What’s actually slowing this PC down?
Pick the symptom - the matching free tool is one click away.
Some links on this page are affiliate links: if you buy through them we may earn a commission, at no extra cost to you.
Choosing a jet turbine for an RC aircraft starts with the airframe—not with the biggest thrust number you can afford. The correct engine is one that the airframe maker permits, that fits the mount and tailpipe, keeps the model within its mass, balance and speed limits, and can be integrated with the required ECU, fuel system, batteries and failsafe controls. Compare several candidates across all of those dimensions, then confirm the installation with the airframe and turbine manufacturers before buying.
At a glance
| Name | Best for | Key spec | Platforms | Checked |
|---|---|---|---|---|
| JetCat P250-PRO-S | Manufacturer example for an approved RC aircraft or drone installation; not a universal recommendation | 250 N maximum thrust; 11.8 N idle thrust; 2,155 g; 121 mm diameter × 322 mm length; 820 ml/min full-load consumption; 138 ml/min idle consumption | RC aircraft or drones | November 2026 |
The figures in this table are the manufacturer’s listed specifications. Confirm the current product status, manual, configuration and included accessories before using them for a purchase decision.
As an Amazon Associate I earn from qualifying purchases.
The Tool Desk
Outbyte PC Repair FREEClear out junk files and repair common Windows errorsFree Scan →Outbyte Driver Updater FREEScan for outdated or missing drivers - takes under a minuteDriver Scan →What should you check first when choosing an RC turbine?
Check the aircraft manufacturer’s approved turbine range and installation instructions before comparing engines. A turbine that produces enough thrust can still be unsuitable if its diameter, length, exhaust arrangement, mounting points, heat shielding, fuel flow or speed capability exceeds the airframe’s limits.
- Approved engine range: Look for a model number or thrust class explicitly listed by the airframe maker. “Fits similar jets” is not a substitute for an approved range.
- Mounting method: Confirm the clamp, rails, brackets, bolt pattern and load-bearing structure. Ask whether the mount is supplied with the airframe or turbine and whether an adapter is required.
- Tailpipe and exhaust: Check the permitted tailpipe diameter, length, alignment, insulation and clearance from wood, composite laminates, wiring, servos and fuel tanks.
- Operating limits: Find the aircraft’s maximum speed, structural limits, approved turbine power and any restrictions on fuel, flight profile or landing weight.
- Balance and equipment locations: Verify where the engine, batteries, ECU, pump and tanks may be placed while maintaining the specified center of gravity.
If the manual is unclear, send the airframe maker a dimensioned drawing or photographs of the proposed installation. A turbine specialist or the engine manufacturer can resolve questions about control interfaces and fuel plumbing, but only the airframe maker can approve the model’s structure and flight envelope.
Popular on Amazon
- 【90 Degree Full Function USB C Adapter】Supports the latest USB4 standard for up to 40Gbps of bandwidth, 8K video support, and up to 240W Fast charging; Support USB PD 3.1 Extended Power Range (EPR) including 140W, 180W and 240W. Your productivity is easily doubled. *Warm Tip: For the best fit, please make sure the USB-C port is fully exposed; thick or bulky cases may affect compatibility.
- 【Reliable Quality】Made from high-quality, scratch-resistant aluminum alloy, delicate metal frame. get excellent wear resistance and heat dissipation. Non-Slip Design for easier insertion and removal.
- 【Small and portable】Ultra thin size, ultra compact design, a petite physique that matches the minimalist design of your modern laptops. Coming with a slim figure that won't block the port next to the one it's plugged into.
- 【Compatibility】Widely work with most usb c, thunderbolt 4/3 devices. Compatibilit for ROG Ally, Steam Deck, Switch, MacBook Pro, Quest 3 VR headset, Surface Book 2, iPhone 18/17/16/15, Samsung Galaxy S23/S22/S21, Note 20/10, Google Pixel, ChromeBook, etc.
- 【Excellence Customer Support】If you experience any issues or cable failure, simply reach out to our dedicated customer service team. We provide a prompt response within 18 hours, providing you with the necessary technical support to resolve any concerns.
How much thrust does an RC jet need?
Use the airframe maker’s recommended thrust range and all-up weight as the starting point. Static thrust alone does not establish suitability: installed thrust changes with the intake, tailpipe, fuel state and temperature, while excess thrust can drive the aircraft beyond its approved speed or structural limits.
Compare at least four thrust-related values:
- Maximum thrust: Useful for acceleration and climb, but normally available only at high throttle and with the specified fuel and operating conditions.
- Idle thrust: Important for approach behavior, braking on the ground and whether the aircraft can slow on a level runway. A high idle value may require more deliberate energy management.
- Installed thrust: The thrust after the airframe’s intake, tailpipe and accessories are fitted. Use the manufacturer’s installed guidance where available rather than assuming the catalog figure.
- Thrust relative to mass: Include the engine, mount, ECU, pump, batteries, valves, tanks, fuel and tailpipe in the aircraft’s all-up mass. Comparing thrust with the bare airframe weight gives a misleading result.
Do not select a larger turbine simply to create a generous margin. The evoJet manual warns that real-jet exhaust speed can produce airspeeds above an airframe’s approved range, creating flutter or structural and control overload. The safe choice is the turbine that meets the aircraft’s takeoff, climb and landing requirements while remaining inside its speed and load limits.
Do these 3 things before closing this tab:
1Scan for outdated or missing drivers - takes under a minute2Clear out junk files and repair common Windows errors3Fix the driver behind crashes, sound loss and screen glitchesWhich turbine specifications should you compare?
Build a side-by-side sheet for every candidate. The useful comparison is a complete propulsion system, not a thrust number copied from a product page.
| Specification | Why it matters | What to verify |
|---|---|---|
| Maximum and idle thrust | Determines acceleration, climb and low-throttle handling | Units (N or lb), test conditions, and whether the figure is installed or laboratory thrust |
| Engine mass | Changes wing loading, center of gravity and landing speed | Whether the listed mass includes starter, pump, ECU, clamp, valves or other accessories |
| Diameter and length | Controls physical fit and tailpipe geometry | External dimensions, mounting clearance, inlet clearance and service access |
| Fuel consumption | Sets tank size, endurance and fuel-related mass | Full-load and idle rates, units, fuel type and test conditions |
| Fuel and oil requirements | Affects plumbing, storage and reliability | Approved fuels, oil ratio or premix requirement, filtration and line size |
| Electrical demand | Determines battery capacity, wiring and voltage compatibility | Starter current, pump draw, ECU voltage range, connector type and battery separation |
| ECU and receiver interfaces | Controls throttle, telemetry and failsafe shutdown | Signal type, channel setup, telemetry bus, remote shutdown input and programming requirements |
| Included equipment | Prevents budget and installation surprises | Starter, pump, solenoids, mounting clamp, interface, sensors, wiring, ground terminal and manual |
| Service and support | Determines how faults, inspections and overhauls are handled | Authorized service location, parts availability, documentation and support in your country |
What does a real turbine specification sheet look like?
JetCat’s P250-PRO-S illustrates why several axes must be considered together. Its product page lists 250 N maximum thrust, 11.8 N idle thrust, a 2,155 g mass, a 121 mm diameter, a 322 mm length, 820 ml/min full-load fuel consumption and 138 ml/min idle consumption. The listed RC set includes a turbine mounting clamp, PRO interface, JetNet and a remote GSU. JetCat also describes an ECU, brushless starter and fuel pump, fuel solenoids, automatic cool-down, fuel-use reporting and a safety-shutdown input in the system.
Those numbers do not prove that the P250-PRO-S fits a particular model. The 121 mm diameter may be too large for an engine bay, the 2,155 g engine mass may move the center of gravity, and 820 ml/min at full load may require a tank that the aircraft cannot carry. Treat the listing as a comparison example, then check the aircraft manual and the current turbine manual for the exact configuration.
When comparing another engine with this example, place every figure in the same units and use the same definition. A quoted “weight” that excludes the pump and starter is not directly comparable with a complete-set weight; likewise, a fuel-flow figure at a different throttle point can make endurance appear better than it will be in flight.
How do fuel capacity and endurance affect the choice?
Fuel capacity is a mass, balance and endurance decision. Estimate endurance from the turbine’s published consumption and the usable tank volume, then reserve fuel for starting, taxiing, approach and a diversion. The simple planning relationship is:
Also popular on Amazon
- 5-in-1 Connectivity: Equipped with a 4K HDMI port, a 5 Gbps USB-C data port, two 5 Gbps USB-A ports, and a USB C 100W PD-IN port. Note: The USB C 100W PD-IN port supports only charging and does not support data transfer devices such as headphones or speakers.
- Powerful Pass-Through Charging: Supports up to 85W pass-through charging so you can power up your laptop while you use the hub. Note: Pass-through charging requires a charger (not included). Note: To achieve full power for iPad, we recommend using a 45W wall charger.
- Transfer Files in Seconds: Move files to and from your laptop at speeds of up to 5 Gbps via the USB-C and USB-A data ports. Note: The USB C 5Gbps Data port does not support video output.
- HD Display: Connect to the HDMI port to stream or mirror content to an external monitor in resolutions of up to 4K@30Hz. Note: The USB-C ports do not support video output.
- What You Get: Anker 332 USB-C Hub (5-in-1), welcome guide, our worry-free 18-month warranty, and friendly customer service.
estimated minutes = usable fuel (ml) ÷ consumption (ml/min)
Use the full-load figure for a conservative upper-throttle check and the idle figure only to understand low-power consumption. Actual flight uses a range of throttle settings, and the manufacturer’s rates may be specified under conditions that differ from your installation. Keep a margin rather than planning to drain the tank completely.
Check these fuel-system details before purchase:
- Fuel type: Confirm whether the engine accepts kerosene, diesel, propane or another fuel. Do not substitute a fuel because it is common in another turbine community.
- Oil requirement: The evoJet B110neo/B170neo/B220neo instructions call for about 5% turbine oil in the fuel for those engines. That is model-specific guidance; follow the exact manual for any other turbine.
- Tank construction: The cited AMA turbine guide requires rigid fuel tanks in its qualification context. Check the current rule and the aircraft maker’s tank specification.
- Lines and filtration: Match tubing, filters, vents, clunks and shutoff valves to the engine maker’s sizes and materials. Keep the fuel system away from hot zones and moving linkages.
- Balance through the flight: Position tanks so that fuel burn does not move the center of gravity outside the aircraft’s approved range.
Ask whether fuel consumption is reported for the turbine alone or for a complete system, and whether the quoted tank capacity is usable volume. A tank’s nominal volume includes space that may be unavailable because of venting, clunk movement or a required air bubble.
Free tools Windows power users keep installed
One-click scans. No signup required.
What ECU, battery and receiver equipment is required?
A modern RC turbine is an integrated system. The ECU manages starting, acceleration, fuel valves, pump control, temperature protection, cool-down and shutdown; the receiver supplies throttle and failsafe commands. Confirm the electrical architecture before ordering so that the engine does not force an incompatible battery or radio installation.
- List every powered component: ECU, starter, fuel pump, solenoids, valves, sensors, receiver, servos and telemetry modules.
- Check voltage and current limits: Use the turbine manual’s permitted battery voltage, connector ratings and fuse or circuit-protection guidance.
- Plan separate power paths where required: Some installations use independent supplies for receiver/servos and turbine electronics. Follow the engine and radio manufacturers’ wiring diagrams.
- Map the control channels: Assign throttle, ignition/start authorization, telemetry and any remote shutdown input exactly as documented.
- Program failsafe before fuel is connected: Verify that loss of radio signal commands the ECU to shut down, not merely hold the last throttle value.
JetCat’s listed P250-PRO-S system includes an ECU, brushless starter, pump, fuel solenoids and a safety-shutdown input, but included equipment varies by set and revision. Read the exact package contents rather than assuming that a similarly named turbine includes the same interface or ground terminal.
How do you verify mounting, cooling and exhaust clearance?
Make a full-size installation drawing or mock-up before purchase. Measure the engine bay, tailpipe route, fuel-tank envelope, battery shelves and service openings with the aircraft assembled, not just with the fuselage halves on a workbench.
- Mount loads: Ensure the structure can carry the turbine’s mass and vibration loads. Do not attach a clamp to unsupported sheeting or rely on adhesive where the airframe maker specifies mechanical fasteners.
- Alignment: Keep the turbine, intake and tailpipe on the intended centerline. Misalignment can create heat concentration, thrust-line changes or rubbing.
- Heat protection: Provide the specified clearance and shielding around composites, wood, wiring, servos and fuel plumbing. Exhaust temperatures can damage components that look distant during a cold fit check.
- Cooling airflow: Follow the airframe and engine instructions for cooling openings and outlet area. Do not block ECU, pump or battery ventilation.
- Access: Leave room to remove the starter, inspect fuel connections, read the ECU and disconnect the battery without dismantling the entire model.
- Intake safety: Keep loose hardware, clothing, grass and tools away from the intake. Intake suction can pull in objects before a pilot notices.
After the hardware is installed, re-check the center of gravity with the aircraft fueled and with the batteries in their flight positions. Confirm control-surface travel, steering and landing-gear operation before any engine run.
Crashes, No Sound, or Screen Glitches?
Random freezes, missing sound and display glitches usually trace back to one bad driver. Find and replace yours safely.Free scan · under a minutePC Slower Than It Used to Be?
A free scan shows the junk files, broken settings and background clutter dragging Windows down - then fixes them in one click.Free scan · Windows 10 & 11Also popular on Amazon
- Sleek 7-in-1 USB-C Hub: Features an HDMI port, two USB-A 3.0 ports, and a USB-C data port, each providing 5Gbps transfer speeds. It also includes a USB-C PD input port for charging up to 100W and dual SD and TF card slots, all in a compact design.
- Flawless 4K@60Hz Video with HDMI: Delivers exceptional clarity and smoothness with its 4K@60Hz HDMI port, making it ideal for high-definition presentations and entertainment. (Note: Only the HDMI port supports video projection; the USB-C port is for data transfer only.)
- Double Up on Efficiency: The two USB-A 3.0 ports and a USB-C port support a fast 5Gbps data rate, significantly boosting your transfer speeds and improving productivity.
- Fast and Reliable 85W Charging: Offers high-capacity, speedy charging for laptops up to 85W, so you spend less time tethered to an outlet and more time being productive.
- What You Get: Anker USB-C Hub (7-in-1), welcome guide, 18-month warranty, and our friendly customer service.
What safety and radio rules apply to turbine RC aircraft?
Rules vary by country, governing organization and flying site, so verify the current documents before operating. In the cited Academy of Model Aeronautics (AMA) turbine qualification guide, a fixed-wing model must have two fuel-shutoff provisions: one manual and one remotely operated. An ECU-operated shutoff is accepted as remote if it closes when power is lost. The guide also requires ECU shutdown within two seconds of failsafe activation.
AMA’s Gas Turbine Regulations 510-A state: “All radios shall be equipped with fail-safe and ECUs shall be configured to shutdown the engine within 2 seconds of fail-safe activation.” The document displays a revision date of October 2021; check the current revision, local club rules and whether the document applies to your operation.
The cited 510-D context also lists a controllable rudder, steerable undercarriage for rolling takeoff and landing, flaps or flaperons or a speed brake, and the ability to stop under idle thrust on a level hard surface. It gives a 50 lb installed static-thrust ceiling and a 200 mph fixed-wing maximum velocity in that qualification context. These are not universal limits: confirm the current rule, waiver category and site requirements before applying them.
Choose an engine and airframe combination that supports:
- A manual fuel shutoff that can be reached safely on the ground.
- A remote or ECU shutoff that responds reliably to receiver failsafe.
- A documented radio-range test with the engine running.
- A ground-test area separated from people, vehicles, buildings and combustible material.
- A fire-response plan, including the extinguisher type and minimum capacity required by the engine manual or site.
How should you prepare a turbine for its first ground run?
Follow the engine manual’s start sequence and use a site specifically suitable for turbine operation. The evoJet instructions call for an outdoor test site, a functioning CO₂ extinguisher with at least a 2 kg (4.4 lb) filling weight, regular radio-range tests with the engine running, removal of loose items near the intake and keeping clear of both intake and exhaust.
- Inspect the installation: Check mount fasteners, tailpipe alignment, heat shielding, fuel lines, vents, filters, battery connectors and ECU wiring.
- Secure the model: Use the manufacturer’s approved restraint or stand. Keep the exhaust aimed away from people and flammable surfaces.
- Clear the intake zone: Remove tools, rags, hardware, grass and loose clothing. Establish a marked exclusion area.
- Place the extinguisher: Confirm that it is charged, accessible and suitable for the fuel and site rules.
- Test radio range with the engine stopped, then running: Have an assistant observe control response while you follow the radio manufacturer’s range-test procedure.
- Verify shutdown: Test the manual shutoff and the programmed failsafe shutdown before committing to flight. Do this with the turbine maker’s approved procedure and without creating an uncontrolled start condition.
- Inspect after cool-down: Look for heat discoloration, loose clamps, fuel seepage, rubbed wires and abnormal vibration.
Never stand in the intake or exhaust path, and do not assume that a quiet idle is harmless. A turbine can accelerate quickly, and the exhaust stream can propel debris or overheat nearby surfaces.
How do you choose between two turbines that both fit the thrust range?
Use a weighted decision sheet based on the aircraft’s constraints. The lighter or cheaper-looking engine is not automatically the better choice if it needs an adapter, a larger tank, a different battery or an unsupported tailpipe.
Also popular on Amazon
- Portable and powerful USB-C HUB: BENFEI USB Type-C HUB, with super-soft and knot-free silicone woven design cable, meets most mobile office needs. Compact, lightweight, stylish, and powerful portable USB C Hub equipped with 1 x HDMI port, 1 x 100W charging, and 3 x USB ports. 18-month warranty, 24-hour response, to ensure you feel at ease when using our product.
- Design centered on comfort and reliability: Thanks to BENFEI's end-to-end in-house cable production capability, in-house PCBA and assembly capability, using the industry's most advanced silicone woven design and process, 20cm cable in length, no knots, super-soft, the HUB is easy to use in all scenarios: laptop, tablet, stand etc. Super-soft, 25000+ life cycles, to meet your daily carrying and office needs.
- 100W Charging: Support up to 90W USB C pass-through charging via Type-C port to keep your laptop powered. 10W is reserved for other interface operations. No data and video function on the Type-C port.
- 4K HDMI Display: The HDMI port supports media display at resolutions up to 4K 30Hz, keeping every incredible moment detailed and ultra vivid. Please note that the C port of the Host device needs to support video output.
- Transfer Files in Seconds: Transfer files and from your laptop at speeds up to 10 Gbps with USB A 3.2 port. Extra 2 USB A 2.0 ports are perfectly for your keyboards and mouse.
- Eliminate non-compliant candidates: Remove any engine outside the airframe maker’s approved range, physical envelope, speed limit or fuel rules.
- Compare installed mass: Add the engine, mount, ECU, pump, valves, batteries, fuel and tailpipe. Recalculate center of gravity and landing mass.
- Compare dimensions and service access: A few millimeters can determine whether the intake, tailpipe and wiring remain clear and serviceable.
- Calculate fuel requirement: Use published full-load and idle consumption to size the usable tank and estimate a conservative flight plan.
- Check integration: Confirm receiver signal, telemetry, starter procedure, battery voltage, shutdown input and supplied accessories.
- Check the speed envelope: Reject a turbine whose potential exhaust and aircraft speed could exceed the model’s approved velocity, even if its static thrust is attractive.
- Check support: Confirm manuals, spare parts, service turnaround and technical help in your country before purchase.
- Obtain written confirmation: Send the final engine and installation details to the airframe maker when fit or structural approval is uncertain.
What are the most common turbine-selection mistakes?
Choosing by thrust alone
Why it fails: Thrust does not reveal mass, diameter, fuel flow, idle behavior or speed capability.
Fix: Compare the complete specification set and the installed aircraft limits.
Quick wins for a faster PC:
Clear out junk files and repair common Windows errorsFree Scan →Fix the driver behind crashes, sound loss and screen glitchesFind Drivers →Using bare-engine weight
Why it fails: Pumps, ECU, starter, batteries, valves, mounts and fuel can move the center of gravity and increase landing mass.
Fix: Weigh or obtain documented masses for every installed component.
Assuming a universal fuel mixture
Why it fails: Oil ratios and approved fuels are model-specific. The evoJet 5% oil instruction must not be transferred to another engine without confirmation.
Fix: Follow the exact engine manual and use compatible fuel-system materials.
Ignoring idle thrust
Why it fails: A high idle setting can make approaches and runway stopping more demanding.
Fix: Compare idle thrust and verify that the aircraft has the required flaps, speed brake, steering and stopping capability.
Skipping failsafe testing
Why it fails: A receiver signal loss that leaves the throttle active can turn a radio problem into an uncontrolled turbine run.
Fix: Program and test ECU shutdown, observing the applicable two-second rule where required.
Recommended Free Tools
Leaving no heat or intake margin
Why it fails: Tight clearances can damage structure, wiring or fuel lines, while loose objects can be ingested.
Fix: Follow specified clearances, add approved shielding and keep the intake zone clean.
Exceeding the model’s speed limit
Why it fails: Jet exhaust can accelerate a model beyond its flutter or structural envelope.
Fix: Match turbine capability to the airframe’s approved speed and use conservative throttle management until the setup is fully validated.
Also popular on Amazon
- 【Read before You Buy】 Note: This adapter is USB 2.0 version and cannot transmit HDM, VGA, or other video signals. Nevertheless, they are fully capable of charging devices,duplicating files, and can be seamlessly integrated with USB-C earphones, wireless network adapters, and SD card adapters.
- 【Easy to Use and Safe】Thanks to modern manufacturing techniques, we've made these adapters sufficiently compact so that they can remain inserted in your device without noticeable protrusion or inconvenience. This means you don't have to constantly plug and unplug them, reducing the likelihood of wear and misalignment, and making them more convenient to carry around.
- 【Reliable Quality】Engineered for enhanced durability, durable aluminum alloy shell material,get excellent wear resistance and heat dissipation,the male USB C and female USB connectors & the male USB and female USB C connectors are designed to be plugged and unplugged up to 20000 times. Provides data transfer, device charging, memory space expansion, and additional computer peripherals.
- 【Think more for you】Do you need to connect a USB-C-enabled device to an odd device that only has USB-A ports? Then these USB-A male to USB-C female adapters are made for you.Simply insert the adapter into the USB-A port on the device, and you can instantly connect your USB-C device to the device that originally didn't have the correct connection port.
- 【Trusted xiwxi Quality and Service】As a responsible brand seller, you will receive xiwxi's 12-month Quality assurance and lifetime friendly customer service, you're not just buying a product,you're investing in peace of mind with all-round quality and exceptional customer service.
When should you contact the manufacturer before buying?
Contact the airframe maker before purchase whenever the manual does not name the turbine, the proposed engine is near a limit, or the installation requires an adapter or unusual tailpipe. Provide the aircraft version, intended all-up mass, engine model and exact set, mounting drawing, tank location, battery plan and expected flight use.
Contact the turbine maker when you need confirmation of included accessories, ECU and receiver compatibility, fuel and oil requirements, allowable tailpipe geometry, battery specifications, service intervals or failsafe behavior. Keep written answers with the model’s build records so that future owners and inspectors can see the approved configuration.
What is the final decision rule?
Select the smallest turbine that the airframe manufacturer approves and that meets the aircraft’s installed thrust, climb and landing requirements with a practical fuel reserve. Reject any candidate that fails a physical-fit, balance, fuel, electrical, speed, failsafe or local-rule check, even if its thrust rating looks ideal. The safest purchase is the one for which the complete installation—including mount, tailpipe, ECU, fuel system, batteries and shutdown controls—is documented and supported.
How we chose the criteria
The selection framework follows the factors in the cited manufacturer specifications, turbine instructions and AMA documents: airframe compatibility, thrust, mass, dimensions, fuel consumption, fuel and oil, electrical and ECU integration, installation clearances, failsafe shutdown, operating speed, ground-test safety and local qualification rules. The JetCat P250-PRO-S is included only as a concrete specification example; the sources do not establish a universal best turbine, a price comparison or an independent reliability ranking.
Frequently Asked Questions
Can a turbine with more thrust damage a smaller RC jet?
Yes. Excess thrust can push the aircraft beyond its approved airspeed, flutter margin or structural loads, even when the engine physically fits. Use the airframe maker’s speed and thrust limits, and set conservative throttle restrictions if the approved procedure allows them.
How large should the fuel tank be for an RC turbine?
Size it from the engine’s published consumption, usable volume and the flight plan, then add fuel for starting, taxiing, approach and diversion. The tank must also fit the aircraft’s balance envelope and meet the engine and governing organization’s construction requirements.
Do all RC turbines use the same oil percentage?
No. Oil requirements are engine-specific. For example, the cited evoJet B110neo/B170neo/B220neo instructions call for about 5% turbine oil, but that figure should not be applied to another model without checking its manual.
What should I do if my radio failsafe does not stop the turbine?
Do not fly or continue ground operation. Disconnect fuel as directed by the engine maker, correct the receiver-to-ECU programming or wiring, and repeat a controlled failsafe test until the shutdown response meets the applicable rule and manual.

