Recommended Free Tools
Some links on this page are affiliate links: if you buy through them we may earn a commission, at no extra cost to you.
For a Raspberry Pi information ticker that scrolls continuously or changes often, choose a HUB75 RGB LED matrix. For a ticker that shows a small amount of information and updates only occasionally, an e‑ink module is usually the better fit because it keeps its last image without power and is designed for daylight readability. The deciding factors are update cadence, viewing distance, resolution, wiring, software compatibility and the power required by the complete build—not a blanket claim that one display technology is always brighter or more efficient.
At a glance
| Name | Best for | Key spec | Platforms | Checked |
|---|---|---|---|---|
| HUB75 RGB LED matrix panel | Scrolling text, animation and frequent updates | Colorful pixels; panel size and pixel pitch vary | Raspberry Pi with a compatible RGB matrix bonnet/controller | November 2026 |
| DFRobot DFR0591 2.13-inch e‑ink module | Small, mostly static information with daylight viewing | 250×122, black and white, two grayscale levels; 3-second full refresh and 0.5-second partial refresh | Raspberry Pi over SPI with the vendor library; verify model and OS compatibility | November 2026 |
Which display is better for a Raspberry Pi information ticker?
A HUB75 LED matrix is the practical choice when the ticker must move text, show color or refresh repeatedly. LEDs can redraw quickly enough for scrolling and animated layouts, and an RGB panel is visible at a glance when its brightness and pixel pitch suit the room.
As an Amazon Associate I earn from qualifying purchases.
Quick wins for a faster PC:
Scan for outdated or missing drivers - takes under a minuteDriver Scan →Repair Windows errors before they cause bigger problemsFix Now →E‑ink is the stronger choice for a low-change dashboard: a bus departure, room status, weather summary or other compact page that may update every few minutes or hours. The image remains visible after power is removed, but refreshes are comparatively slow and can flash or leave temporary afterimages. Select the display from the ticker’s real update pattern rather than from a universal “LED versus e‑ink” power or brightness ranking.
How does update frequency change the decision?
Update cadence is the first design question. Continuous motion and frequent redraws favor LED; occasional page changes favor e‑ink.
Popular on Amazon
- 【90 Degree Full Function USB C Adapter】Supports the latest USB4 standard for up to 40Gbps of bandwidth, 8K video support, and up to 240W Fast charging; Support USB PD 3.1 Extended Power Range (EPR) including 140W, 180W and 240W. Your productivity is easily doubled. *Warm Tip: For the best fit, please make sure the USB-C port is fully exposed; thick or bulky cases may affect compatibility.
- 【Reliable Quality】Made from high-quality, scratch-resistant aluminum alloy, delicate metal frame. get excellent wear resistance and heat dissipation. Non-Slip Design for easier insertion and removal.
- 【Small and portable】Ultra thin size, ultra compact design, a petite physique that matches the minimalist design of your modern laptops. Coming with a slim figure that won't block the port next to the one it's plugged into.
- 【Compatibility】Widely work with most usb c, thunderbolt 4/3 devices. Compatibilit for ROG Ally, Steam Deck, Switch, MacBook Pro, Quest 3 VR headset, Surface Book 2, iPhone 18/17/16/15, Samsung Galaxy S23/S22/S21, Note 20/10, Google Pixel, ChromeBook, etc.
- 【Excellence Customer Support】If you experience any issues or cable failure, simply reach out to our dedicated customer service team. We provide a prompt response within 18 hours, providing you with the necessary technical support to resolve any concerns.
- Continuous scrolling: A matrix can shift a text column or redraw frames repeatedly, which is the normal use case for a news, chat or queue ticker.
- Periodic snapshots: E‑ink works well when the Pi generates a page, sends one refresh and then leaves the display alone.
- Mixed content: If a headline scrolls every second but a detailed status page changes once an hour, use an LED panel for one unified experience or split the jobs between displays. Do not force e‑ink to behave like an LED sign.
DFRobot explicitly warns that its e‑ink module is not intended for applications requiring frequent data refreshes because a full refresh takes a long time (datasheet). The cited DFR0591 specifies about three seconds for a full refresh and 0.5 seconds for a partial refresh; those figures apply to that module, not every e‑ink panel.
What does an LED-matrix ticker require?
A HUB75 build is a small system rather than a panel that plugs directly into the Pi. You need the matrix, a compatible controller or Raspberry Pi RGB matrix bonnet, a HUB75 cable and a separate 5 V power supply sized for the panel. Adafruit’s documentation states that the Pi cannot power the matrix directly and that current varies with the number of illuminated LEDs (RGB Matrix Bonnet overview).
Free tools Windows power users keep installed
One-click scans. No signup required.
Panel size, pitch and legibility
Panel dimensions and pixel pitch determine how much text fits and how far away it remains readable. A small, tightly packed panel can show more characters but may require a closer viewing distance; a larger-pitch sign is easier to read across a room but has fewer pixels for detailed layouts. Choose the panel after measuring the intended viewing distance and deciding whether the ticker needs one large line, several rows or icons and color.
Brightness and room conditions
LEDs are bright and colorful, but perceived legibility depends on the panel’s size, pixel pitch, brightness setting and ambient light. A brightness level that works in daylight may be uncomfortable in a dark bedroom. Plan for software brightness control or a physical setting, and avoid assuming that every RGB panel has the same optical output.
Also popular on Amazon
- 5-in-1 Connectivity: Equipped with a 4K HDMI port, a 5 Gbps USB-C data port, two 5 Gbps USB-A ports, and a USB C 100W PD-IN port. Note: The USB C 100W PD-IN port supports only charging and does not support data transfer devices such as headphones or speakers.
- Powerful Pass-Through Charging: Supports up to 85W pass-through charging so you can power up your laptop while you use the hub. Note: Pass-through charging requires a charger (not included). Note: To achieve full power for iPad, we recommend using a 45W wall charger.
- Transfer Files in Seconds: Move files to and from your laptop at speeds of up to 5 Gbps via the USB-C and USB-A data ports. Note: The USB C 5Gbps Data port does not support video output.
- HD Display: Connect to the HDMI port to stream or mirror content to an external monitor in resolutions of up to 4K@30Hz. Note: The USB-C ports do not support video output.
- What You Get: Anker 332 USB-C Hub (5-in-1), welcome guide, our worry-free 18-month warranty, and friendly customer service.
Power planning
Use a dedicated 5 V supply connected as specified by the panel and bonnet documentation. The Pi’s own supply does not replace it. Size the supply for the panel and leave practical headroom; actual demand changes with panel dimensions, brightness and how many pixels are lit. Treat vendor estimates as guidance for the documented hardware, not as a universal current figure.
What does an e‑ink ticker require?
An e‑ink module is usually simpler electrically but stricter about refresh behavior and software compatibility. The DFR0591 example is a 250×122 black-and-white panel with two grayscale levels, an SPI interface and a vendor-provided Python setup path (DFRobot product page).
The Tool Desk
Outbyte Driver Updater FREEFix the driver behind crashes, sound loss and screen glitchesFind Drivers →Outbyte PC Repair FREERepair Windows errors before they cause bigger problemsFix Now →Power behavior
According to DFRobot’s specification, the DFR0591 uses 26.4 mW during refresh and 0.017 mW in standby. The manufacturer also states that the last image remains visible when the display is powered off. Those are module figures, not the consumption of the Raspberry Pi, its power supply or a complete enclosure. The Pi may continue drawing power even while the panel is holding an image.
Refresh artifacts
Full refreshes can flash the screen; partial refreshes are quicker but may leave ghosting or afterimages. Build your UI around complete page changes instead of trying to animate every character. If an old symbol remains, schedule a full refresh at a sensible interval and accept the brief flash as part of the technology’s operation.
Also popular on Amazon
- Sleek 7-in-1 USB-C Hub: Features an HDMI port, two USB-A 3.0 ports, and a USB-C data port, each providing 5Gbps transfer speeds. It also includes a USB-C PD input port for charging up to 100W and dual SD and TF card slots, all in a compact design.
- Flawless 4K@60Hz Video with HDMI: Delivers exceptional clarity and smoothness with its 4K@60Hz HDMI port, making it ideal for high-definition presentations and entertainment. (Note: Only the HDMI port supports video projection; the USB-C port is for data transfer only.)
- Double Up on Efficiency: The two USB-A 3.0 ports and a USB-C port support a fast 5Gbps data rate, significantly boosting your transfer speeds and improving productivity.
- Fast and Reliable 85W Charging: Offers high-capacity, speedy charging for laptops up to 85W, so you spend less time tethered to an outlet and more time being productive.
- What You Get: Anker USB-C Hub (7-in-1), welcome guide, 18-month warranty, and our friendly customer service.
Viewing conditions
DFRobot describes the module as sunlight-readable and lists a viewing angle greater than 170 degrees. That makes it attractive for a window, noticeboard or room with strong daylight, but the small 2.13-inch diagonal limits how much information can be shown at comfortable distance. E‑ink is not automatically the best choice for a wall-sized ticker; panel dimensions and type still matter.
LED matrix versus e‑ink: the practical trade-offs
| Decision axis | HUB75 RGB LED matrix | E‑ink module |
|---|---|---|
| Update pattern | Best for scrolling, animation and frequent changes. | Best for static or occasional changes; DFR0591 lists 3 seconds for full and 0.5 seconds for partial refresh. |
| Presentation | Colorful and bright; readability depends on pitch, size, brightness and ambient light. | Black and white with two grayscale levels on DFR0591; sunlight-readable with a listed viewing angle above 170 degrees. |
| Power path | Requires a separate 5 V supply; demand changes with illuminated content. | 26.4 mW refresh and 0.017 mW standby for DFR0591; retains its image without power. |
| Resolution | Depends on the selected panel’s dimensions and pitch. | 250×122 on DFR0591. |
| Integration | Match the HUB75 panel, cable, bonnet/controller and supply; the Pi cannot power the panel directly. | SPI connection and vendor library; check exact Pi model, OS and module revision. |
No controlled, same-size comparison establishes a universal brightness, viewing-distance, lifetime or whole-system power winner. The figures above are the cited module specifications and vendor guidance.
How much power does a Raspberry Pi LED matrix need?
There is no single answer because a matrix’s draw changes with panel size, brightness and the number of illuminated pixels. The reliable rule is to use a separate 5 V supply rated for the selected panel and to follow the bonnet’s wiring guidance. Do not run the panel from the Pi’s 5 V rail as if it were a small peripheral.
- Read the panel’s current guidance and identify whether it describes typical or maximum conditions.
- Account for the brightness level and the worst-case content your software may display, such as a full-color block.
- Use a supply and wiring rated for the panel’s requirement, with short, secure connections.
- Power the Pi and matrix according to the controller documentation, then verify that the panel remains stable while the brightest planned content is shown.
For an e‑ink build, do not multiply the DFR0591’s 0.017 mW standby figure into a claim about the entire system. The Raspberry Pi, storage, network interface and voltage conversion can dominate energy use, especially if the Pi stays on continuously.
Also popular on Amazon
- Portable and powerful USB-C HUB: BENFEI USB Type-C HUB, with super-soft and knot-free silicone woven design cable, meets most mobile office needs. Compact, lightweight, stylish, and powerful portable USB C Hub equipped with 1 x HDMI port, 1 x 100W charging, and 3 x USB ports. 18-month warranty, 24-hour response, to ensure you feel at ease when using our product.
- Design centered on comfort and reliability: Thanks to BENFEI's end-to-end in-house cable production capability, in-house PCBA and assembly capability, using the industry's most advanced silicone woven design and process, 20cm cable in length, no knots, super-soft, the HUB is easy to use in all scenarios: laptop, tablet, stand etc. Super-soft, 25000+ life cycles, to meet your daily carrying and office needs.
- 100W Charging: Support up to 90W USB C pass-through charging via Type-C port to keep your laptop powered. 10W is reserved for other interface operations. No data and video function on the Type-C port.
- 4K HDMI Display: The HDMI port supports media display at resolutions up to 4K 30Hz, keeping every incredible moment detailed and ultra vivid. Please note that the C port of the Host device needs to support video output.
- Transfer Files in Seconds: Transfer files and from your laptop at speeds up to 10 Gbps with USB A 3.2 port. Extra 2 USB A 2.0 ports are perfectly for your keyboards and mouse.
How do I build a HUB75 LED ticker with a Raspberry Pi?
Gather the panel, a matching Raspberry Pi RGB matrix bonnet or controller, a HUB75 cable, a correctly sized 5 V supply, the Pi and a case or mounting method. Confirm that the bonnet supports the exact panel format before buying.
- Choose the panel layout. Record its width, height, pixel pitch and connector arrangement. Decide how many text rows and characters must be visible.
- Verify controller compatibility. Match the panel’s HUB75 connector and scan/layout requirements to the selected bonnet. A listing that contains a panel does not necessarily include the controller, cable or supply.
- Mount and wire with power removed. Connect the HUB75 cable in the documented orientation. Connect the separate 5 V supply to the matrix as instructed; never rely on the Pi to feed panel power.
- Prepare the Pi software. Enable the interfaces and install the matrix library or example code supplied for the bonnet. Start with a static test pattern before adding scrolling logic.
- Set a conservative brightness. Begin low, check readability in the actual room and raise it only as needed. This reduces glare and limits unnecessary current.
- Implement the ticker loop. Render text into a frame buffer, shift it by a fixed number of pixels and delay between frames. Keep network fetching, parsing and drawing separate so a slow feed does not freeze the display.
- Add recovery behavior. Show a short “no data” message if the feed fails, retain the last valid item and restart the display process after a communication error.
Adafruit documents RGB matrix bonnet and HUB75 wiring examples in its Triple LED Matrix Bonnet guide. Use the guide for the exact bonnet and panel combination rather than copying pin assumptions from an unrelated board.
How do I build an e‑ink ticker with a Raspberry Pi?
Use an SPI-capable Pi, the exact e‑ink module revision, its controller wiring and the vendor’s Python library. The DFR0591 documentation is a concrete example, not a guarantee that every Pi model or operating system will work.
- Check compatibility before purchase. DFRobot lists multiple panel-controller revisions and warns of possible issues with some newer Raspberry Pi systems and Pi Zero 2 W. Confirm the revision, Pi model, OS release and library support.
- Enable SPI. Follow the Pi’s interface configuration for your OS, then verify that the SPI device appears before connecting application code.
- Wire the module exactly as documented. Match power, ground, clock, data and control lines to the module’s pinout. Avoid substituting a different e‑ink board’s wiring.
- Run the vendor example. Display a static test page first. Confirm that the panel initializes and that a full refresh completes before integrating network data.
- Design for pages, not animation. Collect all values, render one complete image and refresh only when the content meaningfully changes. Use partial refresh where appropriate and schedule occasional full refreshes to clear ghosting.
- Handle failed updates. Keep the last good image on screen, log the error and retry later. A failed network request should not erase a useful status page.
Raspberry Pi’s official documentation notes that non-official displays may need a vendor device-tree overlay in config.txt; the exact procedure depends on the display and Pi model (display and power documentation).
Also popular on Amazon
- 【Read before You Buy】 Note: This adapter is USB 2.0 version and cannot transmit HDM, VGA, or other video signals. Nevertheless, they are fully capable of charging devices,duplicating files, and can be seamlessly integrated with USB-C earphones, wireless network adapters, and SD card adapters.
- 【Easy to Use and Safe】Thanks to modern manufacturing techniques, we've made these adapters sufficiently compact so that they can remain inserted in your device without noticeable protrusion or inconvenience. This means you don't have to constantly plug and unplug them, reducing the likelihood of wear and misalignment, and making them more convenient to carry around.
- 【Reliable Quality】Engineered for enhanced durability, durable aluminum alloy shell material,get excellent wear resistance and heat dissipation,the male USB C and female USB connectors & the male USB and female USB C connectors are designed to be plugged and unplugged up to 20000 times. Provides data transfer, device charging, memory space expansion, and additional computer peripherals.
- 【Think more for you】Do you need to connect a USB-C-enabled device to an odd device that only has USB-A ports? Then these USB-A male to USB-C female adapters are made for you.Simply insert the adapter into the USB-A port on the device, and you can instantly connect your USB-C device to the device that originally didn't have the correct connection port.
- 【Trusted xiwxi Quality and Service】As a responsible brand seller, you will receive xiwxi's 12-month Quality assurance and lifetime friendly customer service, you're not just buying a product,you're investing in peace of mind with all-round quality and exceptional customer service.
Which software architecture suits each display?
Both choices benefit from separating data collection, layout and rendering, but the timing model differs.
- LED architecture: Fetch feeds on a timer, queue messages, render frames at a steady interval and let the renderer continue even when a feed is unavailable. Use a fixed-width font or measured text widths to prevent clipping during scroll.
- E‑ink architecture: Fetch and validate all data first, compare it with the last rendered state, then issue one page refresh only when something changed. This avoids needless flashes and preserves the panel’s low standby behavior.
- Both: Store configuration outside the rendering code, display the timestamp of the last successful update and provide a local fallback message for network outages.
What compatibility mistakes cause failed builds?
- Assuming every HUB75 panel is interchangeable: Connector, scan pattern, dimensions and controller support must match.
- Omitting the matrix supply: The Pi cannot power a HUB75 panel directly; undervoltage can produce flicker or resets.
- Buying an e‑ink panel without checking revisions: Controller revisions can require different libraries or wiring.
- Ignoring Pi and OS combinations: The DFR0591 documentation specifically flags possible problems on some newer systems and Pi Zero 2 W.
- Using the wrong refresh expectation: E‑ink is not a silent, instant framebuffer. Full refresh flashes and takes seconds on the cited module.
- Overloading a tiny display: A 250×122 monochrome panel cannot present the same amount of information as a larger multi-row RGB matrix.
How should you choose for common ticker projects?
| Project requirement | Recommended direction | Reason |
|---|---|---|
| News headlines moving continuously | HUB75 LED matrix | Scrolling and frequent redraws match LED operation. |
| Bus or train departures updated every few minutes | E‑ink can work if the page is compact | Occasional page refreshes avoid continuous animation; verify the refresh delay is acceptable. |
| Bright, colorful event signage | HUB75 LED matrix | RGB pixels and adjustable brightness provide presentation flexibility. |
| Window-mounted room status | E‑ink module | Sunlight readability and image retention suit a low-change display. |
| Multiple rows of icons, colors and alerts | HUB75 LED matrix | Color and panel-size options provide more visual bandwidth. |
| Battery-conscious sensor snapshot | E‑ink, with the Pi’s own power budget considered | The panel’s standby specification is very low, but the complete Pi system still consumes energy. |
How we picked the recommendation
The recommendation weighs the factors that determine whether a ticker is usable: update cadence, refresh behavior, readability, resolution, interface, controller and power requirements, software support and compatibility risk. It uses the cited DFR0591 specifications and Adafruit’s HUB75 guidance, while avoiding claims that are not supported by a controlled, same-size system comparison.
Final decision checklist
- Will text move continuously, or will the page change only occasionally?
- How far away must the smallest character be readable?
- Do you need color, animation or several rows?
- Can you provide a separate, correctly sized 5 V supply for the matrix?
- Have you confirmed the exact bonnet, panel connector and scan format?
- For e‑ink, have you checked the module revision, Pi model, OS and SPI/library instructions?
- Can your software tolerate a three-second full refresh and occasional flashing?
- Have you budgeted for the complete system rather than the display module alone?
Frequently Asked Questions
Can an e‑ink display show a scrolling Raspberry Pi ticker?
It can show successive pages, but continuous smooth scrolling is a poor fit for the cited module. A 3-second full refresh and visible refresh behavior make a page-at-a-time design more practical; use an LED matrix when motion itself is essential.
Will an e‑ink screen keep working if the Raspberry Pi loses power?
The panel can retain its last image without power, as DFRobot states for the DFR0591. It cannot receive new information until the Pi and display electronics are powered again, so the retained page may become stale.
Do I need a Raspberry Pi bonnet for every LED matrix?
You need a compatible controller or interface, but the exact form may vary. A Raspberry Pi RGB matrix bonnet is one documented approach; verify HUB75 connector, panel layout and software support before assuming a particular bonnet will work.
Why does my e‑ink display show ghosting after several updates?
Partial refreshes trade speed for a greater chance of residual pixels. Use the module’s full-refresh procedure at intervals, redraw complete pages and avoid treating the display like a continuously animated framebuffer.
What’s actually slowing this PC down?
Pick the symptom - the matching free tool is one click away.
Can the Raspberry Pi power both the e‑ink module and an LED matrix?
Do not assume it can power a HUB75 matrix: Adafruit specifies a separate 5 V supply for the panel. The e‑ink module’s low standby figure applies only to that module, so calculate the Pi, display and peripherals as a complete power budget.

