Some links on this page are affiliate links: if you buy through them we may earn a commission, at no extra cost to you.
More wind generation could lower ISO New England (ISO‑NE) wholesale energy prices when wind output displaces a more expensive marginal generator. That outcome is neither automatic nor uniform: the effect depends on the hour, the location of the wind, transmission availability, demand, fuel costs, and which other plants are running. Reliability can be maintained, but variable wind requires accurate forecasting, sufficient operating reserves, and transmission that can deliver power from windy areas to load centers.
ISO‑NE’s published data show a system with about 2,500 MW of installed wind capacity and roughly 4,600 GWh of wind generation flowing through the wholesale markets in 2025. Those figures describe the existing system, not a guaranteed result from future projects. A specific estimate for a proposed buildout would require a defined scenario and a power-system model.
As an Amazon Associate I earn from qualifying purchases.
Do these 3 things before closing this tab:
1Fix the driver behind crashes, sound loss and screen glitches2Repair Windows errors before they cause bigger problems3Scan for outdated or missing drivers - takes under a minuteWhat is the current wind baseline in New England?
ISO‑NE reports roughly 2,500 MW of installed wind capacity in the region. Capacity is the maximum nameplate output of the turbines, not the amount of electricity they produce every hour. In 2025, about 4,600 GWh of wind power flowed through New England’s wholesale markets, an energy total accumulated over the year. A wind project’s actual output varies with weather, so annual generation is usually much lower than multiplying nameplate capacity by every hour in the year.
The distinction matters when interpreting claims about “more wind.” Adding 1,000 MW of nameplate capacity does not mean the system receives 1,000 MW continuously. The timing of production determines whether wind is available during high-demand periods, low-demand periods, or hours when transmission paths are constrained. ISO‑NE’s wind integration overview provides the current operating baseline and explains why output, forecasting, and transmission must be considered together.
Popular on Amazon
- 【90 Degree Full Function USB C Adapter】Supports the latest USB4 standard for up to 40Gbps of bandwidth, 8K video support, and up to 240W Fast charging; Support USB PD 3.1 Extended Power Range (EPR) including 140W, 180W and 240W. Your productivity is easily doubled. *Warm Tip: For the best fit, please make sure the USB-C port is fully exposed; thick or bulky cases may affect compatibility.
- 【Reliable Quality】Made from high-quality, scratch-resistant aluminum alloy, delicate metal frame. get excellent wear resistance and heat dissipation. Non-Slip Design for easier insertion and removal.
- 【Small and portable】Ultra thin size, ultra compact design, a petite physique that matches the minimalist design of your modern laptops. Coming with a slim figure that won't block the port next to the one it's plugged into.
- 【Compatibility】Widely work with most usb c, thunderbolt 4/3 devices. Compatibilit for ROG Ally, Steam Deck, Switch, MacBook Pro, Quest 3 VR headset, Surface Book 2, iPhone 18/17/16/15, Samsung Galaxy S23/S22/S21, Note 20/10, Google Pixel, ChromeBook, etc.
- 【Excellence Customer Support】If you experience any issues or cable failure, simply reach out to our dedicated customer service team. We provide a prompt response within 18 hours, providing you with the necessary technical support to resolve any concerns.
Is the interconnection queue a forecast of future wind?
No. The interconnection queue is a list of proposed projects and requests, not a construction schedule or a forecast of what will be operating. ISO‑NE’s integration materials show wind representing 44% of roughly 14,000 MW of proposed energy capacity. The January 2026 state-profile material likewise identifies wind as a major share of the queue while cautioning that requests can be filed, withdrawn, revised, or completed at different times.
Queue megawatts therefore indicate developer interest and potential network requirements. They should not be added directly to today’s installed capacity to predict future generation. A credible outlook must specify which projects reach commercial operation, their locations and turbine technology, expected production profiles, transmission upgrades, retirements of other generators, and changes in demand.
Outdated Drivers Are Slowing You Down
One free scan finds every outdated or missing driver and matches the right update for your exact hardware.Free scan · exact hardware matchPC Slower Than It Used to Be?
A free scan shows the junk files, broken settings and background clutter dragging Windows down - then fixes them in one click.Free scan · Windows 10 & 11How does additional wind affect ISO‑NE wholesale prices?
In ISO‑NE’s energy markets, the marginal resource—the last generator needed to meet demand under the system’s operating constraints—sets the clearing price for energy in a location and interval. Wind has very low short-run fuel cost, so when it is producing and can reach load, it can reduce the need to run a higher-cost marginal unit. The resulting clearing price may fall for that hour or location.
ISO‑NE explains the market process in How Resources Are Selected and Prices Are Set. The page also emphasizes that prices vary by time and location and reflect fuel costs, demand, transmission limits, and losses. Consequently, there is no universal rule such as “each additional megawatt of wind lowers the price by a fixed amount.”
When the price effect is strongest
- Wind output coincides with demand. If turbines are producing during a period when demand would otherwise require an expensive generator, displacement pressure is larger.
- The wind can reach the load. A project connected to an unconstrained transmission path can influence more of the system than one behind a bottleneck.
- Fuel prices are high. When gas or another marginal fuel is expensive, replacing that unit can produce a larger energy-price difference.
- Other low-cost resources are not already setting the margin. If hydro, nuclear, or another low-cost resource is already marginal, adding wind may have a smaller incremental effect.
Why the effect can be small or localized
Transmission congestion can separate a windy area from demand centers. In that situation, local prices may diverge, and additional wind may be curtailed or have a stronger effect only within the constrained area. Wind output can also arrive during hours of modest demand, when the marginal unit is already relatively inexpensive. Demand growth, generator retirements, imports, and fuel-market conditions can all offset or amplify wind’s influence.
Also popular on Amazon
- 5-in-1 Connectivity: Equipped with a 4K HDMI port, a 5 Gbps USB-C data port, two 5 Gbps USB-A ports, and a USB C 100W PD-IN port. Note: The USB C 100W PD-IN port supports only charging and does not support data transfer devices such as headphones or speakers.
- Powerful Pass-Through Charging: Supports up to 85W pass-through charging so you can power up your laptop while you use the hub. Note: Pass-through charging requires a charger (not included). Note: To achieve full power for iPad, we recommend using a 45W wall charger.
- Transfer Files in Seconds: Move files to and from your laptop at speeds of up to 5 Gbps via the USB-C and USB-A data ports. Note: The USB C 5Gbps Data port does not support video output.
- HD Display: Connect to the HDMI port to stream or mirror content to an external monitor in resolutions of up to 4K@30Hz. Note: The USB-C ports do not support video output.
- What You Get: Anker 332 USB-C Hub (5-in-1), welcome guide, our worry-free 18-month warranty, and friendly customer service.
ISO‑NE reports that natural gas supplied 54% of electricity produced by regional power plants in 2025. That fuel share helps explain why gas prices and gas-plant availability remain important to electricity prices, even as renewable output grows. The same ISO‑NE markets summary reports a 2025 average real-time wholesale price of $65.88 per megawatt-hour (MWh), but that is a historical region-wide average—not a price caused by wind and not a forecast for a future buildout.
What’s actually slowing this PC down?
Pick the symptom - the matching free tool is one click away.
Could more wind lower every customer’s electricity bill?
No. Wholesale energy prices and retail electricity rates are different quantities. ISO‑NE’s 2025 figures show wholesale costs ranging from 8.61 to 9.14 cents per kilowatt-hour across New England, while average residential prices ranged from 22.92 to 30.48 cents per kilowatt-hour across the states. Retail bills include distribution, transmission, public-policy programs, utility procurement, taxes, and other regulated components in addition to wholesale supply costs.
A lower wholesale clearing price can reduce one part of a customer’s supply cost, especially where utilities pass through market prices. It does not translate one-for-one into a household-bill reduction. Conversely, transmission investments, renewable contracts, or other policy costs can affect retail rates even if energy prices are lower. Any claim about bill savings must identify the state, rate class, utility procurement method, and time period.
What does more wind mean for reliability?
More wind changes the operator’s task rather than making reliability inherently better or worse. Wind output is weather-dependent and can rise or fall across the region. ISO‑NE manages that variability with forecasts, reserves, dispatch instructions, transmission planning, and other resources that can respond when conditions differ from expectations.
The markets-and-operations overview describes the need to account for renewable variability and reserve capability. Reliability is assessed against the system’s ability to serve demand after contingencies, not simply by counting installed megawatts. A portfolio with more wind can be dependable when it includes adequate flexible resources, transmission, and operating procedures.
Quick wins for a faster PC:
Scan for outdated or missing drivers - takes under a minuteDriver Scan →Clear out junk files and repair common Windows errorsFree Scan →Also popular on Amazon
- Sleek 7-in-1 USB-C Hub: Features an HDMI port, two USB-A 3.0 ports, and a USB-C data port, each providing 5Gbps transfer speeds. It also includes a USB-C PD input port for charging up to 100W and dual SD and TF card slots, all in a compact design.
- Flawless 4K@60Hz Video with HDMI: Delivers exceptional clarity and smoothness with its 4K@60Hz HDMI port, making it ideal for high-definition presentations and entertainment. (Note: Only the HDMI port supports video projection; the USB-C port is for data transfer only.)
- Double Up on Efficiency: The two USB-A 3.0 ports and a USB-C port support a fast 5Gbps data rate, significantly boosting your transfer speeds and improving productivity.
- Fast and Reliable 85W Charging: Offers high-capacity, speedy charging for laptops up to 85W, so you spend less time tethered to an outlet and more time being productive.
- What You Get: Anker USB-C Hub (7-in-1), welcome guide, 18-month warranty, and our friendly customer service.
Forecasting and scheduling
ISO‑NE uses wind forecasts to schedule generation and determine how much reserve to hold. Better forecasts reduce unnecessary commitment of backup units while helping operators prepare for ramps or shortfalls. Forecast error cannot be eliminated, so planning uses uncertainty ranges rather than treating a forecast as guaranteed output.
Reserves and balancing resources
Reserves are resources that can increase output, reduce consumption, or otherwise respond when supply and demand differ from the schedule. The amount and speed of reserve needed depend on the expected wind forecast error, the size of possible ramps, demand conditions, and the availability of other generators. Holding reserves has an operating cost, but it is part of maintaining reliability with variable resources.
Transmission and congestion management
Many high-quality wind sites are distant from major load centers. Without adequate transmission, the system may be unable to deliver all available output, even when regional demand is high. Congestion can force redispatch, create different locational prices, or require curtailment. ISO‑NE’s wind-integration page discusses transmission as a prerequisite for moving power from proposed projects to customers.
Reliability dispatch outside economic merit order
Normal energy dispatch ranks resources economically, but operators can take reliability actions when a constraint or contingency threatens the system. ISO‑NE’s market explainer notes that resources may be dispatched outside economic merit order when needed for reliability. Such actions mean that the lowest apparent energy bid does not always determine which units run; physical security of the grid remains the overriding requirement.
How should wind scenarios be compared?
A meaningful comparison must define the scenario before calculating a price or reliability result. At minimum, specify the following dimensions:
Also popular on Amazon
- Portable and powerful USB-C HUB: BENFEI USB Type-C HUB, with super-soft and knot-free silicone woven design cable, meets most mobile office needs. Compact, lightweight, stylish, and powerful portable USB C Hub equipped with 1 x HDMI port, 1 x 100W charging, and 3 x USB ports. 18-month warranty, 24-hour response, to ensure you feel at ease when using our product.
- Design centered on comfort and reliability: Thanks to BENFEI's end-to-end in-house cable production capability, in-house PCBA and assembly capability, using the industry's most advanced silicone woven design and process, 20cm cable in length, no knots, super-soft, the HUB is easy to use in all scenarios: laptop, tablet, stand etc. Super-soft, 25000+ life cycles, to meet your daily carrying and office needs.
- 100W Charging: Support up to 90W USB C pass-through charging via Type-C port to keep your laptop powered. 10W is reserved for other interface operations. No data and video function on the Type-C port.
- 4K HDMI Display: The HDMI port supports media display at resolutions up to 4K 30Hz, keeping every incredible moment detailed and ultra vivid. Please note that the C port of the Host device needs to support video output.
- Transfer Files in Seconds: Transfer files and from your laptop at speeds up to 10 Gbps with USB A 3.2 port. Extra 2 USB A 2.0 ports are perfectly for your keyboards and mouse.
- Location and transmission access: Identify where the turbines connect, which interfaces carry their output, and what upgrades are assumed.
- Hourly and seasonal production: Use a wind profile that captures lulls, ramps, and seasonal differences rather than an annual average alone.
- Demand assumptions: State load growth, electrification, peak timing, and weather conditions.
- Fuel and generator assumptions: Include gas prices, import availability, retirements, outages, and the operating characteristics of replacement resources.
- Balancing and reserves: Account for forecast uncertainty, reserve requirements, storage or demand response, and the flexibility of remaining generators.
- Metric being measured: Distinguish day-ahead price, real-time price, locational price, capacity-market cost, total wholesale cost, and retail-bill impact.
Changing any one of these inputs can change the conclusion. For example, a project with the same nameplate capacity can have a different price effect depending on whether it is connected near a congested interface or near a major load center, and whether its strongest output occurs during winter peaks or overnight low-load hours.
What can the published ISO‑NE numbers—and cannot—tell us?
The published figures establish a factual baseline: about 2,500 MW of installed wind, approximately 4,600 GWh of 2025 wind generation, and a queue in which wind represented 44% of roughly 14,000 MW of proposed energy capacity. They also show the broader market context, including a $65.88/MWh average real-time price in 2025 and a generation mix in which natural gas supplied 54% of plant production.
Those numbers do not provide a dollar-per-MWh estimate for a specified addition of wind. Nor do they quantify a wind-only reliability effect under a future scenario. Producing either estimate requires chronological dispatch and production-cost modeling, transmission constraints, reserve rules, demand and fuel assumptions, and decisions about retirements and new resources. Treating the queue or the annual generation total as a forecast would overstate what the data support.
The Tool Desk
Outbyte Driver Updater FREEScan for outdated or missing drivers - takes under a minuteDriver Scan →Outbyte PC Repair FREEClear out junk files and repair common Windows errorsFree Scan →What should policymakers and planners watch next?
Four indicators are especially useful. First, track whether queued projects advance through interconnection studies and construction rather than counting every request as committed capacity. Second, examine transmission projects and interface capability, because deliverability often determines whether theoretical wind output can serve regional load. Third, monitor forecast performance, reserve needs, and curtailment as new projects begin operating. Fourth, separate energy-market outcomes from capacity adequacy and from retail-rate impacts.
ISO‑NE’s New England State Profiles and its wind-integration materials are useful for following queue changes and state-specific context. Market statistics should be read alongside those operational details, not as a standalone forecast.
Also popular on Amazon
- 【Read before You Buy】 Note: This adapter is USB 2.0 version and cannot transmit HDM, VGA, or other video signals. Nevertheless, they are fully capable of charging devices,duplicating files, and can be seamlessly integrated with USB-C earphones, wireless network adapters, and SD card adapters.
- 【Easy to Use and Safe】Thanks to modern manufacturing techniques, we've made these adapters sufficiently compact so that they can remain inserted in your device without noticeable protrusion or inconvenience. This means you don't have to constantly plug and unplug them, reducing the likelihood of wear and misalignment, and making them more convenient to carry around.
- 【Reliable Quality】Engineered for enhanced durability, durable aluminum alloy shell material,get excellent wear resistance and heat dissipation,the male USB C and female USB connectors & the male USB and female USB C connectors are designed to be plugged and unplugged up to 20000 times. Provides data transfer, device charging, memory space expansion, and additional computer peripherals.
- 【Think more for you】Do you need to connect a USB-C-enabled device to an odd device that only has USB-A ports? Then these USB-A male to USB-C female adapters are made for you.Simply insert the adapter into the USB-A port on the device, and you can instantly connect your USB-C device to the device that originally didn't have the correct connection port.
- 【Trusted xiwxi Quality and Service】As a responsible brand seller, you will receive xiwxi's 12-month Quality assurance and lifetime friendly customer service, you're not just buying a product,you're investing in peace of mind with all-round quality and exceptional customer service.
Bottom line: what does more wind mean for ISO‑NE?
Additional wind is likely to put downward pressure on wholesale energy prices in hours when it produces, can be delivered, and displaces a higher-cost marginal generator. The size and location of that effect depend on demand, fuel prices, transmission constraints, and the rest of the resource mix. Reliability can be preserved through forecasting, reserves, flexible resources, and transmission, but the queue alone cannot prove a future price or reliability outcome. A defensible answer for any specific wind buildout requires a scenario with explicit assumptions and system modeling.
Frequently Asked Questions
Does wind generation always lower ISO‑NE prices?
No. Wind can lower the clearing price when it displaces a costlier marginal unit, but congestion, low demand, losses, and the availability of other low-cost generators can limit or localize the effect. Prices may respond differently at different nodes and in different hours.
Why is wind capacity different from wind generation?
Capacity is the turbines’ maximum instantaneous output, measured in megawatts. Generation is the electricity actually produced over time, measured in megawatt-hours or gigawatt-hours, and it varies with wind conditions and curtailment.
Will more wind eliminate the need for natural-gas power plants?
Not by itself. Gas units may still provide energy during low-wind periods, ramping capability, reserves, or local reliability support. The future role of gas depends on demand, retirements, storage, transmission, fuel prices, and market rules.
What data is needed to estimate the effect of a proposed wind project?
A credible estimate needs the project’s location and hourly output profile, transmission and congestion assumptions, demand and weather cases, fuel prices, generator availability and retirements, reserve requirements, and the price metric being evaluated. Without those inputs, a single dollar-per-MWh or reliability number would be speculative.

