience. This means you don't have to constantly plug and unplug them, reducing the likelihood of wear and misalignment, and making them more convenient to carry around.
  • 【Reliable Quality】Engineered for enhanced durability, durable aluminum alloy shell material,get excellent wear resistance and heat dissipation,the male USB C and female USB connectors & the male USB and female USB C connectors are designed to be plugged and unplugged up to 20000 times. Provides data transfer, device charging, memory space expansion, and additional computer peripherals.
  • 【Think more for you】Do you need to connect a USB-C-enabled device to an odd device that only has USB-A ports? Then these USB-A male to USB-C female adapters are made for you.Simply insert the adapter into the USB-A port on the device, and you can instantly connect your USB-C device to the device that originally didn't have the correct connection port.
  • 【Trusted xiwxi Quality and Service】As a responsible brand seller, you will receive xiwxi's 12-month Quality assurance and lifetime friendly customer service, you're not just buying a product,you're investing in peace of mind with all-round quality and exceptional customer service.

Move up to a MicroScanner model when the time saved by length, distance-to-fault, tone or service information outweighs the cost. In every case, verify the exact model, included accessories, battery, connector support and live-wire/PoE instructions before purchase.

How we picked

The selection prioritizes the task a home user is trying to complete: continuity and wiremap first, then the presence of a far-end remote, fault detail, tone tracing, length or distance-to-fault, PoE/service functions, connector compatibility and clearly stated safety limits. Product capabilities come from the cited manufacturer pages or secondary comparisons; no product was tested for this guide.

Special offer. See more information about Outbyte and uninstall instructions. Please review EULA and Privacy policy.

Frequently Asked Questions

Can I test an Ethernet cable while it is plugged into my router?

Not with an ordinary continuity tester. Disconnect both ends from network equipment first; a live or PoE connection can damage a tester that is not designed for it. Reconnect the equipment only after the wiremap check is complete.

Why does my cable pass wiremap but fail at gigabit speed?

Wiremap checks connection and order, not transmission performance. Excessive untwist at the plug, poor terminations, crosstalk, damaged cable, unsuitable patch leads or an equipment-negotiation problem can still prevent a reliable high-speed link. A verifier or certification instrument is needed when you must document category performance.

Do I need a remote unit for a cable in the wall?

Yes, normally. The main tester and a remote at the far jack complete the circuit through the installed cable; a tester at one end alone cannot prove the distant conductors. Confirm that the remote is included in the exact kit you buy.

What is the difference between cable length and distance to fault?

Length measurement estimates the total cable or link distance. Distance-to-fault estimates how far along the cable an open or short occurs. A tester’s maximum supported test distance, such as a 300 m checking limit, is neither measurement by itself.

What’s actually slowing this PC down?

Pick the symptom - the matching free tool is one click away.

Special offer. See more information about Outbyte and uninstall instructions. Please review EULA and Privacy policy.

Will a PoE checker tell me how much power my device receives?

Not necessarily. Some products only indicate PoE presence or identify pairs, while a true load or power-budget test requires more specific hardware and documentation. Check the exact model’s stated PoE functions and limits before relying on the result.

Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon at the time of purchase will apply. Prices as of November 22, 2026 11:29 am GMT+0530.

Leave a Reply

Your email address will not be published. Required fields are marked *

Special offer. See more information about Outbyte and uninstall instructions. Please review EULA and Privacy policy.

Recommended PC Tool
Recommended PC Tool
PC Slower Than It Used to Be?Free scan - under a minute
Outdated Drivers Are Slowing You DownFree scan - exact matches

Two free Windows tools

One Free Minute Could Fix That PC

Before you go - each of these free tools takes about a minute and tackles what quietly slows a Windows PC down.

Special offer. View Outbyte info, uninstall instructions, EULA, and Privacy Policy.