Free tools Windows power users keep installed
One-click scans. No signup required.
Some links on this page are affiliate links: if you buy through them we may earn a commission, at no extra cost to you.
Preparing samples for 3D X‑ray chemical imaging starts with the beamline, not the specimen. Confirm the technique (such as X‑ray fluorescence tomography), target elements or chemical states, excitation energies, specimen matrix, required resolution, rotation geometry, and available environment with the facility before cutting, fixing, drying, or mounting anything. Those choices determine the sample’s size, thickness, support, preservation method, and whether the final dataset can be quantified.
There is no universal recipe. A 20–30 micrometre specimen on a pin may suit one tomography instrument, while another requires a cylindrical sample with a composition-dependent diameter. The reliable approach is to define the measurement, preserve the chemistry you intend to map, make the specimen stable and unobstructed through rotation, and verify every dimension and material with the beamline’s current user guide.
As an Amazon Associate I earn from qualifying purchases.
Quick wins for a faster PC:
Repair Windows errors before they cause bigger problemsFix Now →Fix the driver behind crashes, sound loss and screen glitchesFind Drivers →Clear out junk files and repair common Windows errorsFree Scan →What should I decide before preparing a sample?
Write a short measurement brief and send it to the beamline scientist before altering the specimen. The brief should state:
- Technique and signal: X‑ray fluorescence (XRF) tomography, absorption tomography, X‑ray absorption spectroscopy, diffraction, or a combination.
- Elements or chemical states: list every analyte, including low‑Z elements that may require a helium environment or a different detector geometry.
- Energy range: give the intended incident-energy range and absorption edges. For context, the SLRI XTM beamline lists a 5–15 keV operating range, but that is a property of that beamline, not a general specification.
- Specimen and matrix: tissue, cells, plant material, mineral, geological thin section, catalyst, or another material; include expected density and whether it contains heavy or strongly absorbing phases.
- Resolution and field of view: specify voxel size or beam spot, the region that must be reconstructed, and whether chemical quantification is required.
- Geometry: say whether the specimen rotates through 180 or 360 degrees, whether it must remain upright, and what detector clearance is needed.
- Environment: ask whether the measurement is in air, under helium, in a sealed tube, in liquid, or cryogenic, and what restrictions that places on windows, adhesives, and holders.
- Material value: identify which portions are irreplaceable, so the facility can suggest a non-destructive scout scan or a sacrificial test piece.
The BER X‑ray fluorescence imaging guidance emphasizes that the suitable environment depends on the elements measured and that sample topography should be considered relative to the beam diameter. Treat that as a planning prompt, then use the selected beamline’s own dimensions and mounting instructions as the controlling requirements.
Popular on Amazon
- 【90 Degree Full Function USB C Adapter】Supports the latest USB4 standard for up to 40Gbps of bandwidth, 8K video support, and up to 240W Fast charging; Support USB PD 3.1 Extended Power Range (EPR) including 140W, 180W and 240W. Your productivity is easily doubled. *Warm Tip: For the best fit, please make sure the USB-C port is fully exposed; thick or bulky cases may affect compatibility.
- 【Reliable Quality】Made from high-quality, scratch-resistant aluminum alloy, delicate metal frame. get excellent wear resistance and heat dissipation. Non-Slip Design for easier insertion and removal.
- 【Small and portable】Ultra thin size, ultra compact design, a petite physique that matches the minimalist design of your modern laptops. Coming with a slim figure that won't block the port next to the one it's plugged into.
- 【Compatibility】Widely work with most usb c, thunderbolt 4/3 devices. Compatibilit for ROG Ally, Steam Deck, Switch, MacBook Pro, Quest 3 VR headset, Surface Book 2, iPhone 18/17/16/15, Samsung Galaxy S23/S22/S21, Note 20/10, Google Pixel, ChromeBook, etc.
- 【Excellence Customer Support】If you experience any issues or cable failure, simply reach out to our dedicated customer service team. We provide a prompt response within 18 hours, providing you with the necessary technical support to resolve any concerns.
How do I choose a sample size and shape?
Choose the smallest, most uniform volume that still contains enough analyte for the required fluorescence or other signal. Ask the facility for maximum diameter, height, mass, and acceptable absorption before trimming the specimen. Keep the region of interest compact and, where practical, centered on the rotation axis.
Thickness is a compromise. A thicker specimen contains more material and can produce stronger fluorescence, but the incident beam may not penetrate it and fluorescence generated inside may be reabsorbed before reaching the detector. Excess thickness can therefore reduce sensitivity, bias elemental ratios, increase acquisition time, and blur spatial detail. A thinner specimen reduces self-absorption and simplifies modeling, yet may contain too little material for a useful signal. The Chemical Reviews overview of biological X‑ray fluorescence imaging discusses this signal-versus-thickness trade-off; it does not establish one thickness for every sample.
Do not assume a flat section is always better. Tomography can retain internal three-dimensional structure that a section destroys, whereas a thin, uniform section may be preferable when absorption and quantitative self-absorption corrections dominate. Decide whether the scientific question concerns intact architecture or a controlled path length, and make that decision with the beamline.
What do published facility dimensions mean?
Facility numbers illustrate local constraints rather than universal standards. Diamond Light Source I14 describes samples around 20–30 micrometres for its tomography workflow and gives a typical angular increment of 1–2 degrees over 0–180 degrees. Those values apply to that setup and should not be copied into another proposal. The SLRI XTM documentation gives energy and composition-dependent diameter guidance for its own instrument. Always request the current limits for your assigned endstation.
How thick should my sample be?
There is no single correct thickness. Estimate penetration and fluorescence escape at the chosen energy, density, and elemental composition, then confirm the estimate with the beamline scientist. A low-density biological sample and a dense mineral can require very different dimensions even when the target element is the same.
- Identify the most absorbing part. Include matrix minerals, pigments, metal-rich inclusions, embedding media, and any holder or window in the absorption discussion.
- Check both beam directions. In tomography, the effective path length changes as the specimen rotates. A dimension that transmits at zero degrees may become highly absorbing at another angle.
- Allow for fluorescence escape. The emitted X‑ray may be absorbed on its route to the detector, especially for lower-energy lines or heavy matrices.
- Balance signal and resolution. If the specimen is too thin, photon statistics may force long dwell times; if it is too thick, self-absorption and multiple scattering can undermine quantification.
- Use a scout or test piece when possible. A sacrificial fragment can reveal whether the planned energy and geometry are viable without consuming the irreplaceable region.
For low‑Z elements, ask whether helium purge or another low-attenuation path is available. Air absorbs low-energy fluorescence, and a facility may require a different sample-to-detector distance or window material. The BER guidance covers these environment and topography considerations; the beamline’s detector layout remains decisive.
Do these 3 things before closing this tab:
1Clear out junk files and repair common Windows errors2Scan for outdated or missing drivers - takes under a minute3Repair Windows errors before they cause bigger problemsHow do I preserve the chemistry I intend to measure?
Preservation is analyte-specific. Fixation, rinsing, dehydration, embedding, drying, and cryogenic handling can move soluble elements, change oxidation states, or redistribute material between compartments. Agree on the preparation with a beamline scientist and a domain specialist who knows the tissue or material before applying a routine histology protocol.
Also popular on Amazon
- 5-in-1 Connectivity: Equipped with a 4K HDMI port, a 5 Gbps USB-C data port, two 5 Gbps USB-A ports, and a USB C 100W PD-IN port. Note: The USB C 100W PD-IN port supports only charging and does not support data transfer devices such as headphones or speakers.
- Powerful Pass-Through Charging: Supports up to 85W pass-through charging so you can power up your laptop while you use the hub. Note: Pass-through charging requires a charger (not included). Note: To achieve full power for iPad, we recommend using a 45W wall charger.
- Transfer Files in Seconds: Move files to and from your laptop at speeds of up to 5 Gbps via the USB-C and USB-A data ports. Note: The USB C 5Gbps Data port does not support video output.
- HD Display: Connect to the HDMI port to stream or mirror content to an external monitor in resolutions of up to 4K@30Hz. Note: The USB-C ports do not support video output.
- What You Get: Anker 332 USB-C Hub (5-in-1), welcome guide, our worry-free 18-month warranty, and friendly customer service.
Biological tissue and cells
For biological elemental maps, minimize liquid exchanges and document every solution, duration, temperature, and delay. ANSTO’s XFM sample guide notes that formaldehyde fixation and even a short phosphate-buffered saline rinse can disturb metal distributions in some tissue contexts. That does not mean those steps are always forbidden; it means their effect must be evaluated for the specific analyte and tissue.
Possible immobilization routes include chemical fixation, cryo-fixation followed by dehydration or freeze substitution, or an intentionally hydrated preparation. Choose among them by asking:
- Is the target element soluble or membrane-associated?
- Must the oxidation state or ligand environment remain unchanged?
- Will the specimen be measured wet, dehydrated, or frozen?
- Can the holder contain liquid without leaking or adding background?
- Will dehydration cause shrinkage that invalidates the desired spatial scale?
Cryogenic preparation can reduce some chemical movement and beam-damage pathways, but ice attenuates incident and fluorescent X‑rays and can add scatter. The review of synchrotron XFM tomography in hyperaccumulator plants describes why cryogenic choices must be matched to specimen geometry and signal; it is not a blanket recommendation for every tissue.
Plants, microbial samples, and other hydrated specimens
Record the state at collection, the time to immobilization, and whether the sample was exposed to oxygen, light, or a buffer. If a long scan is planned, ask whether the specimen must remain moist, be sealed in a liquid-filled tube, or be frozen. A laboratory micro-CT user guideline reports that dehydration during long scans can cause shrinkage and blur, and discusses keeping some wet specimens moist or scanning them in liquid-filled tubes. That general advice is useful context, but a synchrotron chemical-imaging beamline may impose different restrictions on liquids, windows, and pressure.
Geological and inorganic specimens
Avoid coatings, polishing compounds, adhesives, or mounting media that contain any element of interest. If a thin section is required, tell the facility which trace elements matter before selecting a slide. The Australian Synchrotron user guide recommends fused-silica quartz for geological thin sections and warns that ordinary glass can contribute Fe, As, Rb, Sr, Zr, and Pb background. Verify the recommendation against the actual beam energy and detector geometry.
What should I mount the sample on?
The support is part of the measurement. It can fluoresce, scatter, absorb the beam, shadow the detector, or shed contaminants during preparation. Select it by the elements being measured and by the angular path required for tomography.
| Specimen or measurement | Potential support | Checks before use |
|---|---|---|
| Adherent cells or small biological regions | Silicon nitride window, when compatible with the facility | Confirm window thickness, membrane size, chemical cleanliness, and detector clearance. |
| Geological thin section | Fused silica or quartz slide | Check trace-element background; avoid glass when its Fe, As, Rb, Sr, Zr, or Pb contribution matters. |
| Rotating tomography specimen | Beamline-specified pin, stalk, capillary, or holder | Confirm diameter, adhesive location, rotation clearance, and whether any support may sit behind the sample. |
| Wet or cryogenic specimen | Sealed tube, capillary, or cryo-compatible mount selected with the facility | Check leakage, ice or liquid absorption, thermal contraction, and background from windows or seals. |
Silicon nitride windows are documented for compatible cell and spectroscopy work, but a window that is ideal for a flat scan may be unsuitable for a rotating experiment. Plastic coverslips can contain impurities and add thickness or scatter; ANSTO specifically cautions against them for its biological XFM preparation. Do not substitute a familiar microscope support without checking its elemental background.
Recommended Free Tools
Also popular on Amazon
- Sleek 7-in-1 USB-C Hub: Features an HDMI port, two USB-A 3.0 ports, and a USB-C data port, each providing 5Gbps transfer speeds. It also includes a USB-C PD input port for charging up to 100W and dual SD and TF card slots, all in a compact design.
- Flawless 4K@60Hz Video with HDMI: Delivers exceptional clarity and smoothness with its 4K@60Hz HDMI port, making it ideal for high-definition presentations and entertainment. (Note: Only the HDMI port supports video projection; the USB-C port is for data transfer only.)
- Double Up on Efficiency: The two USB-A 3.0 ports and a USB-C port support a fast 5Gbps data rate, significantly boosting your transfer speeds and improving productivity.
- Fast and Reliable 85W Charging: Offers high-capacity, speedy charging for laptops up to 85W, so you spend less time tethered to an outlet and more time being productive.
- What You Get: Anker USB-C Hub (7-in-1), welcome guide, 18-month warranty, and our friendly customer service.
How do I mount a sample for rotation?
The specimen must remain fixed, centered, and visible to the beam and detector at every angle. Confirm the exact holder and clearance envelope before applying adhesive or trimming the sample.
- Obtain the holder drawing. Ask for the pin, stalk, capillary, or stage specification, including usable length, diameter, mass limit, and any forbidden materials.
- Keep the region of interest near the rotation axis. Eccentric mounting increases the scan radius and may move the region out of the field of view or collide with hardware.
- Leave the angular path open. A support that is harmless in a projection image can block fluorescence or cast a shadow at another angle.
- Secure against translation and rotation. Use only an adhesive or mechanical restraint approved for the environment; document its location so it can be excluded from reconstruction or background models.
- Check balance and clearance at the largest expected radius. Rotate the mounted assembly through the planned range while watching for sag, wobble, cable contact, or collision.
- Label orientation. Mark a non-critical edge or record fiducials so reconstructed coordinates can be related to biological or geological features.
Diamond I14 states its local requirement plainly: “We require samples to be on pins, with nothing behind them in any direction.” This is a beamline-specific rule, not a universal tomography standard. Other instruments use different geometries, so treat the quote as a reminder to obtain the actual facility instruction.
How can I prevent the support from changing the elemental signal?
List every material in the beam path, not only the visible mount: windows, glue, tape, coatings, embedding resin, labels, seals, and protective films. Compare that list with the target elements and likely interference lines. Ask whether the facility can measure a blank support under identical energy and geometry.
For a flat mapping experiment, a blank window or slide can provide a background reference. For tomography, the support rotates and its contribution may vary with angle, so a blank scan alone may not remove all artifacts. Keeping the support outside the detector’s strongest acceptance angles is often preferable, provided the sample remains mechanically stable.
Quartz or fused silica can reduce trace-metal background relative to ordinary glass in geological work, while silicon nitride can offer a thin, compatible platform for cells. Neither is universally clean: the actual grade, thickness, fabrication residues, and beam energy matter. Obtain a certificate or blank spectrum when quantitative results depend on low-level detection.
Should I use a wet, dry, fixed, or cryogenic specimen?
Choose the state that best preserves the target chemistry while meeting absorption, stability, and safety constraints. The right state depends on the analyte and beamline, not on a general preference for dry or frozen samples.
| State | Advantages | Risks to resolve with the facility |
|---|---|---|
| Hydrated or wet | Can preserve native distribution and reduce dehydration shrinkage. | Liquid adds absorption and scatter; evaporation, leakage, pressure, and container background may limit scan time. |
| Chemically fixed | Can immobilize structure for handling and repeated measurements. | Fixative or rinses may redistribute soluble elements or alter chemical states. |
| Dehydrated or freeze-substituted | Often easier to mount and less prone to movement during a long scan. | Shrinkage and extraction can change distances and concentrations; residual solvent may add background. |
| Cryogenic | May limit chemical movement and some radiation damage pathways. | Ice and cryo-containers attenuate X‑rays; thermal contraction and frost can affect alignment. |
Document the interval between collection, immobilization, and measurement. If the sample changes while waiting for beam time, record temperature, humidity, storage medium, and any thawing or rehydration. Those details are necessary to interpret a chemical map even when the mount itself is perfect.
Also popular on Amazon
- Portable and powerful USB-C HUB: BENFEI USB Type-C HUB, with super-soft and knot-free silicone woven design cable, meets most mobile office needs. Compact, lightweight, stylish, and powerful portable USB C Hub equipped with 1 x HDMI port, 1 x 100W charging, and 3 x USB ports. 18-month warranty, 24-hour response, to ensure you feel at ease when using our product.
- Design centered on comfort and reliability: Thanks to BENFEI's end-to-end in-house cable production capability, in-house PCBA and assembly capability, using the industry's most advanced silicone woven design and process, 20cm cable in length, no knots, super-soft, the HUB is easy to use in all scenarios: laptop, tablet, stand etc. Super-soft, 25000+ life cycles, to meet your daily carrying and office needs.
- 100W Charging: Support up to 90W USB C pass-through charging via Type-C port to keep your laptop powered. 10W is reserved for other interface operations. No data and video function on the Type-C port.
- 4K HDMI Display: The HDMI port supports media display at resolutions up to 4K 30Hz, keeping every incredible moment detailed and ultra vivid. Please note that the C port of the Host device needs to support video output.
- Transfer Files in Seconds: Transfer files and from your laptop at speeds up to 10 Gbps with USB A 3.2 port. Extra 2 USB A 2.0 ports are perfectly for your keyboards and mouse.
How do I keep a sample stable during a long scan?
Stability is both mechanical and chemical. A specimen that shifts by a fraction of a voxel can produce reconstruction blur; one that dries or shrinks can create the same appearance as a real concentration gradient.
- Use a rigid attachment close to the region of interest, while keeping adhesive out of the beam path.
- Measure or estimate shrinkage after fixation and dehydration; do not assume dimensions remain unchanged.
- For wet samples, use a sealed, facility-approved container and verify that the liquid level will not change during acquisition.
- For cryogenic work, maintain the specified temperature and minimize frost or condensation during transfer.
- Ask whether a low-dose alignment scan, fiducial marker, or repeated projection can detect drift.
- Record start and end dimensions, orientation, and any visible damage.
The GigaScience laboratory micro-CT guideline is particularly useful for understanding why dehydration and insecure mounting degrade biological scans. Its recommendations should be adapted, not copied, when the experiment measures elemental chemistry at a synchrotron.
How do I avoid geometry and resolution artifacts?
Make the specimen’s topography compatible with the beam spot and the reconstruction field of view. If a surface rises above the intended spot size, different parts of the sample may be illuminated with different intensities or fall outside focus. A lumpy specimen can also create angle-dependent absorption that is difficult to model.
- Trim only after confirming the field of view. Removing a protrusion may improve geometry but can destroy context needed for interpretation.
- Center the useful volume. Keep the region of interest within the detector and beam for all planned angles.
- Use a consistent cross-section. Cylindrical or near-cylindrical shapes can simplify rotating tomography on facilities that request them.
- Separate alignment from acquisition. Ask whether the beamline wants a flat face, a fiducial, or a specific pin height for initial alignment.
- Plan angular sampling with the beamline. I14’s 1–2 degree example is not a universal rule; the required number of projections depends on diameter, resolution, contrast, and reconstruction method.
How do biological and geological samples differ?
The same instrument can image both, but preparation priorities differ. Biology usually prioritizes preserving a mobile, chemically heterogeneous distribution; geology often prioritizes controlling trace-element background and absorption in a dense matrix.
| Decision | Biological tissue or cells | Geological or inorganic specimen |
|---|---|---|
| Primary preservation concern | Redistribution during rinsing, fixation, dehydration, or thawing. | Contamination from slides, coatings, glue, polishing compounds, or inclusions. |
| Common support question | Can a thin silicon nitride window or cryo-compatible holder provide stability without extra signal? | Will the slide contribute Fe, As, Rb, Sr, Zr, Pb, or another target element? |
| Geometry choice | Retain intact structure when internal localization matters; section only when controlled thickness is essential. | Use a thin section for path-length control or a compact volume for intact tomography, depending on the scientific question. |
| Environment question | Will hydration, cryogenic cooling, or sealed liquid best preserve the analyte? | Will density and heavy phases prevent transmission at the selected energy? |
Use the matrix, target element, and desired resolution to make the choice; do not let the availability of a familiar mount decide the experiment.
What’s actually slowing this PC down?
Pick the symptom - the matching free tool is one click away.
What should I send the beamline before shipping the sample?
Send a concise preparation summary, preferably with photographs and a dimensioned sketch:
- Sample identity, origin, collection date, and chain of storage.
- Target elements, expected concentration range, and any chemical-state question.
- Technique, energy range, detector type if known, desired resolution, and scan angular range.
- Overall dimensions, region-of-interest dimensions, density estimate, and whether the specimen is uniform or layered.
- All treatments: rinses, fixatives, stains, coatings, embedding media, dehydration solvents, freeze substitution, or polishing.
- Proposed support and every material that may enter the beam.
- Wet, dry, fixed, frozen, or cryogenic state at shipment and at measurement.
- Photographs from multiple angles, with a scale, plus a drawing showing the intended rotation axis.
- Questions about maximum mass, holder type, clearance, allowable adhesives, environment, and waste or biohazard rules.
Ask the facility to approve the preparation in writing. User guides can be updated, and a requirement that was acceptable for a previous proposal may not fit a new detector, energy, or sample environment.
Also popular on Amazon
- 【Read before You Buy】 Note: This adapter is USB 2.0 version and cannot transmit HDM, VGA, or other video signals. Nevertheless, they are fully capable of charging devices,duplicating files, and can be seamlessly integrated with USB-C earphones, wireless network adapters, and SD card adapters.
- 【Easy to Use and Safe】Thanks to modern manufacturing techniques, we've made these adapters sufficiently compact so that they can remain inserted in your device without noticeable protrusion or inconvenience. This means you don't have to constantly plug and unplug them, reducing the likelihood of wear and misalignment, and making them more convenient to carry around.
- 【Reliable Quality】Engineered for enhanced durability, durable aluminum alloy shell material,get excellent wear resistance and heat dissipation,the male USB C and female USB connectors & the male USB and female USB C connectors are designed to be plugged and unplugged up to 20000 times. Provides data transfer, device charging, memory space expansion, and additional computer peripherals.
- 【Think more for you】Do you need to connect a USB-C-enabled device to an odd device that only has USB-A ports? Then these USB-A male to USB-C female adapters are made for you.Simply insert the adapter into the USB-A port on the device, and you can instantly connect your USB-C device to the device that originally didn't have the correct connection port.
- 【Trusted xiwxi Quality and Service】As a responsible brand seller, you will receive xiwxi's 12-month Quality assurance and lifetime friendly customer service, you're not just buying a product,you're investing in peace of mind with all-round quality and exceptional customer service.
What are the most common preparation failures?
| Observed problem | Likely preparation cause | Useful corrective action |
|---|---|---|
| Weak or missing fluorescence from the target element | Too little material, excessive absorption, an unsuitable energy, or an attenuating window. | Recalculate path length with the beamline, reduce thickness if scientifically acceptable, or change energy/environment. |
| Elemental signal in the blank area | Glass, plastic, glue, resin, coating, or holder contributes the same line. | Measure a blank, replace the support, move the adhesive out of the beam, and document residual background. |
| Blurred reconstruction or double edges | Sample drift, wobble, shrinkage, or an off-axis region of interest. | Improve fixation, rebalance and recenter the mount, maintain hydration or temperature, and repeat alignment. |
| Concentration gradients that do not match structure | Rinsing, fixation, dehydration, thawing, or drying moved the analyte. | Compare with an untreated or differently preserved control and revise the chemistry plan with a specialist. |
| Strong angle-dependent intensity changes | Non-uniform thickness, dense inclusions, support shadowing, or fluorescence self-absorption. | Use a more compact geometry, adjust energy, rotate the support out of the acceptance cone, or apply validated absorption corrections. |
| Collision or blocked detector views | Holder, pin, capillary, or protruding sample enters the angular path. | Use the facility’s clearance drawing and perform a full-angle mechanical check before shipping. |
Details checked November 2026.
Can I prepare one specimen for both flat mapping and tomography?
Sometimes, but the compromise must be explicit. A support and thickness that work for a stationary 2D map may obstruct the detector or create excessive absorption when rotated. Conversely, a compact pin-mounted specimen may be excellent for tomography but provide too little flat area for a high-throughput map.
If both measurements are important, ask the facility whether to mount one specimen for sequential scans, prepare paired specimens, or collect a lower-dose survey before the high-resolution tomography. Keep an unaltered portion whenever possible so that a preparation artifact is not mistaken for a biological or geological feature.
Outdated Drivers Are Slowing You Down
One free scan finds every outdated or missing driver and matches the right update for your exact hardware.Free scan · exact hardware matchWindows Errors? Fix Them Before They Spread
Repair common Windows errors and clear accumulated junk for a smoother, more stable PC - no reinstall needed.Free scan · no reinstallWhat is a practical preparation checklist?
Use this checklist immediately before finalizing the sample:
- Beamline, technique, energy, detector geometry, and angular range are confirmed.
- Target elements or chemical states and the required resolution are written down.
- Maximum diameter, height, mass, and field of view come from the current facility instructions.
- Thickness and density are compatible with transmission and fluorescence escape at every angle.
- Fixation, rinsing, dehydration, cryogenic, or wet handling has been approved for the analyte.
- Every support, adhesive, window, coating, and container material has been checked for background.
- The holder matches the stage, and the region of interest is centered on the rotation axis.
- No support or adhesive blocks the beam, detector, or required angular path.
- The specimen cannot shift, dry, leak, thaw, or shrink beyond the allowed tolerance during acquisition.
- Photographs, dimensions, orientation, treatments, and storage history accompany the shipment.
- A blank support, control specimen, or sacrificial fragment is available if quantitative interpretation depends on background or preservation.
What is the safest overall strategy?
Prepare the measurement before preparing the material. Start with the facility’s geometry and energy, then choose the smallest specimen that transmits adequately, preserve the target chemistry with an agreed protocol, and treat the support and holder as active parts of the experiment. Facility examples such as I14’s pin requirement and 20–30 micrometre samples, or SLRI’s 5–15 keV range, are useful illustrations only; the beamline assigned to your experiment determines the final specification.
Frequently Asked Questions
Can I use ordinary microscope slides for 3D X‑ray chemical imaging?
Only if the beamline confirms that their composition and geometry are acceptable. Glass can add trace-element background, including Fe, As, Rb, Sr, Zr, and Pb in geological work, so fused silica or quartz may be preferable when those elements matter.
Is cryogenic preparation always better for biological samples?
No. Cryogenic handling can limit chemical movement, but ice and cryo-containers absorb X‑rays and add scatter. The best state depends on the analyte, required resolution, scan duration, and the facility’s available environment.
How can I tell whether my sample is too dense for tomography?
Ask the beamline to estimate transmission and fluorescence escape using the sample’s composition, dimensions, and planned energy. Density alone is not enough: path length changes during rotation, and heavy inclusions can dominate absorption.
Should I make a cylindrical sample for every tomography experiment?
No. Some facilities request cylindrical specimens because their stage and reconstruction geometry are designed for them, while others accept different shapes. Use a cylinder only when the selected beamline recommends it and the trimming does not destroy essential structure.
What records are most valuable after preparation?
Keep the complete treatment timeline, solution compositions, temperatures, storage conditions, final dimensions, mount materials, orientation photographs, and any visible change before scanning. These records help distinguish a preparation-induced redistribution from a real chemical pattern.

