Quick wins for a faster PC:
Scan for outdated or missing drivers - takes under a minuteDriver Scan →Repair Windows errors before they cause bigger problemsFix Now →Fix the driver behind crashes, sound loss and screen glitchesFind Drivers →Some links on this page are affiliate links: if you buy through them we may earn a commission, at no extra cost to you.
Negative triangularity (NT) is a reversed-D plasma shape, while positive triangularity (PT) is the conventional outboard-pointing D used by most tokamak designs. NT is not simply “better”: experiments show H-mode-level global confinement without an edge pedestal or ELMs, but also narrower heat-flux widths, higher detachment densities and tougher vertical-control requirements. PT offers a more established stability and divertor baseline, yet its H-mode pedestal brings ELMs and an L–H power threshold. The practical choice is therefore a three-way trade-off among core performance, heat exhaust and engineering robustness.
| Name | Best for | Key spec | Platforms | Checked |
|---|---|---|---|---|
| Negative triangularity (NT) | ELM-free, high-confinement operation with flexible core radiation | δ < 0; DIII-D reached H98y,2 ≈ 1.2 and βN = 2.7 in limited plasmas | TCV, DIII-D, ASDEX Upgrade, MAST-U, JET | November 2026 |
| Positive triangularity (PT) | Established H-mode performance and more mature vertical-stability experience | δ > 0; conventional H-mode pedestal, usually with ELM-control requirements | ITER-design baseline; TCV, DIII-D and other tokamaks | November 2026 |
What is the difference between negative and positive triangularity?
Triangularity describes how far the upper and lower parts of a tokamak plasma sit inboard or outboard of its geometric centre. Using the usual definition, upper and lower triangularities are δu/l = (Rgeo − RZmax/Zmin)/a, and the average is δ = (δu + δl)/2. A vertically symmetric PT plasma points toward the outboard side and has positive δ; a reversed-D NT plasma points inward and has negative δ. A representative comparison in the 2026 review uses δ = +0.4 and δ = −0.4.
As an Amazon Associate I earn from qualifying purchases.
PT is the shape assumed by most fusion pilot-plant concepts, including ITER-like designs. NT was explored in the 1970s and 1980s, then set aside as conventional MHD calculations and coil-stress arguments favoured the D shape. Shape-flexibility experiments on TCV and high-power studies on DIII-D revived it as a serious reactor option. The latest multi-machine review covers TCV, DIII-D, ASDEX Upgrade, MAST-U and JET (Thome et al., 2026).
The distinction matters because triangularity changes edge stability, turbulent transport, the location of the X-point and the geometry through which exhaust reaches the divertor. “Negative triangularity tokamak versus H-mode” is therefore not a simple L-mode-versus-H-mode comparison. Strong NT generally remains in L-mode at the edge, but its core and global confinement can approach H-mode values.
Popular on Amazon
- 【90 Degree Full Function USB C Adapter】Supports the latest USB4 standard for up to 40Gbps of bandwidth, 8K video support, and up to 240W Fast charging; Support USB PD 3.1 Extended Power Range (EPR) including 140W, 180W and 240W. Your productivity is easily doubled. *Warm Tip: For the best fit, please make sure the USB-C port is fully exposed; thick or bulky cases may affect compatibility.
- 【Reliable Quality】Made from high-quality, scratch-resistant aluminum alloy, delicate metal frame. get excellent wear resistance and heat dissipation. Non-Slip Design for easier insertion and removal.
- 【Small and portable】Ultra thin size, ultra compact design, a petite physique that matches the minimalist design of your modern laptops. Coming with a slim figure that won't block the port next to the one it's plugged into.
- 【Compatibility】Widely work with most usb c, thunderbolt 4/3 devices. Compatibilit for ROG Ally, Steam Deck, Switch, MacBook Pro, Quest 3 VR headset, Surface Book 2, iPhone 18/17/16/15, Samsung Galaxy S23/S22/S21, Note 20/10, Google Pixel, ChromeBook, etc.
- 【Excellence Customer Support】If you experience any issues or cable failure, simply reach out to our dedicated customer service team. We provide a prompt response within 18 hours, providing you with the necessary technical support to resolve any concerns.
Does negative triangularity really match H-mode confinement?
In several experiments, yes: strong NT has reached H-mode-level global confinement without forming the H-mode pedestal. The result is reproducible across machines, but its extrapolation to reactor conditions—especially metal walls, radio-frequency heating and reactor-scale dimensionless parameters—remains uncertain.
DIII-D limited-plasma benchmark
In DIII-D limited-wall discharges at δ = −0.4, NT reached normalized beta βN = 2.7 and H98y,2 = 1.2 for almost two seconds. There was no edge pressure pedestal and no ELMs. At the same plasma current, elongation and cross-sectional area, the global performance matched a δ = +0.4 ELMing H-mode. These values and the underlying measurements are reported in the DIII-D reactor-performance study.
Matched profiles also showed 10–50% lower turbulent fluctuation levels over 0.5 < ρ < 0.9, depending on whether electron-cyclotron heating (ECH) or neutral-beam injection (NBI) dominated. In a Te > Ti ECH pair, stored energy was 0.20 MJ for NT versus 0.16 MJ for PT, a 25% increase; electron energy-confinement time was 88 ms versus 70 ms, 26% higher. NT stored energy rose approximately linearly as coupled power increased from 2 to 12 MW, without the usual L-mode power degradation.
Diverted NT and broader databases
Later diverted DIII-D experiments sustained H98y,2 around 1 and βN around 3 without a pedestal, even with auxiliary power well above the conventional L–H threshold. Confinement degraded more weakly than the ITER-89P L-mode scaling, so the confinement factor improved as auxiliary power increased (Marinoni et al., 2021).
The 2023 DIII-D campaign covered plasma currents of 0.5–1.2 MA, toroidal fields of 1.0–2.2 T, q95 from 2.4 to 7, up to roughly 15 MW of auxiliary power and pulses lasting about 6.5 seconds. Strong NT generally achieved H98y,2 ≥ 1 and βN > 2.5. TCV also found confinement increasing as triangularity became more negative, with high-performance NT reaching βN = 2.7 in ohmic and heated studies.
Scaling is not settled. A large TCV/DIII-D similarity database finds machine-size behaviour between Bohm and gyro-Bohm expectations and a weak improvement of normalized confinement with collisionality (Marinoni et al., 2026). The 2026 review notes that NT data fit H98y,2 near unity in many heated cases, but also show stronger plasma-current dependence and more power degradation than the H98y,2 exponents would suggest, particularly at high Greenwald fraction. This is compatible with NT looking better than ITER-89P L-mode while remaining less cleanly described by H-mode scaling.
Why does NT transport improve?
Linear gyrokinetic analyses of matched DIII-D pairs find both shapes to be dominated by trapped-electron-mode (TEM) turbulence, with TEM transport reduced in NT. TCV analyses report improved TEM except at tight aspect ratio and improved ion-temperature-gradient (ITG) behaviour across the studied range. The strongest confinement lever is usually the non-X-point, or top, triangularity; the X-point triangularity can be adjusted separately for divertor engineering. Sauter et al. recommend aspect ratio R/a above 2.5 and report roughly a factor-of-two improvement in the outer pedestal-region transport (ρtorN ≈ 0.8–1) compared with PT, while the core is similar to PT L-mode (Sauter et al., 2023).
Also popular on Amazon
- 5-in-1 Connectivity: Equipped with a 4K HDMI port, a 5 Gbps USB-C data port, two 5 Gbps USB-A ports, and a USB C 100W PD-IN port. Note: The USB C 100W PD-IN port supports only charging and does not support data transfer devices such as headphones or speakers.
- Powerful Pass-Through Charging: Supports up to 85W pass-through charging so you can power up your laptop while you use the hub. Note: Pass-through charging requires a charger (not included). Note: To achieve full power for iPad, we recommend using a 45W wall charger.
- Transfer Files in Seconds: Move files to and from your laptop at speeds of up to 5 Gbps via the USB-C and USB-A data ports. Note: The USB C 5Gbps Data port does not support video output.
- HD Display: Connect to the HDMI port to stream or mirror content to an external monitor in resolutions of up to 4K@30Hz. Note: The USB-C ports do not support video output.
- What You Get: Anker 332 USB-C Hub (5-in-1), welcome guide, our worry-free 18-month warranty, and friendly customer service.
Why is negative triangularity ELM-free?
Strong NT blocks access to the second ballooning-stability region, so the edge does not build the high-pressure pedestal that normally reaches the ELM limit in PT H-mode. The plasma can therefore remain L-mode at the edge while retaining H-mode-like global confinement.
In PT, crossing the L–H threshold creates an edge transport barrier. H-mode typically doubles particle and energy confinement relative to L-mode, but the pedestal periodically relaxes through ELMs unless mitigated with pacing, resonant magnetic perturbations or other control systems. In NT, sufficiently negative top or bottom triangularity prevents the transition into that second-stability-region pathway. DIII-D observed no ELMs at triangularities below its critical value even when applied power was up to ten times the predicted L–H threshold. The dedicated campaign maintained ELM-free, high-performance discharges despite deliberate attempts to trigger H-mode; JET likewise did not access H-mode with 32 MW of injected auxiliary power.
There is no universal δcrit for every tokamak. On DIII-D, a top triangularity of about δ ≤ −0.28 produced the predicted H–L back-transition at constant power. Spherical tokamaks differ: MAST-U can enter H-mode in the first ballooning regime, so eliminating second-stability access alone did not remove all small ELMs; stronger NT was needed. It is therefore unsafe to copy the DIII-D threshold directly to another machine.
Recommended Free Tools
The ELM-free mechanism is a major systems advantage. NT does not require ELM-control coils, pellet pacing or a carefully timed L–H trajectory. Its basic operating rule is geometric: remain more negative than the machine’s critical triangularity. That simplicity does not remove all disruption or MHD risks, but it removes a major H-mode control problem.
Is negative triangularity more stable than positive triangularity?
There is no single stability verdict. NT has avoided the old assumption of an automatically low beta limit, yet matched calculations generally find more difficult low-n MHD and poorer vertical stability than PT. Passive plates and profile control can substantially reduce the engineering penalty.
Pressure limits and low-n modes
Early NT arguments placed more plasma volume in unfavourable curvature and predicted low ballooning limits. However, GATO n = 1 kink calculations on scaled DIII-D profiles found βN = 3.1, consistent with the experiment’s sustained βN = 2.7. A 2024 profile-dependent study finds that broad-pressure NT profiles are more vulnerable to low-n MHD than PT. With high bootstrap fraction, high poloidal beta and a sufficiently peaked pressure profile, a particular NT parameter domain reached normalized beta about twice an extended Troyon limit, while the corresponding PT calculation remained Troyon-limited (Zheng, Liu and Kotelnikov, 2024).
For identical density and temperature profiles, that study ranks PT most stable, zero triangularity intermediate and NT least stable to low-n modes. Intermediate-n modes with a resistive wall can behave differently and may be more stable in NT, consistent with reduced turbulent transport. Experimentally, NT operation has shown moderate-β robustness: in a matched half-day comparison, PT averaged βN = 3.16 ± 0.54 and NT averaged 2.79 ± 0.24. NT’s lower mean came with a smaller spread, indicating consistent—but not necessarily higher-limit—operation.
What’s actually slowing this PC down?
Pick the symptom - the matching free tool is one click away.
Also popular on Amazon
- Sleek 7-in-1 USB-C Hub: Features an HDMI port, two USB-A 3.0 ports, and a USB-C data port, each providing 5Gbps transfer speeds. It also includes a USB-C PD input port for charging up to 100W and dual SD and TF card slots, all in a compact design.
- Flawless 4K@60Hz Video with HDMI: Delivers exceptional clarity and smoothness with its 4K@60Hz HDMI port, making it ideal for high-definition presentations and entertainment. (Note: Only the HDMI port supports video projection; the USB-C port is for data transfer only.)
- Double Up on Efficiency: The two USB-A 3.0 ports and a USB-C port support a fast 5Gbps data rate, significantly boosting your transfer speeds and improving productivity.
- Fast and Reliable 85W Charging: Offers high-capacity, speedy charging for laptops up to 85W, so you spend less time tethered to an outlet and more time being productive.
- What You Get: Anker USB-C Hub (7-in-1), welcome guide, 18-month warranty, and our friendly customer service.
Why is vertical control harder?
With a conformal wall, NT equilibria are less vertically stable than equivalent PT equilibria, and the degradation worsens at higher poloidal beta. Low-aspect-ratio improvements that help PT do not automatically transfer to NT. A PT-shaped vacuum vessel can bring the NT plasma closer to the outboard wall, but the reduced gap leaves less recovery margin.
Passive stabilization is a credible remedy. In modelling of a highly elongated NT device, outboard passive plates reduced the vertical growth rate to 16% of the unplated NT baseline—about 15 Hz compared with a 42 Hz PT baseline without plates. NT also permits useful inboard passive plates, separating stabilizers spatially from active coils. These results come from the vertical-stability assessment, not from an operating reactor.
How do negative and positive triangularity compare for divertor heat exhaust?
NT improves some exhaust options but worsens others. Its outboard X-point gives a larger divertor wetted circumference and better maintenance access, while its reduced cross-field transport narrows λq and pushes detachment toward higher density.
Geometry and wetted area
NT places the X-point at larger major radius. The geometric exhaust ring, approximately 2πRdiv, is therefore larger on the outboard side, and remote-maintenance access can be easier. In a reactor, this matters because present machines send 10–20 MW through a 1–10 mm scrape-off layer, while a reactor may send more than 100 MW. Plasma-facing components tolerate only roughly 5–10 MW/m² before melting, so radiation and detachment must dissipate most of the power.
Do these 3 things before closing this tab:
1Repair Windows errors before they cause bigger problems2Fix the driver behind crashes, sound loss and screen glitches3Clear out junk files and repair common Windows errorsMeasurements are nuanced. In diverted DIII-D NT, the reconstructed mid-plane scrape-off-layer heat-flux width exceeded the ITPA multi-machine scaling by up to 50% in one study, a benefit compared with standard H-mode expectations. Yet the broader database finds λq decreasing as triangularity becomes more negative: strong NT is narrower than weak NT and can be narrower than PT L-mode, approaching H-mode Eich scaling. Thus NT can be wider than an H-mode scaling would predict while still being narrower than PT L-mode. The optimum δ must balance core confinement against this narrowing.
Why does NT need higher density to detach?
Detachment has been achieved in NT on both DIII-D and TCV, so NT geometry does not make detachment impossible. Open-divertor experiments generally require higher density than PT. DIII-D typically detached above 90% of the Greenwald fraction; as density approached that range, βN and H98y,2 fell. TCV required nitrogen seeding, while DIII-D could detach with intrinsic carbon and reached lower detachment density when extrinsic impurities were added.
Shorter poloidal and parallel divertor lengths, together with smaller λq, help explain the higher density requirement. A SOLPS-ITER study of matched TCV divertors found PT outer-target electron temperature falling below 5 eV during a density ramp while NT remained above 5 eV (attached), despite identical divertor geometry. Simulations using identical transport coefficients did not reproduce the difference; matching experiment required lower particle diffusivity in NT. The authors conclude that altered cross-field transport, rather than magnetic geometry alone, is the leading explanation (Mombelli et al., 2025).
Also popular on Amazon
- Portable and powerful USB-C HUB: BENFEI USB Type-C HUB, with super-soft and knot-free silicone woven design cable, meets most mobile office needs. Compact, lightweight, stylish, and powerful portable USB C Hub equipped with 1 x HDMI port, 1 x 100W charging, and 3 x USB ports. 18-month warranty, 24-hour response, to ensure you feel at ease when using our product.
- Design centered on comfort and reliability: Thanks to BENFEI's end-to-end in-house cable production capability, in-house PCBA and assembly capability, using the industry's most advanced silicone woven design and process, 20cm cable in length, no knots, super-soft, the HUB is easy to use in all scenarios: laptop, tablet, stand etc. Super-soft, 25000+ life cycles, to meet your daily carrying and office needs.
- 100W Charging: Support up to 90W USB C pass-through charging via Type-C port to keep your laptop powered. 10W is reserved for other interface operations. No data and video function on the Type-C port.
- 4K HDMI Display: The HDMI port supports media display at resolutions up to 4K 30Hz, keeping every incredible moment detailed and ultra vivid. Please note that the C port of the Host device needs to support video output.
- Transfer Files in Seconds: Transfer files and from your laptop at speeds up to 10 Gbps with USB A 3.2 port. Extra 2 USB A 2.0 ports are perfectly for your keyboards and mouse.
The proposed reactor response is a closed, pumped NT divertor that can remove neutrals at lower core density. No closed-pumped NT divertor result has yet established that solution; it remains an engineering and physics test for upgraded facilities.
Can NT run a strong radiative mantle?
Yes, and this is one of NT’s clearest exhaust advantages. Because NT has no L–H floor to remain above, operators can radiate a larger fraction of power in the confined plasma without dropping out of H-mode. In DIII-D, seeding with neon, argon, krypton and nitrogen increased the core radiated fraction from 0.2 to 0.45–0.55 and the total radiated fraction from 0.5 to 0.8, comparable to the best PT scenarios. The experiment was limited by the lack of active pumping in that shape.
Does NT retain fewer impurities?
Available measurements generally favour NT for impurity flushing, although the result depends on wall material and plasma configuration. DIII-D graphite NT commonly measured Zeff near 2, lower than other high-performance ELM-free scenarios. Laser-blowoff experiments found both impurity confinement time relative to electron confinement and Zeff typically lower in NT than PT H-mode. High-Z impurity peaking in the core was similar between the shapes, while TCV observed higher carbon density in limited NT than in comparable PT. These findings support low impurity retention as a potential NT benefit, not as a guarantee for a reactor with metal walls.
How robust is the NT operating space?
NT has several operationally attractive features. TCV and DIII-D have operated robustly at q95 below 3, a region that often produces severe MHD or disruptions in PT H-mode. No major difference in disruptivity has yet been established, so this is evidence of accessible operation rather than proof of superior disruption immunity.
DIII-D sustained non-disruptive Greenwald fractions up to approximately fGW = 2 using only edge gas puffing, while edge density generally remained below the Greenwald density. That combination could help reconcile detachment requirements with core fusion power density. Reactor studies suggest aiming at nel/nG around 1.2–1.5, but the best value depends on confinement, radiation and divertor design.
The Tool Desk
Outbyte Driver Updater FREEScan for outdated or missing drivers - takes under a minuteDriver Scan →Outbyte PC Repair FREEClear out junk files and repair common Windows errorsFree Scan →PT has the advantage of a much larger operating and engineering knowledge base. Its H-mode threshold, pedestal behaviour, vertical control and divertor scalings are embedded in ITER-oriented design work. NT’s reproducibility at moderate βN is encouraging, but confinement with RF heating, rotation, metal walls and reactor-scale ρ* is not yet established.
Independent reader supportYour contribution helps us test, update, and keep practical guides available for everyone.Which shape is better for a fusion pilot plant?
Choose PT when the design prioritizes established H-mode and stability practice and can afford ELM mitigation, a reliable L–H transition and extensive active control. Choose NT when eliminating ELMs, raising allowable core radiation and simplifying edge control are worth accepting narrower heat-flux widths, higher open-divertor detachment density and additional vertical-stability hardware.
Also popular on Amazon
- 【Read before You Buy】 Note: This adapter is USB 2.0 version and cannot transmit HDM, VGA, or other video signals. Nevertheless, they are fully capable of charging devices,duplicating files, and can be seamlessly integrated with USB-C earphones, wireless network adapters, and SD card adapters.
- 【Easy to Use and Safe】Thanks to modern manufacturing techniques, we've made these adapters sufficiently compact so that they can remain inserted in your device without noticeable protrusion or inconvenience. This means you don't have to constantly plug and unplug them, reducing the likelihood of wear and misalignment, and making them more convenient to carry around.
- 【Reliable Quality】Engineered for enhanced durability, durable aluminum alloy shell material,get excellent wear resistance and heat dissipation,the male USB C and female USB connectors & the male USB and female USB C connectors are designed to be plugged and unplugged up to 20000 times. Provides data transfer, device charging, memory space expansion, and additional computer peripherals.
- 【Think more for you】Do you need to connect a USB-C-enabled device to an odd device that only has USB-A ports? Then these USB-A male to USB-C female adapters are made for you.Simply insert the adapter into the USB-A port on the device, and you can instantly connect your USB-C device to the device that originally didn't have the correct connection port.
- 【Trusted xiwxi Quality and Service】As a responsible brand seller, you will receive xiwxi's 12-month Quality assurance and lifetime friendly customer service, you're not just buying a product,you're investing in peace of mind with all-round quality and exceptional customer service.
| Decision axis | Positive triangularity | Strong negative triangularity |
|---|---|---|
| Global confinement | Well characterized H-mode pedestal; H-mode usually about twice L-mode confinement | H98y,2 ≈ 1–1.2 and βN ≈ 2.7–3 demonstrated without a pedestal |
| ELMs and pedestal | Pedestal forms; ELMs require mitigation or pacing | Remains L-mode at the edge and is intrinsically ELM-free when below critical δ |
| L–H threshold | Must be crossed and maintained | No L–H floor; high heating can remain in the NT state |
| Low-n MHD | Generally more favourable for matched profiles | Profile-dependent; broad profiles can be less stable, but peaked high-bootstrap cases can exceed Troyon-like limits |
| Vertical stability | More mature control margin | Usually worse; passive plates and coil placement are important |
| Heat-flux width | PT L-mode can be broader; H-mode scaling is narrower | Gets narrower as |δ| increases, although some pedestal-free cases exceed H-mode scaling |
| Detachment | Lower density in matched open-divertor comparisons | Usually higher density; reduced transport is a leading cause |
| Core radiation | Must stay above the L–H threshold | Large radiative fractions are possible without losing an H-mode pedestal |
| Engineering maturity | Baseline for most pilot-plant studies | Promising but lacks metal-wall and closed-divertor reactor databases |
What are SPARC, MANTA and other NT reactor studies actually showing?
NT is moving from shape experiments toward integrated pilot-plant studies, but most reactor claims remain projections. DIII-D has developed lower-divertor tiles for diverted NT and is planning a closed pumped configuration for core-edge integration and exhaust diagnostics. TCV, ASDEX Upgrade, MAST-U, WEST, KSTAR, SMART and JET continue to contribute physics data; DTT in Italy is investigating NT. SPARC shape assessments and design studies such as MANTA (δ about −0.5) and CENTAUR examine high-field, radiative, ELM-free concepts.
A 0-D power-balance study of SPARC, MANTA, ITER and DEMO found that, for sufficiently high field or fusion gain, ohmically heated NT can outperform externally heated PT H-mode in the simplified model because external-heating power is not needed to cross an L–H floor. Under the assumption that H-mode scaling remains valid for NT, the model reached the same fusion power at a fusion gain Q = 80 for ohmically heated NT. Q = 80 is a modelling result, not an experimental measurement, and requires higher-fidelity transport, stability and exhaust calculations (Balestri, Ball and Coda, 2025).
What must be solved before NT can replace PT?
- Confinement extrapolation: establish scaling with reactor-level power, rotation, RF rather than NBI heating, metal walls and normalized gyroradius.
- Optimal triangularity: find the δ that preserves turbulence reduction without making λq and detachment density unacceptable.
- Closed-divertor integration: demonstrate pumping and detachment at densities that preserve βN and H98y,2.
- Vertical-control architecture: validate passive plates, active coils and recovery margins in a reactor-sized, highly elongated NT vessel.
- Low-n stability and profiles: determine how bootstrap fraction, pressure peaking, q-profile and wall placement jointly set the usable βN.
- Materials and impurities: repeat confinement and impurity-transport studies with metal plasma-facing components and neutron-relevant conditions.
- Operating-space statistics: quantify disruptions, density limits and shot-to-shot reproducibility across long pulses, rather than relying on short experimental campaigns.
Bottom line: is negative triangularity better than positive triangularity?
Negative triangularity is a credible alternative to PT H-mode, not a proven universal replacement. It offers H-mode-level confinement with an intrinsically ELM-free edge, high radiative-mantle headroom and potentially simpler control. PT remains easier to extrapolate for vertical stability, low-n MHD and divertor operation. Until NT demonstrates reactor-relevant confinement with metal walls and a pumped detached divertor, the defensible conclusion is conditional: NT may deliver the better integrated plant if its exhaust and stability penalties can be engineered down.
Frequently Asked Questions
Can a negative-triangularity plasma enter H-mode?
Strong NT is normally prevented from entering the conventional H-mode regime because its edge cannot access the second ballooning-stability region. The exact threshold is machine-dependent; DIII-D data indicate a top triangularity near −0.28 for the observed H–L transition, while spherical tokamaks such as MAST-U can behave differently.
Why does NT detachment require more density?
Experiments point to reduced cross-field particle transport, shorter effective divertor lengths and a narrower heat-flux width. These effects keep the target hotter at a given density, so detachment generally occurs closer to the Greenwald limit than in matched PT cases.
What does βN mean in an NT comparison?
βN is normalized plasma pressure, a dimensionless measure used to compare performance across current and magnetic-field conditions. It is not a direct stability guarantee: the achievable value depends on pressure shape, bootstrap fraction, q-profile, wall position and the specific MHD mode being considered.
PC Slower Than It Used to Be?
A free scan shows the junk files, broken settings and background clutter dragging Windows down - then fixes them in one click.Free scan · Windows 10 & 11Outdated Drivers Are Slowing You Down
One free scan finds every outdated or missing driver and matches the right update for your exact hardware.Free scan · exact hardware matchCould NT work with a metal first wall?
That remains an open research question. Existing NT confinement and impurity results rely heavily on graphite-wall experiments, and the 2026 review identifies the lack of a metal-wall scaling database as a major uncertainty for reactor extrapolation.
Does negative triangularity eliminate all tokamak disruptions?
No. NT can operate reproducibly at low q95 and high Greenwald fraction, but current experiments have not established a universal disruptivity advantage over PT. Low-n MHD and vertical-instability risks still require active monitoring and engineered control.

