Some links on this page are affiliate links: if you buy through them we may earn a commission, at no extra cost to you.
Yes— the QIDI Plus5 is a compelling high-temperature workhorse if you need large, enclosed prints in engineering filaments. Its 320 × 320 × 300 mm build volume, 370°C nozzle, 120°C bed and actively heated 65°C chamber make it unusually capable for a printer launched at $749 in the United States. Tom’s Hardware found it one of the strongest high-temperature machines it had seen. The important qualification is workflow: rear-mounted filament loading is inconvenient, long-term reliability has not been established by a multi-month independent study, and the optional QIDI Box still does not swap colors reliably. That makes the Plus5 a better choice for large functional parts than for dependable multicolor production.
What is the QIDI Plus5?
The QIDI Plus5 is an enclosed CoreXY fused-filament-fabrication (FFF) printer designed around large, technically demanding parts. QIDI Technology positions it as a bigger, smarter and more affordable successor to the Plus4, while Tom’s Hardware describes it as a high-temperature workhorse. CoreXY motion keeps the printhead moving on a rigid belt-driven system while the bed moves vertically, a layout commonly chosen for fast, large-format machines.
As an Amazon Associate I earn from qualifying purchases.
The Tool Desk
Outbyte PC Repair FREEClear out junk files and repair common Windows errorsFree Scan →Outbyte Driver Updater FREEFix the driver behind crashes, sound loss and screen glitchesFind Drivers →The Plus5’s defining combination is not any single specification. It is the combination of a 320 mm-class print area, active chamber heating and a high-temperature hot end in a sub-$1,000 launch package. Those features target users making brackets, housings, ducts, jigs, fixtures and other functional parts from materials that are harder to print than ordinary PLA.
The evidence available for this model consists of a 2026 Tom’s Hardware hands-on review and QIDI’s 2026 product listing. Tom’s Hardware called it “a great machine for large-scale prints in high-temperature filaments” and concluded that it was one of the best 3D printers it had seen. There is not yet a standardized, multi-month reliability statistic, so those comments should be treated as an expert evaluation rather than a statistical guarantee.
#1 Best Overall
- Read Before You Buy — No Video Output: These adapters support charging and USB 2.0 data transfer, but cannot transmit video signals. Except for standard USB webcams (which use USB data only), they are not compatible with HDMI/DisplayPort cables, video-capable USB-C hubs, or docking stations with video output.
- Convert USB-A Ports to USB-C: Designed to connect USB-C earphones, cables, flash drives, card readers, and other USB-C accessories to standard USB-A ports. Plug-and-play with no drivers or software required.
- Aluminum Alloy Housing: Built with a sturdy aluminum alloy shell that aids in heat dissipation and protects against daily wear and scratches. Designed to maintain a stable and secure connection.
- Compact & Travel-Friendly: The ultra-compact design allows the adapter to stay plugged into your device without blocking adjacent ports or adding bulk, reducing wear and tear on your original USB ports.
- 12-Month Warranty: Backed by a 12-month manufacturer warranty for peace of mind. Designed to meet strict quality control standards for reliable everyday performance.
What are the QIDI Plus5’s key specifications?
The following figures are the manufacturer’s listed specifications unless otherwise noted. Dimensions, electrical requirements, maximum speeds, noise and warranty terms are not established in the supplied material and should be confirmed on the regional product page before purchase.
| Specification | QIDI Plus5 | What it means in practice |
|---|---|---|
| Build volume | 320 × 320 × 300 mm | Enough space for large single-piece functional parts; Tom’s Hardware says this is 18% more volume than the Plus4. |
| Maximum nozzle temperature | 370°C | Provides headroom for high-temperature thermoplastics, provided the correct filament, nozzle and process settings are used. |
| Heated bed | 120°C | Supports adhesion and helps manage shrinkage in materials such as ABS, ASA, nylon and polycarbonate. |
| Active chamber heating | 65°C | Keeps the enclosed build environment warm for materials that are prone to warping or layer-stress problems. |
| Enclosure | Fully enclosed | Helps retain heat and separates the print from room drafts; it also contains a three-stage filtration system. |
| Leveling | Automatic load-cell leveling | Measures nozzle-to-bed contact rather than relying solely on a manually adjusted bed. |
| Connectivity | LAN, Wi‑Fi and USB | Supports network operation as well as local file transfer. |
| Interface | 4-inch touchscreen | Provides on-printer control for setup and print management. |
| Monitoring | 1080p chamber camera | Allows remote visual checks when used with the printer’s connected workflow. |
| Build surface | Double-sided PEI flex plate | Offers two usable surfaces and simplifies part removal by flexing the plate after cooling. |
| Filtration | Three-stage air filtration | Provides onboard filtration in the enclosed printer; it is not a substitute for appropriate room ventilation for every material. |
How large can the QIDI Plus5 print?
The nominal build volume is 320 × 320 × 300 mm. In simple terms, that is the maximum rectangular envelope before accounting for skirts, brims, supports, first-layer margins or model geometry. It is large enough to avoid splitting many practical parts that would have to be divided on a typical desktop machine.
Recommended Free Tools
Tom’s Hardware reports that the volume is 18% greater than the previous Plus4. The percentage is useful for understanding the generational change, but the supplied specifications do not state the Plus4’s exact dimensions, so it should not be converted into a guessed predecessor measurement.
What fits comfortably?
- Large brackets, panels, ducts and equipment covers that would otherwise require multiple sections.
- Functional prototypes where a continuous part is stronger or easier to assemble than a glued split design.
- Jigs and fixtures that need a broad footprint but do not exceed 300 mm in height.
Usable space is always less than the headline envelope once you reserve room for adhesion aids and account for the shape of the model. Tall, narrow parts also require more attention to orientation and support than the raw dimensions suggest.
Does the QIDI Plus5 have a heated chamber?
Yes. QIDI lists active chamber heating to 65°C, in addition to a 120°C heated bed and a 370°C maximum nozzle temperature. This is a significant distinction from printers that merely have a passive enclosure warmed by the bed and hot end.
Rank #2
- 5-in-1 USB-C Hub: Experience comprehensive connectivity featuring a Power Delivery input, two USB-A 2.0 ports, a USB-A 3.0 port, and an HDMI port. (Note: The USB-C power delivery input port is only for connecting an external wall charger to power your laptop and cannot power peripheral devices.)
- 90W Pass-Through Charging: Achieve optimal charging with 90W pass-through power to your laptop, supported by a total input of 100W, with the hub reserving 10W for operational efficiency. (Note: Wall charger not included.)
- Quick Data Transfers: Accelerate your productivity with rapid data transfers using a high-speed 5Gbps USB 3.0 port and two 480Mbps USB 2.0 ports.
- 4K HDMI Display: Enhance your visual experience with a hub capable of delivering 4K resolution at 30Hz in both mirror and extend modes. Please note that this hub is compatible with MacBook (macOS 12 and newer), Windows 10 and 11, ChromeOS, and laptops equipped with DP Alt Mode and Power Delivery. Note: This device is not compatible with Linux.
- What You Get: Anker USB-C Hub (5-in-1, 4K HDMI), welcome guide, 18-month warranty, and our friendly customer service.
A warm chamber reduces temperature swings around the part. For materials that contract substantially as they cool, a stable chamber can reduce corner lift, layer separation and dimensional distortion. It does not eliminate those risks: filament moisture, cooling settings, part orientation, bed preparation and the material’s own shrinkage still matter.
Free tools Windows power users keep installed
One-click scans. No signup required.
Which materials can it print?
Tom’s Hardware and QIDI identify the Plus5 as suitable for ABS, ASA, PA/nylon, polycarbonate, TPU and related engineering materials. PETG is also listed among the natural high-temperature filament categories associated with the printer. These material names describe compatibility potential, not a guarantee that every brand or blend will print perfectly without tuning.
- ABS and ASA: Benefit from the enclosure and heated chamber because they can warp when exposed to cool drafts. ASA is often selected when outdoor weather resistance matters.
- PA/nylon: Can produce tough, wear-resistant parts, but it is especially sensitive to moisture. Dry filament and a tuned profile are essential.
- Polycarbonate: Requires high temperatures and careful control of thermal gradients. The Plus5’s temperature ceiling and chamber heating provide the necessary platform, while the actual result depends on the specific PC formulation.
- TPU: Flexible filament can be printed, but its feeding behavior and desired softness vary widely by formulation and print speed.
- PETG: Usually less demanding than the materials above, yet it still benefits from a clean build surface and a profile matched to the spool.
A 370°C nozzle rating does not mean every component in the filament path is suitable for every exotic material. Check the spool maker’s recommended nozzle, bed and chamber ranges, and use a hardened or otherwise wear-resistant nozzle when the filament contains abrasive fibers. The supplied specifications do not state which nozzle material ships as standard.
How does setup and day-to-day operation work?
The Plus5 is designed to reduce manual calibration. Its load-cell system automatically measures the bed relationship, and the enclosed frame helps maintain a more consistent thermal environment than an open printer. You still need to assemble or position the machine carefully, prepare the build plate and choose a filament profile.
- Place the printer on a rigid, level surface. A large CoreXY machine can transmit motion into a flexible table, so a stable stand is part of print quality even though the exact footprint and weight are not stated here.
- Install and inspect the double-sided PEI flex plate. Clean the chosen surface using the procedure recommended for that plate and ensure it is seated flat before leveling.
- Load filament and run the printer’s initial calibration. The automatic load-cell routine is intended to establish the nozzle-to-bed relationship without a traditional manual corner-by-corner adjustment.
- Choose a material profile and verify drying requirements. Nylon, polycarbonate and many TPU formulations absorb moisture; a wet spool can cause bubbling, weak layers and inconsistent extrusion even when the printer is calibrated.
- Slice a small validation part before committing to a full-volume print. Confirm first-layer adhesion, wall quality, bridging and dimensional fit with the exact spool you plan to use.
- Use LAN, Wi‑Fi or USB according to your workflow. Network transfer is convenient for a workshop, while USB remains useful when the printer is isolated from a local network.
- Monitor the first layers through the 1080p chamber camera or at the machine. Remote viewing can reveal a detached brim or failed first layer early, but it does not replace supervision for a new material.
What is the rear-filament issue?
Tom’s Hardware identifies rear filament loading as awkward. The location can make changing spools, feeding stiff engineering filament and checking the path more cumbersome when the printer is installed close to a wall. Plan access behind the machine before you place it; otherwise a routine spool change may require moving the printer.
Rank #3
- Sleek 7-in-1 USB-C Hub: Features an HDMI port, two USB-A 3.0 ports, and a USB-C data port, each providing 5Gbps transfer speeds. It also includes a USB-C PD input port for charging up to 100W and dual SD and TF card slots, all in a compact design.
- Flawless 4K@60Hz Video with HDMI: Delivers exceptional clarity and smoothness with its 4K@60Hz HDMI port, making it ideal for high-definition presentations and entertainment. (Note: Only the HDMI port supports video projection; the USB-C port is for data transfer only.)
- Double Up on Efficiency: The two USB-A 3.0 ports and a USB-C port support a fast 5Gbps data rate, significantly boosting your transfer speeds and improving productivity.
- Fast and Reliable 85W Charging: Offers high-capacity, speedy charging for laptops up to 85W, so you spend less time tethered to an outlet and more time being productive.
- What You Get: Anker USB-C Hub (7-in-1), welcome guide, 18-month warranty, and our friendly customer service.
How good is the QIDI Plus5’s print quality?
The independent review’s overall verdict is strongly positive for large, high-temperature work, but the supplied evidence does not provide a standardized laboratory score, dimensional-error table or long-term failure rate. It is therefore reasonable to describe the Plus5 as a well-regarded high-temperature workhorse, not to promise a particular tolerance or success rate.
Print quality on a machine in this class is a system result. The rigid CoreXY arrangement, automatic load-cell leveling, heated bed and controlled chamber address major mechanical and thermal variables. The remaining variables include slicer settings, filament moisture, nozzle wear, cooling strategy, support design and the orientation of the part.
How should you evaluate it for engineering parts?
- Print a flat calibration plate to check first-layer consistency across the 320 mm width.
- Print a tall, thin test to observe whether the chamber and enclosure keep the part stable through the full 300 mm height.
- Measure holes, bosses and mating surfaces with calipers rather than judging them visually.
- Repeat the same test after drying a moisture-sensitive spool; a large change indicates the material, not necessarily the printer, was the limiting factor.
- Keep a record of nozzle, bed, chamber and cooling settings for each filament family.
Is the QIDI Box worth buying for multicolor printing?
Buy the optional QIDI Box only if you accept that its color-swapping workflow is not yet dependable. Tom’s Hardware specifically reports that the accessory still does not swap colors reliably. That limitation is decisive for buyers whose primary goal is unattended multicolor production.
For single-color functional printing, the box is not necessary to use the Plus5. A conventional spool setup avoids adding a color-management component to an otherwise straightforward high-temperature workflow. If you need occasional color changes, weigh the value of convenience against the possibility of failed swaps, wasted filament and additional troubleshooting.
What’s actually slowing this PC down?
Pick the symptom - the matching free tool is one click away.
The Plus5’s heated chamber also changes the accessory decision. A color system that works acceptably for low-temperature decorative material may not offer the same convenience with flexible or engineering filaments. The available review does not establish reliable multicolor performance for those materials, so treat any claim of production-ready color automation as unverified.
Rank #4
- Dual Converters, Infinite Potential：Includes 2× USB C male to USB A female adapters and 2× USB A male to USB C female adapters. Perfect for a wide range of uses—tablets with Bluetooth keyboards, expand USB ports on macbook, and more. Two different converters for all your daily needs
- Next-Level 10Gbps & 3A Charging: No more slow 480Mbps, this usb to usb c adapter has a transfer speed of up to 10Gbps, allowing you to do more transferring in less time. This usb adapter fits both USB A and USB C charger, supporting up to 3A fast charging
- Upgraded Exquisite Craftsmanship: With an aluminum alloy housing and metal connector, the usbc to usb adapter is extremely durable and sturdy. Rigorously tested to withstand more than 10,000 times of plugging and unplugging, ensuring long-lasting performance
- Broad Compatible: The usb c to usb adapter widely supports all USB C/ USB A devices like laptops, tablets, cellphones, car chargers, and phone chargers. Such as compatible with MacBook Pro/Air 2023/2022, Thunderbolt 4/3 Devices,Apple MagSafe Watch 9/8/7/SE/Ultra, iPad Pro 2022/2021, Samsung Galaxy S23/S20/S10, and iPhone 17/16/15 Pro. Plug and play
- Please Note: To reach 10Gbps speed, keep the cable under 3.3 ft. For USB A Male to USB C adapters, try flipping the USB C connector. USB C Male to USB A adapters support bidirectional 10Gbps transfer within 3.3 ft
How much does the QIDI Plus5 cost?
Tom’s Hardware reports a United States launch price of $749 for the standalone printer in 2026. The same review lists a $899 Combo launch price. QIDI’s European listing showed €749. These are launch figures tied to specific regions and dates, not a promise of today’s street price, tax treatment, shipping cost or bundle contents.
| Launch listing | Price | Qualification |
|---|---|---|
| Standalone | $749 | United States launch price reported by Tom’s Hardware in 2026. |
| Combo | $899 | United States launch price reported by Tom’s Hardware in 2026; the supplied material does not enumerate every included item. |
| European listing | €749 | Price shown on QIDI’s EU listing; regional taxes, delivery and current availability may change the final total. |
Budget for more than the printer itself. High-temperature materials cost more than basic PLA, nylon and polycarbonate often need drying, and large parts consume more filament and print time. If you are considering the QIDI Box, treat its price as an accessory decision rather than part of the minimum cost of operating the Plus5; the supplied material does not state a current accessory price.
How does the Plus5 compare with other buying options?
The meaningful comparison is not simply “which printer is fastest.” Match the machine to the material, part size and workflow you actually need. The Plus5’s strongest differentiator is the combination of a 320 mm build class and an actively heated 65°C chamber at a $749 United States launch price. Its clearest disadvantage is the unresolved color-swapping workflow.
Do these 3 things before closing this tab:
1Repair Windows errors before they cause bigger problems2Scan for outdated or missing drivers - takes under a minute3Clear out junk files and repair common Windows errors| Decision factor | Why the Plus5 stands out | Question to ask before choosing it |
|---|---|---|
| Large parts | 320 × 320 × 300 mm volume | Will your parts fit without splitting, supports or oversized brims? |
| High-temperature materials | 370°C nozzle, 120°C bed and 65°C chamber | Do your chosen filament profiles require those temperatures, and can you dry the material? |
| Thermal control | Enclosure plus active chamber heating | Can your workspace provide suitable ventilation and clearance around the enclosure? |
| Workflow | Automatic load-cell leveling, touchscreen, camera and three connection methods | Will rear filament access be practical in your intended location? |
| Multicolor | Optional QIDI Box is available | Can you tolerate unreliable color swaps, or is dependable color production essential? |
| Price | $749 standalone at the US 2026 launch | What will filament, drying, shipping, tax and accessories add in your region? |
Because comparable temperature, enclosure, footprint and accessory figures for alternative models are not established here, a numerical head-to-head table would imply precision that the available evidence does not support. Compare those values directly on the current regional pages of any competing printer you are considering.
Independent reader supportYour contribution helps us test, update, and keep practical guides available for everyone.What are the Plus5’s main advantages and disadvantages?
Advantages
- Large 320 × 320 × 300 mm build volume, with 18% more volume than the Plus4 according to Tom’s Hardware.
- 370°C nozzle, 120°C bed and 65°C active chamber heating for demanding thermoplastics.
- Enclosed structure with three-stage filtration.
- Automatic load-cell leveling reduces routine manual calibration.
- LAN, Wi‑Fi and USB connectivity, plus a 4-inch touchscreen and 1080p camera.
- Double-sided PEI flex plate for a practical removable build surface.
- Strong independent review verdict for large, high-temperature prints.
Disadvantages
- Rear filament loading is awkward, especially when the printer is close to a wall.
- The optional QIDI Box does not yet swap colors reliably according to Tom’s Hardware.
- No standardized long-term reliability statistic is available in the supplied evidence.
- Exact footprint, power draw, noise, warranty terms and included nozzle material are not stated here, so they must be checked before ordering.
- High-temperature printing still requires material-specific drying, ventilation and process tuning.
Who should buy the QIDI Plus5?
The Plus5 is a strong fit for makers, design studios, educators and engineers who need large functional parts from ABS, ASA, nylon, polycarbonate, TPU or similar materials. It makes the most sense when one-piece volume and thermal control are worth more than a simple open-frame setup.
Best Value
- 5-in-1 Connectivity: Equipped with a 4K HDMI port, a 5 Gbps USB-C data port, two 5 Gbps USB-A ports, and a USB C 100W PD-IN port. Note: The USB C 100W PD-IN port supports only charging and does not support data transfer devices such as headphones or speakers.
- Powerful Pass-Through Charging: Supports up to 85W pass-through charging so you can power up your laptop while you use the hub. Note: Pass-through charging requires a charger (not included). Note: To achieve full power for iPad, we recommend using a 45W wall charger.
- Transfer Files in Seconds: Move files to and from your laptop at speeds of up to 5 Gbps via the USB-C and USB-A data ports. Note: The USB C 5Gbps Data port does not support video output.
- HD Display: Connect to the HDMI port to stream or mirror content to an external monitor in resolutions of up to 4K@30Hz. Note: The USB-C ports do not support video output.
- What You Get: Anker 332 USB-C Hub (5-in-1), welcome guide, our worry-free 18-month warranty, and friendly customer service.
- Choose it if you regularly outgrow smaller build plates, need an actively heated chamber, or want one enclosed platform for several engineering filaments.
- Choose it cautiously if your printer will sit against a wall, because rear spool access will be inconvenient.
- Look elsewhere if reliable automatic multicolor production is the primary requirement and you cannot accept the QIDI Box limitation.
- Wait for more evidence if your purchase depends on statistically proven multi-year reliability rather than the available hands-on review.
What should you check before ordering?
- Confirm the current price in your country rather than relying on the 2026 launch figures.
- Verify the printer’s external dimensions, weight, power requirements and clearance for the rear filament path.
- Confirm that your room can accommodate an enclosed, actively heated machine and that your ventilation plan matches the materials you intend to print.
- Check current regional warranty, return and spare-part terms.
- Price the filament, drying equipment and replacement wear parts alongside the printer.
- Decide whether you need the standalone machine or a bundle; do not assume the Combo contents without checking the listing.
- Buy the QIDI Box only after accepting that color swaps may fail and require intervention.
QIDI Plus5 review verdict: is it worth it?
The QIDI Plus5 is worth considering—and, for the right user, worth buying—because it combines a genuinely large build volume with the thermal hardware needed for demanding filaments at a launch price below $1,000. Its 370°C nozzle, 120°C bed, 65°C heated chamber, enclosure and automatic leveling address the problems that make large ABS, ASA, nylon and polycarbonate parts difficult on simpler printers.
The recommendation is narrower for multicolor users. The QIDI Box’s unreliable color swapping undermines the reason to pay for an automated color workflow, while rear filament access makes everyday loading less elegant than the headline specifications suggest. Treat the Plus5 as a high-temperature functional printer first and a multicolor platform second. On that basis, Tom’s Hardware’s assessment of it as one of the best high-temperature workhorses is consistent with the capabilities documented by QIDI.
Quick wins for a faster PC:
Clear out junk files and repair common Windows errorsFree Scan →Scan for outdated or missing drivers - takes under a minuteDriver Scan →Repair Windows errors before they cause bigger problemsFix Now →Frequently Asked Questions
Can the QIDI Plus5 print carbon-fiber nylon or other abrasive filaments?
The documented material list includes PA/nylon and related engineering plastics, but it does not specify the standard nozzle’s wear resistance. Carbon-fiber-filled filament can abrade ordinary nozzles, so verify the supplied hardware and plan an appropriate nozzle before committing to abrasive blends.
Does the Plus5 require an external ventilation system?
The printer includes a three-stage filtration system, but the available specifications do not define filtration efficiency for each material or room-size guidance. Follow the filament manufacturer’s safety information and local ventilation requirements instead of treating the filter as a universal substitute for exhaust.
Can I run the QIDI Plus5 without connecting it to Wi‑Fi?
Yes. The listed interfaces include USB as well as LAN and Wi‑Fi, so a local USB workflow is available. The available data does not state whether every camera or remote-management feature works without a network connection.
What is the maximum object height if I use a brim or raft?
The stated 300 mm height is the nominal build-volume limit. A brim or raft consumes space in the XY plane rather than reducing the Z limit directly, but the model, supports and any safety margins must still fit within the slicer’s usable envelope.
Crashes, No Sound, or Screen Glitches?
Random freezes, missing sound and display glitches usually trace back to one bad driver. Find and replace yours safely.Free scan · under a minutePC Slower Than It Used to Be?
A free scan shows the junk files, broken settings and background clutter dragging Windows down - then fixes them in one click.Free scan · Windows 10 & 11Has the QIDI Plus5 been proven reliable over several years?
No multi-month standardized reliability benchmark is established in the available evidence. The positive hands-on review supports its capability as tested, while long-term failure rates, maintenance intervals and ownership statistics remain an open purchasing consideration.
Quick Recap
Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon at the time of purchase will apply.
