What’s actually slowing this PC down?
Pick the symptom - the matching free tool is one click away.
Some links on this page are affiliate links: if you buy through them we may earn a commission, at no extra cost to you.
PEO-coated magnesium corrodes at scratches and edges because a damaged spot can bypass the coating’s barrier and expose magnesium to water, oxygen, and chloride. Plasma electrolytic oxidation (PEO) creates a ceramic-like oxide, but its outer region remains porous and cracked; the denser inner layer supplies most of the protection. The practical answer is to prevent defects, seal the coating with a process suited to the alloy and environment, and use inhibitor-containing oil only when temporary storage or transport protection is required—not as a scratch-repair coating.
There is no universally validated field repair recipe for every magnesium alloy, PEO formulation, scratch, and service environment. The evidence instead points to better-controlled coating formation, post-treatment sealing, and qualified assessment of any defect that reaches the substrate.
As an Amazon Associate I earn from qualifying purchases.
What happens inside a PEO coating?
PEO applies high-voltage discharges through an electrolyte to grow an oxide layer on magnesium. The result is not a perfectly solid film. A typical structure has a relatively porous outer layer over a denser inner layer that is closer to the magnesium substrate.
A 2024 review reports that the inner layer’s resistance was approximately 8–10 times that of the outer layer in the literature it summarized. That ratio is a literature comparison, not a specification for every commercial coating. The same review describes micropores, discharge channels, and cracks as normal vulnerable points in PEO microstructures.
Popular on Amazon
- 【90 Degree Full Function USB C Adapter】Supports the latest USB4 standard for up to 40Gbps of bandwidth, 8K video support, and up to 240W Fast charging; Support USB PD 3.1 Extended Power Range (EPR) including 140W, 180W and 240W. Your productivity is easily doubled. *Warm Tip: For the best fit, please make sure the USB-C port is fully exposed; thick or bulky cases may affect compatibility.
- 【Reliable Quality】Made from high-quality, scratch-resistant aluminum alloy, delicate metal frame. get excellent wear resistance and heat dissipation. Non-Slip Design for easier insertion and removal.
- 【Small and portable】Ultra thin size, ultra compact design, a petite physique that matches the minimalist design of your modern laptops. Coming with a slim figure that won't block the port next to the one it's plugged into.
- 【Compatibility】Widely work with most usb c, thunderbolt 4/3 devices. Compatibilit for ROG Ally, Steam Deck, Switch, MacBook Pro, Quest 3 VR headset, Surface Book 2, iPhone 18/17/16/15, Samsung Galaxy S23/S22/S21, Note 20/10, Google Pixel, ChromeBook, etc.
- 【Excellence Customer Support】If you experience any issues or cable failure, simply reach out to our dedicated customer service team. We provide a prompt response within 18 hours, providing you with the necessary technical support to resolve any concerns.
When a part is intact, the dense inner region and the oxide barrier slow the movement of electrolyte toward the magnesium. A coating can therefore provide substantially better corrosion resistance than bare magnesium while still containing paths through which a liquid can travel.
The Journal of Magnesium and Alloys comparison of AZ31 and AZ91 found good corrosion resistance for AZ91 coatings near 50 µm average thickness when a sufficiently dense inner layer formed. That value belongs to the alloy, electrical process, and test conditions used in that study; it is not a universal minimum thickness or target for every magnesium component.
For background on how alloy composition and a two-step PEO treatment changed coating formation, see the AZ31/AZ91 coating-formation comparison.
Why do scratches and edges become corrosion hot spots?
A scratch, cut edge, drilled hole, or chipped corner can locally remove the barrier or open a direct route through existing pores. The damaged area is then more exposed than the surrounding surface, so corrosion can start there even when most of the coating remains intact.
- Electrolyte entry: Water containing dissolved salts enters a scratch, edge, pore, or crack. Chloride ions are especially aggressive because they can penetrate defects and destabilize protective oxide.
- Local oxide dissolution: The liquid can dissolve or undermine oxide at the defect. Corrosion products may initially slow further entry, but that temporary effect is not a dependable seal.
- Pitting at the substrate: If the defect reaches magnesium, a local anodic site can form. The surrounding coated surface can act as a comparatively more protected area, concentrating attack at the exposed spot.
- Defect connection: Pits and coating defects can link together. More solution then reaches the substrate, and corrosion can spread under or alongside the coating.
- Loss of adhesion and coating failure: Corrosion products occupy more volume than the original metal and can lift, crack, or delaminate nearby coating.
Edges deserve special attention because coating thickness and discharge conditions can vary around corners and transitions. Mechanical handling can also chip an edge more easily than a broad, flat face. The exact outcome depends on the magnesium alloy, coating process, damage depth, geometry, and exposure; a scratch in dry indoor storage is not equivalent to a breach exposed to salt water.
The 2024 Coatings review summarizes this progression from ingress through defects to dissolution, pitting, and possible penetration to the magnesium substrate. Its concise conclusion is that “Micropores and cracks are identified as vulnerable points for corrosion, and sealing is an effective strategy to address this.”
Quick wins for a faster PC:
Fix the driver behind crashes, sound loss and screen glitchesFind Drivers →Clear out junk files and repair common Windows errorsFree Scan →Also popular on Amazon
- 5-in-1 Connectivity: Equipped with a 4K HDMI port, a 5 Gbps USB-C data port, two 5 Gbps USB-A ports, and a USB C 100W PD-IN port. Note: The USB C 100W PD-IN port supports only charging and does not support data transfer devices such as headphones or speakers.
- Powerful Pass-Through Charging: Supports up to 85W pass-through charging so you can power up your laptop while you use the hub. Note: Pass-through charging requires a charger (not included). Note: To achieve full power for iPad, we recommend using a 45W wall charger.
- Transfer Files in Seconds: Move files to and from your laptop at speeds of up to 5 Gbps via the USB-C and USB-A data ports. Note: The USB C 5Gbps Data port does not support video output.
- HD Display: Connect to the HDMI port to stream or mirror content to an external monitor in resolutions of up to 4K@30Hz. Note: The USB-C ports do not support video output.
- What You Get: Anker 332 USB-C Hub (5-in-1), welcome guide, our worry-free 18-month warranty, and friendly customer service.
How can manufacturers reduce corrosion before a scratch occurs?
The strongest prevention measure is to produce a coating with a dense, well-adhered inner layer and controlled porosity, then select a compatible sealing or post-treatment. PEO performance is process-specific rather than determined by thickness alone.
Control the PEO process
Electrolyte chemistry, voltage and current behavior, pulse settings, treatment time, substrate composition, surface preparation, and part geometry all influence the discharge pattern and resulting pores. The AZ31/AZ91 study reported alloy-specific differences and improved resistance from a two-step treatment that produced better pore sealing and a denser inner layer.
Production specifications should therefore identify the magnesium grade and the actual PEO recipe, not simply state “PEO coated.” Request coating-thickness and porosity information for the relevant area, especially around edges, holes, and complex shapes. A value measured on a flat witness coupon may not represent a sharp corner or recessed feature.
Design away from fragile edges
Where the part can be redesigned, use radiused transitions instead of knife edges, avoid unnecessary sharp corners, and protect impact-prone areas from direct contact. Keep fastener interfaces and clamping surfaces from scraping the coating during assembly. If a coated component must be machined after treatment, treat the machined region as an uncoated or separately protected surface rather than assuming the surrounding PEO will protect it.
Crashes, No Sound, or Screen Glitches?
Random freezes, missing sound and display glitches usually trace back to one bad driver. Find and replace yours safely.Free scan · under a minutePC Slower Than It Used to Be?
A free scan shows the junk files, broken settings and background clutter dragging Windows down - then fixes them in one click.Free scan · Windows 10 & 11Specify the exposure
Tell the coating supplier whether the part will see immersion, salt spray, humid atmospheric storage, cyclic condensation, road salts, or marine transport. A treatment suitable for indoor storage may not withstand chloride immersion. The studies in the literature use different alloys and environments, so their results cannot be ranked as though they were one common service-life test.
Does sealing PEO porosity prevent corrosion?
Sealing can reduce the connected pore volume and block electrolyte pathways, but the sealer must be matched to the alloy, PEO structure, temperature limits, wear requirements, and exposure. It is a prevention or post-treatment measure, not proof that a finished coating will heal a later scratch.
Also popular on Amazon
- Sleek 7-in-1 USB-C Hub: Features an HDMI port, two USB-A 3.0 ports, and a USB-C data port, each providing 5Gbps transfer speeds. It also includes a USB-C PD input port for charging up to 100W and dual SD and TF card slots, all in a compact design.
- Flawless 4K@60Hz Video with HDMI: Delivers exceptional clarity and smoothness with its 4K@60Hz HDMI port, making it ideal for high-definition presentations and entertainment. (Note: Only the HDMI port supports video projection; the USB-C port is for data transfer only.)
- Double Up on Efficiency: The two USB-A 3.0 ports and a USB-C port support a fast 5Gbps data rate, significantly boosting your transfer speeds and improving productivity.
- Fast and Reliable 85W Charging: Offers high-capacity, speedy charging for laptops up to 85W, so you spend less time tethered to an outlet and more time being productive.
- What You Get: Anker USB-C Hub (7-in-1), welcome guide, 18-month warranty, and our friendly customer service.
In an AZ80 study, boiling-water sealing increased corrosion resistance and avoided the crevice corrosion seen in the unsealed sample. The result supports boiling-water sealing for that alloy and study configuration; it does not establish that every magnesium part can be treated safely by simply immersing it in boiling water.
Research on AM50 examined sol-gel and epoxy post-treatments intended to seal PEO porosity and improve corrosion and wear behavior. The available result indicates that a longer dipping treatment was more effective in that work. Cure schedule, film thickness, adhesion, and dimensional changes still need to be controlled for the actual component.
Composite-sealed systems cited in the 2024 review achieved more than 1,000 hours in neutral salt-spray testing in some cases. That is a published result for particular systems, not a general warranty or expected service life for every PEO-coated magnesium product.
For the AZ80 findings, consult the Materials and Corrosion study of PEO-coated AZ80. For AM50 post-treatment methods, see the Journal of Alloys and Compounds study.
Can inhibitor-containing oil protect a scratched PEO coating?
An inhibitor-containing mineral-oil preservation system can provide temporary protection in suitable chloride-related storage or transport conditions, but the evidence does not show that oil repairs a scratch or restores coating integrity.
An AZ31 study evaluated preserved PEO coatings and reported better corrosion protection in its chloride-related evaluations, including temporary protection such as marine transport. This is a preservation result for a defined oil-and-coating system. A random retail oil may lack the required inhibitor, may attack a sealer, may trap contaminants, or may be difficult to remove before assembly or painting.
Also popular on Amazon
- Portable and powerful USB-C HUB: BENFEI USB Type-C HUB, with super-soft and knot-free silicone woven design cable, meets most mobile office needs. Compact, lightweight, stylish, and powerful portable USB C Hub equipped with 1 x HDMI port, 1 x 100W charging, and 3 x USB ports. 18-month warranty, 24-hour response, to ensure you feel at ease when using our product.
- Design centered on comfort and reliability: Thanks to BENFEI's end-to-end in-house cable production capability, in-house PCBA and assembly capability, using the industry's most advanced silicone woven design and process, 20cm cable in length, no knots, super-soft, the HUB is easy to use in all scenarios: laptop, tablet, stand etc. Super-soft, 25000+ life cycles, to meet your daily carrying and office needs.
- 100W Charging: Support up to 90W USB C pass-through charging via Type-C port to keep your laptop powered. 10W is reserved for other interface operations. No data and video function on the Type-C port.
- 4K HDMI Display: The HDMI port supports media display at resolutions up to 4K 30Hz, keeping every incredible moment detailed and ultra vivid. Please note that the C port of the Host device needs to support video output.
- Transfer Files in Seconds: Transfer files and from your laptop at speeds up to 10 Gbps with USB A 3.2 port. Extra 2 USB A 2.0 ports are perfectly for your keyboards and mouse.
Before using any oil, obtain compatibility and cleaning instructions from the coating supplier. Confirm the storage duration, temperature, packaging, and whether the part will later require bonding, painting, electrical contact, or dimensional inspection. Treat the oil as a temporary barrier; if the scratch exposes magnesium, have the damage assessed rather than relying on oil indefinitely.
The preservation results are reported in Corrosion Behaviour of Preserved PEO Coating on AZ31 Magnesium Alloy.
What should you do when a coated part is already scratched?
Because no universal repair procedure has been validated across alloys and service conditions, the safest response is a controlled assessment followed by an alloy- and exposure-specific treatment.
- Clean without enlarging the defect. Remove salt, dirt, and loose corrosion products with a method approved for the coating. Avoid aggressive abrasive pads, steel tools, or solvents that could widen the scratch or attack a sealer.
- Document the damage. Record location, length, width, depth if measurable, nearby edges or fasteners, and the exposure history. Photograph the area before treatment.
- Determine whether magnesium is exposed. A surface mark confined to the sealer or outer oxide has a different risk from a chip that reaches bare substrate. Use the coating supplier’s inspection method; do not infer depth from color alone.
- Check for active corrosion. White or powdery products, darkened pits, under-film lifting, spreading from an edge, or recurring deposits after cleaning indicate that the defect may be active.
- Match the remedy to service. For short-term dry storage, an approved inhibitor-containing oil may be appropriate. For continuing wet or chloride exposure, a qualified provider may recommend localized preparation and a compatible sealing or coating system. The chosen repair must adhere to the existing PEO and tolerate the operating environment.
- Verify before return to service. Inspect the repaired area for adhesion, coverage, dimensional interference, and compatibility with lubricants, paints, electrical contacts, or seals. If the part is safety-critical or corrosion is spreading beneath the coating, replace it or obtain an engineering disposition.
Do not assume that applying paint, cyanoacrylate, grease, or household oil over a scratch is equivalent to a qualified post-treatment. Those materials may hide the defect while allowing electrolyte to remain underneath, and their long-term adhesion to PEO is not established by the cited studies.
Recommended Free Tools
Does PEO self-heal after damage?
No evidence in the supplied literature shows that a finished PEO coating universally repairs a later scratch. A 2018 study reported silica filling of breakdown pores during the PEO growth process itself, which is a process-stage phenomenon. It should not be presented as self-healing after a part has been coated and then damaged.
The study is available as Self-repairing capability of magnesium alloy during the PEO process. Its result may inform future coating design, but it does not replace inspection or post-treatment of an in-service defect.
Also popular on Amazon
- 【Read before You Buy】 Note: This adapter is USB 2.0 version and cannot transmit HDM, VGA, or other video signals. Nevertheless, they are fully capable of charging devices,duplicating files, and can be seamlessly integrated with USB-C earphones, wireless network adapters, and SD card adapters.
- 【Easy to Use and Safe】Thanks to modern manufacturing techniques, we've made these adapters sufficiently compact so that they can remain inserted in your device without noticeable protrusion or inconvenience. This means you don't have to constantly plug and unplug them, reducing the likelihood of wear and misalignment, and making them more convenient to carry around.
- 【Reliable Quality】Engineered for enhanced durability, durable aluminum alloy shell material,get excellent wear resistance and heat dissipation,the male USB C and female USB connectors & the male USB and female USB C connectors are designed to be plugged and unplugged up to 20000 times. Provides data transfer, device charging, memory space expansion, and additional computer peripherals.
- 【Think more for you】Do you need to connect a USB-C-enabled device to an odd device that only has USB-A ports? Then these USB-A male to USB-C female adapters are made for you.Simply insert the adapter into the USB-A port on the device, and you can instantly connect your USB-C device to the device that originally didn't have the correct connection port.
- 【Trusted xiwxi Quality and Service】As a responsible brand seller, you will receive xiwxi's 12-month Quality assurance and lifetime friendly customer service, you're not just buying a product,you're investing in peace of mind with all-round quality and exceptional customer service.
How should coating options be compared?
Compare like with like. A result for AZ31 in a chloride-preservation test cannot establish the expected life of AZ91 in immersion, and a salt-spray figure for a composite sealer cannot be transferred directly to an unsealed coating.
| Decision factor | Questions to ask | Why it matters |
|---|---|---|
| Alloy and substrate | Is the part AZ31, AZ80, AZ91, AM50, or another grade? | Alloy composition changes PEO growth, porosity, adhesion, and corrosion behavior. |
| PEO structure | How dense is the inner layer, and where are pores concentrated? | The inner layer supplies much of the barrier resistance; outer-layer porosity can connect to defects. |
| Damage condition | Is the mark superficial, a coating breach, or exposed magnesium? | Risk rises sharply when electrolyte can contact the substrate. |
| Exposure | Will the part see immersion, salt spray, humidity, condensation, or transport? | Chloride and repeated wetting can accelerate ingress and pitting. |
| Post-treatment | Is there boiling-water, sol-gel, epoxy, composite, or another compatible seal? | Sealing can block connected pores, but compatibility and durability are system-specific. |
| Duration | Is protection needed for hours of transport, months of storage, or continuous service? | Temporary oil preservation is not a substitute for a durable repair or redesign. |
What are the common mistakes?
- Treating thickness as the whole answer: The published 50 µm AZ91 result depended on inner-layer density and the study’s process, not thickness alone.
- Using salt-spray hours as a guarantee: The review’s “over 1,000 hours” examples apply to certain composite-sealed coatings, not all PEO parts or real-world service.
- Ignoring the edge: Corners, holes, and machined interfaces may have different coating coverage and higher handling damage.
- Applying an unverified household product: Oil, grease, paint, or adhesive can be chemically incompatible or conceal active corrosion.
- Comparing unlike studies: Alloy, electrolyte, electrical parameters, coating thickness, sealing, temperature, and test environment all change the result.
- Assuming self-healing: Pore filling during PEO growth does not prove repair after service damage.
- Repairing without finding the cause: Repeated impact, galvanic contact, crevice geometry, or salt contamination can make a localized patch fail again.
What is the practical prevention plan?
For a new component, specify the alloy and service exposure first, then require a PEO process that produces a dense inner layer and a compatible sealer. Protect edges during handling and assembly, and inspect scratches before the part enters a wet or chloride environment.
For an existing component, clean and document the defect, establish whether magnesium is exposed, and obtain a repair recommendation tied to that alloy and environment. Use inhibitor-containing oil only for the temporary preservation case it was designed to address. If corrosion is spreading, the coating is lifting, or the component is safety-critical, stop relying on a cosmetic patch and obtain an engineering disposition.
PEO remains useful because it can substantially improve magnesium’s corrosion resistance, but it is a layered, defect-sensitive system rather than an impermeable shell. Prevention and sealing are supported by the literature; a universal scratch-edge repair formula is not.
Frequently Asked Questions
Can a PEO scratch be polished out safely?
Polishing can remove more of the oxide and make substrate exposure worse, especially at an edge. Use only a procedure qualified for the specific coating and alloy; otherwise, document the defect and have its depth and repairability assessed.
Will clear paint stop corrosion on exposed magnesium?
A generic clear coat is not validated by the cited studies as a compatible PEO repair. It may fail to bond, trap moisture, or interfere with later processing, so any organic topcoat should be selected and qualified as part of a complete post-treatment system.
Free tools Windows power users keep installed
One-click scans. No signup required.
Does a thicker PEO coating always last longer?
No. The AZ31/AZ91 evidence links performance to inner-layer density and pore sealing as well as thickness. A thicker but highly porous outer layer can still provide easy electrolyte paths.
Is marine transport safe with an unsealed PEO coating?
Marine exposure is a chloride-rich condition in which defects can become active. The AZ31 preservation study supports an inhibitor-containing oil system for temporary protection, but it does not establish safe transport for every alloy or unsealed coating without that defined preservation system.

