Do these 3 things before closing this tab:
1Fix the driver behind crashes, sound loss and screen glitches2Repair Windows errors before they cause bigger problems3Scan for outdated or missing drivers - takes under a minuteSome links on this page are affiliate links: if you buy through them we may earn a commission, at no extra cost to you.
Choosing the right sharpening angle for any knife starts with the knife maker’s model-specific guidance. If you cannot find it—or the knife already cuts well—preserve its existing bevel by using the permanent-marker method before changing anything. On a symmetrical double-bevel knife, a smaller angle per side generally cuts more aggressively, while a larger angle produces a stronger edge that usually lasts longer. The correct choice also depends on whether the quoted number is per side or the inclusive total, the blade’s steel and geometry, and the work the knife performs.
The figures in sharpening charts are reference points, not a universal standard. Treat the manufacturer’s instructions as the highest-quality evidence, then identify the bevel already on your blade. Only after those checks should you choose a new profile.
As an Amazon Associate I earn from qualifying purchases.
The Tool Desk
Outbyte Driver Updater FREEScan for outdated or missing drivers - takes under a minuteDriver Scan →Outbyte PC Repair FREERepair Windows errors before they cause bigger problemsFix Now →What does a sharpening angle actually describe?
A sharpening angle describes the bevel face where the abrasive meets the blade. A knife with two symmetrical bevels has one angle on each side. If a source says 15 degrees per side, the two faces meet at a 30-degree inclusive edge angle. Doubling is valid only for a symmetrical, double-bevel edge.
Some knives are single-bevel, asymmetrical, or serrated. A single-bevel knife may have one primary bevel and a nearly flat back, so treating a quoted value as two equal sides would change the knife’s geometry. Always preserve the source’s convention in your notes and when setting a sharpener.
Popular on Amazon
- 【90 Degree Full Function USB C Adapter】Supports the latest USB4 standard for up to 40Gbps of bandwidth, 8K video support, and up to 240W Fast charging; Support USB PD 3.1 Extended Power Range (EPR) including 140W, 180W and 240W. Your productivity is easily doubled. *Warm Tip: For the best fit, please make sure the USB-C port is fully exposed; thick or bulky cases may affect compatibility.
- 【Reliable Quality】Made from high-quality, scratch-resistant aluminum alloy, delicate metal frame. get excellent wear resistance and heat dissipation. Non-Slip Design for easier insertion and removal.
- 【Small and portable】Ultra thin size, ultra compact design, a petite physique that matches the minimalist design of your modern laptops. Coming with a slim figure that won't block the port next to the one it's plugged into.
- 【Compatibility】Widely work with most usb c, thunderbolt 4/3 devices. Compatibilit for ROG Ally, Steam Deck, Switch, MacBook Pro, Quest 3 VR headset, Surface Book 2, iPhone 18/17/16/15, Samsung Galaxy S23/S22/S21, Note 20/10, Google Pixel, ChromeBook, etc.
- 【Excellence Customer Support】If you experience any issues or cable failure, simply reach out to our dedicated customer service team. We provide a prompt response within 18 hours, providing you with the necessary technical support to resolve any concerns.
Sharpening equipment can add another layer of confusion. A dial, guide, or pivot setting may describe the tool’s position rather than the angle actually applied to the blade. EdgePro’s instruction manual, for example, explains that its pivot setting can read higher than the angle reaching the edge when the blade rests on its face. Do not transfer a number from one device to another as though it were a universal blade angle.
What is the best sharpening angle for my knife?
The best angle is the one recommended for the exact model, reproduced accurately and matched to the knife’s work. If the maker’s instructions are unavailable, start by matching the existing bevel rather than imposing a generic chart value. Then adjust only when you have a clear reason, such as needing more edge strength for rough work or a more acute cutting edge for controlled slicing.
Tormek summarizes the central trade-off in its T-2 instructions: “In general, a small edge angle is better at cutting, while a larger edge angle is stronger and lasts longer.” The same instructions note that steel composition and intended use affect the appropriate angle. A thin, hard kitchen blade used for precise food preparation may justify a different profile from a thick outdoor knife that encounters tougher material.
Use this evidence hierarchy
- Exact current maker guidance: Look for the model’s care guide, sharpening instructions, or technical support information. A manufacturer can account for its blade thickness, steel, heat treatment, and intended use.
- The existing bevel: If the knife performs properly and no reliable specification is available, reproduce the bevel you can see rather than removing unnecessary steel.
- A category chart: Use generic values only as a starting point. Charts often disagree because they cover different designs or use different angle conventions.
There is no independently established statistical study in the supplied references that identifies one optimal angle for every knife. The numbers below are manufacturer or equipment recommendations, not universal experimental thresholds.
How do per-side and total edge angles convert?
For a symmetrical double-bevel knife, multiply the per-side value by two to obtain the inclusive angle. Divide an inclusive value by two to obtain each side. Write the unit beside every number so a 20-degree instruction cannot be mistaken for 20 degrees total.
| Source wording | What it means on a symmetrical double-bevel edge |
|---|---|
| 15° per side | 15° on each bevel; 30° inclusive |
| 30° total (inclusive) | 15° per side when both bevels are equal |
| 20° per side | 20° on each bevel; 40° inclusive |
| Single-bevel 15° | 15° on the specified bevel; do not automatically create a 15° bevel on the opposite face |
Tormek gives the practical example that a 15-degree setting produces a 30-degree total edge angle when both sides are sharpened symmetrically. A device’s displayed setting may still require verification against the blade, because the tool may measure from a different reference plane.
PC Slower Than It Used to Be?
A free scan shows the junk files, broken settings and background clutter dragging Windows down - then fixes them in one click.Free scan · Windows 10 & 11Outdated Drivers Are Slowing You Down
One free scan finds every outdated or missing driver and matches the right update for your exact hardware.Free scan · exact hardware matchAlso popular on Amazon
- 5-in-1 Connectivity: Equipped with a 4K HDMI port, a 5 Gbps USB-C data port, two 5 Gbps USB-A ports, and a USB C 100W PD-IN port. Note: The USB C 100W PD-IN port supports only charging and does not support data transfer devices such as headphones or speakers.
- Powerful Pass-Through Charging: Supports up to 85W pass-through charging so you can power up your laptop while you use the hub. Note: Pass-through charging requires a charger (not included). Note: To achieve full power for iPad, we recommend using a 45W wall charger.
- Transfer Files in Seconds: Move files to and from your laptop at speeds of up to 5 Gbps via the USB-C and USB-A data ports. Note: The USB C 5Gbps Data port does not support video output.
- HD Display: Connect to the HDMI port to stream or mirror content to an external monitor in resolutions of up to 4K@30Hz. Note: The USB-C ports do not support video output.
- What You Get: Anker 332 USB-C Hub (5-in-1), welcome guide, our worry-free 18-month warranty, and friendly customer service.
What angle ranges do common sharpening references give?
The following values are useful starting points only. They cannot be compared directly until you confirm whether each source means per side or total.
SHARPAL’s per-side examples
The SHARPAL Angle Pyramid manual labels these common settings as degrees per side:
| Knife category | Reference angle | How to interpret it |
|---|---|---|
| Pocket knife | 20° per side | 40° inclusive if symmetrical |
| Hunting knife | 25° per side | 50° inclusive if symmetrical |
| Fillet knife | 17° per side | 34° inclusive if symmetrical |
| Tactical knife | 25° per side | 50° inclusive if symmetrical |
| Euro/American kitchen knife | 20° per side | 40° inclusive if symmetrical |
| Asian kitchen knife | 14° or 17° per side | 28° or 34° inclusive if symmetrical |
These are category-level examples, not a claim that every knife in a category uses that profile. A particular Asian-style knife, for instance, may have a maker-specified bevel that differs from both listed values.
Morakniv’s total-angle examples
Morakniv’s sharpening guidance presents its ranges as total angles:
| Knife category | Reference total angle | Approximate per-side angle if symmetrical |
|---|---|---|
| Wood carving knife | 27° total | 13.5° per side |
| Fillet and vegetable knife | 25–30° total | 12.5–15° per side |
| Chef’s and kitchen knife | 30–40° total | 15–20° per side |
| Hunting and outdoor knife | 23–35° total | 11.5–17.5° per side |
| Butcher’s knife | 25–45° total | 12.5–22.5° per side |
For example, Morakniv’s 30–40-degree total range for a chef’s knife overlaps the general idea of a 15–20-degree-per-side edge, but the conventions must be converted before comparison. The ranges also span different uses, so they should not override a model-specific instruction.
A secondary Smith’s Abrasives reference
KnifeKits reproduces figures attributed to Smith’s Abrasives and labels them degrees per side: pocket knives 20°, hunting knives 22°, Euro/American kitchen knives 20°, Asian kitchen knives 16°, fillet knives 16°, and tactical knives 23°. Its brand examples list a Shun chef’s knife at 16° per side, a Wüsthof chef’s knife at 14° per side, and a Global chef’s knife at 17° per side. The KnifeKits reference is secondary material, so use it as a comparison point rather than as a substitute for current instructions from the knife maker.
Also popular on Amazon
- Sleek 7-in-1 USB-C Hub: Features an HDMI port, two USB-A 3.0 ports, and a USB-C data port, each providing 5Gbps transfer speeds. It also includes a USB-C PD input port for charging up to 100W and dual SD and TF card slots, all in a compact design.
- Flawless 4K@60Hz Video with HDMI: Delivers exceptional clarity and smoothness with its 4K@60Hz HDMI port, making it ideal for high-definition presentations and entertainment. (Note: Only the HDMI port supports video projection; the USB-C port is for data transfer only.)
- Double Up on Efficiency: The two USB-A 3.0 ports and a USB-C port support a fast 5Gbps data rate, significantly boosting your transfer speeds and improving productivity.
- Fast and Reliable 85W Charging: Offers high-capacity, speedy charging for laptops up to 85W, so you spend less time tethered to an outlet and more time being productive.
- What You Get: Anker USB-C Hub (7-in-1), welcome guide, 18-month warranty, and our friendly customer service.
How do I identify the bevel that is already on my knife?
The permanent-marker test lets you match the abrasive to the existing bevel before you remove significant metal. It is especially useful when a knife has no accessible specification or when a sharpening device’s angle scale does not correspond exactly to the blade.
- Make the knife safe. Clean and dry the blade, secure your sharpening surface, and follow the safety directions for the stone or machine. Keep fingers away from the abrasive path.
- Color the bevel. Use a permanent marker to cover the bevel on one side. Color only the bevel area so you can see where the first abrasive pass touches.
- Begin below the suspected bevel. Set the stone, guide, or pivot slightly lower than the angle you think the knife uses. This avoids immediately grinding behind the existing bevel.
- Make one light pass. Use minimal pressure and the motion specified by your sharpening system. The purpose is inspection, not edge removal.
- Inspect the ink. If the marker disappears across the bevel, your contact is aligned. If ink remains along one edge, the angle is off. Contact only at the shoulder or only at the apex means you need to adjust.
- Adjust in small increments. Change the guide or hand position and repeat a light pass until the abrasive contacts the existing bevel broadly and consistently. Check both sides on a double-bevel knife.
- Sharpen with the confirmed setting. Once the marker pattern shows the intended contact, continue using light, controlled passes and the tool manufacturer’s recommended sequence. Recheck the bevel if you change stones, guides, or blade position.
Morakniv and Tormek both describe versions of this marker approach. Tormek’s instructions emphasize light contact and inspecting the scratch pattern; EdgePro likewise recommends marking the edge and adjusting until the stone removes marker along most of the bevel.
Quick wins for a faster PC:
Clear out junk files and repair common Windows errorsFree Scan →Fix the driver behind crashes, sound loss and screen glitchesFind Drivers →Repair Windows errors before they cause bigger problemsFix Now →How should I choose between a sharper and a stronger edge?
Choose a more acute angle when low cutting resistance is the priority and the blade can support that geometry. Choose a more obtuse angle when edge strength, impact resistance, or longer service between sharpenings matters more. The decision is a trade-off, not a ranking in which one angle is always superior.
| Priority | Direction to consider | What to watch for |
|---|---|---|
| Fine slicing and low cutting resistance | Smaller per-side angle | A thin edge can be less tolerant of impacts or hard contact |
| Durability and rougher work | Larger per-side angle | Cutting may feel less effortless |
| Existing knife performs well | Keep the current bevel | Changing the profile removes more steel than routine maintenance |
| Uncertain steel or construction | Follow the maker or use the existing bevel | Generic category numbers may not suit the heat treatment or thickness |
Steel composition is one of the reasons two knives in the same category can need different angles. Intended work matters too: a knife used for controlled food preparation does not experience the same stresses as one used outdoors or for heavy cutting.
What changes for single-bevel, asymmetric, and serrated knives?
Single-bevel and asymmetric knives require the maker’s instructions because their geometry is intentionally unequal. Do not double a single-bevel recommendation, and do not automatically divide a total angle between two sides that were never designed to be symmetrical.
- Single bevel: Sharpen the specified bevel and maintain the back according to the maker’s method. A flat or nearly flat back is not equivalent to a second matching bevel.
- Asymmetric double bevel: Keep track of the angle on each side separately. A 70/30 or similar edge should not be converted into two equal settings merely because the knife has two bevel faces.
- Serrated edge: The teeth have individual bevels and require a method appropriate to their shape. A broad flat stone used as though the edge were plain can alter the teeth rather than reproduce them.
If the manual gives one number without saying “per side” or “total,” pause before sharpening. Contact the maker or locate a diagram that identifies the reference; guessing can permanently change a specialized edge.
Free tools Windows power users keep installed
One-click scans. No signup required.
Also popular on Amazon
- Portable and powerful USB-C HUB: BENFEI USB Type-C HUB, with super-soft and knot-free silicone woven design cable, meets most mobile office needs. Compact, lightweight, stylish, and powerful portable USB C Hub equipped with 1 x HDMI port, 1 x 100W charging, and 3 x USB ports. 18-month warranty, 24-hour response, to ensure you feel at ease when using our product.
- Design centered on comfort and reliability: Thanks to BENFEI's end-to-end in-house cable production capability, in-house PCBA and assembly capability, using the industry's most advanced silicone woven design and process, 20cm cable in length, no knots, super-soft, the HUB is easy to use in all scenarios: laptop, tablet, stand etc. Super-soft, 25000+ life cycles, to meet your daily carrying and office needs.
- 100W Charging: Support up to 90W USB C pass-through charging via Type-C port to keep your laptop powered. 10W is reserved for other interface operations. No data and video function on the Type-C port.
- 4K HDMI Display: The HDMI port supports media display at resolutions up to 4K 30Hz, keeping every incredible moment detailed and ultra vivid. Please note that the C port of the Host device needs to support video output.
- Transfer Files in Seconds: Transfer files and from your laptop at speeds up to 10 Gbps with USB A 3.2 port. Extra 2 USB A 2.0 ports are perfectly for your keyboards and mouse.
Can an angle guide make sharpening more repeatable?
Yes. A guide can help you hold a repeatable starting angle, particularly while learning freehand technique, but it does not prove that the setting equals the blade angle. SHARPAL’s Angle Pyramid manual documents preset positions of 14°, 17°, 20°, and 25° for use with its diamond whetstone. Those presets are best treated as aids: confirm the knife’s maker guidance and use the marker test to verify contact.
Guides also interact with blade width, spine thickness, clamping position, and the sharpening system’s reference plane. If you move the blade or change equipment, repeat the marker check. The same displayed number can produce a different bevel on a different setup.
What common mistakes make an angle recommendation fail?
- Mixing conventions: Applying 20° total when a chart meant 20° per side creates a much more acute edge than intended. Write “per side” or “total” beside every setting.
- Trusting a category before the model: A “kitchen knife” label does not identify its steel, thickness, or bevel design. Search for the exact model first.
- Setting the sharpener by its dial alone: Device readings can use different reference planes. Verify with marker contact on the actual blade.
- Using heavy pressure during the marker test: A forceful pass can remove ink and metal beyond the intended area, hiding the angle error. Start lightly.
- Reprofiling a knife that already works: A new angle can require extensive grinding. Preserve a functional bevel unless the cutting task or damage justifies a change.
- Assuming both sides are equal: Single-bevel and asymmetric edges need separate treatment. Inspect each face and follow the knife’s own instructions.
- Comparing numbers without their source: A manufacturer’s current model guidance carries more weight than an old secondary chart. Keep the attribution and scope with the number.
What is a practical decision process when recommendations conflict?
Use this sequence whenever two charts or tools suggest different numbers:
- Identify the geometry. Confirm whether the edge is plain, serrated, double-bevel, single-bevel, or asymmetric.
- Label every recommendation. Mark each value as per side, total, one-sided, or device-specific.
- Find the exact model guidance. Prefer a current manual or maker support document over a generic category table.
- Inspect the present bevel. Use marker and light passes to see whether the knife already matches a workable profile.
- Match the work and steel. Favor cutting efficiency for controlled slicing; favor strength and longevity for impact-prone or rough use, while accounting for the steel’s stated characteristics.
- Choose the least disruptive change. If there is no clear benefit to reprofiling, maintain the existing bevel. If you do change it, record the new per-side or total value for future sharpening.
This process explains why two reputable charts can both be useful without either being universally correct: they may describe different angle conventions, knife geometries, or intended uses.
Recommended Free Tools
How do I record the angle for future maintenance?
Write down the knife model, edge type, sharpening tool, guide setting, and whether the number is per side or total. Note any asymmetry and the stone or abrasive used. A short label such as “15° per side, double bevel, guide verified by marker” is more useful than “30° knife angle,” which could be interpreted in two ways.
After sharpening, keep the same reference method. If the edge becomes damaged or you switch systems, repeat the marker test rather than assuming the old device setting transfers exactly. Consistent documentation helps you reproduce a proven bevel without relying on memory or a generic chart.
Also popular on Amazon
- 【Read before You Buy】 Note: This adapter is USB 2.0 version and cannot transmit HDM, VGA, or other video signals. Nevertheless, they are fully capable of charging devices,duplicating files, and can be seamlessly integrated with USB-C earphones, wireless network adapters, and SD card adapters.
- 【Easy to Use and Safe】Thanks to modern manufacturing techniques, we've made these adapters sufficiently compact so that they can remain inserted in your device without noticeable protrusion or inconvenience. This means you don't have to constantly plug and unplug them, reducing the likelihood of wear and misalignment, and making them more convenient to carry around.
- 【Reliable Quality】Engineered for enhanced durability, durable aluminum alloy shell material,get excellent wear resistance and heat dissipation,the male USB C and female USB connectors & the male USB and female USB C connectors are designed to be plugged and unplugged up to 20000 times. Provides data transfer, device charging, memory space expansion, and additional computer peripherals.
- 【Think more for you】Do you need to connect a USB-C-enabled device to an odd device that only has USB-A ports? Then these USB-A male to USB-C female adapters are made for you.Simply insert the adapter into the USB-A port on the device, and you can instantly connect your USB-C device to the device that originally didn't have the correct connection port.
- 【Trusted xiwxi Quality and Service】As a responsible brand seller, you will receive xiwxi's 12-month Quality assurance and lifetime friendly customer service, you're not just buying a product,you're investing in peace of mind with all-round quality and exceptional customer service.
How we interpret the published angle guidance
The recommendations above are organized by evidence quality and angle convention. Current model-specific maker guidance comes first; the existing bevel is the next-best practical reference; category charts from SHARPAL, Morakniv, and the Smith’s-attributed KnifeKits page are included only as clearly labeled examples. The selection criteria are geometry, per-side versus total notation, steel and intended use, and whether the source explains how its number is measured.
Frequently Asked Questions
What should I do if a knife listing gives an angle but no units?
Do not assume the number is per side. Look for a diagram or care manual that identifies the reference, and ask the maker before sharpening; a single ambiguous number can represent a bevel face, an inclusive edge, or a device setting.
Can I use the same angle on a knife made from a different steel?
Not automatically. Steel composition and heat treatment influence how much edge strength is needed, so retain the existing bevel or follow the second knife’s own maker guidance instead of copying a setting solely because the blade shape looks similar.
How can I tell whether my two bevels are actually symmetrical?
Color and test one side at a time, then compare where the abrasive removes marker on each face. If the contact widths or shoulders differ, treat the edge as asymmetric and preserve each side’s geometry rather than averaging the readings.
Does a sharper angle always make a knife better?
No. A more acute edge can improve cutting feel but may be less tolerant of impacts or demanding work. The appropriate choice depends on the balance between cutting performance, edge strength, steel, and the tasks the knife performs.

