Quick wins for a faster PC:
Fix the driver behind crashes, sound loss and screen glitchesFind Drivers →Repair Windows errors before they cause bigger problemsFix Now →Scan for outdated or missing drivers - takes under a minuteDriver Scan →Some links on this page are affiliate links: if you buy through them we may earn a commission, at no extra cost to you.
To enable high-resolution audio on a Sony Walkman, first identify the exact model, then use its model-specific sound menu. On the NW-ZX706 and NW-ZX707, enable Settings > Sound > High-Res streaming for supported streaming apps; use Direct Source when you want the file played without Sony sound effects. Older NW-A55 players use a different Sound Settings screen, while NW-A100 and NW-ZX500 players require a wired, High-Resolution-capable output for high-resolution playback.
There is no single “best” setting for every recording or headphone. The reliable approach is to confirm model and firmware compatibility, start with a clean signal, then audition one processing option at a time at the same listening level.
As an Amazon Associate I earn from qualifying purchases.
What you need to check before changing any setting
Walkman generations differ in their menus, wireless codecs, firmware requirements and high-resolution limits. Check the model number in Settings > System > About device, on the player body or on its original packaging before following a menu path. A menu shown in a guide for an NW-ZX700 is not necessarily present on an NW-A55, even though both are branded Walkman.
Sony’s model guidance distinguishes the NW-A300 and NW-ZX700 families, which can support wireless high-resolution playback with an LDAC-capable Bluetooth device, from the NW-A100 and NW-ZX500 families, which do not support high-resolution audio wirelessly. The receiving headphones, speaker or amplifier must also support the relevant wireless capability; a Bluetooth connection by itself is not a high-resolution specification.
Popular on Amazon
- 【90 Degree Full Function USB C Adapter】Supports the latest USB4 standard for up to 40Gbps of bandwidth, 8K video support, and up to 240W Fast charging; Support USB PD 3.1 Extended Power Range (EPR) including 140W, 180W and 240W. Your productivity is easily doubled. *Warm Tip: For the best fit, please make sure the USB-C port is fully exposed; thick or bulky cases may affect compatibility.
- 【Reliable Quality】Made from high-quality, scratch-resistant aluminum alloy, delicate metal frame. get excellent wear resistance and heat dissipation. Non-Slip Design for easier insertion and removal.
- 【Small and portable】Ultra thin size, ultra compact design, a petite physique that matches the minimalist design of your modern laptops. Coming with a slim figure that won't block the port next to the one it's plugged into.
- 【Compatibility】Widely work with most usb c, thunderbolt 4/3 devices. Compatibilit for ROG Ally, Steam Deck, Switch, MacBook Pro, Quest 3 VR headset, Surface Book 2, iPhone 18/17/16/15, Samsung Galaxy S23/S22/S21, Note 20/10, Google Pixel, ChromeBook, etc.
- 【Excellence Customer Support】If you experience any issues or cable failure, simply reach out to our dedicated customer service team. We provide a prompt response within 18 hours, providing you with the necessary technical support to resolve any concerns.
Also check firmware before troubleshooting. Sony’s support guidance says NW-A100 and NW-ZX500 players need firmware version 2.0.0 or later for the stated high-resolution playback setup, plus a wired High-Resolution-capable headphone or speaker. Read Sony’s model and connection requirements before assuming that instructions for one generation apply to another.
| Walkman family | Relevant high-resolution route | Important limitation |
|---|---|---|
| NW-ZX706 / NW-ZX707 | Wired output; wireless high-resolution with a compatible LDAC device; High-Res streaming option for supported apps | Streaming-app support varies; Sony recommends wired connection for better sound quality |
| NW-A300 series | Wireless high-resolution with an LDAC-capable Bluetooth device | Exact menu labels and app behavior depend on the model and software |
| NW-A55 family | Wired playback with EQ, DSEE HX and other Sound Settings | Sound adjustments are invalid while transmitting over Bluetooth |
| NW-A100 / NW-ZX500 | Wired High-Resolution-capable headphones or speakers | No high-resolution playback over wireless; firmware 2.0.0 or later is required by Sony’s guidance |
For the most dependable high-resolution path, use wired headphones or speakers that support High-Resolution audio. Sony does not require a particular brand or model. Wireless playback can be convenient, but both the player and the receiving device must support the relevant capability, and some sound controls disappear when Bluetooth is active.
How do I turn on High-Res streaming on an NW-ZX706 or NW-ZX707?
On these two models, the High-Res streaming switch changes how music from supported third-party apps is processed by the Walkman. It does not prove that the streaming service supplied a native high-resolution source. The switch is therefore a player-processing control, not a guarantee about the service’s catalogue, subscription tier or master.
- From the WALKMAN Home screen, swipe up to open the apps and settings area.
- Open Settings, then choose Sound.
- Tap High-Res streaming and turn the switch on.
- Open a supported music app and play a track. If the app is unsupported, the option may have no effect even though it is enabled.
Sony’s NW-ZX706/NW-ZX707 Help Guide specifies the player’s processing path for music streamed by apps other than Music player: with High-Res streaming enabled, playback is up-converted to 192 kHz/32 bit; with it disabled, the path is 48 kHz/16 bit. Those are Walkman playback-processing values, not evidence that the service’s original stream contained 192 kHz/32-bit data. A 44.1 kHz or compressed source can still be processed to the stated output path without gaining information that was absent at the source. See Sony’s High-Res streaming instructions for current compatibility notes.
How do I play a file without sound effects?
Use Direct Source when you want the original file signal without Sony sound effects. Sony describes it as outputting “the file’s original sound quality directly without applying any sound effects.” It is a clean-signal choice, not an enhancement mode and not a separate high-resolution format.
- Open the Walkman’s Sound adjustment screen.
- Select Direct Source and turn it on.
- Leave Direct Source off if you want to use the equalizer, DSEE Ultimate, Dynamic Normalizer or other sound adjustments.
If the menu is unavailable during playback, pause or stop the track and reopen the sound-adjustment screen. Direct Source prevents the other sound adjustments from being selected. DSD Remastering also disables the other adjustments, so do not expect Direct Source, DSD Remastering and the equalizer to operate as independent layers.
Do these 3 things before closing this tab:
1Fix the driver behind crashes, sound loss and screen glitches2Repair Windows errors before they cause bigger problems3Scan for outdated or missing drivers - takes under a minuteAlso popular on Amazon
- 5-in-1 Connectivity: Equipped with a 4K HDMI port, a 5 Gbps USB-C data port, two 5 Gbps USB-A ports, and a USB C 100W PD-IN port. Note: The USB C 100W PD-IN port supports only charging and does not support data transfer devices such as headphones or speakers.
- Powerful Pass-Through Charging: Supports up to 85W pass-through charging so you can power up your laptop while you use the hub. Note: Pass-through charging requires a charger (not included). Note: To achieve full power for iPad, we recommend using a 45W wall charger.
- Transfer Files in Seconds: Move files to and from your laptop at speeds of up to 5 Gbps via the USB-C and USB-A data ports. Note: The USB C 5Gbps Data port does not support video output.
- HD Display: Connect to the HDMI port to stream or mirror content to an external monitor in resolutions of up to 4K@30Hz. Note: The USB-C ports do not support video output.
- What You Get: Anker 332 USB-C Hub (5-in-1), welcome guide, our worry-free 18-month warranty, and friendly customer service.
Bluetooth and USB audio output can disable particular effects or all sound adjustments. A control that is unavailable is often a consequence of the active output route rather than a fault. Sony lists these interactions in its NW-ZX706/NW-ZX707 sound-adjustment guide.
Should I use Direct Source, DSEE Ultimate or the equalizer?
Choose according to the result you want: Direct Source for no added processing, DSEE Ultimate for Sony’s upscaling, an equalizer for tonal balance, and Dynamic Normalizer for smaller volume jumps between tracks. None is established by Sony’s documentation as universally best. A setting that sounds attractive on one headphone can make another headphone too bright, bass-heavy or congested.
| Setting | What it changes | When to try it |
|---|---|---|
| Direct Source | Passes the file’s original sound without sound effects | Use as the neutral baseline or when you want the least processing |
| DSEE Ultimate | Upscales audio files | Audition with compressed or lower-resolution material if you prefer its presentation |
| Equalizer | Changes the balance of frequency bands | Correct a tonal preference or compensate for headphones you know well |
| Dynamic Normalizer | Moderates loudness differences between tracks | Useful for mixed albums or playlists with distracting level changes |
| DSD Remastering | Uses a separate remastering path | Try only if you prefer its character; it blocks other adjustments |
For a fair personal comparison, play the same passage, match loudness as closely as possible, start with Direct Source, and then enable only one effect. Change one variable at a time and write down what you hear. A louder option can seem better even when the tonal change is not preferred, so avoid judging settings at different volumes. Compare vocals, cymbals, bass transients and quiet details rather than relying on a quick impression from an entire album.
How do I change sound quality on an NW-A55?
The NW-A55 family does not use the NW-ZX706/NW-ZX707 menu path. Its sound-quality controls are reached from the playback screen.
Crashes, No Sound, or Screen Glitches?
Random freezes, missing sound and display glitches usually trace back to one bad driver. Find and replace yours safely.Free scan · under a minutePC Slower Than It Used to Be?
A free scan shows the junk files, broken settings and background clutter dragging Windows down - then fixes them in one click.Free scan · Windows 10 & 11- Start playback and open the playback-screen menu.
- Choose Settings > Sound Settings. Sony may label the category simply Sound.
- Alternatively, swipe upward on the playback screen to open the sound-quality setting screens.
- Swipe left or right to move among Equalizer, DSEE HX, DC Phase Linearizer, VPT, Dynamic Normalizer and Vinyl Processor.
ClearAudio+ applies Sony’s recommended combination of sound-quality settings. Turn ClearAudio+ off before changing individual Sound Settings. DSEE HX is an upscaling option, while the equalizer provides presets and custom frequency bands. These effects are optional processing, not requirements for a file to qualify as high-resolution.
When the NW-A55 is transmitting over Bluetooth, Sony says its sound adjustments are invalid. To hear the selected EQ or processing, switch to a supported wired output and verify that the effect is still enabled. If a setting appears to be on but makes no audible difference over Bluetooth, this documented limitation is the first thing to check.
Also popular on Amazon
- Sleek 7-in-1 USB-C Hub: Features an HDMI port, two USB-A 3.0 ports, and a USB-C data port, each providing 5Gbps transfer speeds. It also includes a USB-C PD input port for charging up to 100W and dual SD and TF card slots, all in a compact design.
- Flawless 4K@60Hz Video with HDMI: Delivers exceptional clarity and smoothness with its 4K@60Hz HDMI port, making it ideal for high-definition presentations and entertainment. (Note: Only the HDMI port supports video projection; the USB-C port is for data transfer only.)
- Double Up on Efficiency: The two USB-A 3.0 ports and a USB-C port support a fast 5Gbps data rate, significantly boosting your transfer speeds and improving productivity.
- Fast and Reliable 85W Charging: Offers high-capacity, speedy charging for laptops up to 85W, so you spend less time tethered to an outlet and more time being productive.
- What You Get: Anker USB-C Hub (7-in-1), welcome guide, 18-month warranty, and our friendly customer service.
See the NW-A55 family sound-quality guide for the on-screen sequence and each effect’s controls.
Can I get high-resolution audio over Bluetooth?
It depends on both the Walkman family and the receiving device. Sony groups the NW-A300 and NW-ZX700 series as supporting wireless high-resolution playback with an LDAC-capable Bluetooth device. The NW-A100 and NW-ZX500 series do not support high-resolution audio over wireless; use a wired High-Resolution-capable headphone or speaker instead.
LDAC support on the receiving headphones or speaker is essential for the supported wireless route. A standard Bluetooth connection does not guarantee high-resolution transmission, and the Walkman’s available sound effects can change when Bluetooth is active. Pairing successfully is not the same as confirming the intended codec or sound quality.
On the NW-ZX700 series, Sony recommends wired connection for better sound quality. Use wired listening when maximum compatibility, the least signal conversion and access to more sound controls matter more than convenience. Use LDAC when freedom from a cable is more important and both ends of the connection support it.
| Listening route | Strength | Trade-off |
|---|---|---|
| Wired headphones or speakers | Most predictable high-resolution path and broadest compatibility | Requires a cable and a compatible output device |
| LDAC Bluetooth | Wireless high-resolution capability on supported A300 and ZX700 families | Requires LDAC at the receiving end; some effects become unavailable |
| Other Bluetooth connection | Convenient for casual listening | Does not by itself establish high-resolution playback |
| USB audio output | Can feed an external USB audio system | On NW-ZX706/NW-ZX707, sound adjustments are disabled |
Why can’t I select a sound effect?
First check whether Direct Source or DSD Remastering is enabled; each blocks the other sound adjustments. Then check the output route: Sony documents that Bluetooth disables DC Phase Linearizer, Vinyl Processor and DSD Remastering on the NW-ZX706/NW-ZX707, while USB audio output disables sound adjustments. On the NW-A55, sound adjustments are invalid during Bluetooth transmission.
If the option is still unavailable, pause playback, disconnect and reconnect the headphones, and reopen the Sound screen. Confirm that the player is not sending audio to a USB device or Bluetooth receiver. Finally, verify that you are following the guide for the exact model rather than a similar-looking Walkman generation. Identical branding does not mean identical controls.
What’s actually slowing this PC down?
Pick the symptom - the matching free tool is one click away.
Also popular on Amazon
- Portable and powerful USB-C HUB: BENFEI USB Type-C HUB, with super-soft and knot-free silicone woven design cable, meets most mobile office needs. Compact, lightweight, stylish, and powerful portable USB C Hub equipped with 1 x HDMI port, 1 x 100W charging, and 3 x USB ports. 18-month warranty, 24-hour response, to ensure you feel at ease when using our product.
- Design centered on comfort and reliability: Thanks to BENFEI's end-to-end in-house cable production capability, in-house PCBA and assembly capability, using the industry's most advanced silicone woven design and process, 20cm cable in length, no knots, super-soft, the HUB is easy to use in all scenarios: laptop, tablet, stand etc. Super-soft, 25000+ life cycles, to meet your daily carrying and office needs.
- 100W Charging: Support up to 90W USB C pass-through charging via Type-C port to keep your laptop powered. 10W is reserved for other interface operations. No data and video function on the Type-C port.
- 4K HDMI Display: The HDMI port supports media display at resolutions up to 4K 30Hz, keeping every incredible moment detailed and ultra vivid. Please note that the C port of the Host device needs to support video output.
- Transfer Files in Seconds: Transfer files and from your laptop at speeds up to 10 Gbps with USB A 3.2 port. Extra 2 USB A 2.0 ports are perfectly for your keyboards and mouse.
What is the best practical setup for clean, detailed sound?
Use this baseline before experimenting:
- Confirm the exact Walkman model and check its current firmware.
- Install the firmware version required for the model’s high-resolution feature; Sony specifies version 2.0.0 or later for the NW-A100 and NW-ZX500 setup described above.
- Use wired High-Resolution-capable headphones or speakers when your model requires them or when you want the most predictable signal path.
- For NW-ZX706/NW-ZX707 streaming, enable Settings > Sound > High-Res streaming only after confirming that your music app is supported.
- For an unprocessed local file, enable Direct Source and leave other effects off.
- Listen at a comfortable, matched level, then audition DSEE, EQ or Dynamic Normalizer one at a time.
- Keep the setting that improves your own headphones and recordings; disable effects that add harshness, bass buildup or distracting level changes.
High-resolution labels do not remove the importance of the recording, mastering, headphones or fit. Up-conversion changes the player’s processing path; it cannot recreate source information that was never present in the original stream or file. A well-mastered standard-resolution track can be more enjoyable than a poorly mastered high-resolution release.
What should I do if streaming still sounds ordinary?
Verify that High-Res streaming is enabled on the NW-ZX706/NW-ZX707 and that the app is one Sony supports. Remember that the 192 kHz/32-bit figure describes the Walkman’s up-converted playback path, not necessarily the service’s source quality. Try the same track from a locally stored file, compare wired and supported LDAC playback where available, and keep the route that gives the clearest result without excessive processing.
Check whether the perceived difference is actually volume, tonal balance or the recording itself. Match the level between wired and wireless tests, use the same passage, and avoid changing headphones at the same time as changing the Walkman setting. If an app does not respond to High-Res streaming, that is an app-compatibility limitation rather than proof that the player is defective.
On an NW-A100 or NW-ZX500, do not troubleshoot for a missing wireless high-resolution switch: Sony’s guidance rules out high-resolution playback over wireless for those families. Update to firmware 2.0.0 or later where applicable and use a wired High-Resolution-capable output.
Recommended Free Tools
Common setup pitfalls
- Using the wrong menu path: NW-A55 controls are reached from the playback screen, while NW-ZX706/NW-ZX707 High-Res streaming is under Settings and Sound.
- Confusing up-conversion with source resolution: 192 kHz/32 bit is the ZX706/ZX707 playback-processing path when enabled, not a certification of the streaming service’s original file.
- Expecting every effect to stack: Direct Source and DSD Remastering block other adjustments, and Bluetooth or USB output can remove additional controls.
- Ignoring the receiver: Wireless high-resolution requires an LDAC-capable receiving device on supported families.
- Leaving ClearAudio+ enabled while trying to edit the NW-A55: Sony requires it to be turned off before manual Sound Settings can be adjusted.
- Comparing at different loudness: A louder signal often seems more detailed, so match levels before deciding that one processing mode is better.
How we arrived at these settings
The recommendations above follow Sony’s model-specific support pages and help guides: exact menu paths, documented wireless limits, firmware requirements, processing interactions and the stated 192 kHz/32-bit versus 48 kHz/16-bit streaming paths. Because Sony does not identify one universally best-sounding combination, the final choice is framed as a controlled preference comparison rather than an objective winner.
Frequently Asked Questions
Does a 24-bit or 192 kHz label guarantee better sound on a Walkman?
No. A higher-resolution file or playback path does not guarantee a better recording, mastering or headphone match. The NW-ZX706/NW-ZX707 streaming figures describe the player’s processing route, and up-conversion cannot restore information absent from the source.
Also popular on Amazon
- 【Read before You Buy】 Note: This adapter is USB 2.0 version and cannot transmit HDM, VGA, or other video signals. Nevertheless, they are fully capable of charging devices,duplicating files, and can be seamlessly integrated with USB-C earphones, wireless network adapters, and SD card adapters.
- 【Easy to Use and Safe】Thanks to modern manufacturing techniques, we've made these adapters sufficiently compact so that they can remain inserted in your device without noticeable protrusion or inconvenience. This means you don't have to constantly plug and unplug them, reducing the likelihood of wear and misalignment, and making them more convenient to carry around.
- 【Reliable Quality】Engineered for enhanced durability, durable aluminum alloy shell material,get excellent wear resistance and heat dissipation,the male USB C and female USB connectors & the male USB and female USB C connectors are designed to be plugged and unplugged up to 20000 times. Provides data transfer, device charging, memory space expansion, and additional computer peripherals.
- 【Think more for you】Do you need to connect a USB-C-enabled device to an odd device that only has USB-A ports? Then these USB-A male to USB-C female adapters are made for you.Simply insert the adapter into the USB-A port on the device, and you can instantly connect your USB-C device to the device that originally didn't have the correct connection port.
- 【Trusted xiwxi Quality and Service】As a responsible brand seller, you will receive xiwxi's 12-month Quality assurance and lifetime friendly customer service, you're not just buying a product,you're investing in peace of mind with all-round quality and exceptional customer service.
Do I need special headphones for every Sony Walkman high-resolution mode?
Not every model has the same requirement. Sony specifically requires a wired High-Resolution-capable headphone or speaker for NW-A100 and NW-ZX500 high-resolution playback, while NW-A300 and NW-ZX700 can use a compatible LDAC-capable Bluetooth device.
Why does my Walkman sound different after I connect Bluetooth headphones?
Bluetooth changes the available signal path and can disable certain effects. On the NW-ZX706/NW-ZX707, Sony lists DC Phase Linearizer, Vinyl Processor and DSD Remastering as unavailable over Bluetooth; the NW-A55 guide says its sound adjustments are invalid while transmitting wirelessly.
Can I use the equalizer while sending Walkman audio by USB?
On the NW-ZX706/NW-ZX707, Sony states that USB audio output disables sound adjustments. Apply EQ on the receiving device instead, or use a supported wired headphone connection directly from the Walkman.
What does High-Res streaming actually change on the NW-ZX706 or NW-ZX707?
For supported third-party apps other than Music player, Sony documents a 192 kHz/32-bit Walkman playback path when enabled and 48 kHz/16-bit when disabled. It changes the player’s processing path and does not prove that the service supplied native 192 kHz/32-bit audio.
The Bottom Line
Identify the exact Walkman first. Use High-Res streaming on supported NW-ZX706/NW-ZX707 apps, Direct Source for an unprocessed signal, and wired High-Resolution-capable headphones when your model requires the wired route. Treat DSEE, EQ, ClearAudio+ and Dynamic Normalizer as optional choices, then compare them at matched volume rather than chasing a universal “best” setting.

