Do these 3 things before closing this tab:
1Fix the driver behind crashes, sound loss and screen glitches2Repair Windows errors before they cause bigger problems3Scan for outdated or missing drivers - takes under a minuteSome links on this page are affiliate links: if you buy through them we may earn a commission, at no extra cost to you.
Pairing Skullcandy Crusher ANC 2 headphones with an iPhone, Android phone, or laptop takes only the headphones’ Bluetooth pairing mode and the host device’s Bluetooth settings. Turn the headphones on, select Crusher ANC 2 when it appears, and wait for the “Connected” prompt. The same basic sequence applies across Bluetooth-enabled devices; menu names can differ by operating-system version.
This guide covers first-time pairing, entering pairing mode directly, connecting a second device with Multipoint Pairing, what the lights and voice prompts mean, and the reset procedure to use when the headphones will not appear or connect. The instructions follow Skullcandy’s Crusher ANC 2 support guidance.
As an Amazon Associate I earn from qualifying purchases.
Windows Errors? Fix Them Before They Spread
Repair common Windows errors and clear accumulated junk for a smoother, more stable PC - no reinstall needed.Free scan · no reinstallOutdated Drivers Are Slowing You Down
One free scan finds every outdated or missing driver and matches the right update for your exact hardware.Free scan · exact hardware matchWhat you need before pairing
You need the Crusher ANC 2 headphones, a charged battery, and an iPhone, Android phone, or laptop with Bluetooth enabled. No cable is required for Bluetooth setup. The USB-C charging cable and AUX cable listed with the headphones are not part of the wireless pairing process.
Keep the headphones close to the device while pairing and temporarily disable Bluetooth on other nearby devices that might reconnect to them. If the headphones have never been paired, the first power-on sequence normally places them in pairing mode automatically. If they have already been paired and you need to start over, use the six-second pairing shortcut described below.
Popular on Amazon
- 【90 Degree Full Function USB C Adapter】Supports the latest USB4 standard for up to 40Gbps of bandwidth, 8K video support, and up to 240W Fast charging; Support USB PD 3.1 Extended Power Range (EPR) including 140W, 180W and 240W. Your productivity is easily doubled. *Warm Tip: For the best fit, please make sure the USB-C port is fully exposed; thick or bulky cases may affect compatibility.
- 【Reliable Quality】Made from high-quality, scratch-resistant aluminum alloy, delicate metal frame. get excellent wear resistance and heat dissipation. Non-Slip Design for easier insertion and removal.
- 【Small and portable】Ultra thin size, ultra compact design, a petite physique that matches the minimalist design of your modern laptops. Coming with a slim figure that won't block the port next to the one it's plugged into.
- 【Compatibility】Widely work with most usb c, thunderbolt 4/3 devices. Compatibilit for ROG Ally, Steam Deck, Switch, MacBook Pro, Quest 3 VR headset, Surface Book 2, iPhone 18/17/16/15, Samsung Galaxy S23/S22/S21, Note 20/10, Google Pixel, ChromeBook, etc.
- 【Excellence Customer Support】If you experience any issues or cable failure, simply reach out to our dedicated customer service team. We provide a prompt response within 18 hours, providing you with the necessary technical support to resolve any concerns.
The Bluetooth entry can appear as Crusher ANC 2. After a reset, Skullcandy’s instructions show the name in uppercase as CRUSHER ANC 2; capitalization does not change which device to select.
How do I pair Crusher ANC 2 with an iPhone, Android phone, or laptop for the first time?
Power on the headphones, wait for “Ready to Pair,” open the host device’s Bluetooth settings, and select Crusher ANC 2. Confirm the pairing request if one appears, then wait for the headphones to say “Connected.”
- Power on the headphones. Hold the power button for one second. A tone and blue LED indicate that they have powered on. Voice prompts report the battery status and say “ANC ON.”
- Wait for pairing mode. During first-time setup, the headphones announce “Ready to Pair”. The LED pulses red and blue while they are discoverable.
- Open Bluetooth on the host. On your iPhone, Android phone, or laptop, open the device’s Settings app and its Bluetooth page. Turn Bluetooth on if it is off, then wait for nearby devices to populate. The exact wording and location of the Bluetooth page can change between iOS, Android, Windows, macOS, and their respective versions.
- Choose the headphones. Tap or click Crusher ANC 2 in the available-device list. Do not choose a similarly named entry from another accessory.
- Accept the prompt. If the phone or laptop asks you to confirm pairing, choose the on-screen Pair, Connect, or equivalent confirmation.
- Verify the connection. The headphones say “Connected” when pairing succeeds. The host device should also move the headphones into its connected or paired-device list.
If the name does not appear, leave the Bluetooth screen open for a few seconds while the red-and-blue LED continues to pulse. If it still does not appear, use the direct pairing-mode shortcut or the reset procedure later in this guide rather than repeatedly selecting unrelated entries.
How do I put the headphones into pairing mode directly?
When the headphones are off, hold the power button for six seconds. This enters pairing mode directly, without relying on the initial first-power-on sequence.
- Turn the Crusher ANC 2 off if they are powered on.
- Press and hold the power button for six seconds.
- Listen for “Ready to Pair” and look for the red-and-blue pulsing LED.
- Open Bluetooth settings on the iPhone, Android phone, or laptop and select Crusher ANC 2.
- Accept any pairing confirmation and wait for “Connected.”
This six-second hold is useful after the headphones have previously connected to another device, after Bluetooth was switched off mid-setup, or when you want to pair with a new host without first navigating an old connection.
Also popular on Amazon
- 5-in-1 Connectivity: Equipped with a 4K HDMI port, a 5 Gbps USB-C data port, two 5 Gbps USB-A ports, and a USB C 100W PD-IN port. Note: The USB C 100W PD-IN port supports only charging and does not support data transfer devices such as headphones or speakers.
- Powerful Pass-Through Charging: Supports up to 85W pass-through charging so you can power up your laptop while you use the hub. Note: Pass-through charging requires a charger (not included). Note: To achieve full power for iPad, we recommend using a 45W wall charger.
- Transfer Files in Seconds: Move files to and from your laptop at speeds of up to 5 Gbps via the USB-C and USB-A data ports. Note: The USB C 5Gbps Data port does not support video output.
- HD Display: Connect to the HDMI port to stream or mirror content to an external monitor in resolutions of up to 4K@30Hz. Note: The USB-C ports do not support video output.
- What You Get: Anker 332 USB-C Hub (5-in-1), welcome guide, our worry-free 18-month warranty, and friendly customer service.
How do I pair Crusher ANC 2 with a second device?
Crusher ANC 2 supports Skullcandy’s Multipoint Pairing, which lets the headphones maintain connections with two devices. Pair the first device normally, then trigger pairing mode from the powered-on headphones and select them on the second device.
- Make sure the headphones are powered on and connected to the first device.
- Press the power button once.
- Then press and hold the power button for one second.
- The headphones should say “Ready to Pair” and the LED should pulse red and blue.
- On the second phone or laptop, open Bluetooth settings and select Crusher ANC 2.
- Confirm the pairing request if shown. A “Connected” prompt confirms that the second device has joined.
After two devices have been paired, the headphones automatically reconnect to the two most recently paired devices when they are powered on. This is useful if you move between a phone and a laptop, but it can also make an older nearby device reclaim the connection. Turning Bluetooth off on that older device before powering on the headphones prevents it from competing for the automatic reconnection.
Multipoint does not mix audio from both devices at the same time. Starting playback on one device pauses playback on the other. An incoming call on the second device takes priority over the current stream; when the call ends, the previous stream resumes. If you want the headphones to maintain only one connection, turn off Multipoint Pairing in the Skullcandy mobile app.
Can I pair from the Skullcandy app instead of Bluetooth settings?
No. The core pairing action happens in the host device’s Bluetooth settings. The app is for supported smart features and settings, including Multipoint Pairing control, after the Bluetooth connection is established.
Skullcandy’s FAQ identifies Android and iOS mobile devices for app features and says the app is not supported on PC, iPad, or MacBook. That limitation concerns the app, not the headphones’ basic Bluetooth connection: a compatible laptop can still be paired from its own Bluetooth settings. If you are using a laptop, complete the pairing first without looking for a desktop version of the app.
Quick wins for a faster PC:
Fix the driver behind crashes, sound loss and screen glitchesFind Drivers →Repair Windows errors before they cause bigger problemsFix Now →Scan for outdated or missing drivers - takes under a minuteDriver Scan →Also popular on Amazon
- Sleek 7-in-1 USB-C Hub: Features an HDMI port, two USB-A 3.0 ports, and a USB-C data port, each providing 5Gbps transfer speeds. It also includes a USB-C PD input port for charging up to 100W and dual SD and TF card slots, all in a compact design.
- Flawless 4K@60Hz Video with HDMI: Delivers exceptional clarity and smoothness with its 4K@60Hz HDMI port, making it ideal for high-definition presentations and entertainment. (Note: Only the HDMI port supports video projection; the USB-C port is for data transfer only.)
- Double Up on Efficiency: The two USB-A 3.0 ports and a USB-C port support a fast 5Gbps data rate, significantly boosting your transfer speeds and improving productivity.
- Fast and Reliable 85W Charging: Offers high-capacity, speedy charging for laptops up to 85W, so you spend less time tethered to an outlet and more time being productive.
- What You Get: Anker USB-C Hub (7-in-1), welcome guide, 18-month warranty, and our friendly customer service.
If the headphones are already Bluetooth-connected but the app does not link, close and reopen the app. If that does not help, toggle Bluetooth off and on, then reopen the app.
What do the Crusher ANC 2 lights and voice prompts mean?
The voice prompts provide the clearest confirmation of each stage, while the LED gives a visual indication when you cannot hear the headphones.
| Indicator | What it tells you | What to do |
|---|---|---|
| Tone and blue LED after a one-second power-button hold | The headphones have powered on. | Continue to the Bluetooth list and wait for the pairing prompt if this is first-time setup. |
| Voice prompt: “Ready to Pair” | The headphones are in discoverable pairing mode. | Select Crusher ANC 2 on the phone or laptop. |
| Red-and-blue pulsing LED | The headphones are waiting for a Bluetooth device. | Keep the Bluetooth page open and choose the headphones. |
| Voice prompt: “Connected” | The host device has completed the connection. | Start playback from the connected device. |
| Tone and three rapid purple LED flashes | The paired-device list has been reset successfully. | Turn Bluetooth back on for the host and pair again. |
The initial power-on prompt may also report battery status and say “ANC ON.” That announcement is part of startup and is not, by itself, proof that Bluetooth pairing is complete; look for “Connected.”
Why is Crusher ANC 2 not appearing in Bluetooth?
The most common cause is that the headphones are not in discoverable pairing mode or that another device has already claimed the connection. Put them into pairing mode again, then remove stale entries and reset the pairing list if necessary.
What’s actually slowing this PC down?
Pick the symptom - the matching free tool is one click away.
Try these checks first
- Confirm that the headphones are powered on and that the LED is pulsing red and blue.
- Wait for the exact voice prompt “Ready to Pair.”
- Keep the headphones close to the phone or laptop and leave the Bluetooth device list open while it refreshes.
- Turn Bluetooth off on nearby phones, tablets, or computers that have used the headphones before. Those devices may reconnect automatically.
- Search for both the usual mixed-case name, Crusher ANC 2, and the uppercase form shown after reset, CRUSHER ANC 2.
- If the headphones are off, hold the power button for six seconds to enter pairing mode directly.
If the headphones still do not appear, remove the saved Crusher ANC 2 entry from the host device, switch that host’s Bluetooth off, and perform the full reset below.
Also popular on Amazon
- Portable and powerful USB-C HUB: BENFEI USB Type-C HUB, with super-soft and knot-free silicone woven design cable, meets most mobile office needs. Compact, lightweight, stylish, and powerful portable USB C Hub equipped with 1 x HDMI port, 1 x 100W charging, and 3 x USB ports. 18-month warranty, 24-hour response, to ensure you feel at ease when using our product.
- Design centered on comfort and reliability: Thanks to BENFEI's end-to-end in-house cable production capability, in-house PCBA and assembly capability, using the industry's most advanced silicone woven design and process, 20cm cable in length, no knots, super-soft, the HUB is easy to use in all scenarios: laptop, tablet, stand etc. Super-soft, 25000+ life cycles, to meet your daily carrying and office needs.
- 100W Charging: Support up to 90W USB C pass-through charging via Type-C port to keep your laptop powered. 10W is reserved for other interface operations. No data and video function on the Type-C port.
- 4K HDMI Display: The HDMI port supports media display at resolutions up to 4K 30Hz, keeping every incredible moment detailed and ultra vivid. Please note that the C port of the Host device needs to support video output.
- Transfer Files in Seconds: Transfer files and from your laptop at speeds up to 10 Gbps with USB A 3.2 port. Extra 2 USB A 2.0 ports are perfectly for your keyboards and mouse.
How do I reset Crusher ANC 2 pairing when connection fails?
Resetting clears the headphones’ paired-device list. Skullcandy’s procedure uses the host device’s saved-entry removal first, followed by a six-second Volume Down hold on the headphones.
- Forget the headphones on the host. In the phone or laptop’s saved Bluetooth devices, remove or forget the Crusher ANC 2 entry.
- Turn host Bluetooth off. Switch Bluetooth off on that device so it cannot immediately attempt a stale reconnection.
- Power on the headphones. If necessary, hold the power button until they start.
- Hold Volume Down for six seconds. Keep holding until you hear a tone and see three rapid purple LED flashes.
- Wait for pairing mode. The headphones then say “Ready to Pair” and the LED pulses red and blue.
- Restore Bluetooth. Turn Bluetooth back on for the phone or laptop.
- Pair again. Select CRUSHER ANC 2 (or Crusher ANC 2) and accept Pair or OK if prompted.
- Confirm success. Wait for the “Connected” voice prompt.
Resetting is more comprehensive than simply toggling Bluetooth because it removes the headphones’ remembered connections. You will need to pair every device again after the reset, including a second Multipoint device.
What should I do if the headphones connect but the app does not?
Keep the Bluetooth connection intact and restart the mobile app first. Skullcandy recommends closing and reopening the app; if it still does not link, toggle Bluetooth off and on, then reopen the app.
- Leave the headphones powered on and connected in the phone’s Bluetooth settings.
- Close the Skullcandy app completely rather than merely switching away from it.
- Open the app again and allow it to search for the already-connected headphones.
- If it still fails, turn the phone’s Bluetooth off, wait briefly, and turn it back on.
- Reopen the app and check whether the Crusher ANC 2 is now recognized.
The app is supported on mobile devices, not PC, iPad, or MacBook, according to Skullcandy’s FAQ. For those unsupported platforms, use the host device’s Bluetooth controls for connection and playback.
Independent reader supportYour contribution helps us test, update, and keep practical guides available for everyone.How do I switch between a phone and a laptop with Multipoint?
Once both devices are paired, leave Bluetooth enabled on both and let the headphones reconnect to the two most recently paired devices at startup. Select the device whose audio you want to use, remembering that only one device streams audio at a time.
Also popular on Amazon
- 【Read before You Buy】 Note: This adapter is USB 2.0 version and cannot transmit HDM, VGA, or other video signals. Nevertheless, they are fully capable of charging devices,duplicating files, and can be seamlessly integrated with USB-C earphones, wireless network adapters, and SD card adapters.
- 【Easy to Use and Safe】Thanks to modern manufacturing techniques, we've made these adapters sufficiently compact so that they can remain inserted in your device without noticeable protrusion or inconvenience. This means you don't have to constantly plug and unplug them, reducing the likelihood of wear and misalignment, and making them more convenient to carry around.
- 【Reliable Quality】Engineered for enhanced durability, durable aluminum alloy shell material,get excellent wear resistance and heat dissipation,the male USB C and female USB connectors & the male USB and female USB C connectors are designed to be plugged and unplugged up to 20000 times. Provides data transfer, device charging, memory space expansion, and additional computer peripherals.
- 【Think more for you】Do you need to connect a USB-C-enabled device to an odd device that only has USB-A ports? Then these USB-A male to USB-C female adapters are made for you.Simply insert the adapter into the USB-A port on the device, and you can instantly connect your USB-C device to the device that originally didn't have the correct connection port.
- 【Trusted xiwxi Quality and Service】As a responsible brand seller, you will receive xiwxi's 12-month Quality assurance and lifetime friendly customer service, you're not just buying a product,you're investing in peace of mind with all-round quality and exceptional customer service.
- Pair the phone and laptop separately using the first-device and second-device procedures above.
- Power the headphones off and back on later; they should reconnect automatically to the two most recently paired devices.
- Start playback on the phone or laptop you want to hear. Starting playback on one pauses the other.
- If a call arrives on the second device, answer it there; the call takes priority over the current stream.
- After the call ends, the previous stream should resume.
If the wrong device reconnects, turn Bluetooth off on that device temporarily, then power the headphones on and connect from the device you want. For a permanent single-device setup, disable Multipoint Pairing in the Skullcandy mobile app.
Which pairing method should I use?
Use the normal one-second power-on flow for a brand-new setup, the six-second power-button hold when you need to make the headphones discoverable immediately, and the reset sequence only when saved connections are blocking a clean pairing.
Recommended Free Tools
| Situation | Best method | Expected result |
|---|---|---|
| First connection to any phone or laptop | Hold power for one second, then follow “Ready to Pair.” | The host lists Crusher ANC 2 and the headphones say “Connected.” |
| Headphones are off and you want to pair with a new host | Hold power for six seconds. | Direct pairing mode with red-and-blue pulsing. |
| Add a second phone or laptop | Press power once, then hold it for one second while connected to the first device. | Multipoint pairing mode for the second host. |
| Headphones do not appear or keep reconnecting incorrectly | Forget the saved host entry, turn Bluetooth off, then hold Volume Down for six seconds. | Three purple flashes, followed by a clean “Ready to Pair” state. |
| Bluetooth works but the mobile app does not | Close and reopen the app; then toggle Bluetooth and reopen it. | The app may discover the existing Bluetooth connection. |
Common mistakes that prevent a successful pairing
- Looking for the app on a laptop. The app is for supported mobile devices; laptop pairing is completed in the laptop’s Bluetooth settings.
- Choosing the wrong device name. Select Crusher ANC 2, not an unrelated nearby accessory. After reset, the list may show CRUSHER ANC 2 in uppercase.
- Releasing the button too soon. One second powers on; six seconds from off enters direct pairing mode. For a second device, press once and then hold for one second.
- Assuming a blue startup LED means connection. Startup only confirms power. “Connected” is the confirmation that Bluetooth pairing succeeded.
- Leaving the old host active. The two most recently paired devices can reconnect automatically. Turn Bluetooth off on an old host when you need another device to take priority.
- Resetting without removing the host entry. Skullcandy’s reset flow starts by forgetting the saved headphones on the host and turning that host’s Bluetooth off.
- Expecting simultaneous audio. Multipoint keeps two connections but does not play both streams at once; playback on one device pauses the other.
Pairing checklist
- Charge the headphones enough for setup and keep them near the host.
- Turn off Bluetooth on old nearby hosts if automatic reconnection is getting in the way.
- For first-time setup, hold the power button for one second.
- Wait for “Ready to Pair” and the red-and-blue pulsing LED.
- Open Bluetooth settings on the iPhone, Android phone, or laptop.
- Select Crusher ANC 2 and confirm Pair, Connect, or the equivalent prompt.
- Wait for “Connected.”
- For a second device, press power once and then hold it for one second.
- If pairing remains broken, forget the saved entry and use the six-second Volume Down reset.
For the manufacturer’s model-specific diagrams, prompts, and feature notes, see Skullcandy’s Crusher ANC 2 product-help page and the official product information.
Frequently Asked Questions
How can I stop an old phone from reconnecting to Crusher ANC 2?
Turn Bluetooth off on the old phone before powering on the headphones, or remove the headphones from that phone’s saved Bluetooth devices. This prevents the two most recently paired devices from competing for the automatic reconnection.
What does the red-and-blue flashing light mean on Crusher ANC 2?
It means the headphones are in discoverable pairing mode and waiting for a host device. Look for the voice prompt “Ready to Pair,” then choose Crusher ANC 2 in the phone or laptop’s Bluetooth list.
Do I have to reset the headphones every time I change phones?
No. Use the six-second power-button hold from off to enter pairing mode for a new host. Reset only when stale saved connections or a failed pairing require clearing the paired-device list.
Can the Skullcandy app be installed on a MacBook or iPad?
Skullcandy’s FAQ says the app is supported on mobile devices and not on PC, iPad, or MacBook. Those computers can still use the headphones’ standard Bluetooth controls where Bluetooth is available.

