Thanksgiving DealsAmazon USThanksgiving week: Black Friday picks start earlyAmazon US: current deals, useful picks and tech finds.Check DealsPC HealthRecommendedCrashes, freezes, slowdowns? Check your PC nowSpot repairable issues before they interrupt work.Check PCThanksgiving DealsAmazon USDo not wait for the rush - compare today's dealsAmazon US: current deals, useful picks and tech finds.See Picks×
FREEDOM251

Freedom251 › Blog

Optical vs Condensation Particle Counters in Solvents: Which Detects Nanoparticles?

By Freedom251 Team · · 10 min read

Special offer. See more information about Outbyte and uninstall instructions. Please review EULA and Privacy policy.

Some links on this page are affiliate links: if you buy through them we may earn a commission, at no extra cost to you.

For nanoparticles suspended in a solvent, a liquid-borne optical particle counter (OPC) is the directly relevant counter category. It measures particles flowing in a liquid by light scattering and can report concentration and size-distribution information. A condensation particle counter (CPC), by contrast, is described in the cited guidance as an airborne instrument: it enlarges aerosol particles by condensation before counting them. It should not be treated as a direct detector for nanoparticles that remain suspended in a liquid. If your solvent is nebulized into an aerosol, a CPC may help characterize that generated air sample, but the conversion from suspension to aerosol requires its own validation.

The right choice therefore depends first on the sample matrix, then on target size, concentration, sample preparation, and what evidence you need from the result.

As an Amazon Associate I earn from qualifying purchases.

Special offer. See more information about Outbyte and uninstall instructions. Please review EULA and Privacy policy.

At a glance

Name Best for Key spec Checked
Liquid-borne optical particle counter Direct counting and size-distribution measurements in solvent suspensions, subject to compatibility validation Light-scattering channels; IEST reports a typical 0.05–20 µm diameter range November 2026
Condensation particle counter Screening and counting nanoparticles in an airborne aerosol Condensation enlargement followed by counting; AIHA reports 10 nm–1 µm for airborne particles November 2026

What is the first question to answer: liquid suspension or airborne aerosol?

Identify where the particles are at the instant of measurement. A stable dispersion in a solvent is a liquid sample; particles released from that liquid by spraying, atomizing, or evaporation are an aerosol. The instruments in the cited sources are not interchangeable across those matrices.

CEN ISO/TS 24672:2024 addresses methods for nanoparticle number concentration in both liquid dispersions and aerosols. It surveys ensemble methods and particle-counting techniques and highlights sample preparation, advantages, and limitations. That scope is useful because it prevents a common category error: selecting an air instrument solely because its published lower size limit looks suitable for nanoparticles.

Popular on Amazon
Sale
Silkland 40Gbps USB C 90 Degree Right Angle Adapter 2 Pack, 240W USB4 | Male to Female Extender, 8K@60Hz, Thunderbolt 4/3, Steam Deck, ROG Ally, MacBook, Switch 2, iPhone 18/17/16/15, Quest 3 VR
  • 【90 Degree Full Function USB C Adapter】Supports the latest USB4 standard for up to 40Gbps of bandwidth, 8K video support, and up to 240W Fast charging; Support USB PD 3.1 Extended Power Range (EPR) including 140W, 180W and 240W. Your productivity is easily doubled. *Warm Tip: For the best fit, please make sure the USB-C port is fully exposed; thick or bulky cases may affect compatibility.
  • 【Reliable Quality】Made from high-quality, scratch-resistant aluminum alloy, delicate metal frame. get excellent wear resistance and heat dissipation. Non-Slip Design for easier insertion and removal.
  • 【Small and portable】Ultra thin size, ultra compact design, a petite physique that matches the minimalist design of your modern laptops. Coming with a slim figure that won't block the port next to the one it's plugged into.
  • 【Compatibility】Widely work with most usb c, thunderbolt 4/3 devices. Compatibilit for ROG Ally, Steam Deck, Switch, MacBook Pro, Quest 3 VR headset, Surface Book 2, iPhone 18/17/16/15, Samsung Galaxy S23/S22/S21, Note 20/10, Google Pixel, ChromeBook, etc.
  • 【Excellence Customer Support】If you experience any issues or cable failure, simply reach out to our dedicated customer service team. We provide a prompt response within 18 hours, providing you with the necessary technical support to resolve any concerns.

For a solvent suspension, the measurement path should keep the sample in the liquid phase unless you have a separately validated reason to generate an aerosol. An air CPC reading after nebulization is a measurement of the generated aerosol, not automatically a measurement of the original liquid population. Droplet formation, drying, losses to tubing, agglomeration, and selective transport can all change what reaches the counter; the supplied sources do not establish a universal conversion procedure.

How does a liquid-borne optical particle counter work?

A liquid-borne OPC draws the dispersion through an illuminated sensing zone. Each particle scatters light; the instrument assigns pulses to size channels and counts events to estimate particle concentration and a size distribution. The IEST-RP-CC042 practice covers liquid-borne optical discrete-particle counters using this light-scattering approach.

Free tools Windows power users keep installed

One-click scans. No signup required.

Special offer. See more information about Outbyte and uninstall instructions. Please review EULA and Privacy policy.

IEST describes typical use for relatively low particle concentrations and particle diameters from 0.05 µm to 20 µm. That is a practice-level range, not a guarantee for every solvent, optical configuration, or nanoparticle type. A particle near the lower end may produce a weak signal, while a particle’s refractive index, shape, and surface properties affect scattering. Check the instrument’s calibration basis and application limits for the specific solvent and material.

Optical channels are thresholds in scattering response, not a direct chemical identification. IEST quotes working-group chair Huaping Wang explaining that “all channels are calibrated in the same way, at the median of their corresponding PSL calibration standards.” Polystyrene latex (PSL) calibration gives a consistent optical reference, but a nanoparticle with a different refractive index can scatter differently from a PSL particle of the same physical diameter. Treat the reported size as an instrument-defined equivalent unless the method documentation establishes a more specific relationship.

How does a condensation particle counter work?

A CPC first exposes an airborne particle stream to a condensable vapor. The vapor condenses onto particles, enlarging them so an optical detector can count the resulting droplets. In the AIHA 2023 nanoparticle sampling fact sheet, CPCs are described for airborne particles with a reported detection range of 10 nm to 1 µm.

Also popular on Amazon
Sale
Anker USB C Hub, 5-in-1 USBC to HDMI Splitter with 4K Display | 85W Max PD, 1 Powered USB-C 5Gbps & 2 Powered USB-A 3.0 5Gbps Data Ports, for MacBook Pro, MacBook Air, Dell and More (Black)
  • 5-in-1 Connectivity: Equipped with a 4K HDMI port, a 5 Gbps USB-C data port, two 5 Gbps USB-A ports, and a USB C 100W PD-IN port. Note: The USB C 100W PD-IN port supports only charging and does not support data transfer devices such as headphones or speakers.
  • Powerful Pass-Through Charging: Supports up to 85W pass-through charging so you can power up your laptop while you use the hub. Note: Pass-through charging requires a charger (not included). Note: To achieve full power for iPad, we recommend using a 45W wall charger.
  • Transfer Files in Seconds: Move files to and from your laptop at speeds of up to 5 Gbps via the USB-C and USB-A data ports. Note: The USB C 5Gbps Data port does not support video output.
  • HD Display: Connect to the HDMI port to stream or mirror content to an external monitor in resolutions of up to 4K@30Hz. Note: The USB-C ports do not support video output.
  • What You Get: Anker 332 USB-C Hub (5-in-1), welcome guide, our worry-free 18-month warranty, and friendly customer service.

That range is an air-monitoring specification. It does not mean a CPC can accept a solvent suspension through its inlet, nor that a liquid particle will behave like an airborne nucleus in the CPC’s working fluid. A CPC may be appropriate after a solvent sample has been intentionally converted into an aerosol, but the aerosol-generation and transport method become part of the measurement and must be validated separately.

Special offer. See more information about Outbyte and uninstall instructions. Please review EULA and Privacy policy.

CPC output is primarily a particle count (often total concentration above the counter’s activation threshold). The cited AIHA material does not present a CPC as a direct size-distribution instrument for liquid solvent samples. If you need size-resolved information in the original liquid, a liquid OPC or another liquid-phase technique is the more direct starting point.

What do the published size ranges actually mean?

The numbers are easy to misread because they describe different matrices and measurement mechanisms.

Instrument description Published range Matrix in the cited source How to use the figure
Liquid-borne optical counter 0.05–20 µm Liquid-borne particles Typical IEST range; verify solvent and model-specific performance
Condensation particle counter 10 nm–1 µm Airborne particles AIHA air-monitoring range; do not transfer it to a liquid suspension
Airborne optical particle counter 300 nm–20 µm Airborne particles AIHA range; above the defined nanoparticle range, but potentially useful for larger agglomerates

AIHA notes that airborne OPC coverage begins above the defined nanoparticle range, although an airborne OPC can still be useful when nanoparticles occur as larger agglomerates. This is a different use case from measuring dispersed nanoparticles in a solvent. A counter can report the agglomerated entity that passes through its sensing zone rather than the primary particles that comprise it.

What is the practical difference between an OPC and a CPC for solvent work?

Decision axis Liquid-borne OPC CPC
Supported matrix in the cited sources Liquid-borne particles; designed for optical discrete-particle counting in liquid Airborne particles in the AIHA fact sheet
Detection principle Light scattering; channel thresholds are related to scattering intensity Condensation-based enlargement followed by particle counting
Size information Concentration and size-distribution information; IEST reports a typical 0.05–20 µm range Airborne count over a reported 10 nm–1 µm range; not a direct liquid size distribution
Main solvent issue Wetted-material compatibility, optical properties, bubbles, dilution, and sample handling require validation Liquid compatibility is not established by an airborne specification; aerosol generation would add another method step
Interpretation limit Scattering is not chemical identification; agglomerates and optical properties affect apparent size Counts are also nonspecific; the result does not identify composition or morphology

There is no head-to-head accuracy statistic in the supplied sources for OPCs versus CPCs in solvent suspensions. A lower nominal size limit on an air CPC cannot be used as evidence that it is more accurate for a liquid sample. Compare methods only after matching the matrix and the measurement question.

Special offer. See more information about Outbyte and uninstall instructions. Please review EULA and Privacy policy.
Also popular on Amazon
Sale
Anker USB C Hub, 7in1 Multi-Port USB Adapter, 4K@60Hz USBC to HDMI Splitter | 85W Max PD, 2 USB 3.0 & 1 USBC Data Ports, SD/TF Card Reader, for Laptops/Mac and Other Type C Devices (Charger Not Included)
  • Sleek 7-in-1 USB-C Hub: Features an HDMI port, two USB-A 3.0 ports, and a USB-C data port, each providing 5Gbps transfer speeds. It also includes a USB-C PD input port for charging up to 100W and dual SD and TF card slots, all in a compact design.
  • Flawless 4K@60Hz Video with HDMI: Delivers exceptional clarity and smoothness with its 4K@60Hz HDMI port, making it ideal for high-definition presentations and entertainment. (Note: Only the HDMI port supports video projection; the USB-C port is for data transfer only.)
  • Double Up on Efficiency: The two USB-A 3.0 ports and a USB-C port support a fast 5Gbps data rate, significantly boosting your transfer speeds and improving productivity.
  • Fast and Reliable 85W Charging: Offers high-capacity, speedy charging for laptops up to 85W, so you spend less time tethered to an outlet and more time being productive.
  • What You Get: Anker USB-C Hub (7-in-1), welcome guide, 18-month warranty, and our friendly customer service.

How should you choose a counter for a solvent suspension?

  1. Define the measurand. Decide whether you need total particle number, concentration by size bin, a trend during processing, or evidence about primary-particle size. “Nanoparticle concentration” can mean number per volume, mass concentration, or a distribution, and each requires a different measurement design.
  2. Confirm the phase. If particles remain dispersed in the solvent, start with a liquid-borne method. If the real question concerns worker exposure to an aerosol above the liquid, define an air-sampling plan and consider an airborne CPC or OPC for that exposure scenario.
  3. Set the target range and concentration. Compare the expected particle sizes and concentration with the instrument’s validated range, not just a headline specification. The IEST 0.05–20 µm figure is typical guidance for liquid optical counters; the AIHA 10 nm–1 µm CPC figure applies to air.
  4. Check solvent and materials compatibility. Confirm that the sample path, seals, tubing, windows, and waste handling are compatible with the solvent. Ask for written compatibility information for the exact solvent concentration and temperature. Swelling, extraction, corrosion, or optical fouling can invalidate a count even when the nominal size range is suitable.
  5. Specify preparation controls. Document mixing, sonication, dilution, filtration of blanks, equilibration time, and the order in which samples are run. Preparation can break agglomerates or create them, so it is part of the method rather than a clerical detail.
  6. Plan calibration and blanks. Establish a solvent blank, a cleaning check, and a calibration or verification routine appropriate to the instrument. Optical sizing is commonly tied to reference particles such as PSL; verify how that calibration maps to the material of interest.
  7. Decide what will confirm identity. If the decision depends on composition, morphology, or distinguishing primary particles from agglomerates, specify a complementary technique before collecting data. A counter alone cannot make that identification.

What sample-preparation risks matter most?

Dilution can change the dispersion. Lowering concentration may reduce coincidence errors, but the diluent can alter ionic strength, surface chemistry, or solvent quality and trigger aggregation. Record the dilution factor and verify that the diluted sample still represents the process sample.

Bubbles can look like particles or interrupt flow. Degassing, controlled filling, and a stable flow path may be necessary, but the correct procedure is instrument-specific. Do not improvise a degassing step that changes volatile-solvent composition without documenting it.

Filters can remove the target. A filter used to protect an instrument can also remove nanoparticles or agglomerates. If filtration is unavoidable, characterize the recovery and report the filter specification and preconditioning.

Settling and wall losses create time-dependent results. A suspension that is not stable during the run can produce a concentration that depends on sampling location and elapsed time. Define mixing and sampling timing, and use replicate aliquots when the dispersion is heterogeneous.

Special offer. See more information about Outbyte and uninstall instructions. Please review EULA and Privacy policy.

Converting liquid to aerosol is not neutral. Nebulizing or atomizing may preferentially transport certain sizes, leave residue in the generator, or alter agglomeration as droplets dry. The supplied guidance does not validate a universal conversion from a solvent count to an airborne CPC count, so treat any such workflow as a separate method-development project.

Also popular on Amazon
Sale
BENFEI USB C Hub 5-in-1 with 4K HDMI(Certified), 100W Power Delivery, 3 USB-A, Silicone Cable, Aluminum Case Compatible with MacBook Pro/Air, iPad Pro, iMac, iPhone 15 Pro/Pro Max, XPS, Thinkpad
  • Portable and powerful USB-C HUB: BENFEI USB Type-C HUB, with super-soft and knot-free silicone woven design cable, meets most mobile office needs. Compact, lightweight, stylish, and powerful portable USB C Hub equipped with 1 x HDMI port, 1 x 100W charging, and 3 x USB ports. 18-month warranty, 24-hour response, to ensure you feel at ease when using our product.
  • Design centered on comfort and reliability: Thanks to BENFEI's end-to-end in-house cable production capability, in-house PCBA and assembly capability, using the industry's most advanced silicone woven design and process, 20cm cable in length, no knots, super-soft, the HUB is easy to use in all scenarios: laptop, tablet, stand etc. Super-soft, 25000+ life cycles, to meet your daily carrying and office needs.
  • 100W Charging: Support up to 90W USB C pass-through charging via Type-C port to keep your laptop powered. 10W is reserved for other interface operations. No data and video function on the Type-C port.
  • 4K HDMI Display: The HDMI port supports media display at resolutions up to 4K 30Hz, keeping every incredible moment detailed and ultra vivid. Please note that the C port of the Host device needs to support video output.
  • Transfer Files in Seconds: Transfer files and from your laptop at speeds up to 10 Gbps with USB A 3.2 port. Extra 2 USB A 2.0 ports are perfectly for your keyboards and mouse.

Can a counter tell primary nanoparticles from agglomerates?

No. AIHA states that particle counters cannot distinguish single particles from agglomerates. An agglomerate can therefore be counted as one larger particle, while a fragile cluster may break apart during dilution, pumping, or aerosol generation and appear as several smaller particles.

This limitation matters when a specification is written in terms of primary-particle diameter. A liquid OPC may provide a useful process-control distribution for the entities actually flowing through the detector, but that distribution is not automatically a microscopy-equivalent measurement of primary particles. If morphology or composition is decisive, pair counting with microscopy or another complementary analytical method.

When is an airborne OPC relevant?

An airborne OPC is relevant when the question is about particles already in air, such as an aerosol released during handling or a dried spray. AIHA reports a 300 nm–20 µm airborne OPC range and notes that it is above the defined nanoparticle range. It may nevertheless help detect larger agglomerates that contain nanoparticles.

What’s actually slowing this PC down?

Pick the symptom - the matching free tool is one click away.

Special offer. See more information about Outbyte and uninstall instructions. Please review EULA and Privacy policy.

It is not a substitute for a liquid-borne OPC merely because both instruments use optical scattering. The inlet, flow regime, calibration aerosol, and matrix are different. Keep the air result labelled as airborne concentration and avoid back-calculating a liquid concentration unless the entire generation and transport chain has been characterized.

Independent reader supportYour contribution helps us test, update, and keep practical guides available for everyone.Support on Ko-Fi

What broader methods does ISO guidance put alongside counters?

CEN ISO/TS 24672:2024 surveys more than one route to nanoparticle number concentration. Depending on the measurand and matrix, the broader method context includes particle tracking analysis, resistive pulse sensing, single-particle inductively coupled plasma mass spectrometry (spICP-MS), CPC, and differential mobility analysis systems (DMAS), in addition to particle-counting approaches.

Also popular on Amazon
𝟒𝐏𝐚𝐜𝐤 𝐔𝐩𝐠𝐫𝐚𝐝𝐞𝐝 USB to USB C Adapter,Type-C Female to A Male Charger Converter for iPhone 18 Charger,iWatch Ultra SE 9 10,iPhone 17 Pro Max 16 15 14,Samsung S25,AirPods,iPad,Car,Xbox
  • 【Read before You Buy】 Note: This adapter is USB 2.0 version and cannot transmit HDM, VGA, or other video signals. Nevertheless, they are fully capable of charging devices,duplicating files, and can be seamlessly integrated with USB-C earphones, wireless network adapters, and SD card adapters.
  • 【Easy to Use and Safe】Thanks to modern manufacturing techniques, we've made these adapters sufficiently compact so that they can remain inserted in your device without noticeable protrusion or inconvenience. This means you don't have to constantly plug and unplug them, reducing the likelihood of wear and misalignment, and making them more convenient to carry around.
  • 【Reliable Quality】Engineered for enhanced durability, durable aluminum alloy shell material,get excellent wear resistance and heat dissipation,the male USB C and female USB connectors & the male USB and female USB C connectors are designed to be plugged and unplugged up to 20000 times. Provides data transfer, device charging, memory space expansion, and additional computer peripherals.
  • 【Think more for you】Do you need to connect a USB-C-enabled device to an odd device that only has USB-A ports? Then these USB-A male to USB-C female adapters are made for you.Simply insert the adapter into the USB-A port on the device, and you can instantly connect your USB-C device to the device that originally didn't have the correct connection port.
  • 【Trusted xiwxi Quality and Service】As a responsible brand seller, you will receive xiwxi's 12-month Quality assurance and lifetime friendly customer service, you're not just buying a product,you're investing in peace of mind with all-round quality and exceptional customer service.

That list does not make every method interchangeable. Particle tracking and resistive-pulse methods can answer different size, concentration, or material questions; spICP-MS adds elemental information when the analyte and digestion or dispersion workflow are suitable; DMAS and CPC are generally associated with aerosol measurements. Use the ISO framework to state the measurement objective and constraints first, then select the method whose matrix and signal match that objective.

What validation records should a laboratory keep?

  • Solvent identity, composition, water content where relevant, temperature, and the lot or preparation record.
  • Nanoparticle material, expected primary size, concentration range, and whether agglomerates are expected.
  • Instrument model, detector configuration, calibration reference, flow rate, and software size-channel settings.
  • Wetted-material compatibility confirmation and any manufacturer restrictions on volatile, corrosive, or high-viscosity solvents.
  • Sample preparation sequence, dilution ratios, mixing or sonication energy and duration, filtration, and hold time.
  • Blank counts, carryover checks, replicate results, and acceptance criteria established before routine measurements.
  • Any aerosol-generation equipment and the evidence used to relate an aerosol result to the original liquid, if such a conversion is attempted.

These records make it possible to distinguish an instrument problem from a dispersion change. They also prevent an airborne CPC specification from being silently reused as a liquid-sample claim.

Special offer. See more information about Outbyte and uninstall instructions. Please review EULA and Privacy policy.

How we picked the comparison categories

The comparison follows the factors identified in the supplied ISO and IEST guidance: sample matrix, target size and concentration, sample preparation, size-distribution needs, and measurement limitations. The ranges are quoted only in the matrix for which the source reports them, and no model-level solvent recommendation is made because the sources do not establish compatibility for particular instruments or solvents.

Frequently Asked Questions

Can a condensation particle counter measure particles directly in a liquid?

Not on the basis of the cited CPC guidance. That guidance describes airborne particles; feeding a solvent suspension into an air CPC would require a validated interface and could damage the instrument or change the sample. A liquid-borne counter is the appropriate first category for particles that remain suspended.

Does drying a solvent aerosol preserve the original nanoparticle concentration?

It cannot be assumed. Droplet drying, residue formation, wall losses, and agglomeration can alter both number and size, so an aerosol count is not automatically convertible to the original liquid concentration. Any conversion needs an experimentally supported mass-balance and recovery procedure.

Why can an optical counter report particles larger than the nanoparticle specification?

The detector counts the optical entities that pass its sensing zone, including agglomerates. Changes in refractive index, shape, and calibration material can also shift the reported equivalent size. Confirm whether the requirement concerns primary particles or agglomerated particles before interpreting the distribution.

Special offer. See more information about Outbyte and uninstall instructions. Please review EULA and Privacy policy.

What should I use when nanoparticles are smaller than a liquid OPC’s validated range?

Consider the alternatives surveyed by CEN ISO/TS 24672:2024, such as particle tracking analysis, resistive pulse sensing, or spICP-MS, selected for the material and concentration. A CPC’s 10 nm air range does not solve a below-range liquid measurement unless a separate, validated aerosol workflow exists.

Is a CPC more sensitive than an OPC for every nanoparticle measurement?

No general comparison follows from the published ranges. The CPC range is for airborne particles, while the IEST optical-counter range is for liquid-borne particles; matrix, calibration, concentration, and preparation determine practical performance. Compare validated methods for the same sample phase and measurand.

Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon at the time of purchase will apply. Prices as of November 22, 2026 5:05 pm GMT+0530.

Leave a Reply

Your email address will not be published. Required fields are marked *

Special offer. See more information about Outbyte and uninstall instructions. Please review EULA and Privacy policy.

Recommended PC Tool
Recommended PC Tool
Crashes, No Sound, or Screen Glitches?Free driver scan
Windows Errors? Fix Them Before They SpreadFree repair scan

Two free Windows tools

One Free Minute Could Fix That PC

Before you go - each of these free tools takes about a minute and tackles what quietly slows a Windows PC down.

Special offer. View Outbyte info, uninstall instructions, EULA, and Privacy Policy.