The Tool Desk
Outbyte PC Repair FREEClear out junk files and repair common Windows errorsFree Scan →Outbyte Driver Updater FREEScan for outdated or missing drivers - takes under a minuteDriver Scan →Some links on this page are affiliate links: if you buy through them we may earn a commission, at no extra cost to you.
Leap seconds and leap smears are two different ways of keeping computer clocks aligned with time standards when Earth’s rotation and atomic time diverge. A direct leap second inserts an unusual UTC label, 23:59:60; a smear changes a clock’s rate over an interval so no single second is inserted. The right choice depends on whether your system prioritizes direct UTC traceability, smooth and monotonic timestamps, compatibility, or very tight synchronization.
Policy is also changing: an International Telecommunication Union (ITU) release dated October 30, 2026, says the General Conference on Weights and Measures (CGPM) adopted resolutions establishing continuous UTC from May 20, 2027, and ending leap-second insertions. The release does not provide all implementation details, so existing systems still need documented behavior until authoritative transition guidance is published.
As an Amazon Associate I earn from qualifying purchases.
| Name | Best for | Key spec | Checked |
|---|---|---|---|
| Direct UTC leap second | Applications requiring an UTC-traceable civil-time realization | Positive event is written as 23:59:60; abrupt adjustment at a UTC day boundary |
November 2026 |
| Leap smear | Distributed applications that need smooth, usually monotonic wall-clock readings | Clock rate is changed over a selected interval; no 23:59:60 label |
November 2026 |
| Provider-specific hybrid path | Environments using both network time and precision hardware clocks | Example: AWS documentation describes smearing on NTP while its PTP hardware clock follows UTC leap-second standards | November 2026 |
What is a leap second?
A leap second is a one-second adjustment to Coordinated Universal Time (UTC) intended to keep UTC close to UT1, a time scale derived from Earth’s rotation. Atomic clocks provide the stable rate behind UTC, while Earth’s rotation is irregular. Under the current system, adjustments keep the difference between UT1 and UTC within plus or minus 0.9 seconds. The basic relationship is explained in NIST’s leap-second information.
A positive leap second adds one second to the UTC sequence. At the event, a clock can show:
Popular on Amazon
- 【90 Degree Full Function USB C Adapter】Supports the latest USB4 standard for up to 40Gbps of bandwidth, 8K video support, and up to 240W Fast charging; Support USB PD 3.1 Extended Power Range (EPR) including 140W, 180W and 240W. Your productivity is easily doubled. *Warm Tip: For the best fit, please make sure the USB-C port is fully exposed; thick or bulky cases may affect compatibility.
- 【Reliable Quality】Made from high-quality, scratch-resistant aluminum alloy, delicate metal frame. get excellent wear resistance and heat dissipation. Non-Slip Design for easier insertion and removal.
- 【Small and portable】Ultra thin size, ultra compact design, a petite physique that matches the minimalist design of your modern laptops. Coming with a slim figure that won't block the port next to the one it's plugged into.
- 【Compatibility】Widely work with most usb c, thunderbolt 4/3 devices. Compatibilit for ROG Ally, Steam Deck, Switch, MacBook Pro, Quest 3 VR headset, Surface Book 2, iPhone 18/17/16/15, Samsung Galaxy S23/S22/S21, Note 20/10, Google Pixel, ChromeBook, etc.
- 【Excellence Customer Support】If you experience any issues or cable failure, simply reach out to our dedicated customer service team. We provide a prompt response within 18 hours, providing you with the necessary technical support to resolve any concerns.
23:59:59
23:59:60
00:00:00 (next date)
The extra label is not a second time zone or a new time scale. It is an additional UTC second inserted before midnight. Positive leap seconds have historically been scheduled at the end of June or December, although the standards allow other month-end placements. No negative leap second has occurred. If one were ever scheduled, a second would be omitted from the normal sequence rather than adding 23:59:60; NIST describes that possibility in its Leap Seconds FAQs.
How does a direct leap second work in a computer system?
A direct realization tries to represent UTC as specified, including the exceptional event. That sounds simple for a clock display, but operating systems, timestamp formats and network protocols do not all provide a single representation for the extra second.
Recommended Free Tools
- Receive an announcement. National timing authorities announce an upcoming insertion in advance. A time server or grandmaster then distributes the information through its protocol and configuration.
- Approach the event. The clock follows ordinary UTC labels until
23:59:59. - Realize the extra second. Depending on the implementation, the clock may expose
23:59:60, hold a displayed value for a second, step, repeat a label, or use another protocol-specific representation. - Resume normal UTC. After the event, the sequence continues at
00:00:00on the next date.
NIST’s Internet Time Service documents one concrete behavior: it stops its time-service clock for one second at 23:59:59 when a positive leap second occurs. That is a behavior of that service, not a universal rule for all NTP servers. NIST also warns that time messages may not reveal how a server realizes the event, which is why two apparently valid sources can disagree at the boundary.
Software that assumes every minute has exactly 60 representable seconds can fail when it encounters 23:59:60. Parsers may reject the value, databases may normalize it to the next minute, and schedulers may run an action twice or not at all if they use wall-clock labels as event counters. A direct UTC design therefore requires explicit handling in timestamp parsing, ordering, logging and replay code.
How does a leap smear work?
A leap smear distributes the one-second correction over a chosen period by changing the clock’s effective rate. Instead of inserting a distinct 23:59:60 label, the smeared clock runs very slightly faster or slower than nominal UTC during the smear window. The adjustment is gradual, so applications see a continuous progression of ordinary-looking timestamps.
The interval and curve are implementation choices. A provider might use a linear adjustment, a centered window, or another defined profile. Google’s public NTP documentation describes a 24-hour smear and says Amazon uses the same smear. A 24-hour window is an example, not a universal standard: another service can choose a different duration or curve.
Quick wins for a faster PC:
Clear out junk files and repair common Windows errorsFree Scan →Fix the driver behind crashes, sound loss and screen glitchesFind Drivers →Repair Windows errors before they cause bigger problemsFix Now →Smearing improves smoothness and often makes wall-clock readings monotonic through the event, but it changes the clock’s relationship to UTC during the window. At a particular instant, a smeared source and a direct UTC source can differ by a fraction of a second. The difference is intentional, not necessarily a synchronization failure. Systems must know the smear definition if they compare, correlate or reconcile timestamps from multiple sources.
Also popular on Amazon
- 5-in-1 Connectivity: Equipped with a 4K HDMI port, a 5 Gbps USB-C data port, two 5 Gbps USB-A ports, and a USB C 100W PD-IN port. Note: The USB C 100W PD-IN port supports only charging and does not support data transfer devices such as headphones or speakers.
- Powerful Pass-Through Charging: Supports up to 85W pass-through charging so you can power up your laptop while you use the hub. Note: Pass-through charging requires a charger (not included). Note: To achieve full power for iPad, we recommend using a 45W wall charger.
- Transfer Files in Seconds: Move files to and from your laptop at speeds of up to 5 Gbps via the USB-C and USB-A data ports. Note: The USB C 5Gbps Data port does not support video output.
- HD Display: Connect to the HDMI port to stream or mirror content to an external monitor in resolutions of up to 4K@30Hz. Note: The USB-C ports do not support video output.
- What You Get: Anker 332 USB-C Hub (5-in-1), welcome guide, our worry-free 18-month warranty, and friendly customer service.
What is the difference between a leap second and a leap smear?
| Comparison axis | Direct leap second | Leap smear |
|---|---|---|
| UTC traceability | Represents the UTC event itself, subject to the protocol’s handling of the exceptional label. | Is deliberately offset from direct UTC during the smear interval. |
| Monotonicity and smoothness | Can require a step, hold, repeat or special timestamp handling. | Changes the rate gradually and avoids an abrupt label insertion. |
| Deviation and interval | Concentrates the adjustment at the event. | Spreads the adjustment over a provider-selected interval and curve. |
| Compatibility | Requires clients, parsers and databases to tolerate leap-second behavior. | Requires every comparing system to understand the same smear window and profile. |
| Best precision model | Useful when the recorded value must track UTC directly. | Useful when consistent progression is more important than instantaneous UTC traceability. |
ITU’s technical report explains the underlying trade-off: it has proved impossible to define one time scale that is simultaneously monotonic, smoothly varying and traceable to UTC across a leap second. Every design chooses which property to relax, or uses separate time scales for different jobs.
Why do some clocks show a different time around a leap second?
Different clocks can be correct according to different time scales or realization rules. One source may be direct UTC, another may be a 24-hour smear, and a third may temporarily stop or repeat a displayed value. During the event or smear window, their timestamps are not expected to match exactly.
The most dangerous case is silent mixing. Suppose database servers use a smeared NTP service while an audit appliance uses an unsmeared UTC source. A transaction recorded near the event can appear earlier or later than an audit record even though both systems are synchronized to their chosen sources. The same problem can affect distributed locks, message ordering, certificate validation, telemetry correlation and incident timelines.
Document the time scale and synchronization behavior alongside the source identity. If possible, retain an origin identifier, leap indicator, smear profile and monotonic sequence number in operational records. Do not infer a server’s behavior merely from an NTP packet format; NIST notes that the format does not always identify how the server realizes a leap.
How do NIST, Google and AWS handle leap events?
There is no universal behavior even among major time services. The published documentation describes these specific paths:
- NIST Internet Time Service: NIST says its service adds a positive leap second by stopping its clock for one second at
23:59:59. That behavior belongs to the NIST service and should not be generalized to every NTP implementation. - Google Public NTP: Google documents a 24-hour leap smear. Its guidance also states that Amazon uses the same smear approach for the referenced service.
- AWS EC2 time paths: Current EC2 documentation says the Amazon Time Sync Service smears leap seconds over NTP, while its PTP hardware clock adds leap seconds according to UTC standards. This is a distinction between service paths, not a claim that an entire cloud environment uses one method.
When configuring an instance, check which protocol and endpoint the application actually uses. An NTP client and a PTP client on the same host can intentionally report different values near a leap event if they follow those separate policies.
Which method should a data centre or distributed system choose?
Choose based on the system’s required time semantics, not on the label “more accurate.” ITU identifies several decision axes that expose the real trade-offs.
Also popular on Amazon
- Sleek 7-in-1 USB-C Hub: Features an HDMI port, two USB-A 3.0 ports, and a USB-C data port, each providing 5Gbps transfer speeds. It also includes a USB-C PD input port for charging up to 100W and dual SD and TF card slots, all in a compact design.
- Flawless 4K@60Hz Video with HDMI: Delivers exceptional clarity and smoothness with its 4K@60Hz HDMI port, making it ideal for high-definition presentations and entertainment. (Note: Only the HDMI port supports video projection; the USB-C port is for data transfer only.)
- Double Up on Efficiency: The two USB-A 3.0 ports and a USB-C port support a fast 5Gbps data rate, significantly boosting your transfer speeds and improving productivity.
- Fast and Reliable 85W Charging: Offers high-capacity, speedy charging for laptops up to 85W, so you spend less time tethered to an outlet and more time being productive.
- What You Get: Anker USB-C Hub (7-in-1), welcome guide, 18-month warranty, and our friendly customer service.
Choose direct UTC when traceability is the priority
Use a direct UTC realization when legal, scientific, navigation, telecommunications or audit requirements depend on the civil-time value itself. You must then verify that every parser, database, message format and monitoring tool can handle a leap event. Store an unambiguous representation for the exceptional second rather than assuming a conventional ISO timestamp parser will accept it.
Choose a smear when smooth ordering is the priority
A smear can simplify systems that require continuously increasing wall-clock readings, such as distributed logs, coordination services and application-level ordering. The benefit comes only when all participating hosts use the same smear definition. A host that silently switches to an unsmeared source can introduce an offset during the smear window.
Use separate time scales for elapsed time and civil time
Wall-clock UTC is the wrong primitive for measuring durations across adjustments. Use a monotonic operating-system clock for timeouts and latency, and use a documented UTC or atomic-derived scale for externally visible timestamps. In high-precision infrastructure, ITU’s data-centre guidance discusses PTP and TAI-based designs for workloads that need tighter guarantees than ordinary NTP commonly provides.
Consider the required precision
NTP is adequate for many user applications. Demanding distributed storage, trading, measurement or control systems may require PTP, a GNSS-fed grandmaster or a time appliance with tighter and more explicit guarantees. ITU describes GNSS signals reaching data centres through timing appliances; the hardware is a distribution component, not a substitute for deciding which time scale your software should consume.
PC Slower Than It Used to Be?
A free scan shows the junk files, broken settings and background clutter dragging Windows down - then fixes them in one click.Free scan · Windows 10 & 11Crashes, No Sound, or Screen Glitches?
Random freezes, missing sound and display glitches usually trace back to one bad driver. Find and replace yours safely.Free scan · under a minuteHow can you make software safe around leap seconds and smears?
- Inventory every source. List NTP servers, PTP grandmasters, hypervisor clocks, GNSS appliances, operating-system services and external APIs.
- Record the time scale. Mark each source as direct UTC, smeared UTC, TAI-derived or otherwise specified. Include the provider’s smear interval and curve when applicable.
- Separate wall time from elapsed time. Use monotonic clocks for retries, leases, cache expiry, scheduling intervals and latency measurements.
- Make timestamp parsing explicit. Decide how your format represents
23:59:60, repeated labels, or a provider’s smear. Reject ambiguous input or normalize it with an audit trail. - Prevent accidental source mixing. Keep a service’s synchronization policy consistent across hosts that compare timestamps. If mixing is unavoidable, convert through a known reference and retain the source metadata.
- Test simulated events. Exercise positive and theoretical negative-leap paths in a staging environment, including database ordering, message deduplication, certificate checks, cron-like schedules and monitoring alerts. This is a software simulation exercise, not evidence that a production provider will use the same event behavior.
- Monitor offset and rate. Alert on both absolute offset and sudden rate changes. A smear is a planned rate change; a direct leap can look like a step or hold. Monitoring should distinguish those cases from a failed time source.
- Document failover. Specify what happens when the preferred source is unavailable. Failing over from a smeared NTP source to an unsmeared source can create a visible timestamp discontinuity even if both sources are individually healthy.
What are the common failure modes?
| Failure | Why it happens | Mitigation |
|---|---|---|
Parser rejects 23:59:60 |
The format or library assumes seconds range only from 00 through 59. | Use a leap-aware parser or define a lossless normalization policy with an audit field. |
| Events appear out of order | Hosts use different smear windows or mix smeared and unsmeared feeds. | Standardize the source and record the time-scale policy. |
| Duplicate scheduled job | A scheduler keys work directly to a repeated or stepped wall-clock label. | Use unique event IDs and monotonic deadlines instead of wall time alone. |
| False synchronization alarm | Monitoring treats an intentional smear rate change or leap hold as a fault. | Load the provider’s published leap policy into alert thresholds and maintenance calendars. |
| PTP and NTP disagree | They follow different realization rules, as documented for some service paths. | Choose one path for each workload and define conversion and failover behavior. |
How many leap seconds have occurred?
NIST’s 2025 Time and Frequency Bulletin lists 27 positive leap-second insertions from 1972 through 2016. An ITU historical article also describes 27 leap seconds between 1972 and 2017. Those statements use different reference ranges; preserve the source’s date range rather than turning the number into a claim about every later year.
NIST’s 2025 bulletin also records that no leap second was inserted at the end of June 2025. Historical counts do not predict whether a future insertion will be scheduled: the decision depends on observed and forecast UT1 behavior and the governing announcements.
What changes on May 20, 2027?
The ITU’s October 30, 2026, press release says that CGPM adopted resolutions in October 2026 establishing continuous UTC from May 20, 2027, and ending leap-second insertions. The stated goal is to reduce risks for digital systems and critical infrastructure. ITU Director Mario Maniewicz summarized the stakes: “We rarely think about precise time, yet modern communications, navigation and critical infrastructure depend on it every second.”
Also popular on Amazon
- Portable and powerful USB-C HUB: BENFEI USB Type-C HUB, with super-soft and knot-free silicone woven design cable, meets most mobile office needs. Compact, lightweight, stylish, and powerful portable USB C Hub equipped with 1 x HDMI port, 1 x 100W charging, and 3 x USB ports. 18-month warranty, 24-hour response, to ensure you feel at ease when using our product.
- Design centered on comfort and reliability: Thanks to BENFEI's end-to-end in-house cable production capability, in-house PCBA and assembly capability, using the industry's most advanced silicone woven design and process, 20cm cable in length, no knots, super-soft, the HUB is easy to use in all scenarios: laptop, tablet, stand etc. Super-soft, 25000+ life cycles, to meet your daily carrying and office needs.
- 100W Charging: Support up to 90W USB C pass-through charging via Type-C port to keep your laptop powered. 10W is reserved for other interface operations. No data and video function on the Type-C port.
- 4K HDMI Display: The HDMI port supports media display at resolutions up to 4K 30Hz, keeping every incredible moment detailed and ultra vivid. Please note that the C port of the Host device needs to support video output.
- Transfer Files in Seconds: Transfer files and from your laptop at speeds up to 10 Gbps with USB A 3.2 port. Extra 2 USB A 2.0 ports are perfectly for your keyboards and mouse.
The press release is not the full CGPM resolution or an implementation manual. It does not, by itself, establish conversion formulas, dissemination schedules, operating-system update requirements or rules for historical data. Organizations should obtain the adopted resolution and subsequent guidance before changing a production time architecture.
Until the effective date, systems must continue to follow the leap policy of their actual time sources. Afterward, software will still need to read historical leap-second data correctly, preserve the meaning of old timestamps and handle any provider-specific transition. “Continuous UTC” does not erase the past records or make previously smeared and unsmeared timestamps interchangeable.
Independent reader supportYour contribution helps us test, update, and keep practical guides available for everyone.What is the practical verdict: leap second or leap smear?
A direct leap second is the better fit when an application must represent UTC itself and can implement the exceptional event safely. A smear is the better fit when a controlled, documented rate adjustment and monotonic-looking application timestamps are more important than instantaneous UTC traceability. Neither method is universally correct, and a provider can expose both through different protocols.
For most organizations, the essential control is consistency: define the time scale, use monotonic clocks for durations, make leap behavior visible in configuration, and never compare timestamps from sources whose policies you have not verified.
How are leap seconds different from time-zone changes?
A leap second changes the UTC time scale by one second; a time-zone change changes the civil-time offset applied for a geographic or political region. Time-zone databases can update local offsets without any leap event, while a leap second affects the underlying UTC sequence used by every time zone. Treat the two datasets and update processes separately.
Free tools Windows power users keep installed
One-click scans. No signup required.
Can a leap second be negative?
Yes, standards allow a negative leap second in principle, but none has occurred. It would omit a second from the normal sequence rather than creating a 23:59:60 label. Software should therefore avoid hard-coding only the positive case, even though positive handling is the scenario documented by most operational examples.
How can I tell whether an NTP source uses a smear?
Do not assume the packet format will tell you. Check the operator’s current documentation, configuration and leap policy, then compare the source with a known reference during a controlled observation window. NIST notes that time messages do not always identify how a server realizes a leap, so source metadata and provider documentation are essential.
Also popular on Amazon
- 【Read before You Buy】 Note: This adapter is USB 2.0 version and cannot transmit HDM, VGA, or other video signals. Nevertheless, they are fully capable of charging devices,duplicating files, and can be seamlessly integrated with USB-C earphones, wireless network adapters, and SD card adapters.
- 【Easy to Use and Safe】Thanks to modern manufacturing techniques, we've made these adapters sufficiently compact so that they can remain inserted in your device without noticeable protrusion or inconvenience. This means you don't have to constantly plug and unplug them, reducing the likelihood of wear and misalignment, and making them more convenient to carry around.
- 【Reliable Quality】Engineered for enhanced durability, durable aluminum alloy shell material,get excellent wear resistance and heat dissipation,the male USB C and female USB connectors & the male USB and female USB C connectors are designed to be plugged and unplugged up to 20000 times. Provides data transfer, device charging, memory space expansion, and additional computer peripherals.
- 【Think more for you】Do you need to connect a USB-C-enabled device to an odd device that only has USB-A ports? Then these USB-A male to USB-C female adapters are made for you.Simply insert the adapter into the USB-A port on the device, and you can instantly connect your USB-C device to the device that originally didn't have the correct connection port.
- 【Trusted xiwxi Quality and Service】As a responsible brand seller, you will receive xiwxi's 12-month Quality assurance and lifetime friendly customer service, you're not just buying a product,you're investing in peace of mind with all-round quality and exceptional customer service.
Do leap smears affect elapsed-time measurements?
They can affect measurements made from wall-clock timestamps because the wall clock’s rate is intentionally changed during the smear. Measure elapsed time with a monotonic clock, and use UTC or an atomic-derived scale only when you need an externally meaningful timestamp. This separation also protects timeout and lease logic from any civil-time adjustment.
Will existing timestamps need to be rewritten after 2027?
There is no basis in the ITU press release alone for a blanket rewrite. Existing records retain the semantics of the source and policy that created them; the important task is to preserve that metadata and obtain the final CGPM implementation rules. New systems should record their time scale so historical direct-UTC and smeared values are not silently treated as identical.
Is PTP always unsmeared?
No. The behavior depends on the PTP profile, grandmaster and service configuration. AWS provides a documented example in which its PTP hardware clock follows UTC leap-second standards while its NTP service smears, so administrators must verify the actual path rather than infer behavior from the protocol name alone.
Frequently Asked Questions
Can a leap second be negative?
Yes, standards allow a negative leap second in principle, but none has occurred. It would omit a second from the normal sequence rather than creating a 23:59:60 label. Software should therefore avoid hard-coding only the positive case, even though positive handling is the scenario documented by most operational examples.
How can I tell whether an NTP source uses a smear?
Do not assume the packet format will tell you. Check the operator’s current documentation, configuration and leap policy, then compare the source with a known reference during a controlled observation window. NIST notes that time messages do not always identify how a server realizes a leap, so source metadata and provider documentation are essential.
Do leap smears affect elapsed-time measurements?
They can affect measurements made from wall-clock timestamps because the wall clock’s rate is intentionally changed during the smear. Measure elapsed time with a monotonic clock, and use UTC or an atomic-derived scale only when you need an externally meaningful timestamp. This separation also protects timeout and lease logic from any civil-time adjustment.
What’s actually slowing this PC down?
Pick the symptom - the matching free tool is one click away.
Will existing timestamps need to be rewritten after 2027?
There is no basis in the ITU press release alone for a blanket rewrite. Existing records retain the semantics of the source and policy that created them; the important task is to preserve that metadata and obtain the final CGPM implementation rules. New systems should record their time scale so historical direct-UTC and smeared values are not silently treated as identical.
Is PTP always unsmeared?
No. The behavior depends on the PTP profile, grandmaster and service configuration. AWS provides a documented example in which its PTP hardware clock follows UTC leap-second standards while its NTP service smears, so administrators must verify the actual path rather than infer behavior from the protocol name alone.

