Thanksgiving DealsAmazon USThanksgiving week: Black Friday picks start earlyAmazon US: current deals, useful picks and tech finds.Check DealsSlow PC?RecommendedPC slow today? Run a repair scan before it gets worseResolve common Windows issues and optimize system performance.Scan NowThanksgiving DealsAmazon USDo not wait for the rush - compare today's dealsAmazon US: current deals, useful picks and tech finds.See Picks×
FREEDOM251

Freedom251 › Blog

Slow Wi‑Fi After Fibre Upgrade? How to Find and Fix the Bottleneck

By Freedom251 Team · · 13 min read

Special offer. See more information about Outbyte and uninstall instructions. Please review EULA and Privacy policy.

Some links on this page are affiliate links: if you buy through them we may earn a commission, at no extra cost to you.

Slow Wi‑Fi after upgrading to fibre internet is usually a Wi‑Fi, router, device or home-network problem—not proof that the fibre line is defective. The quickest way to separate those causes is to compare repeated Wi‑Fi tests with a computer connected directly to the router by Ethernet. If the wired connection is also slow, investigate the service, fibre connection box, cable, router ports and ISP. If wired speed is good but Wi‑Fi is poor, focus on placement, distance, walls, interference, router capability and the device itself.

Run the checks below before buying a new router or mesh system. They establish evidence, fix common problems at no cost and show when your provider needs to investigate.

As an Amazon Associate I earn from qualifying purchases.

Free tools Windows power users keep installed

One-click scans. No signup required.

Special offer. See more information about Outbyte and uninstall instructions. Please review EULA and Privacy policy.

What should I check first when Wi‑Fi slows after a fibre upgrade?

Check whether the slowdown exists on a wired connection. A fibre plan reaches your home through the provider’s connection equipment, but your phone or laptop then depends on the router, radio conditions, Ethernet links and its own hardware. As Ofcom explains, “A slow Wi-Fi test does not always mean there is a fault with your broadband line.”

Do not diagnose the line from one speed-test result. Establish a small baseline at different times, test one capable device by Ethernet, then compare the results with Wi‑Fi in the same location. Record the connection type, device, time, test result and whether other people were downloading or streaming.

Popular on Amazon
Sale
Silkland 40Gbps USB C 90 Degree Right Angle Adapter 2 Pack, 240W USB4 | Male to Female Extender, 8K@60Hz, Thunderbolt 4/3, Steam Deck, ROG Ally, MacBook, Switch 2, iPhone 18/17/16/15, Quest 3 VR
  • 【90 Degree Full Function USB C Adapter】Supports the latest USB4 standard for up to 40Gbps of bandwidth, 8K video support, and up to 240W Fast charging; Support USB PD 3.1 Extended Power Range (EPR) including 140W, 180W and 240W. Your productivity is easily doubled. *Warm Tip: For the best fit, please make sure the USB-C port is fully exposed; thick or bulky cases may affect compatibility.
  • 【Reliable Quality】Made from high-quality, scratch-resistant aluminum alloy, delicate metal frame. get excellent wear resistance and heat dissipation. Non-Slip Design for easier insertion and removal.
  • 【Small and portable】Ultra thin size, ultra compact design, a petite physique that matches the minimalist design of your modern laptops. Coming with a slim figure that won't block the port next to the one it's plugged into.
  • 【Compatibility】Widely work with most usb c, thunderbolt 4/3 devices. Compatibilit for ROG Ally, Steam Deck, Switch, MacBook Pro, Quest 3 VR headset, Surface Book 2, iPhone 18/17/16/15, Samsung Galaxy S23/S22/S21, Note 20/10, Google Pixel, ChromeBook, etc.
  • 【Excellence Customer Support】If you experience any issues or cable failure, simply reach out to our dedicated customer service team. We provide a prompt response within 18 hours, providing you with the necessary technical support to resolve any concerns.

How do I tell whether the fibre service or Wi‑Fi is slow?

Use this sequence. It avoids the common mistake of replacing equipment before proving where the bottleneck is.

  1. Choose a stationary computer. Use a reasonably recent desktop or laptop rather than a phone moving between rooms. Install operating-system and network-driver updates if they are pending.
  2. Run several tests. Use a reputable broadband speed checker two or more times, including at a busy period and a quieter period. Note download, upload, latency if shown, the time and whether the test used Ethernet or Wi‑Fi. Speeds can vary by time of day, so one result is not decisive.
  3. Test by Ethernet. Connect the computer directly to a LAN port on the router with a known-good cable. Keep the computer in the same place and stop large downloads on other devices.
  4. Repeat over Wi‑Fi. Disconnect the cable, connect the same computer to the normal Wi‑Fi network and run the tests again from close to the router. Then repeat from the room where the problem is most obvious.
  5. Label the result. Write down whether wired and Wi‑Fi are both slow, only Wi‑Fi is slow, or only one device is slow. That classification determines the next step.

Some fibre installations use an optical network terminal or another connection box between the fibre and router. Do not unplug, bypass or connect directly to that equipment unless your ISP gives a procedure for your exact setup. A direct-to-modem test is not applicable to every fibre service.

Special offer. See more information about Outbyte and uninstall instructions. Please review EULA and Privacy policy.

How should I interpret the comparison?

What you observe Most likely area Next action
Ethernet and Wi‑Fi are both consistently slow Service provisioning, fibre connection box, router, cable, port or ISP issue Check the wired path and contact the provider with dated results
Ethernet is good, Wi‑Fi is slow everywhere Router radio, settings, interference, placement or client limits Apply placement and traffic fixes, then check router capability and updates
Ethernet is good, Wi‑Fi is slow only in distant rooms Coverage, walls, distance or poor mesh/booster placement Reposition the router, then consider a correctly placed mesh system
Only one phone, laptop or tablet is slow That device’s software, adapter, power mode or hardware Update and restart the device, forget and rejoin Wi‑Fi, then compare another client
Results fluctuate sharply at busy times Congestion, wireless contention or variable service conditions Repeat tests at matching times and ask the ISP about local or service issues

Which free fixes should I try before buying equipment?

Start with changes that remove temporary load and improve radio conditions. Apply them one at a time so you can see which change matters.

  1. Restart in the provider’s order. Follow your ISP’s instructions. A common fibre sequence, described by NBN Co, is to power the fibre connection box first, wait for its lights to stabilise, and then power on the router. Do not repeatedly power-cycle equipment while the provider is diagnosing a fault.
  2. Move the router into the open. Put it in a central, elevated position, not on the floor, inside a cabinet or behind a television. Keep vents clear. The best location is usually near the centre of the lived-in area, although the fibre outlet may limit your choices.
  3. Reduce obstacles and interference. Move the router away from thick masonry, metal furniture, cordless-phone bases, microwaves and other electronics. Walls and floors attenuate radio signals; a router hidden in a cupboard cannot compensate with a faster fibre plan.
  4. Pause competing traffic. Stop cloud backups, game downloads, operating-system updates and high-resolution streams while testing. Disconnect idle devices that are generating traffic, but do not unplug essential equipment needed for security or work.
  5. Update router and client software. Install firmware offered by the router’s administration page and updates for the computer, phone or Wi‑Fi adapter. Reboot after an update if the manufacturer or ISP directs you to do so.
  6. Reconnect the affected device. Turn Wi‑Fi off and on, restart the device, and remove then rejoin the saved network if its connection profile may be corrupted. Check another device before changing advanced router settings.

These steps cannot create capacity that the service or hardware does not provide, but they remove many temporary causes without changing your plan.

Why can a wired connection still be slow after upgrading?

A wired test bypasses the radio, but it still travels through several components. The slowest component can limit the whole path. Google’s troubleshooting guidance recommends Cat 5e or Cat 6 Ethernet for internet service faster than 100 Mbps and notes that ports and intervening equipment must support the target rate.

Also popular on Amazon
Sale
Anker USB C Hub, 5-in-1 USBC to HDMI Splitter with 4K Display | 85W Max PD, 1 Powered USB-C 5Gbps & 2 Powered USB-A 3.0 5Gbps Data Ports, for MacBook Pro, MacBook Air, Dell and More (Black)
  • 5-in-1 Connectivity: Equipped with a 4K HDMI port, a 5 Gbps USB-C data port, two 5 Gbps USB-A ports, and a USB C 100W PD-IN port. Note: The USB C 100W PD-IN port supports only charging and does not support data transfer devices such as headphones or speakers.
  • Powerful Pass-Through Charging: Supports up to 85W pass-through charging so you can power up your laptop while you use the hub. Note: Pass-through charging requires a charger (not included). Note: To achieve full power for iPad, we recommend using a 45W wall charger.
  • Transfer Files in Seconds: Move files to and from your laptop at speeds of up to 5 Gbps via the USB-C and USB-A data ports. Note: The USB C 5Gbps Data port does not support video output.
  • HD Display: Connect to the HDMI port to stream or mirror content to an external monitor in resolutions of up to 4K@30Hz. Note: The USB-C ports do not support video output.
  • What You Get: Anker 332 USB-C Hub (5-in-1), welcome guide, our worry-free 18-month warranty, and friendly customer service.

Check the entire wired path

  • Ethernet cable: Replace a damaged, kinked or very old cable with a known-good Cat 5e or Cat 6 cable. Cat 6 is useful for a diagnostic connection, but it is not a speed booster by itself.
  • Router LAN port: Try another LAN port. A port may have a different capability, a fault or a manually configured limit.
  • Computer adapter: Inspect the link speed reported by the operating system. A low negotiated rate can point to the cable, adapter or port rather than the fibre service.
  • Switches and wall sockets: Temporarily remove unmanaged switches, powerline adapters, docking stations and in-wall patching from the test. Test the computer directly at the router first.
  • Router WAN port: Confirm that the router’s internet-facing port supports the speed tier you purchased. A router can have fast Wi‑Fi branding while its WAN or LAN ports remain a bottleneck.

Do not assume a cable labelled “high speed” fixes every limitation. The cable, both ports, the adapter and every device between the computer and router need compatible capabilities. Once the direct router test is healthy, reconnect extra equipment one item at a time to identify a limiting component.

Special offer. See more information about Outbyte and uninstall instructions. Please review EULA and Privacy policy.

Should I replace the router after a fibre upgrade?

Only replace it when the evidence points to the router or when the existing unit cannot support the service and coverage you need. First confirm that the ISP’s supplied router is correctly provisioned and that the direct Ethernet result is healthy. A new router cannot repair a line fault, a poor connection-box signal or a damaged cable.

Evaluate a replacement against the service and home, not its headline wireless number:

  • WAN and LAN ports: They must support the speed tier and any wired devices you intend to connect. Include switches, docks and other downstream hardware in the check.
  • Wi‑Fi generation and clients: A newer radio helps only when your phones, computers and smart-home devices can use it. Older clients may remain limited.
  • Coverage and layout: A single powerful router may suit an open flat, while thick walls or multiple floors may require additional access points or mesh.
  • ISP compatibility: Some providers require specific authentication, VLAN, voice or support settings. Ask the provider whether a third-party router is supported before buying.
  • Firmware support: Regular security and stability updates matter more than a product label alone.
  • Placement options: A router that can be positioned centrally may outperform a technically faster unit left at the edge of the house.

Check the provider’s supported-equipment list and ask whether changing hardware affects technical support. If the ISP supplied the router, request troubleshooting or a replacement before paying for your own.

Will a mesh system fix slow Wi‑Fi in parts of the house?

Mesh can improve coverage when Ethernet is fast near the router but Wi‑Fi becomes weak in distant rooms. It does not increase the fibre service speed, and adding nodes without a placement plan can make performance worse. Ofcom warns that mesh devices can be costly and that too many units may create problems; boosters can also affect speed, while powerline performance depends on the home’s wiring.

What’s actually slowing this PC down?

Pick the symptom - the matching free tool is one click away.

Special offer. See more information about Outbyte and uninstall instructions. Please review EULA and Privacy policy.
Also popular on Amazon
Sale
Anker USB C Hub, 7in1 Multi-Port USB Adapter, 4K@60Hz USBC to HDMI Splitter | 85W Max PD, 2 USB 3.0 & 1 USBC Data Ports, SD/TF Card Reader, for Laptops/Mac and Other Type C Devices (Charger Not Included)
  • Sleek 7-in-1 USB-C Hub: Features an HDMI port, two USB-A 3.0 ports, and a USB-C data port, each providing 5Gbps transfer speeds. It also includes a USB-C PD input port for charging up to 100W and dual SD and TF card slots, all in a compact design.
  • Flawless 4K@60Hz Video with HDMI: Delivers exceptional clarity and smoothness with its 4K@60Hz HDMI port, making it ideal for high-definition presentations and entertainment. (Note: Only the HDMI port supports video projection; the USB-C port is for data transfer only.)
  • Double Up on Efficiency: The two USB-A 3.0 ports and a USB-C port support a fast 5Gbps data rate, significantly boosting your transfer speeds and improving productivity.
  • Fast and Reliable 85W Charging: Offers high-capacity, speedy charging for laptops up to 85W, so you spend less time tethered to an outlet and more time being productive.
  • What You Get: Anker USB-C Hub (7-in-1), welcome guide, 18-month warranty, and our friendly customer service.

Use this mesh decision process

  1. Prove it is a coverage problem. Compare wired speed and Wi‑Fi beside the router, then repeat in the slow room. If Wi‑Fi is poor even beside the router, mesh is not the first fix.
  2. Improve the main router’s position. Move it centrally and higher before adding a node. A small placement change may solve a dead spot.
  3. Choose compatible equipment. Confirm that the mesh works with your ISP arrangement and supports the required WAN/LAN speeds.
  4. Place nodes between, not inside, the dead zone. A satellite needs a strong link to the main unit. Putting it where the signal is already unusable gives it a poor backhaul.
  5. Use wired backhaul when practical. Ethernet between nodes avoids making the wireless link carry both the backhaul and household traffic, but the cable and ports must support the needed rate.
  6. Add the minimum number of nodes. More radios are not automatically better. Test coverage after each addition and remove redundant nodes.

Powerline adapters can be convenient, but their results vary with circuit layout, distance and electrical noise. Treat them as a conditional option rather than a guaranteed fibre-speed solution.

What router settings can affect wireless speed?

Settings can matter, but changing advanced options blindly can disconnect devices or make the network less stable. Start with the manufacturer’s instructions for your exact model and keep a record of the original values.

  • Confirm that the router has not been placed in a low-performance compatibility mode after the upgrade.
  • Check that both wireless bands are enabled if your devices need them, and give the network a clear name so you know which network a device joined.
  • Use automatic channel selection unless a local interference problem is clearly identified and your router documentation recommends a change.
  • Apply channel-width or band-steering changes only when the router maker’s guidance matches your model. Advice for one brand or firmware version is not universal.
  • Review any bandwidth limits, parental controls, guest-network restrictions or scheduled access rules that could affect one device.
  • Update firmware before resetting the router. If you perform a factory reset, export or record connection credentials and custom settings first.

The router troubleshooting guidance from TP-Link illustrates why model-specific instructions matter: channel and wireless-setting remedies depend on the hardware and firmware. Use it as an example of the type of documentation to consult, not as a universal configuration recipe.

How do I troubleshoot one slow phone or computer?

If other devices are fast in the same room, focus on the affected client rather than changing the whole network.

Special offer. See more information about Outbyte and uninstall instructions. Please review EULA and Privacy policy.
  1. Restart the device and install pending operating-system, driver and firmware updates.
  2. Move it beside the router and repeat the test. If it improves nearby, distance, antenna orientation or the device’s radio capability is relevant.
  3. Forget the saved Wi‑Fi network and join it again. Re-enter the password carefully.
  4. Compare the device on another Wi‑Fi network, such as a trusted hotspot, only to determine whether its wireless adapter behaves differently. Avoid exposing sensitive work on an untrusted network.
  5. Check whether a background backup, update or large transfer is using the connection. Let it finish or pause it during the test.
  6. Try Ethernet with an appropriate adapter if available. A good wired result with a poor wireless result points to the client’s Wi‑Fi hardware, driver or radio environment.

Older devices may not support the same Wi‑Fi generation, channel widths or security modes as a newer router. That is a client limitation, not evidence that the fibre provider failed to deliver the plan.

Also popular on Amazon
Sale
BENFEI USB C Hub 5-in-1 with 4K HDMI(Certified), 100W Power Delivery, 3 USB-A, Silicone Cable, Aluminum Case Compatible with MacBook Pro/Air, iPad Pro, iMac, iPhone 15 Pro/Pro Max, XPS, Thinkpad
  • Portable and powerful USB-C HUB: BENFEI USB Type-C HUB, with super-soft and knot-free silicone woven design cable, meets most mobile office needs. Compact, lightweight, stylish, and powerful portable USB C Hub equipped with 1 x HDMI port, 1 x 100W charging, and 3 x USB ports. 18-month warranty, 24-hour response, to ensure you feel at ease when using our product.
  • Design centered on comfort and reliability: Thanks to BENFEI's end-to-end in-house cable production capability, in-house PCBA and assembly capability, using the industry's most advanced silicone woven design and process, 20cm cable in length, no knots, super-soft, the HUB is easy to use in all scenarios: laptop, tablet, stand etc. Super-soft, 25000+ life cycles, to meet your daily carrying and office needs.
  • 100W Charging: Support up to 90W USB C pass-through charging via Type-C port to keep your laptop powered. 10W is reserved for other interface operations. No data and video function on the Type-C port.
  • 4K HDMI Display: The HDMI port supports media display at resolutions up to 4K 30Hz, keeping every incredible moment detailed and ultra vivid. Please note that the C port of the Host device needs to support video output.
  • Transfer Files in Seconds: Transfer files and from your laptop at speeds up to 10 Gbps with USB A 3.2 port. Extra 2 USB A 2.0 ports are perfectly for your keyboards and mouse.

When should I contact the internet provider?

Contact the ISP when wired performance remains below what your plan and equipment should deliver, when the fibre connection box reports an abnormal status, or when the service drops repeatedly. Escalate with evidence rather than only saying “Wi‑Fi is slow.”

Prepare this information

  • Plan name or advertised service tier and the address or account details the provider requests.
  • Several speed results with dates, times, download and upload values, latency if shown, and whether each test was wired or Wi‑Fi.
  • The test computer, Ethernet cable type, router model and the LAN port used.
  • Whether the issue affects every device, only Wi‑Fi, one room or one client.
  • Any connection-box or router light pattern, outage message or recent equipment change.
  • Steps already taken, including the provider-directed restart sequence.

Ask the provider to check line status, provisioning, local incidents and the fibre connection equipment. Ask whether a router or connection-box replacement, technician visit or other remedy carries a charge before authorising it. If the ISP asks for a direct connection to the modem or optical equipment, follow its exact instructions; do not improvise a bypass.

Independent reader supportYour contribution helps us test, update, and keep practical guides available for everyone.Support on Ko-Fi

What mistakes make fibre Wi‑Fi troubleshooting take longer?

  • Relying on one Wi‑Fi test: Wireless results vary with location, time, device and household traffic.
  • Testing beside the router only: This hides a coverage problem in the room where you actually need service.
  • Buying mesh before checking wired speed: Mesh cannot fix a slow incoming service or a bad WAN path.
  • Assuming Cat 6 creates speed: It can remove a cable limitation, but every port and device must support the target rate.
  • Adding many boosters: Extra radios can compete with one another, and placement is more important than quantity.
  • Changing several settings at once: You lose the ability to identify the effective fix and may create a new problem.
  • Resetting without credentials: A factory reset can erase ISP authentication, Wi‑Fi names, passwords and custom rules.
  • Bypassing the fibre box: Fibre installations differ; an unsupported bypass can interrupt service or invalidate support procedures.

What is the shortest decision tree for a slow fibre Wi‑Fi connection?

Use this checklist in order:

  1. Run repeated tests at different times and record conditions.
  2. Test the same capable computer directly to the router by Ethernet.
  3. If wired is slow, replace the test cable, try another LAN port, remove switches and adapters, then contact the ISP with the results.
  4. If wired is good but Wi‑Fi is slow everywhere, restart correctly, move the router into the open, reduce interference, pause traffic and update firmware and client devices.
  5. If wired is good and only distant rooms are slow, optimise router placement before considering a compatible mesh system with carefully placed nodes.
  6. If only one device is slow, update, restart, reconnect and test that device separately.
  7. Replace a router only when its ports, compatibility, age or coverage are demonstrably limiting the result.

How should I compare replacement routers or mesh systems?

There is no universally correct router without knowing the country, ISP, plan speed, home layout and client devices. Compare the features that match your diagnosed limitation:

Special offer. See more information about Outbyte and uninstall instructions. Please review EULA and Privacy policy.
Need What to verify Why it matters
Fast incoming service WAN port and router throughput supported by the ISP A wireless-capable router can still bottleneck the wired path
Fast wired devices LAN port ratings, cable category and switch compatibility One slower link limits devices behind it
Whole-home coverage Layout guidance, node placement and wired-backhaul support Coverage depends on radio paths, not the fibre plan alone
Reliable support ISP compatibility, firmware policy and provider troubleshooting Unsupported equipment can complicate fault diagnosis
Mixed older and newer clients Supported bands, security modes and backward compatibility Older devices may not use the newest capabilities

Details checked November 2026.

Buy only after the wired-versus-Wi‑Fi diagnosis identifies a genuine equipment or coverage need. Keep the original router available until the replacement is configured and the provider confirms that the service works through it.

Bottom line: what is the reliable fix order?

Separate the fibre service from Wi‑Fi first, using repeated tests and a direct Ethernet comparison. Correct placement, interference, traffic, software and the wired path before spending money. If Ethernet remains poor, the ISP and connection equipment need attention; if Ethernet is good, target the router, client or coverage problem specifically. A new router or mesh system is useful only when the evidence shows that old hardware or weak coverage—not the fibre line itself—is the constraint.

Also popular on Amazon
𝟒𝐏𝐚𝐜𝐤 𝐔𝐩𝐠𝐫𝐚𝐝𝐞𝐝 USB to USB C Adapter,Type-C Female to A Male Charger Converter for iPhone 18 Charger,iWatch Ultra SE 9 10,iPhone 17 Pro Max 16 15 14,Samsung S25,AirPods,iPad,Car,Xbox
  • 【Read before You Buy】 Note: This adapter is USB 2.0 version and cannot transmit HDM, VGA, or other video signals. Nevertheless, they are fully capable of charging devices,duplicating files, and can be seamlessly integrated with USB-C earphones, wireless network adapters, and SD card adapters.
  • 【Easy to Use and Safe】Thanks to modern manufacturing techniques, we've made these adapters sufficiently compact so that they can remain inserted in your device without noticeable protrusion or inconvenience. This means you don't have to constantly plug and unplug them, reducing the likelihood of wear and misalignment, and making them more convenient to carry around.
  • 【Reliable Quality】Engineered for enhanced durability, durable aluminum alloy shell material,get excellent wear resistance and heat dissipation,the male USB C and female USB connectors & the male USB and female USB C connectors are designed to be plugged and unplugged up to 20000 times. Provides data transfer, device charging, memory space expansion, and additional computer peripherals.
  • 【Think more for you】Do you need to connect a USB-C-enabled device to an odd device that only has USB-A ports? Then these USB-A male to USB-C female adapters are made for you.Simply insert the adapter into the USB-A port on the device, and you can instantly connect your USB-C device to the device that originally didn't have the correct connection port.
  • 【Trusted xiwxi Quality and Service】As a responsible brand seller, you will receive xiwxi's 12-month Quality assurance and lifetime friendly customer service, you're not just buying a product,you're investing in peace of mind with all-round quality and exceptional customer service.

Frequently Asked Questions

Can a fibre plan be working normally while my phone shows slow Wi‑Fi?

Yes. The phone may be far from the router, connected through several walls, using an older wireless adapter or sharing airtime with other devices. Compare it with a wired computer and with another client in the same room before reporting a line fault.

Do I need Cat 6 Ethernet for every fibre connection?

No. For services above 100 Mbps, Google recommends Cat 5e or Cat 6, but the cable is only one part of the link. The router ports, computer adapter, switches and wall wiring must also support the required rate.

Special offer. See more information about Outbyte and uninstall instructions. Please review EULA and Privacy policy.

Is a Wi‑Fi booster better than a mesh system?

Neither is automatically better. A booster can help a specific dead spot but may reduce usable throughput, while mesh needs correctly placed nodes and can become counterproductive when too many are installed. Improve router placement and verify the coverage problem first.

Should I tell my ISP that Wi‑Fi is slow or that broadband is slow?

Tell the provider both, but lead with the evidence: identify whether a computer connected by Ethernet is also slow, include test times and explain which rooms or devices are affected. This lets support distinguish a service fault from an in-home wireless issue.

Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon at the time of purchase will apply. Prices as of November 22, 2026 11:29 am GMT+0530.

Leave a Reply

Your email address will not be published. Required fields are marked *

Special offer. See more information about Outbyte and uninstall instructions. Please review EULA and Privacy policy.

Recommended PC Tool
Recommended PC Tool
Windows Errors? Fix Them Before They SpreadFree repair scan
Outdated Drivers Are Slowing You DownFree scan - exact matches

Two free Windows tools

One Free Minute Could Fix That PC

Before you go - each of these free tools takes about a minute and tackles what quietly slows a Windows PC down.

Special offer. View Outbyte info, uninstall instructions, EULA, and Privacy Policy.