Do these 3 things before closing this tab:
1Repair Windows errors before they cause bigger problems2Fix the driver behind crashes, sound loss and screen glitches3Clear out junk files and repair common Windows errorsSome links on this page are affiliate links: if you buy through them we may earn a commission, at no extra cost to you.
Setting up a joystick, rudder pedals, and throttle for Microsoft Flight Simulator 2024 air racing means assigning the stick to roll and pitch, the pedals (or a twist axis) to yaw, and the throttle lever to engine power, then checking every axis in the Controls screen before you race. Start with a detected-device preset, use Customization to correct individual assignments, and tune response in a forgiving flight rather than copying a universal sensitivity value.
This arrangement gives you predictable control for fast turns and slaloms while keeping the most-used inputs within reach. The exact control names can differ by aircraft and hardware, so treat the mappings below as a reliable baseline, not a mandatory profile.
As an Amazon Associate I earn from qualifying purchases.
What do you need before configuring MSFS 2024?
You need the simulator installed on a supported platform, the joystick, pedals, and throttle connected before launching or entering the Controls screen, and a USB connection that the operating system can see. If you are buying hardware for Xbox Series X|S, verify explicit Xbox compatibility first: Microsoft warns that most PC flight peripherals do not work on Xbox unless the manufacturer specifies support, and some compatible units require a PC/Xbox mode switch (Microsoft’s hardware setup guide).
On PC, a separate joystick, throttle, and pedal set gives the most direct access to racing controls, but it is not required. A joystick with an integrated throttle can handle power, while a twist grip can provide rudder. Separate pedals become especially useful when you want dedicated yaw and toe-brake input. Microsoft’s peripheral guide frames the choice around budget, available desk space, desired immersion, and the controls you want to operate simultaneously.
Popular on Amazon
- 【90 Degree Full Function USB C Adapter】Supports the latest USB4 standard for up to 40Gbps of bandwidth, 8K video support, and up to 240W Fast charging; Support USB PD 3.1 Extended Power Range (EPR) including 140W, 180W and 240W. Your productivity is easily doubled. *Warm Tip: For the best fit, please make sure the USB-C port is fully exposed; thick or bulky cases may affect compatibility.
- 【Reliable Quality】Made from high-quality, scratch-resistant aluminum alloy, delicate metal frame. get excellent wear resistance and heat dissipation. Non-Slip Design for easier insertion and removal.
- 【Small and portable】Ultra thin size, ultra compact design, a petite physique that matches the minimalist design of your modern laptops. Coming with a slim figure that won't block the port next to the one it's plugged into.
- 【Compatibility】Widely work with most usb c, thunderbolt 4/3 devices. Compatibilit for ROG Ally, Steam Deck, Switch, MacBook Pro, Quest 3 VR headset, Surface Book 2, iPhone 18/17/16/15, Samsung Galaxy S23/S22/S21, Note 20/10, Google Pixel, ChromeBook, etc.
- 【Excellence Customer Support】If you experience any issues or cable failure, simply reach out to our dedicated customer service team. We provide a prompt response within 18 hours, providing you with the necessary technical support to resolve any concerns.
Hardware decisions that affect the setup
- Separate or integrated throttle: A separate lever is easier to reach precisely during a race, while an integrated slider saves space.
- Twist rudder or pedals: Twist is a practical way to start with one device. Pedals provide a dedicated yaw axis and can add foot-operated braking.
- Desk space and mounting: Keep the stick where your forearm can rest naturally and place the throttle so you can adjust it without releasing the stick.
- Platform: Do not infer Xbox support from PC connectivity alone. Check the manufacturer’s compatibility statement and any required console mode.
Where do you configure a joystick, pedals, and throttle?
Open Microsoft Flight Simulator 2024’s Controls screen. The onboarding interface displays detected devices and can apply a preset when the simulator recognizes them; choose Customization to inspect or change individual bindings, or create a custom setup when a device is not recognized. This workflow is described in Microsoft’s MSFS 2024 controls and accessibility documentation.
- Connect the joystick, rudder pedals, and throttle before opening the control profile.
- Open Controls and identify each device in the device selector.
- Load the detected preset if one appears, then select Customization.
- Search for an action by name and assign the corresponding axis by moving the physical control when the interface asks for input.
- Save the profile with a clear name such as “Air racing – baseline.” Keeping a separate profile protects your general-flight bindings while you experiment.
Labels can vary between devices and aircraft. A control may appear as an X, Y, Z, slider, rotation, or manufacturer-specific axis, so use the movement indicator rather than relying only on the label.
What is the best baseline mapping for air racing?
For a conventional single-engine racing aircraft, use this mapping as your starting point. It follows the function of each control; it is not a claim that every device uses identical axis names.
| Physical control | Simulator action | What it changes | Check |
|---|---|---|---|
| Joystick left/right | Aileron axis | Rolls the aircraft into a bank | Move left and right; the response should travel smoothly across the full range |
| Joystick forward/back | Elevator axis | Raises or lowers the nose (pitch) | Push forward and pull back; confirm the aircraft responds in the expected direction |
| Rudder-pedal movement | Rudder axis | Yaws the nose left or right | Press each pedal and verify that the rudder centers when your feet are neutral |
| Joystick twist, if used | Rudder axis | Provides yaw without separate pedals | Twist both directions and confirm it is not assigned to another action |
| Throttle lever | Throttle axis | Changes engine power or thrust | Move from idle to maximum and watch for a complete, continuous range |
Microsoft notes that throttles control engine power or thrust and that some levers can also control mixture or propeller RPM. Leave those additional axes unassigned until you know the aircraft needs them; an unintended mixture or propeller assignment can make a racing profile harder to diagnose.
How do you assign the joystick to aileron and elevator?
- In Customization, select the joystick device.
- Find the aileron axis action. Choose its axis-assignment command, then move the stick fully left and fully right when prompted.
- Find the elevator axis action and move the stick fully forward and fully back.
- Look at the on-screen response bar while moving the stick slowly. It should return to its center when you release the stick, unless the hardware has a deliberate center offset.
- Remove duplicate bindings if the simulator assigned the same physical axis to another flight-control action. Duplicate assignments can make the aircraft respond to an unexpected input.
Do not bind aileron or elevator to a button for normal racing. Buttons are useful for discrete commands, but analog axes provide the continuous roll and pitch control needed for gates, turns, and altitude changes.
How do you assign rudder pedals or a twist axis?
Use either the pedal axis or the joystick’s twist axis for rudder. If both are assigned to the same rudder action, the inputs can fight each other; choose one primary yaw device for the profile.
Also popular on Amazon
- 5-in-1 Connectivity: Equipped with a 4K HDMI port, a 5 Gbps USB-C data port, two 5 Gbps USB-A ports, and a USB C 100W PD-IN port. Note: The USB C 100W PD-IN port supports only charging and does not support data transfer devices such as headphones or speakers.
- Powerful Pass-Through Charging: Supports up to 85W pass-through charging so you can power up your laptop while you use the hub. Note: Pass-through charging requires a charger (not included). Note: To achieve full power for iPad, we recommend using a 45W wall charger.
- Transfer Files in Seconds: Move files to and from your laptop at speeds of up to 5 Gbps via the USB-C and USB-A data ports. Note: The USB C 5Gbps Data port does not support video output.
- HD Display: Connect to the HDMI port to stream or mirror content to an external monitor in resolutions of up to 4K@30Hz. Note: The USB-C ports do not support video output.
- What You Get: Anker 332 USB-C Hub (5-in-1), welcome guide, our worry-free 18-month warranty, and friendly customer service.
- Select the pedal device in the Controls screen, or select the joystick if you are using twist.
- Assign the pedal movement (or twist rotation) to the rudder axis.
- Release the pedals or return the stick to neutral and confirm that the indicator settles near center.
- Press the left and right pedal independently. The rudder indicator should move in opposite directions, not the same direction.
- If the nose yaws opposite to your input, use the assignment’s Reverse option rather than physically changing the pedal position.
Rudder pedals are optional when a joystick has a usable twist axis. They become more valuable when you want dedicated yaw control, steadier hands on the stick, or foot-operated braking. Microsoft describes pedals as controlling yaw and braking, while a twist-equipped joystick can supply rudder without a separate pedal set (peripheral guidance).
How do you assign and check the throttle?
- Select the throttle device in the device list.
- Assign the main lever to the aircraft’s throttle axis. Move it through its complete travel while the simulator detects the input.
- Confirm that idle and maximum are at the intended ends of the indicator. A lever that reaches only part of the bar may need calibration in the operating system or a different axis selection.
- Move the lever in small increments and watch that the response is continuous rather than jumping between values.
- Check for accidental bindings to mixture, propeller RPM, brakes, or reverser controls. Keep those assignments only when your aircraft and hardware require them.
For air racing, place the throttle where you can make small power changes without leaning or releasing the stick. A reachable lever is a practical priority because rapid corrections are common in tight turns; Microsoft does not publish one universal racing throttle position or curve.
How do you verify axis direction, center, and range?
Move each control while watching its response in the Controls interface before starting a race. A movement-and-direction check is also recommended in Microsoft Flight Simulator’s community configuration guidance, although that guide dates from 2020 and the current interface may look different (community controller-configuration guide).
- Direction: Left stick should produce the intended left roll; pulling back should produce the intended pitch response; pedal pressure should yaw in the expected direction.
- Center: Release the control and verify that the indicator returns to neutral. A small, consistent offset may require a dead zone; a large or changing offset usually points to calibration or hardware trouble.
- Range: Reach both ends of every axis. If the indicator stops early, inspect calibration, USB connections, and whether the simulator selected the correct axis.
- Isolation: Move one physical control at a time. If another indicator moves, remove the unintended duplicate assignment.
- Buttons: Test any assigned mode, brake, reset, or view buttons separately so a pressed switch does not mask an axis problem.
Should you use sensitivity, dead zones, or response curves?
There is no single sensitivity percentage, curve, or dead-zone value that suits every joystick, pedal set, aircraft, and pilot. Start with the default response, make one small change at a time, and evaluate it in a forgiving flight before entering a timed event.
What’s actually slowing this PC down?
Pick the symptom - the matching free tool is one click away.
A practical tuning sequence
- Load a simple aircraft and a runway or open area where mistakes are easy to recover from.
- Check neutral behavior first. Add only enough dead zone to stop unwanted movement when the control is physically released.
- Fly gentle banks and pitch changes. If the aircraft feels too twitchy near center, reduce center sensitivity gradually or use a milder response curve.
- Try a few larger inputs. If the aircraft reaches full roll or pitch too slowly, restore some response toward the default.
- Repeat for rudder, then throttle. Change only one axis between flights and record what you changed.
- Save a new profile after each useful adjustment so you can revert without losing the original.
Do not tune by copying a number from another player. Hardware travel, firmware, simulator assists, aircraft flight model, and personal grip pressure all change the result. The objective is a controllable center and predictable full travel, not a particular percentage.
What settings matter most for air-racing events?
Prioritize repeatable control over aggressive sensitivity. Microsoft describes the MSFS 2024 Challenge League as competitive and includes point-to-point rally slaloms scored by time; that format rewards precise gates and recoverable corrections, not a supposedly universal “racing preset.”
Also popular on Amazon
- Sleek 7-in-1 USB-C Hub: Features an HDMI port, two USB-A 3.0 ports, and a USB-C data port, each providing 5Gbps transfer speeds. It also includes a USB-C PD input port for charging up to 100W and dual SD and TF card slots, all in a compact design.
- Flawless 4K@60Hz Video with HDMI: Delivers exceptional clarity and smoothness with its 4K@60Hz HDMI port, making it ideal for high-definition presentations and entertainment. (Note: Only the HDMI port supports video projection; the USB-C port is for data transfer only.)
- Double Up on Efficiency: The two USB-A 3.0 ports and a USB-C port support a fast 5Gbps data rate, significantly boosting your transfer speeds and improving productivity.
- Fast and Reliable 85W Charging: Offers high-capacity, speedy charging for laptops up to 85W, so you spend less time tethered to an outlet and more time being productive.
- What You Get: Anker USB-C Hub (7-in-1), welcome guide, 18-month warranty, and our friendly customer service.
- Keep the center predictable: A drifting stick or rudder makes every gate approach harder.
- Protect throttle access: Your hand should reach the lever for a quick power change without disturbing roll input.
- Use coordinated controls: Roll with aileron, add only the rudder needed to keep the nose coordinated, and avoid large pedal inputs that induce unwanted yaw.
- Leave a recovery button available: Keep a familiar pause, reset, or view control reachable, but do not place it where you can press it accidentally during a turn.
- Practice outside competition: Validate the profile in a non-timed flight, then make a short practice run before entering a scored event.
What if MSFS 2024 does not detect a device?
First disconnect and reconnect the device, then reopen the Controls screen and check the device selector. If it still does not appear, use the custom-setup option and consult the manufacturer’s compatibility instructions; do not assume that a PC-only peripheral will function on Xbox.
- Confirm that the device receives power and appears to the operating system.
- Try a different USB port, avoiding an unpowered hub when possible.
- Close other software that may be holding the device exclusively.
- Restart the simulator after reconnecting the hardware.
- On Xbox, confirm the device is an officially supported Xbox model and that its hardware switch is in Xbox mode, if present.
- If the device remains unavailable, create a custom profile only after the simulator can see its input; a custom profile cannot fix a device that the platform does not enumerate.
How do you fix reversed, combined, or missing axes?
The aircraft responds backward
Open the affected assignment and enable Reverse, then repeat the direction check. Reverse only the incorrect axis; reversing the whole device can create new errors.
Free tools Windows power users keep installed
One-click scans. No signup required.
Two controls move one axis
Search the action list for duplicate assignments and remove the unwanted one. This commonly happens when a twist axis remains assigned after pedals are added.
The axis will not reach full travel
Check physical travel first, then operating-system calibration and the selected axis. Reconnect the device and recreate the assignment if the simulator captured the wrong control.
The aircraft moves while the control is untouched
Inspect the center indicator and add a small dead zone only if the movement is consistent. If the center wanders or the value jumps, investigate calibration, firmware, USB power, or hardware wear instead of masking it with a large dead zone.
Throttle reaches idle but not maximum (or the reverse)
Move the lever slowly through its entire range while watching the bar. Reassign the axis, check for a mode switch or dual-lever configuration, and make sure a second lever is not being interpreted as the primary throttle.
The Tool Desk
Outbyte Driver Updater FREEFix the driver behind crashes, sound loss and screen glitchesFind Drivers →Outbyte PC Repair FREEClear out junk files and repair common Windows errorsFree Scan →Also popular on Amazon
- Portable and powerful USB-C HUB: BENFEI USB Type-C HUB, with super-soft and knot-free silicone woven design cable, meets most mobile office needs. Compact, lightweight, stylish, and powerful portable USB C Hub equipped with 1 x HDMI port, 1 x 100W charging, and 3 x USB ports. 18-month warranty, 24-hour response, to ensure you feel at ease when using our product.
- Design centered on comfort and reliability: Thanks to BENFEI's end-to-end in-house cable production capability, in-house PCBA and assembly capability, using the industry's most advanced silicone woven design and process, 20cm cable in length, no knots, super-soft, the HUB is easy to use in all scenarios: laptop, tablet, stand etc. Super-soft, 25000+ life cycles, to meet your daily carrying and office needs.
- 100W Charging: Support up to 90W USB C pass-through charging via Type-C port to keep your laptop powered. 10W is reserved for other interface operations. No data and video function on the Type-C port.
- 4K HDMI Display: The HDMI port supports media display at resolutions up to 4K 30Hz, keeping every incredible moment detailed and ultra vivid. Please note that the C port of the Host device needs to support video output.
- Transfer Files in Seconds: Transfer files and from your laptop at speeds up to 10 Gbps with USB A 3.2 port. Extra 2 USB A 2.0 ports are perfectly for your keyboards and mouse.
Should you use pedals or a joystick twist axis?
Use the twist axis when you want the simplest, lowest-space setup and it centers reliably. Choose pedals when dedicated yaw and braking, a steadier stick hand, or a more cockpit-like layout matters more than desk space and cost.
| Priority | Twist axis | Separate pedals |
|---|---|---|
| Space | Minimal; built into the stick | Requires floor or platform space |
| Yaw control | Hand-controlled rotation | Dedicated foot-controlled axis |
| Braking | Usually requires a separate button or control | May provide toe brakes, depending on the hardware |
| Setup complexity | One device and one axis | Additional device, calibration, and compatibility check |
Neither option is automatically faster. The better choice is the one that stays centered, reaches its full range, and lets you make repeatable corrections.
What should you check before your first race?
Run this checklist after creating or changing the profile:
- All three devices appear in the Controls screen.
- Aileron, elevator, rudder, and throttle each have the intended axis.
- No two physical controls are unintentionally assigned to the same primary axis.
- Each axis moves in the expected direction.
- Each axis reaches both ends of its range and returns to center.
- Throttle movement is smooth from idle to maximum.
- Rudder pedals (or twist) do not drift when released.
- Any sensitivity or dead-zone change is documented in the profile name or notes.
- The profile is saved separately from your general-flight configuration.
- You have made a short, non-timed practice flight after the last change.
If the checklist passes, the remaining work is practice: learn how much roll, pitch, rudder, and power each aircraft needs for its turns. The controls profile gives you consistent inputs; it cannot replace familiarity with an aircraft’s response.
Crashes, No Sound, or Screen Glitches?
Random freezes, missing sound and display glitches usually trace back to one bad driver. Find and replace yours safely.Free scan · under a minuteWindows Errors? Fix Them Before They Spread
Repair common Windows errors and clear accumulated junk for a smoother, more stable PC - no reinstall needed.Free scan · no reinstallHow should you maintain the profile?
Keep a known-good baseline and duplicate it before experimenting. When you add a new peripheral, configure that device in the duplicate profile first, then verify every axis because a new preset can introduce overlapping assignments. Recheck the profile after simulator updates or hardware firmware changes, especially if an axis name or device mode changes.
For multiple aircraft, start with the same primary axes and create aircraft-specific profiles only when a model needs additional controls such as propeller RPM, mixture, flaps, or specialized brakes. This keeps your racing muscle memory consistent while allowing the simulator’s aircraft-specific functions to remain available.
Also popular on Amazon
- 【Read before You Buy】 Note: This adapter is USB 2.0 version and cannot transmit HDM, VGA, or other video signals. Nevertheless, they are fully capable of charging devices,duplicating files, and can be seamlessly integrated with USB-C earphones, wireless network adapters, and SD card adapters.
- 【Easy to Use and Safe】Thanks to modern manufacturing techniques, we've made these adapters sufficiently compact so that they can remain inserted in your device without noticeable protrusion or inconvenience. This means you don't have to constantly plug and unplug them, reducing the likelihood of wear and misalignment, and making them more convenient to carry around.
- 【Reliable Quality】Engineered for enhanced durability, durable aluminum alloy shell material,get excellent wear resistance and heat dissipation,the male USB C and female USB connectors & the male USB and female USB C connectors are designed to be plugged and unplugged up to 20000 times. Provides data transfer, device charging, memory space expansion, and additional computer peripherals.
- 【Think more for you】Do you need to connect a USB-C-enabled device to an odd device that only has USB-A ports? Then these USB-A male to USB-C female adapters are made for you.Simply insert the adapter into the USB-A port on the device, and you can instantly connect your USB-C device to the device that originally didn't have the correct connection port.
- 【Trusted xiwxi Quality and Service】As a responsible brand seller, you will receive xiwxi's 12-month Quality assurance and lifetime friendly customer service, you're not just buying a product,you're investing in peace of mind with all-round quality and exceptional customer service.
Frequently Asked Questions
Can I race in MSFS 2024 with only a joystick and no pedals?
Yes. If the joystick has a twist axis, assign it to rudder and use the joystick’s buttons or aircraft controls for braking as needed. Separate pedals are an upgrade for dedicated yaw and possible toe-brake input, not a prerequisite for air racing.
Why does my rudder keep moving when my feet are off the pedals?
Check whether the joystick twist axis is still assigned to rudder, then inspect the center indicator for drift. A small dead zone can mask a stable center offset, but a wandering value points toward calibration, connection, firmware, or hardware issues.
Can one throttle lever control mixture and propeller RPM too?
Some throttles provide multiple levers that can be assigned to throttle, mixture, or propeller RPM, and Microsoft notes these functions in its peripheral guidance. Assign additional levers only when the aircraft requires them; otherwise leave them free to avoid unintended engine changes.
Will my PC joystick automatically work on Xbox Series X|S?
No. Microsoft warns that most PC flight peripherals are not Xbox-compatible. Confirm Xbox support from the manufacturer and use the device’s Xbox mode switch when one is provided before trying to create a simulator profile.
Where should I practice a new sensitivity curve?
Use a forgiving aircraft and an uncrowded flight where you can make gentle banks, pitch changes, and throttle movements with time to recover. Save the original profile, change one axis at a time, and make a short practice run before entering a timed event.

