Do these 3 things before closing this tab:
1Clear out junk files and repair common Windows errors2Scan for outdated or missing drivers - takes under a minute3Repair Windows errors before they cause bigger problemsSome links on this page are affiliate links: if you buy through them we may earn a commission, at no extra cost to you.
A water utility cybersecurity checklist should first identify every IT and operational-technology (OT) asset, then control the IT/OT boundary, lock down remote access, and prove that the utility can recover after an incident. The U.S. Environmental Protection Agency’s EPA Guidance on Improving Cybersecurity at Drinking Water and Wastewater Systems (EPA 817-B-23-001, issued March 2023 and revised August 2024) turns those priorities into assessment questions and recommended actions.
Use the checklist below as a practical gap assessment for drinking-water and wastewater operations. EPA says its checklist is voluntary guidance, not a substitute for determining which statutory, regulatory, contractual, or insurance requirements apply to your system. Record evidence for every answer, assign an owner, and turn gaps into a dated mitigation plan.
As an Amazon Associate I earn from qualifying purchases.
What should be on a water utility cybersecurity checklist?
The most useful checklist covers governance, asset knowledge, network boundaries, identity and remote access, vulnerability handling, workforce practices, incident response, and recovery. Each item should produce evidence that another operator can review, not merely a yes-or-no answer.
| Domain | Verify | Evidence to retain | Escalate when |
|---|---|---|---|
| Governance | A named person is accountable for cybersecurity, including OT responsibilities, resources, and coordination with IT and vendors. | Role assignment, meeting records, risk register, mitigation plan | No one owns an open finding or funding decision. |
| Asset inventory | All IP-addressed IT and OT assets, including legacy and third-party equipment, are listed and reviewed at least quarterly. | Inventory export, owner, location, firmware and software versions, last-review date | An asset cannot be located, patched, isolated, or restored confidently. |
| Network boundary | IT-to-OT connections pass through an approved, monitored, and logged intermediary; access is denied by default. | Current topology, firewall or jump-host rules, connection logs | OT is directly reachable from the internet or ordinary office segments. |
| Identity and access | OT and IT credentials are separate; privileged accounts are distinct from everyday user accounts; unnecessary access is removed promptly. | Access matrix, account review, termination records | Shared, default, dormant, or untraceable administrator accounts exist. |
| Remote access | MFA is used broadly and at minimum for remote OT access; public-facing services and ports are justified. | Remote-access inventory, MFA coverage, vendor approvals, session logs | Remote Desktop Protocol or another service is exposed without a documented operational need. |
| Recovery | Operational systems and data are backed up, backups are isolated from network connections, and restoration is exercised. | Backup catalog, isolation design, restore-exercise record | The utility has no known-good PLC logic, configuration, or drawing set. |
Details checked November 2026.
EPA recommends recurring assessments of both IT and OT. When a priority control cannot be implemented because of infrastructure or operational constraints, document an alternative or compensating control rather than silently accepting the gap.
Popular on Amazon
- 【90 Degree Full Function USB C Adapter】Supports the latest USB4 standard for up to 40Gbps of bandwidth, 8K video support, and up to 240W Fast charging; Support USB PD 3.1 Extended Power Range (EPR) including 140W, 180W and 240W. Your productivity is easily doubled. *Warm Tip: For the best fit, please make sure the USB-C port is fully exposed; thick or bulky cases may affect compatibility.
- 【Reliable Quality】Made from high-quality, scratch-resistant aluminum alloy, delicate metal frame. get excellent wear resistance and heat dissipation. Non-Slip Design for easier insertion and removal.
- 【Small and portable】Ultra thin size, ultra compact design, a petite physique that matches the minimalist design of your modern laptops. Coming with a slim figure that won't block the port next to the one it's plugged into.
- 【Compatibility】Widely work with most usb c, thunderbolt 4/3 devices. Compatibilit for ROG Ally, Steam Deck, Switch, MacBook Pro, Quest 3 VR headset, Surface Book 2, iPhone 18/17/16/15, Samsung Galaxy S23/S22/S21, Note 20/10, Google Pixel, ChromeBook, etc.
- 【Excellence Customer Support】If you experience any issues or cable failure, simply reach out to our dedicated customer service team. We provide a prompt response within 18 hours, providing you with the necessary technical support to resolve any concerns.
How do I inventory SCADA, IT, and legacy assets?
Start with an authoritative list of what can affect treatment, pumping, collection, monitoring, billing, communications, or emergency operations. Include equipment that a vendor owns or manages and older devices that cannot run current security software.
- Set the scope. Include supervisory control and data acquisition (SCADA) servers, human-machine interfaces, programmable logic controllers (PLCs), remote terminal units, engineering workstations, historians, radio and cellular gateways, sensors, network switches, firewalls, virtualization hosts, storage, office systems, cloud services, and backup systems.
- Record identifiers. Capture asset name, physical site, IP address or other network identifier, function, system owner, support vendor, operating system, application, firmware, and hardware version. Mark whether the asset is critical to safe or continuous operation.
- Document the starting configuration. Keep original and current configurations for critical assets. For a PLC, that may include logic and an approved program version; for a firewall, include rules and firmware; for a server, include system build and installed software.
- Map communications. Draw the current topology showing control zones, business networks, remote connections, cellular or radio paths, cloud links, and vendor access. Label which flows are required and which are merely present.
- Reconcile reality with records. Compare the inventory with switch, firewall, endpoint, wireless, and remote-access records. Investigate unknown addresses, duplicate names, unmanaged devices, and equipment that appears in documentation but not on site.
- Set the review cycle. EPA recommends reviewing the inventory no less than quarterly and updating it after projects, replacements, network changes, or vendor handoffs.
An inventory is useful only if operators can use it during an outage. Store an offline or otherwise independently accessible copy of critical configuration records so a compromised management system does not become the only place those records exist.
Recommended Free Tools
How do I separate IT and OT networks at a water utility?
Use segmentation to limit what an office compromise can reach and to make approved traffic visible. The goal is not simply two different IP ranges; it is an enforced boundary with an explicit business or operational reason for every permitted connection.
- Place a firewall, bastion host, jump box, or DMZ between IT and OT. Route approved connections through that intermediary rather than allowing workstation-to-controller paths.
- Deny connections by default and permit only documented source, destination, port, protocol, direction, and time window. Review rules when systems or vendors change.
- Monitor and log connections at the boundary. Send logs to a location that remains available if an OT component is unavailable, and restrict who can alter or delete them.
- Keep engineering workstations and operator consoles in the appropriate OT zone instead of treating them as ordinary office endpoints.
- Separate administrative credentials for each environment. A compromise of an office administrator account should not automatically provide control-system privileges.
- Remove unnecessary internet paths from OT. If a connection is explicitly required for operations, document its purpose, compensating protections, monitoring, and emergency shutdown procedure.
Review the design with both OT engineers and IT staff. OT availability and safety constraints can make an aggressive change unsafe; the compensating-control decision and its owner should be written into the mitigation plan.
How do I secure remote access to a water treatment plant SCADA system?
Minimize remote access, require strong identity verification, and make every session attributable and reviewable. EPA recommends MFA broadly and at minimum for remote access to OT.
Also popular on Amazon
- 5-in-1 Connectivity: Equipped with a 4K HDMI port, a 5 Gbps USB-C data port, two 5 Gbps USB-A ports, and a USB C 100W PD-IN port. Note: The USB C 100W PD-IN port supports only charging and does not support data transfer devices such as headphones or speakers.
- Powerful Pass-Through Charging: Supports up to 85W pass-through charging so you can power up your laptop while you use the hub. Note: Pass-through charging requires a charger (not included). Note: To achieve full power for iPad, we recommend using a 45W wall charger.
- Transfer Files in Seconds: Move files to and from your laptop at speeds of up to 5 Gbps via the USB-C and USB-A data ports. Note: The USB C 5Gbps Data port does not support video output.
- HD Display: Connect to the HDMI port to stream or mirror content to an external monitor in resolutions of up to 4K@30Hz. Note: The USB-C ports do not support video output.
- What You Get: Anker 332 USB-C Hub (5-in-1), welcome guide, our worry-free 18-month warranty, and friendly customer service.
- List every remote path. Include VPNs, vendor portals, cellular modems, remote monitoring services, cloud dashboards, remote desktop tools, and emergency accounts. Identify the system reached, who uses it, and whether the path is still necessary.
- Remove exposure that is not required. Close unused ports and disable public-facing services, including unnecessary remote desktop services. Do not leave a control asset directly reachable from the internet merely for convenience.
- Place access at the boundary. Terminate remote connections in a controlled intermediary such as a VPN concentrator, bastion host, jump box, or DMZ. Do not allow a vendor laptop to connect straight to a PLC or HMI.
- Require MFA. Apply MFA to remote OT access at a minimum and extend it across IT and other remote services where feasible. Record exceptions and their compensating controls.
- Use named, separate accounts. Do not share operator or vendor credentials. Keep OT and IT credentials separate, and use distinct administrative accounts rather than elevating a daily-use account.
- Limit time and scope. Approve the person, destination, reason, and time window. Disable or expire access when the work ends, and terminate accounts immediately when a person changes role or no longer needs access.
- Log and review sessions. Retain authentication and connection records sufficient to identify who connected, when, and to which system. Investigate unexpected access and preserve records for incident response.
Vendor remote access deserves the same controls as employee access. Require a named contact, an approved maintenance window, a documented path through the boundary, and a process to revoke access when the contract or task ends.
Free tools Windows power users keep installed
One-click scans. No signup required.
How should a utility manage passwords, privileges, and removable media?
Identity controls reduce the chance that a stolen password or unauthorized device becomes an operational incident. They also make investigation possible when a change is disputed.
- Change vendor-supplied default passwords before equipment or software enters service.
- Establish a minimum password-length requirement and prohibit reuse where the system supports stronger controls.
- Separate standard user and administrative accounts. Review administrative privileges regularly and remove rights that are no longer justified.
- Maintain a joiner, mover, and leaver process so access changes follow employment and role changes without delay.
- Prohibit unauthorized hardware on IT and OT assets. Where feasible, remove, disable, or physically secure unused USB and other ports.
- Control removable media used for PLC logic, firmware, engineering files, or data transfer. Approve the device and purpose, scan it with an appropriate process before use, and record transfers according to the utility’s procedures.
- Provide annual cybersecurity awareness training at minimum. Personnel who regularly operate or maintain OT need additional OT-specific instruction, including safe handling of remote access, removable media, and abnormal process behavior.
How do I handle vulnerabilities and patching in OT?
Address known vulnerabilities according to operational risk, beginning with critical assets as appropriate; do not assume that an immediate patch is always safe for a live process. The decision, test or maintenance constraint, and compensating control should be documented.
- Identify affected assets from the inventory and determine whether the vulnerable component is reachable from IT, the internet, a vendor path, or removable media.
- Rank the issue using consequence to safe and reliable operations, exposure, exploitability information, and the availability of a vendor fix or mitigation.
- Coordinate maintenance with operations, engineering, and the vendor. Preserve a known-good configuration and a rollback path before changing a critical controller or server.
- If patching is delayed, apply feasible alternatives such as segmentation, disabling an unnecessary service, tightening firewall rules, restricting accounts, or increasing monitoring.
- Record the decision, owner, target date, and evidence that the mitigation was completed. Reassess when new threat information, equipment, or operating conditions appear.
What should be in a water utility incident-response and recovery plan?
The plan should explain how the utility will keep people safe, stabilize operations, preserve evidence, communicate, and restore trustworthy systems. It must cover both cyber events and the operational consequences of a disabled or manipulated process-control system.
Write playbooks for scenarios such as loss of SCADA visibility, manipulated set points, disabled control systems, theft or loss of operational or financial data, and exposure of sensitive information. For each scenario, identify decision authority, immediate safety actions, isolation steps, manual-operation options, technical recovery steps, and communications.
What’s actually slowing this PC down?
Pick the symptom - the matching free tool is one click away.
Also popular on Amazon
- Sleek 7-in-1 USB-C Hub: Features an HDMI port, two USB-A 3.0 ports, and a USB-C data port, each providing 5Gbps transfer speeds. It also includes a USB-C PD input port for charging up to 100W and dual SD and TF card slots, all in a compact design.
- Flawless 4K@60Hz Video with HDMI: Delivers exceptional clarity and smoothness with its 4K@60Hz HDMI port, making it ideal for high-definition presentations and entertainment. (Note: Only the HDMI port supports video projection; the USB-C port is for data transfer only.)
- Double Up on Efficiency: The two USB-A 3.0 ports and a USB-C port support a fast 5Gbps data rate, significantly boosting your transfer speeds and improving productivity.
- Fast and Reliable 85W Charging: Offers high-capacity, speedy charging for laptops up to 85W, so you spend less time tethered to an outlet and more time being productive.
- What You Get: Anker USB-C Hub (7-in-1), welcome guide, 18-month warranty, and our friendly customer service.
Document how and to whom incidents are reported. Depending on the event and applicable obligations, the plan may include law enforcement, CISA, state regulators, WaterISAC, and a cyber-insurance provider. Confirm contact details outside the affected network and define who can authorize notifications.
Back up the systems needed for operations, including network configurations, PLC logic, engineering drawings, and personnel records. Apply the 3-2-1 pattern described by EPA: three copies, on two different media types, with one copy off site. Keep backups isolated from ordinary network connections so ransomware or an administrator compromise cannot encrypt every copy. Test restoration and record what was restored, from which copy, by whom, and what corrective actions followed.
Exercise the plan in both discussion-based and operational formats. Update it after exercises, incidents, major projects, and changes to contacts or system architecture. An unpracticed plan is unlikely to work when operators are also dealing with a process upset or loss of communications.
How do I turn checklist findings into a prioritized mitigation plan?
Convert each gap into a specific action with an owner, resources, schedule, dependency, and success evidence. A spreadsheet or risk register is sufficient if it remains current and is reviewed by the people who control operations and funding.
PC Slower Than It Used to Be?
A free scan shows the junk files, broken settings and background clutter dragging Windows down - then fixes them in one click.Free scan · Windows 10 & 11Outdated Drivers Are Slowing You Down
One free scan finds every outdated or missing driver and matches the right update for your exact hardware.Free scan · exact hardware match- Describe the exposure. State the asset, connection, account, process, or missing capability and the consequence if it fails or is abused.
- Choose an order. Address exposures that could affect safe or continuous operations, are externally reachable, enable broad lateral movement, or prevent recovery before lower-consequence housekeeping items.
- Assign accountability. Name an OT, IT, operations, management, or vendor owner; do not assign a finding to an unnamed department.
- Define the finish line. Examples include an approved topology, a closed firewall rule, MFA coverage for a specified remote path, a restored PLC program, or a completed exercise with corrective actions.
- Record constraints and alternatives. If a control cannot be adopted because of legacy equipment, staffing, safety, or availability constraints, document the reason and the compensating measures.
- Reassess continuously. Revisit priorities as systems, standards, and threat information evolve, as EPA advises.
Does EPA guidance apply to every water and wastewater system?
EPA recommends that all water and wastewater owners and operators evaluate risks to their IT and OT systems and develop mitigation plans. Community water systems serving more than 3,300 people have duties under Safe Drinking Water Act section 1433 to consider cybersecurity in risk and resilience assessments and emergency response plans.
Also popular on Amazon
- Portable and powerful USB-C HUB: BENFEI USB Type-C HUB, with super-soft and knot-free silicone woven design cable, meets most mobile office needs. Compact, lightweight, stylish, and powerful portable USB C Hub equipped with 1 x HDMI port, 1 x 100W charging, and 3 x USB ports. 18-month warranty, 24-hour response, to ensure you feel at ease when using our product.
- Design centered on comfort and reliability: Thanks to BENFEI's end-to-end in-house cable production capability, in-house PCBA and assembly capability, using the industry's most advanced silicone woven design and process, 20cm cable in length, no knots, super-soft, the HUB is easy to use in all scenarios: laptop, tablet, stand etc. Super-soft, 25000+ life cycles, to meet your daily carrying and office needs.
- 100W Charging: Support up to 90W USB C pass-through charging via Type-C port to keep your laptop powered. 10W is reserved for other interface operations. No data and video function on the Type-C port.
- 4K HDMI Display: The HDMI port supports media display at resolutions up to 4K 30Hz, keeping every incredible moment detailed and ultra vivid. Please note that the C port of the Host device needs to support video output.
- Transfer Files in Seconds: Transfer files and from your laptop at speeds up to 10 Gbps with USB A 3.2 port. Extra 2 USB A 2.0 ports are perfectly for your keyboards and mouse.
The EPA checklist is one way to support those duties, not a binding rule by itself. Determine which federal, state, local, contractual, and insurance requirements apply to your system, and retain records that show how the assessment and mitigation decisions were made.
Independent reader supportYour contribution helps us test, update, and keep practical guides available for everyone.Which other frameworks can complement the EPA checklist?
EPA identifies CISA, NIST, AWWA, ISO, and ISA/IEC approaches as other assessment or standards options. The cited guidance does not rank them universally; select or combine methods based on your utility’s size, operating environment, OT/SCADA coverage, assessment depth, implementation effort, and ability to produce a documented mitigation plan.
| Decision question | Why it matters |
|---|---|
| Does the method address OT and process-control risks? | A purely enterprise-IT assessment can miss PLC, HMI, engineering, safety, and availability concerns. |
| Can a small utility maintain it? | A method that requires skills or documentation the utility cannot sustain will not reduce risk unless assistance is arranged. |
| Does it produce owners, dates, resources, and evidence? | The output should feed the mitigation plan rather than remain a one-time score. |
| Can it be repeated after changes? | Recurring assessment is necessary as networks, vendors, standards, and threat information evolve. |
Use the EPA checklist as the practical starting point, then map its findings to the framework or requirements your utility must follow. Technical assistance or a qualified assessment provider can help where internal staff cannot safely evaluate legacy OT or recovery procedures.
What is the minimum useful review cycle?
Begin with a cross-functional review involving utility leadership, IT, OT/SCADA engineering, operations, and relevant vendors. Establish the asset inventory and critical-system backups first, then work through boundary controls, remote access, identity, vulnerabilities, response, and exercises. Review the inventory at least quarterly, reassess the broader program periodically and after significant changes, and keep the mitigation register open until evidence shows each action is complete.
The practical outcome is not a completed form; it is a utility that knows what it operates, limits who and what can reach control systems, can detect and contain an abnormal connection, and can restore trusted operations.
Also popular on Amazon
- 【Read before You Buy】 Note: This adapter is USB 2.0 version and cannot transmit HDM, VGA, or other video signals. Nevertheless, they are fully capable of charging devices,duplicating files, and can be seamlessly integrated with USB-C earphones, wireless network adapters, and SD card adapters.
- 【Easy to Use and Safe】Thanks to modern manufacturing techniques, we've made these adapters sufficiently compact so that they can remain inserted in your device without noticeable protrusion or inconvenience. This means you don't have to constantly plug and unplug them, reducing the likelihood of wear and misalignment, and making them more convenient to carry around.
- 【Reliable Quality】Engineered for enhanced durability, durable aluminum alloy shell material,get excellent wear resistance and heat dissipation,the male USB C and female USB connectors & the male USB and female USB C connectors are designed to be plugged and unplugged up to 20000 times. Provides data transfer, device charging, memory space expansion, and additional computer peripherals.
- 【Think more for you】Do you need to connect a USB-C-enabled device to an odd device that only has USB-A ports? Then these USB-A male to USB-C female adapters are made for you.Simply insert the adapter into the USB-A port on the device, and you can instantly connect your USB-C device to the device that originally didn't have the correct connection port.
- 【Trusted xiwxi Quality and Service】As a responsible brand seller, you will receive xiwxi's 12-month Quality assurance and lifetime friendly customer service, you're not just buying a product,you're investing in peace of mind with all-round quality and exceptional customer service.
Frequently Asked Questions
Does the EPA cybersecurity checklist replace legal compliance requirements?
No. EPA describes the checklist as voluntary guidance. A utility still has to identify the federal, state, local, contractual, and insurance obligations that apply to its system; the checklist can help organize evidence for those obligations.
What should a vendor provide before receiving remote OT access?
Require a named user or team, the systems and time window requested, the connection method through the approved boundary, and a contact who can end the session. Make sure the account can be disabled immediately and that connection activity is logged for later review.
What if an old PLC cannot support MFA or modern endpoint software?
Do not leave the limitation undocumented. Isolate the device, restrict the paths and accounts that can reach it, remove unnecessary services, increase monitoring, and record those compensating controls with an owner and reassessment date.
How can operators keep recovery information available during a network outage?
Maintain an independently accessible copy of critical configurations, drawings, contact lists, and response procedures. Keep at least one backup outside ordinary network connections and verify through restoration exercises that the files are usable, not merely present.

