Some links on this page are affiliate links: if you buy through them we may earn a commission, at no extra cost to you.
Mechanical keyboard switch types—linear, tactile, and clicky—determine how a key feels, when it registers, and how much noise it makes. There is no universal best switch: choose the feedback and sound you want first, then check a specific model’s force, pre-travel, total travel, and compatibility with your keyboard.
Linear switches are smooth, tactile switches add a physical bump, and clicky switches combine that bump with an intentional audible click. The sections below explain those differences, show real CHERRY MX specifications, and give a practical method for choosing without confusing a category label with a complete specification.
As an Amazon Associate I earn from qualifying purchases.
Recommended Free Tools
What are the three mechanical keyboard switch types?
The three labels describe the switch’s feedback during a keypress, not its entire personality. Two switches in the same category can differ noticeably in force, actuation distance, spring behavior, and sound.
| Type | What you feel | What you hear | Typical reason to choose it | Main trade-off |
|---|---|---|---|---|
| Linear | Smooth travel with no intentional bump | Usually less switch noise than clicky, but the board can still be loud | Consistent, uninterrupted presses | Light or short-travel models can feel sensitive and cause accidental presses |
| Tactile | A noticeable bump at the actuation point | The bump itself need not be an audible click | Physical confirmation without prominent click noise | Bump shape and force vary widely between models |
| Clicky | A tactile bump plus a click mechanism | Distinct, deliberate click | Strong audible and physical feedback | Can disturb people nearby, especially in shared offices |
Corsair defines linear switches as offering a smooth keystroke without tactile feedback. CHERRY describes a tactile switch as one with a noticeable actuation point in its MX overview. Those definitions are useful starting points, but the model’s numbers and the keyboard around it determine the final feel.
Popular on Amazon
- 【90 Degree Full Function USB C Adapter】Supports the latest USB4 standard for up to 40Gbps of bandwidth, 8K video support, and up to 240W Fast charging; Support USB PD 3.1 Extended Power Range (EPR) including 140W, 180W and 240W. Your productivity is easily doubled. *Warm Tip: For the best fit, please make sure the USB-C port is fully exposed; thick or bulky cases may affect compatibility.
- 【Reliable Quality】Made from high-quality, scratch-resistant aluminum alloy, delicate metal frame. get excellent wear resistance and heat dissipation. Non-Slip Design for easier insertion and removal.
- 【Small and portable】Ultra thin size, ultra compact design, a petite physique that matches the minimalist design of your modern laptops. Coming with a slim figure that won't block the port next to the one it's plugged into.
- 【Compatibility】Widely work with most usb c, thunderbolt 4/3 devices. Compatibilit for ROG Ally, Steam Deck, Switch, MacBook Pro, Quest 3 VR headset, Surface Book 2, iPhone 18/17/16/15, Samsung Galaxy S23/S22/S21, Note 20/10, Google Pixel, ChromeBook, etc.
- 【Excellence Customer Support】If you experience any issues or cable failure, simply reach out to our dedicated customer service team. We provide a prompt response within 18 hours, providing you with the necessary technical support to resolve any concerns.
How do linear switches feel?
A linear switch moves down in one continuous motion until it bottoms out. There is no bump to signal the actuation point and no internal click mechanism. People who like an even, predictable press often prefer this behavior, while users who rely on a bump to avoid unintended presses may need time to adjust.
Linear does not mean silent. A keycap striking the switch housing or the plate can create a sharp bottom-out sound, and a spring can make its own noise. A purpose-built silent linear variant can reduce switch noise, but the keyboard’s case, plate, stabilizers, and keycaps still affect what people hear.
The Tool Desk
Outbyte Driver Updater FREEScan for outdated or missing drivers - takes under a minuteDriver Scan →Outbyte PC Repair FREEClear out junk files and repair common Windows errorsFree Scan →What do common linear specifications look like?
CHERRY’s 2020 MX article lists the MX Red at 45 cN actuation force and 2 mm pre-travel, the MX Black at 60 cN and 2 mm, and the MX Speed Silver at 45 cN and 1.2 mm. The figures describe those particular models, not all linear switches. CHERRY also says the Red is popular among gamers; that is manufacturer context rather than an independent preference study.
The shorter pre-travel of Speed Silver can register a press earlier, but it can also feel more sensitive. CHERRY’s statement that Speed Silver is up to 40 percent faster than MX Red is a manufacturer claim, not an independently verified performance result.
How do tactile switches feel?
A tactile switch adds resistance that rises and then releases around the actuation point. That bump gives your finger physical confirmation that the key has registered, so you do not have to bottom out every press to know it worked. The bump can be subtle, rounded, sharp, early, or late depending on the design.
Tactile does not automatically mean loud. A tactile switch can make a sound when the stem and keycap move, and every key produces some bottom-out and return noise, but it lacks the separate click mechanism found in a clicky switch. This makes tactile a sensible starting point for people who want feedback while sharing a room.
Also popular on Amazon
- 5-in-1 Connectivity: Equipped with a 4K HDMI port, a 5 Gbps USB-C data port, two 5 Gbps USB-A ports, and a USB C 100W PD-IN port. Note: The USB C 100W PD-IN port supports only charging and does not support data transfer devices such as headphones or speakers.
- Powerful Pass-Through Charging: Supports up to 85W pass-through charging so you can power up your laptop while you use the hub. Note: Pass-through charging requires a charger (not included). Note: To achieve full power for iPad, we recommend using a 45W wall charger.
- Transfer Files in Seconds: Move files to and from your laptop at speeds of up to 5 Gbps via the USB-C and USB-A data ports. Note: The USB C 5Gbps Data port does not support video output.
- HD Display: Connect to the HDMI port to stream or mirror content to an external monitor in resolutions of up to 4K@30Hz. Note: The USB-C ports do not support video output.
- What You Get: Anker 332 USB-C Hub (5-in-1), welcome guide, our worry-free 18-month warranty, and friendly customer service.
What is a representative tactile specification?
CHERRY MX Brown is listed at 55 cN actuation force and 2 mm pre-travel. CHERRY identifies it as tactile without an audible click. The 55 cN figure is heavier than MX Red’s 45 cN rating, but force curves—not just the headline number—also influence how the bump feels.
How do clicky switches feel and sound?
Clicky switches combine a tactile bump with a mechanism designed to create an audible click during the press. The click gives clear confirmation, and many enthusiasts choose it specifically because the sound is part of the typing experience.
The same sound can be a liability in a shared workspace, classroom, studio, or video call. CHERRY explicitly says MX Blue’s click makes it unsuitable for large offices. That is a setting-specific warning, not a claim that every clicky switch has identical volume; construction and switch design still matter.
What are the MX Blue numbers?
CHERRY lists MX Blue at 60 cN actuation force and 2.2 mm pre-travel. Its standard total travel is 4.0 mm in Corsair’s comparison chart. The extra 0.2 mm of pre-travel compared with MX Red or Brown is a model specification, not a definition of all clicky switches.
What’s actually slowing this PC down?
Pick the symptom - the matching free tool is one click away.
What do actuation force, pre-travel, and total travel mean?
These measurements explain why two switches that share a category label can feel different. Operating or actuation force is the force needed to trigger the electrical contact. It is commonly shown in gram-force (gf) or centinewtons (cN); RTINGS notes that the units are approximately equivalent.
- Actuation force: how much force is required for the keypress to register. A higher number generally feels heavier, but the shape of the force curve matters too.
- Pre-travel: the distance the stem moves before the keyboard registers the press. Shorter pre-travel can feel quick and may also make accidental presses more likely.
- Total travel: the full distance from the key’s resting position to bottom out. It includes the pre-travel and the remaining movement after actuation.
The following figures combine CHERRY’s model specifications with the total-travel values in Corsair’s comparison chart. They are not category averages.
Also popular on Amazon
- Sleek 7-in-1 USB-C Hub: Features an HDMI port, two USB-A 3.0 ports, and a USB-C data port, each providing 5Gbps transfer speeds. It also includes a USB-C PD input port for charging up to 100W and dual SD and TF card slots, all in a compact design.
- Flawless 4K@60Hz Video with HDMI: Delivers exceptional clarity and smoothness with its 4K@60Hz HDMI port, making it ideal for high-definition presentations and entertainment. (Note: Only the HDMI port supports video projection; the USB-C port is for data transfer only.)
- Double Up on Efficiency: The two USB-A 3.0 ports and a USB-C port support a fast 5Gbps data rate, significantly boosting your transfer speeds and improving productivity.
- Fast and Reliable 85W Charging: Offers high-capacity, speedy charging for laptops up to 85W, so you spend less time tethered to an outlet and more time being productive.
- What You Get: Anker USB-C Hub (7-in-1), welcome guide, 18-month warranty, and our friendly customer service.
| Model | Type | Actuation force | Pre-travel | Total travel |
|---|---|---|---|---|
| MX Red | Linear | 45 cN (about 45 gf) | 2.0 mm | 4.0 mm |
| MX Black | Linear | 60 cN | 2.0 mm | 4.0 mm |
| MX Brown | Tactile | 55 cN | 2.0 mm | 4.0 mm |
| MX Blue | Clicky | 60 cN | 2.2 mm | 4.0 mm |
| MX Speed Silver | Linear | 45 cN | 1.2 mm | 3.4 mm |
Do not read these numbers as a ranking. A 60 cN switch is not automatically better for typing than a 45 cN switch, and a shorter travel is not automatically faster in real work. The figures let you compare specific products after you decide which feedback you want.
Which switch type is best for gaming, typing, or programming?
The best choice depends on your hands, environment, and tolerance for mistakes and noise. Use this decision path instead of assuming that one type wins every task.
- Start with feedback. Choose smooth travel if you dislike bumps, a tactile bump if you want confirmation without an intentional click, or a clicky mechanism if audible feedback is a priority.
- Choose a force range. Compare the actual model’s actuation force. Lighter switches can reduce the effort of repeated presses but may feel easier to trigger accidentally; heavier switches can feel more deliberate and may cause fatigue for some users.
- Check pre-travel and total travel. A 1.2 mm pre-travel model such as MX Speed Silver will not feel like a 2.0 mm MX Red even though both are linear.
- Account for your room. Clicky switches are the clearest sound risk. If you need lower noise, consider a silent variant and evaluate the whole keyboard rather than relying on the word linear.
- Try before committing. Store displays, keyboard meetups, and switch tester kits can reveal whether the bump, spring weight, and sound suit you. A tester shows the switch, but it cannot guarantee the same sound in a different case and plate.
For gaming, some people favor a smooth linear press or short pre-travel; that is a preference, not proof that linears produce better results. For office typing, tactile switches can provide feedback without the obvious click, while clicky switches work best when nearby listeners are comfortable with the noise. For programming and long writing sessions, force and fatigue matter at least as much as the category name.
How much noise should you expect?
Clicky switches have the most obvious built-in sound because the click mechanism is intentional. Tactile switches can still be audible, especially when keys bottom out, but their bump does not require a click. Linear switches often produce less switch-generated noise, yet a hard bottom-out, rattling stabilizer, hollow case, or resonant desk can make a linear board surprisingly loud.
Noise is therefore a system property. Consider the switch, keycap material, plate and case construction, stabilizers, typing force, and whether the keyboard has a silent switch design. If other people share the space, listen to a complete keyboard or a tester in a similar board rather than relying on a category label.
Can you replace switches in any mechanical keyboard?
No. Before buying replacement switches, verify the keyboard’s socket or mounting format and the switch profile. Standard-profile examples such as the MX models above are dimensionally different from low-profile switches, and a category name by itself says nothing about physical compatibility.
Do these 3 things before closing this tab:
1Scan for outdated or missing drivers - takes under a minute2Repair Windows errors before they cause bigger problems3Fix the driver behind crashes, sound loss and screen glitchesAlso popular on Amazon
- Portable and powerful USB-C HUB: BENFEI USB Type-C HUB, with super-soft and knot-free silicone woven design cable, meets most mobile office needs. Compact, lightweight, stylish, and powerful portable USB C Hub equipped with 1 x HDMI port, 1 x 100W charging, and 3 x USB ports. 18-month warranty, 24-hour response, to ensure you feel at ease when using our product.
- Design centered on comfort and reliability: Thanks to BENFEI's end-to-end in-house cable production capability, in-house PCBA and assembly capability, using the industry's most advanced silicone woven design and process, 20cm cable in length, no knots, super-soft, the HUB is easy to use in all scenarios: laptop, tablet, stand etc. Super-soft, 25000+ life cycles, to meet your daily carrying and office needs.
- 100W Charging: Support up to 90W USB C pass-through charging via Type-C port to keep your laptop powered. 10W is reserved for other interface operations. No data and video function on the Type-C port.
- 4K HDMI Display: The HDMI port supports media display at resolutions up to 4K 30Hz, keeping every incredible moment detailed and ultra vivid. Please note that the C port of the Host device needs to support video output.
- Transfer Files in Seconds: Transfer files and from your laptop at speeds up to 10 Gbps with USB A 3.2 port. Extra 2 USB A 2.0 ports are perfectly for your keyboards and mouse.
Check the keyboard maker’s documentation for the supported switch family, pin layout, and whether the board accepts the type of replacement you intend to install. Also confirm that the keycaps match the switch stem and profile. If any of those details are unknown, a compatible tester or the keyboard’s exact model documentation is safer than ordering by color or category alone.
How long do mechanical switches last?
Durability figures are manufacturer ratings, not guarantees of identical life in every keyboard. CHERRY’s April 2020 article reported more than 100 million actuations for its then-modern MX Red, Black, Brown, and Speed Silver variants, while Blue and Silent variants were listed at 50 million. Those numbers should be checked against the exact current product generation before purchase.
Actuation ratings also do not cover every part of a keyboard. Keycaps, stabilizers, sockets, solder joints, springs, and the controller can fail or wear differently. Treat a published number as a rated endurance figure for that switch generation, not as a promise that the complete keyboard will last that many presses.
Are shorter-travel switches actually faster?
A shorter pre-travel means the switch reaches its actuation point after less stem movement, which can feel more immediate. It does not prove that a person will type or play faster, because reaction time, key release, software, and accuracy also matter.
For example, CHERRY lists MX Speed Silver at 1.2 mm pre-travel versus 2.0 mm for MX Red and describes it as up to 40 percent faster. That comparison is CHERRY’s marketing claim; the specification supports the shorter distance, but the speed statement is not an independent benchmark.
Independent reader supportYour contribution helps us test, update, and keep practical guides available for everyone.What is the safest way to choose a switch?
Use a four-part checklist: feedback, force, travel, and setting. Write down whether you want smooth, bump, or bump-plus-click feedback; select a tolerable force; decide whether short or standard travel suits your accuracy; and make sure the sound is acceptable where you work or play.
Also popular on Amazon
- 【Read before You Buy】 Note: This adapter is USB 2.0 version and cannot transmit HDM, VGA, or other video signals. Nevertheless, they are fully capable of charging devices,duplicating files, and can be seamlessly integrated with USB-C earphones, wireless network adapters, and SD card adapters.
- 【Easy to Use and Safe】Thanks to modern manufacturing techniques, we've made these adapters sufficiently compact so that they can remain inserted in your device without noticeable protrusion or inconvenience. This means you don't have to constantly plug and unplug them, reducing the likelihood of wear and misalignment, and making them more convenient to carry around.
- 【Reliable Quality】Engineered for enhanced durability, durable aluminum alloy shell material,get excellent wear resistance and heat dissipation,the male USB C and female USB connectors & the male USB and female USB C connectors are designed to be plugged and unplugged up to 20000 times. Provides data transfer, device charging, memory space expansion, and additional computer peripherals.
- 【Think more for you】Do you need to connect a USB-C-enabled device to an odd device that only has USB-A ports? Then these USB-A male to USB-C female adapters are made for you.Simply insert the adapter into the USB-A port on the device, and you can instantly connect your USB-C device to the device that originally didn't have the correct connection port.
- 【Trusted xiwxi Quality and Service】As a responsible brand seller, you will receive xiwxi's 12-month Quality assurance and lifetime friendly customer service, you're not just buying a product,you're investing in peace of mind with all-round quality and exceptional customer service.
Then sample several switches, ideally in a tester kit containing linear, tactile, and clicky options. Press them slowly and at normal typing speed, listen for bottom-out noise, and test longer sessions if possible. Finally, confirm the tester’s switches use the same profile and mounting format your keyboard supports. This process avoids the common mistake of buying a switch because its color or reputation sounds right while ignoring the specifications that determine fit and feel.
How were these switch categories and examples selected?
The categories and definitions follow the manufacturer explanations from CHERRY and Corsair, while the selection guidance reflects RTINGS’ advice to compare force and travel and to try samples before buying. Ars Technica’s mechanical-keyboard guide provides additional context on how switch behavior interacts with the rest of a keyboard. The numerical examples are specific manufacturer specifications, not independent tests or a survey of user preferences.
Quick wins for a faster PC:
Repair Windows errors before they cause bigger problemsFix Now →Scan for outdated or missing drivers - takes under a minuteDriver Scan →Sources
- CHERRY, [HOW TO] DIY KEYBOARD – PART 3: CHERRY MX ORIGINAL OVERVIEW (April 2020)
- Corsair, Keyboard Switches: An Introduction
- RTINGS, Mechanical Switches: How to Choose
- Ars Technica, The Ars Technica guide to mechanical keyboards
Frequently Asked Questions
Do tactile switches make a clicking sound?
Not necessarily. Tactile switches create a physical bump, while clicky switches add a separate mechanism intended to produce an audible click. A tactile board can still make bottom-out and keycap noise, so listen to the complete keyboard if quiet operation matters.
Can I use low-profile switches with standard keycaps?
Usually you should not assume they are interchangeable. Low-profile switches have different dimensions from standard-profile designs, and the switch, keycap, and keyboard mounting format must be matched as a system. Check the keyboard documentation before ordering.
Will a switch tester sound the same as my finished keyboard?
No. A tester is useful for comparing the bump, force, and basic click, but the case, plate, stabilizers, keycaps, and desk change the final sound. Treat the tester as a preference check rather than an acoustic prediction.
Are manufacturer actuation ratings the same as typing feel?
No. Actuation force is one point on a force curve. Spring behavior, the shape and position of a tactile bump, pre-travel, total travel, and bottom-out force all contribute to how the press feels.

