Some links on this page are affiliate links: if you buy through them we may earn a commission, at no extra cost to you.
A memory test checks whether your computer’s RAM is contributing to crashes, freezes, failed starts, or other instability. Use Windows Memory Diagnostic for a built-in Windows check, Apple Diagnostics on a Mac, or a bootable MemTest86/Memtest86+ USB when you need a test that runs outside the operating system.
A clean run is useful evidence, not a guarantee that every intermittent hardware or software problem is gone. The right procedure depends on your processor architecture, firmware mode (UEFI or legacy BIOS), and—on Macs—whether the machine uses Apple silicon or an Intel processor.
As an Amazon Associate I earn from qualifying purchases.
Do these 3 things before closing this tab:
1Clear out junk files and repair common Windows errors2Fix the driver behind crashes, sound loss and screen glitches3Repair Windows errors before they cause bigger problemsWhich memory test should you use?
Choose the least disruptive method that matches your computer, then use a standalone boot test when the built-in diagnostic is unavailable or its result is inconclusive.
| Computer | First choice | Runs where? | Important limitation |
|---|---|---|---|
| Windows PC | Windows Memory Diagnostic | After a restart, outside the normal desktop session | Exact Windows 11 menus and result-location labels can vary; this guide uses only the general Start-menu route. |
| Intel Mac | Apple Diagnostics | Startup diagnostics environment | Checks several internal components, not only RAM; it does not test software conflicts or external hardware. |
| Apple-silicon Mac | Apple Diagnostics | Startup options and diagnostics | MemTest86 does not support booting on Apple-silicon Macs. |
| Linux PC | MemTest86 or Memtest86+ | Bootable USB, optical disc, network boot, or (for some setups) a Linux bootloader | Firmware, architecture, Secure Boot, and image choice determine whether it starts. |
Before beginning, save open work, connect the computer to reliable power, and record any symptoms and error messages. If you are creating boot media, back up the USB drive first: writing the image can erase its contents.
Popular on Amazon
- Aluminum Slim Computer Side Mount Clip: Compatible with all phones, featuring a portable foldable expansion bracket in sleek black finish
- Upgraded Magnetic Mount Technology: Designed for laptop, desktop monitor, MacBook, iPad and Tesla car screen with stable adsorption, adjustable angle, and dual-screen interaction support for improved office efficiency
- High-End Metal Craftsmanship: Selected high-hardness aluminum alloy with CNC precision machining, matte plating process, delicate texture that is wear-resistant and anti-scratch
- Strong Magnetic Attachment: Features upgraded high strength magnet with 200% increased magnetic force for firm phone attachment, innovative ring-shaped heat dissipation design prevents overheating and ensures no signal interference
- Wide Range of Compatibility: Works with iPhone 18/17/16/15/14/13/12 series including Pro Max/Mini versions, includes 2 metal rings for non-magnetic phones or cases for full device compatibility
How do I run Windows Memory Diagnostic?
Windows includes Windows Memory Diagnostic. It schedules a restart-based check, so you do not have to create a USB drive for the basic test.
- Open the Start menu and search for Windows Memory Diagnostic.
- Open the diagnostic tool and choose the option to restart the computer and check for memory problems. Save files and close applications before accepting the restart.
- Allow the computer to restart and complete the memory check. Do not power it off while the diagnostic is running.
- After Windows starts again, review the diagnostic result using the notification or result interface provided by your Windows installation. Labels and locations can differ between releases, so avoid relying on a screenshot from an older version.
The built-in test is a sensible first step when Windows is unstable because it requires no additional media. A reported error is evidence that the memory subsystem needs attention, but it does not by itself identify whether the cause is a DIMM, a slot, a memory controller, or another hardware issue.
What if Windows Memory Diagnostic reports an error?
Write down the wording of the result and the circumstances in which the failures occur. If the computer has more than one removable memory module, a repair technician can isolate modules and slots systematically; avoid buying replacement RAM solely from a suspicion that has not been confirmed.
If the built-in test is clean but crashes continue, repeat the check when practical and use a standalone boot test. A test that does not report an error only describes that run and its coverage; it does not rule out intermittent faults, overheating, motherboard problems, storage failures, drivers, or application conflicts.
How can I run a standalone memory test on a Windows PC?
A bootable tester is useful when Windows will not stay stable, when you want to test without Windows drivers running, or when the built-in result is unclear. PassMark’s current MemTest86 release is intended for UEFI systems; its documentation identifies an older V4 release for legacy-BIOS computers. It supports x86 and ARM64 hardware, but it does not boot on Apple-silicon Macs. See the MemTest86 download requirements before selecting an image.
Also popular on Amazon
- Anti-Slip Surface - Transform your laptop into a mobile workstation with the AboveTEK portable laptop lap desk. The anti-slip surface provides a strong grip for laptops up to 15.6 inches(Diagonal), while the double rubber strip on the bottom ensures a stable display or typing experience on your lap, couch, or bed.
- Retractable Mouse Pad - Retractable laptop mouse pad extends on both directions for the left/right handed with elevation along the edges for stopping mouse from falling off. The size of laptop tray is 14" X 9.7" and the size of mouse pad is 7.4" X 6.1".
- Effective Heat Shield - The effective heat shield made of sturdy and thick material protects your laptop from overheating. Prioritizes your comfort and safety, an ideal lap pad or board for working anywhere.
- EASY to Carry and Store - With an ergonomic and simplistic design, the lap desk is portable to store in a backpack. Only 15" in size, 2.2 lb of weight and with slim 0.6 inch thickness, it is ready to be easily carried around.
- Widely Applicable - The smooth platform accommodates laptops and tablets up to 15.6 inches(Diagonal), making it a versatile accessory and one of the best gifts for mom, dad, students and professionals. Perfect for use as a laptop bed tray or tablet holder anywhere at home, library, or park.
- Use a USB flash drive with more than 1 GB of capacity, as specified in PassMark’s current USB workflow.
- Copy any files you need from the drive to another location. The image-writing process can erase the selected drive.
- Download the release that matches your computer’s firmware and architecture from the official MemTest86 page.
- Use the supplied USB creation process to write the boot image. Double-check the target drive before confirming.
- Restart the PC and select the USB device from its firmware boot menu. The key and menu name vary by manufacturer, so follow the prompts shown by that computer.
- Let the diagnostic start and complete its run. Record any error addresses, test numbers, or other messages exactly as shown.
- Remove the USB drive when you are finished and restart into Windows.
If the USB does not appear, check whether it was created successfully, whether the PC is using UEFI or legacy BIOS, and whether firmware security settings are preventing the image from starting. Do not use a legacy-BIOS image on a machine that requires a current UEFI workflow, or vice versa.
Quick wins for a faster PC:
Scan for outdated or missing drivers - takes under a minuteDriver Scan →Clear out junk files and repair common Windows errorsFree Scan →How do I use Apple Diagnostics to test Mac memory?
Apple Diagnostics checks internal hardware, including memory, but it is a general hardware diagnostic rather than a RAM-only utility. Apple says it does not test external hardware such as USB devices and does not diagnose software causes such as application or extension conflicts. Read Apple’s Apple Diagnostics instructions for model-specific changes.
Prepare the Mac
- Install available macOS updates if the Mac can start normally.
- Shut down the Mac completely.
- Disconnect external devices other than essential input devices, the display, and network equipment needed for the procedure.
- Place the Mac on a stable surface with adequate ventilation and connect power if possible.
Apple-silicon Mac steps
- Press and hold the Mac’s power button until startup options appear.
- Release the button when the options screen appears.
- Hold Command-D to start Apple Diagnostics.
- Follow the on-screen instructions and wait for the result.
Intel Mac steps
- Press the power button, then immediately hold the D key.
- If diagnostics does not start, restart and try holding Option-D instead.
- Follow the on-screen instructions until the result appears.
The exact screens can vary with the Mac model and macOS version. If Apple Diagnostics displays a reference code, record it precisely. A photograph of the screen can help preserve the characters, but the code itself is the important information to provide to an Apple Store, Apple Authorized Service Provider, or Independent Repair Provider if service is needed.
If the test finds nothing, that means Apple Diagnostics did not report an internal-hardware problem during that run. It does not clear a faulty USB accessory, an incompatible extension, an application, or every intermittent memory failure.
How do I run a memory test on Linux?
For Linux, a bootable MemTest86 or Memtest86+ image tests memory without relying on the installed Linux kernel, desktop, or drivers. The exact route depends on processor architecture, UEFI versus legacy BIOS, and whether Secure Boot is enabled.
The Tool Desk
Outbyte PC Repair FREERepair Windows errors before they cause bigger problemsFix Now →Outbyte Driver Updater FREEScan for outdated or missing drivers - takes under a minuteDriver Scan →Also popular on Amazon
- Spacious Design: Measuring 21.1" wide and 12" deep, our lap desk comfortably fits most laptops up to 15.6". Extra room for accessories ensures convenience.
- Enhanced Functionality: Packed with handy features, including a 5x9" precision tracking mouse pad and a built-in phone slot for seamless work or video calls. Plus, enjoy laptop support with the integrated device ledge.
- Cool Comfort: Enjoy a stable surface with our lap desk's dual bolster cushion, designed for comfort and airflow, keeping your lap cool during extended use.
- Durable Surface: Work with confidence on our lap desk's solid surface, featuring a blush pink color, ensuring optimal air circulation to prevent your laptop from overheating.
- On-the-Go Convenience: With an integrated handle and lightweight design (2.14 lbs), our lap desk is portable for travel or moving around the house, offering flexibility in any space.
Option 1: MemTest86 on a USB drive
- Confirm whether the computer uses UEFI and identify its processor architecture.
- Download the compatible MemTest86 release from PassMark’s official page. The current release requires UEFI; the older V4 release is intended for legacy-BIOS systems.
- Use a USB flash drive larger than 1 GB. Back up its files before writing the image.
- Create the bootable USB using the release’s included procedure.
- Restart Linux and choose the USB device in the firmware boot menu.
- Allow the memory test to run, and record any errors exactly as displayed.
PassMark also documents starting MemTest86 through a Linux bootloader. That route avoids a separate USB on some systems, but the configuration is dependent on the distribution, bootloader, firmware mode, and selected image. Follow the technical documentation at MemTest86 technical information rather than copying a command intended for a different boot setup.
Option 2: Memtest86+
Memtest86+ is an open-source standalone tester. Its project documentation describes USB, CD-ROM, and network-boot methods and includes guidance for Secure Boot. Version 9.00 is identified as a 2026 release dated October 15, 2026. Select the image that matches the boot method and firmware on the computer.
- Download the appropriate Memtest86+ image.
- Back up the target USB drive or other media.
- Write the image using the project’s documented method.
- Reboot and choose the resulting media from the firmware boot menu.
- If Secure Boot blocks startup, use the project’s official Secure Boot instructions before changing firmware settings.
- Record any reported failures and then reboot back to Linux.
How do I make a bootable USB safely?
A bootable USB is convenient, but the writing step is destructive to the selected drive. Treat the drive as disposable until you have confirmed that every needed file has been copied elsewhere.
- Check the drive’s capacity and identity before opening the image-writing utility. PassMark specifies a drive greater than 1 GB for its current MemTest86 USB process.
- Copy documents, installers, and recovery files from the drive to another disk or cloud location.
- Close programs that might be using the drive.
- Choose the official image for your architecture and firmware mode.
- Confirm the target device one more time immediately before writing. Selecting the wrong disk can destroy unrelated data.
- After writing, safely eject the drive. The computer may show unfamiliar partitions or report that the drive needs formatting; do not format it if you still need the boot media.
Windows Memory Diagnostic and Apple Diagnostics do not require this USB process. Use a bootable drive only when you need an operating-system-independent test or when the built-in route is unavailable.
What’s actually slowing this PC down?
Pick the symptom - the matching free tool is one click away.
What do memory-test errors mean?
An error means the selected diagnostic observed behavior it considers inconsistent with reliable memory operation. It is a reason to investigate the hardware path, not an automatic identification of one replaceable part.
Also popular on Amazon
- Full HD Portable Monitor - MNN 15.6inch portable laptop monitor with 1920*1080 resolution, advanced IPS glossy screen support 178° full viewing angle, it renders accurate and bright color, draws you into the video or game with lifelike colors and amazing detail.It can effectively reduce blue light radiation damage, no flickering, eye-care, and make it easier to watch for a long time.A second monitor for working from home.
- Double Type-C Port -For Plug & Play, the MNN monitor provides 2 Full Feature Type-C ports. Only One USB Type-C Cable is required to connect to the power supply & display signal transmission. NOTE: Your device should support thunderbolt 3.0 or USB 3.1 Type C DP ALT-MODE.which supports multiple connect ways to your laptops, PC, Phones, Macbooks, PS5/PS4, Xbox, and Switch.
- Lightweight Ultra Slim for Travel - As a portable external monitor,MNN portable laptop monitor easily accommodate to every suitcase and backpack and stress-free when you are holding it for a long time. They are truly portable computer monitors for travelers, students, gamers,engineers, and everyone.
- Give consideration to work and games - through multiple display modes [Copy Mode/Extended Mode/Second Screen Mode/Portrait Mode], we can bring you a clear second screen in the meeting, and expand the screen anytime and anywhere to improve work efficiency and improve the quality of life. Adjusting to HDR mode can upgrade the image to a new level, providing you with brighter highlights,deeper and more realistic colors, more realistic images, and amazing viewing/gaming experience.
- Powerful Smart Cover - MNN portable external monitor can work in both landscape and portrait mode, can be used as a gaming monitor, screen extender for laptop or phone. Comes with a scratch-proof smart cover made of durable PU leather exterior, doubles as a stand, provides comprehensive protection for this portable computer monitor.
- Record the evidence: capture the tool name, release, test number, address, and any reference code.
- Repeat under the same conditions: a second run can show whether the symptom is reproducible, but a clean rerun does not prove that the original fault was imaginary.
- Check compatibility: verify UEFI versus legacy BIOS, architecture, and Secure Boot requirements for the chosen image.
- Separate hardware from software clues: failures that appear only in one application or after a driver change may have a software cause outside the memory test’s scope.
- Escalate when necessary: use Apple’s reference code with an authorized service route for a Mac, or provide the recorded PC diagnostic output to a qualified repair technician.
Do not interpret a clean run as a lifetime guarantee. A diagnostic samples particular patterns and conditions. Intermittent faults, problems outside RAM, and software-related crashes can remain even when the selected test completes without an error.
Independent reader supportYour contribution helps us test, update, and keep practical guides available for everyone.What should I do when the test will not start?
Start with the least invasive check that matches the failure: restart and retry the built-in diagnostic, verify the boot media, and then confirm firmware compatibility.
- Windows tool never appears: search the Start menu again for the exact name “Windows Memory Diagnostic,” then save your work and choose its restart-based test route.
- USB is missing from the boot menu: recreate the media, verify that the image matches UEFI or legacy BIOS, and try another USB port.
- MemTest86+ is blocked: consult the project’s Secure Boot guidance before changing firmware settings.
- Apple Diagnostics does not launch: shut down fully, disconnect nonessential peripherals, and use the startup sequence for the Mac’s processor type—Command-D after startup options on Apple silicon, or D/Option-D immediately after power-on for Intel.
- The computer becomes unusable during testing: hold the power button only as a last resort, then retry after confirming power and media compatibility. Preserve any displayed code or error text before restarting.
How should I decide whether to seek repair?
Seek qualified service when a diagnostic repeatedly reports errors, Apple Diagnostics supplies a reference code you cannot resolve, or the computer remains unstable after software causes have been considered. Bring the recorded output and explain when the failures occur.
Recommended Free Tools
For Macs, Apple states that users who cannot resolve a diagnostic finding themselves may need service. Apple Diagnostics covers internal hardware, so a clean result does not eliminate external-device or software troubleshooting. For PCs and Linux systems, provide the standalone tester’s exact error details to the technician rather than replacing parts based only on a crash symptom.
Frequently Asked Questions
Do I need a USB drive to test RAM in Windows?
No. Windows Memory Diagnostic is built in and schedules a restart-based check without external media. A USB is useful only when you want an independent boot test such as MemTest86 or Memtest86+.
Also popular on Amazon
- 【Rechargeable Optical Mouse/Energy Saving】:Computer Mouse Built-in Durable Rechargeable Battery,High Cycle Life,No Need Change Battery;Laptop Mouse Wireless Can Be Easily Charged Using the Included USB Cable,Just 2 Hours Charging,Mouse Wireless Can Use Than 5 Days of Working Time and 30 Days of Standby Time,Standby Time is Very Long;Tablet Mouse Will Fall Asleep After 5 Minutes No-Operation to Save Power and Provides Long Term Usage;You Can Wake ipad Mouse Up By Clicking any Button
- 【LED Colorful Breathing Light】:This Wireless Mice With 7 Different Colorful LED Breathing Lights,7 Different Color Changes Randomly While in Use,Offering Soothing Lighting;Creating Cool and Fancy Atmosphere for Office and Gaming,LED Mouse Can Give You More Fun During
- 【Wireless Bluetooth Mouse Dual Mode】:Mouses(BT5.2/3.0 and 2.4 G)Dual Mode Realize the Free Switching of One Wireless Bluetooth Mice Between Two Devices;Bluetooth Mouse Mode Can Connect One Device Through BT5.2/3.0 and Wireless Mouse Mode Another Device Through a 2.4G USB Receiver,No Need to Install any Driver,Plug and Play;Wireless/Bluetooth Technology Provides Powerful and Reliable Connection,Which Can Enables Fast Data Transmission Without Delays or Dropouts,Effective Up to 10 Meters(33 feet)of Range
- 【Silent/Fingerprint-proof】:Silent Laptop Mice Button Silent Click Design Reduces 90% Noises,Help You Concentrate on Your Work、Study Without Disturbing Others Besides You;Apple Mouse Fingerprint-proof Surface Coating Technology Design Gives Your a Skin-Like Touch,The sturdy anti-slip rubber scroll wheel ensures that your hand will not slip when scrolling;Slim Mouse Offers Your Hand Maximum Support and Comfort
- 【Wide Compatibility Wireless Mouse】:Wireless Bluetooth Mouse For Laptop/Computer/Apple/Notebook/Tablet/Macbook/ipad/iPhone;Mice is Compatible With Android/Chromebook/Windows/Vista/Linux/Notebook/Mac OS and Other Bluetooth Devices
Can MemTest86 boot on an Apple-silicon Mac?
No. PassMark’s current documentation says MemTest86 does not support booting on Apple-silicon Macs. Use Apple Diagnostics for that Mac instead.
Why does a bootable memory tester fail when Secure Boot is enabled?
Secure Boot can prevent an image that is not accepted by the firmware from starting. Check Memtest86+’s official Secure Boot instructions before changing firmware settings, and use an image appropriate for the machine’s boot mode.
Crashes, No Sound, or Screen Glitches?
Random freezes, missing sound and display glitches usually trace back to one bad driver. Find and replace yours safely.Free scan · under a minutePC Slower Than It Used to Be?
A free scan shows the junk files, broken settings and background clutter dragging Windows down - then fixes them in one click.Free scan · Windows 10 & 11What should I do with an Apple Diagnostics reference code?
Write it down exactly and provide it when contacting an Apple Store, Apple Authorized Service Provider, or Independent Repair Provider. The code gives the service route a precise record of what the diagnostic reported.
Does Apple Diagnostics test a USB memory stick or an app that keeps crashing?
No. Apple describes the tool as an internal-hardware diagnostic; external hardware and software problems such as application or extension conflicts are outside its stated coverage.

