DriversRecommendedOutdated drivers can make a good PC feel brokenScan driver issues before chasing fixes manually.Scan NowThanksgiving DealsAmazon USThanksgiving week: Black Friday picks start earlyAmazon US: current deals, useful picks and tech finds.Check DealsClean PCRecommendedOne scan can reveal what keeps slowing WindowsLook for cleanup and repair opportunities.Run Scan×
FREEDOM251

Freedom251 › Blog

How to Connect the Pokémon Edition Beats Pill to iPhone or Android

By Freedom251 Team · · 10 min read

Special offer. See more information about Outbyte and uninstall instructions. Please review EULA and Privacy policy.

Some links on this page are affiliate links: if you buy through them we may earn a commission, at no extra cost to you.

To pair the Beats Pokémon Pill speaker, turn it on, make sure its status light is pulsing, then choose Beats Pill in your phone’s Bluetooth settings. On iPhone, use Settings > Bluetooth. On Android, use the phone’s Bluetooth menu and tap Pair if asked; an Android Fast Pair animation may also appear. If the light is not pulsing, hold the Pill’s power button for three seconds to put it into discovery mode.

The Pokémon Edition is the Beats Pill – Pokémon Special Edition, a Bluetooth speaker designed to work with both iOS and Android. The steps below cover the official manual method, Android Fast Pair, confirmation cues and the safest fixes when the speaker does not appear.

As an Amazon Associate I earn from qualifying purchases.

Special offer. See more information about Outbyte and uninstall instructions. Please review EULA and Privacy policy.

What exactly are you pairing?

The device in this guide is the Beats Pill – Pokémon Special Edition. It is a portable Bluetooth speaker, not a separate Pokémon-specific phone accessory or a speaker that requires an Apple-only connection. Apple lists the model as compatible with both iOS and Android, so an iPhone and an Android phone use the same basic Bluetooth process: put the Pill into discovery mode and select it from the phone’s available devices.

Beats describes this cross-platform behavior as “dual compatibility for both iOS and Android” with one-touch Bluetooth pairing in its official Beats Pill support information. The appearance of the casing does not change the pairing menu: the device name you look for is Beats Pill.

Popular on Amazon
Yojaro 4Pack Silicone Suction Phone Case Mount, Silicon Adhesive Smartphones Stand Sticky, Hands-Free Phone Accessories Holder for Selfies and Videos (Black & White & Translucent & Light Pink)
  • 【Strong Adsorption】The inspiration of the silicone phone suction case comes from the adhesive force of the octopus. Each suction cup phone mount is 3.15 inches long and 2.17 inches wide, with 24 independent suction cups providing a stronger and more stable suction force, so you don't have to worry about your phone falling during use.
  • 【Back of Phone Suction Grip】Remove the adhesive film on the phone suction cup and stick it on the phone case. You can then fix the phone on any smooth surface, which is very convenient. (The phone suction cup cannot be removed and reused after being attached to the phone case. It is recommended to attach it to a regular phone case, not a valuable one.)
  • 【Widely Used】Our non-slip silicone phone sticky grip mount attaches to almost any flat phone case and make it compatible with common mobile phones such as iPhone and Android.You can shoot, watch videos or video calls in the kitchen, gym, dance studio, bathroom and other places.
  • 【Capture the Wonderful Picture】Whether you are a TikTok creator or just like to share videos and photos, this phone suction cup can help you hands-free capture wonderful videos and photos for sharing with friends.
  • 【Note】You can fix the phone suction cup on a smooth surface such as a mirror or glass. If necessary, wipe the suction cup with a damp cloth to obtain stronger suction. Before releasing your hand, make sure the phone is firmly fixed. (Not applicable to rough walls, wooden surfaces, and other uneven surfaces)

What do I need before pairing?

You need a charged Beats Pill, the phone you want to use, and Bluetooth switched on. Apple’s setup instructions put charging first because a speaker with too little power may not remain available long enough to complete discovery. Keep the Pill close to the phone, and leave the phone unlocked if you are expecting a one-touch or Fast Pair prompt.

  • Charge the speaker: Apple lists a USB-C cable in the box. The power adapter is sold separately, but an adapter is not a special pairing requirement; the important point is that the Pill has power.
  • Use a nearby phone: Beats’ one-touch guidance calls for the speaker to be near an unlocked device.
  • Turn on Bluetooth: Bluetooth must be enabled in the phone’s settings before the speaker can appear.
  • Know the light’s role: a pulsing light indicates discovery mode. If the Pill is on but the light is not pulsing, use the three-second power-button action described below.

The exact labels around Bluetooth can vary on Android phones, but the requirement is the same. You do not need a separate cable, account or accessory to pair over Bluetooth.

Free tools Windows power users keep installed

One-click scans. No signup required.

Special offer. See more information about Outbyte and uninstall instructions. Please review EULA and Privacy policy.

How do I pair the Beats Pokémon Pill with an iPhone?

On an iPhone, manual Bluetooth pairing is the direct route. Turn on the Pill, put it in discovery mode, then select it under Settings > Bluetooth.

  1. Turn on the Pill. Press its power button. Look at the light next to the button.
  2. Check discovery mode. The light should pulse. If it does not, press and hold the power button for three seconds. This is Apple’s stated way to enter discovery mode when the light is not already pulsing.
  3. Open Bluetooth settings on the iPhone. Go to Settings > Bluetooth and make sure the Bluetooth switch is on.
  4. Wait for the device list. Keep the speaker close to the unlocked iPhone while the list of available devices refreshes.
  5. Select the speaker. Tap Beats Pill in the list. The iPhone uses that selection to complete the Bluetooth connection.

Apple’s “Set up and use your Beats Pill speaker” guide uses this manual Settings path. If the speaker does not appear, do not keep tapping an old entry or assume the Pokémon branding creates a different name. Return to the Pill, confirm the pulsing light, and try the device list again.

How do I pair the Beats Pokémon Pill with an Android phone?

Android has two possible experiences. The universal method is manual Bluetooth pairing: open Bluetooth settings, select Beats Pill and tap Pair if Android asks for confirmation. Some Android phones also show a Fast Pair setup animation when the nearby speaker is ready.

Also popular on Amazon
Apple EarPods Headphones with USB-C Plug, Wired Ear Buds with Built-in Remote to Control Music, Phone Calls, and Volume
  • SUPERIOR COMFORT — Unlike traditional circular ear buds, the design of EarPods is defined by the geometry of the ear. Which makes them more comfortable for more people than any other ear bud–style headphones.
  • HIGH-QUALITY AUDIO — The speakers inside EarPods have been engineered to maximize sound output and minimize sound loss, which means you get high-quality audio.
  • BUILT-IN REMOTE — EarPods with USB-C plug also include a built-in remote that lets you adjust the volume, control the playback of music and video, and answer or end calls with a pinch of the cord.
  • COMPATIBILITY — Works with all devices that have a USB-C port.
  • INTEGRATED MICROPHONE — A built-in microphone precisely captures your voice while you’re on the phone, taking a FaceTime call, or summoning Siri — so you’re always heard loud and clear.

Manual Android pairing

  1. Power on the speaker. Press the Pill’s power button.
  2. Put it in discovery mode. Confirm that the light is pulsing. If it is not, hold the power button for three seconds.
  3. Open Bluetooth on Android. Go to your phone’s Bluetooth settings and switch Bluetooth on. Android manufacturers may place this page in different menus, so use the phone’s own Bluetooth settings rather than looking for one universal sequence of labels.
  4. Choose the Pill. Select Beats Pill from the available-device list.
  5. Approve the request. Tap Pair if the phone displays a pairing confirmation.

The Android menu wording and layout are not identical across phones. What must remain consistent is the action: Bluetooth on, Pill in discovery mode, then the Pill selected from the available devices. Apple documents this manual fallback in its current Beats pairing guide.

Special offer. See more information about Outbyte and uninstall instructions. Please review EULA and Privacy policy.

Android Fast Pair

  1. Turn on Bluetooth on the Android phone.
  2. Turn on the Pill and hold it near the phone. Keep the phone unlocked while waiting for a prompt.
  3. If a Fast Pair setup animation appears, follow the onscreen instructions.
  4. If no animation appears, use the manual Bluetooth method above. Fast Pair is an optional convenience, not the only way to connect.

Apple’s Android guidance also lists the Beats app’s Connect Your Beats flow as another option. You can use the app route when it is offered, but ordinary manual Bluetooth pairing remains available if the animation or app prompt does not appear.

The same guide notes that an Android device needs Wi-Fi or cellular connectivity for potential Find Hub features. That statement is separate from the basic manual Bluetooth steps: the pairing instructions themselves direct you to Bluetooth settings, while connectivity may be needed for additional device-finding functionality.

How can I tell whether pairing worked?

The clearest practical sign is that Beats Pill is selected or shown as connected in the phone’s Bluetooth settings. Once the phone identifies the Pill as the connected audio device, start playback from an app to route sound to the speaker.

Beats describes additional cues for its one-touch process: the LED blinks white and the Pill gives an audio cue while pairing; a second audio cue indicates that the device is connected and ready to play. These cues belong to Beats’ one-touch pairing description, while Apple’s manual setup path uses selection in the Bluetooth list as the practical confirmation.

Special offer. See more information about Outbyte and uninstall instructions. Please review EULA and Privacy policy.
Also popular on Amazon
PopSockets Adhesive Phone Grip, Holder- Black | Anti-Drop, Kickstand, Secure Comfortable Hold, Black, Create a Mobile Phone Outfit
  • Secure Hold: Our PopSockets adhesive phone grip gives your cell phone a secure, comfortable hold in hand to help prevent drops while texting, taking photos, or scrolling on the go. Designed to stick firmly to most phone cases and devices.
  • Hands-Free Made Easy: Easily turn your PopSocket into a phone stand to prop up your phone anywhere, perfect for watching videos, video calls, or following recipes. A must-have phone holder that keeps your device secure and ready for anything.
  • Compatibility: Works with all phones, tablets, and Kindles. Sticks best to smooth, hard plastic cases and may not adhere to silicone or textured cases. Easily swap your PopTop to change up your style.
  • Black PopSockets: Simple, refined, and endlessly versatile. A timeless essential for any phone.
  • Travel Must-Have for People On the Go: A must-have travel accessory for flights, flying, airports, air travel, airplanes, planes, international trips, cruises, and long travel days. Key gadget for your airport haul, travel accessories and must-haves.

If you hear the connection cue but music still comes from the phone, check the phone’s current audio output control and select the connected Beats Pill. The official setup material does not promise identical audio-output controls on every Android model, so the control’s location can differ by phone.

What should I do if Beats Pill does not appear?

Start with the small set of checks that the official setup pages actually support. Most discovery problems are addressed by restoring power, Bluetooth and discovery mode before trying the list again.

  1. Check charge and power. Make sure the Pill has been charged, then press its power button. A speaker that is not powered cannot advertise itself for pairing.
  2. Look at the light. If the light is not pulsing, hold the power button for three seconds to enter discovery mode. Wait for the pulsing indication before searching on the phone.
  3. Verify Bluetooth on the phone. Open the phone’s Bluetooth settings and confirm that Bluetooth is on. Do not rely only on a shortcut icon whose state may be unclear.
  4. Move the devices close together. Beats’ one-touch instructions call for a nearby speaker and an unlocked device. Keep the Pill beside the phone while the available-device list refreshes.
  5. Use the manual route on Android. If Fast Pair does not show an animation, open Bluetooth settings, select Beats Pill and approve the Pair request when shown.
  6. Refresh the search after correcting the condition. Once the Pill is charged, pulsing and nearby, return to the phone’s available-device list and look for Beats Pill again.

These steps are deliberately conservative. The cited Apple and Beats pages explain charging, discovery mode, proximity and manual selection, but they do not provide a universal troubleshooting tree for every Android version or a verified reset procedure for every failure. Avoid treating an unverified reset button combination as a standard fix, and do not assume that every phone will show the same prompt.

What is different between iPhone and Android pairing?

The essential Bluetooth action is the same on both platforms. The differences are the phone menu and the optional Android prompt.

Special offer. See more information about Outbyte and uninstall instructions. Please review EULA and Privacy policy.
Part of the process iPhone Android
Phone path Settings > Bluetooth Open the phone’s Bluetooth settings; labels and menu locations vary
Speaker preparation Turn on the Pill and confirm a pulsing light Turn on the Pill and confirm a pulsing light
If the light is not pulsing Hold the power button for three seconds Hold the power button for three seconds
Device name Beats Pill Beats Pill
Extra setup option Manual Bluetooth selection is the documented path Fast Pair animation may appear; manual Bluetooth is the fallback
App option Not required by the documented manual steps Apple lists the Beats app’s Connect Your Beats flow as an option

Android’s extra Fast Pair animation does not make it a different speaker or a different Bluetooth standard. It is simply an additional setup interface that may or may not appear on a particular phone. If it does not appear, the manual list is the supported alternative.

Also popular on Amazon
Sale
360° Rotating Stainless Steel Phone Tether Tab (Silvery 3-Pack) - Universal for iPhone & Other Phones (Fits Wristbands/Necklaces/Crossbody Straps)
  • [360 ° Flexible Rotation Design] Comes with a rotatable lanyard ring that supports 360 ° free rotation, effectively solving the problem of twisted and tangled lanyards
  • [Wide compatibility] The ultra-thin 0.02-inch design does not block the charging port at all, and both wired and wireless charging can be used directly without removing the pad. Compatible with most smartphones such as iPhone, compatible with various wristbands, lanyards, crossbody straps, and keychains
  • [Durable and Portable Material] Premium rust-resistant stainless steel material with good flexibility, which not only avoids scratching the phone case, but also has excellent anti rust and anti fading performance
  • [Multi scenario Practical] Paired with a lanyard or wristband, hands-free use can be achieved. The phone is within reach and not easily dropped, ideal for daily commuting and outdoor activities. Suitable for full coverage phone cases, does not support half coverage phone cases
  • [Quality Service] If you find any damage or other issues with the product upon receipt, please contact us immediately. We will handle it quickly

Do I need the Beats app to connect?

No. The documented iPhone process uses the phone’s Bluetooth settings, and the documented Android fallback also uses Bluetooth settings. On Android, Apple lists the Beats app’s Connect Your Beats flow as an option, not as a prerequisite for ordinary Bluetooth pairing.

If you choose the app route, keep the phone near the unlocked speaker and follow the app’s displayed instructions. If the app or Fast Pair prompt is unavailable, selecting Beats Pill manually is still the direct way to establish the connection.

Does the Pokémon Edition require a special accessory?

No special accessory is needed for Bluetooth pairing. Apple lists a USB-C cable with the speaker and says the power adapter is sold separately, but pairing instructions begin with a charged Pill and Bluetooth-enabled phone rather than a particular charger.

What’s actually slowing this PC down?

Pick the symptom - the matching free tool is one click away.

Special offer. See more information about Outbyte and uninstall instructions. Please review EULA and Privacy policy.

In practical terms, charge the speaker with the supplied cable and a compatible power source, then disconnect or leave it charging while you pair. The cable’s presence in the box does not alter the wireless pairing steps.

Independent reader supportYour contribution helps us test, update, and keep practical guides available for everyone.Support on Ko-Fi

What should I avoid assuming about Android menus?

Do not assume every Android phone uses the same menu names, shortcut layout or confirmation wording. The reliable instruction is to open the phone’s Bluetooth settings, enable Bluetooth and select Beats Pill. Manufacturer-specific paths can change, while that underlying action remains the same.

Also popular on Amazon
Anteel Double Sided - 2 Pack Silicone Suction Phone Case Mount,2.55"x3.94" | Hands-Free Non Slip Phone Grip, More Suction Cups, Stronger Suction Power, Selfies and Videos, Light Pink&White
  • 【PKYAA Double Sided Silicone Suction Phone Case Mount】PKYAA With Double Sided 40 Strong and Reliable individual suction cups, PKYAA provides a thicken and upgraded universal silicon suction mount for your phone.
  • 【Friendly to Content Creators】If you are a content creator or an online influencer, you can create videos anywhere with this suction mount completely hands free with this silicone cell phone mount for cases.
  • 【HANDS-FREE & Adhere to Mirrors】This Double Sided silicone suction phone case mount allows you to stick your phone to the mirror easily. No longer holding your phone in one hand to watch video tutorials while making up.
  • 【Strong Grip on the Smooth Surface】You can easily hang your phone anywhere with a smooth surface. All you do is you clean off your phone and smooth surface. It is STURDY and it not only sticks to mirrors, it also sticks to windows, it sticks to refrigerators, tiles and other clean, flat surfaces.
  • 【Press Down Firmly Every 30 Minutes】Use your palm or fingers to press the phone down firmly and check it's secure before letting go. Apply even pressure for a few seconds to allow the suction cup to adhere properly. To maintain the grip and prevent accidental falls, it's a good practice to periodically reapply pressure to the suction cup.

Likewise, do not interpret the absence of a Fast Pair animation as proof that the speaker is incompatible. Apple’s pairing guidance explicitly presents manual Bluetooth pairing as the fallback. Check discovery mode and use the available-device list instead.

Can I pair first and troubleshoot audio later?

Yes. Separate the problem into two questions: whether the phone has connected to the Pill, and whether the phone is routing playback to it. A selected or connected Beats Pill entry confirms the Bluetooth connection; audio-output controls then determine where a particular app sends sound.

Special offer. See more information about Outbyte and uninstall instructions. Please review EULA and Privacy policy.

This distinction prevents you from repeating the pairing process when the actual issue is output selection. If the Pill is not listed at all, return to charge, pulsing light, Bluetooth and proximity checks. If it is listed as connected, investigate the phone’s audio-output selector rather than treating it as a discovery failure.

Official references for the setup

Frequently Asked Questions

Does an Android phone need internet access for basic Beats Pill Bluetooth pairing?

The manual pairing path uses the phone’s Bluetooth settings and does not list internet access as a prerequisite. Apple separately notes Wi‑Fi or cellular connectivity for potential Find Hub features, so online access may be needed for those additional features rather than for the basic Bluetooth connection.

Why is the Pill connected but not playing sound?

A Bluetooth connection and an app’s selected audio output are separate controls. If the phone shows Beats Pill as connected, use the phone’s audio-output selector to direct playback to the speaker instead of repeating discovery steps.

Can I use Fast Pair if its popup never appears?

Fast Pair is an optional Android setup animation, not a requirement. Open Bluetooth settings, make sure the Pill’s light is pulsing, select Beats Pill and approve the Pair request if Android displays one.

Special offer. See more information about Outbyte and uninstall instructions. Please review EULA and Privacy policy.

What name should I look for in the phone’s device list?

The official manual instructions identify the speaker as Beats Pill. The Pokémon Edition’s artwork does not require a different Bluetooth name.

The Bottom Line

Charge and turn on the Pokémon Edition Beats Pill, make its light pulse by holding the power button for three seconds if necessary, then select Beats Pill in your iPhone or Android Bluetooth settings. Android may offer Fast Pair, but manual Bluetooth pairing works as the fallback.

Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon at the time of purchase will apply. Prices as of November 22, 2026 6:40 am GMT+0530.

Leave a Reply

Your email address will not be published. Required fields are marked *

Special offer. See more information about Outbyte and uninstall instructions. Please review EULA and Privacy policy.

Recommended PC Tool
Recommended PC Tool
PC Slower Than It Used to Be?Free scan - under a minute
Crashes, No Sound, or Screen Glitches?Free driver scan

Two free Windows tools

One Free Minute Could Fix That PC

Before you go - each of these free tools takes about a minute and tackles what quietly slows a Windows PC down.

Special offer. View Outbyte info, uninstall instructions, EULA, and Privacy Policy.