Some links on this page are affiliate links: if you buy through them we may earn a commission, at no extra cost to you.
The Hisense PX4 Pro does not require a special screen to project an image, but Hisense recommends its Ambient-Resisting Screen (an ALR screen) for the best automatic geometric correction. You can use a lighter-colored wall instead. The projector is designed for 80- to 200-inch images, and the required placement changes with image size: in the PX4 Pro instructions, dimension A is 177 mm for a 100-inch image and 600 mm for a 200-inch image. Use the model-specific table and diagram rather than a generic ultra-short-throw rule.
The ALR screen is sold separately, and actual image size can vary with room and installation conditions. The figures below come from Hisense’s product information and PX4 Pro instructions, not an independent measurement.
As an Amazon Associate I earn from qualifying purchases.
Do these 3 things before closing this tab:
1Repair Windows errors before they cause bigger problems2Scan for outdated or missing drivers - takes under a minute3Clear out junk files and repair common Windows errorsDoes the Hisense PX4 Pro need a special screen?
No. Hisense does not state that a special screen is mandatory for projection. The PX4 Pro instructions describe a lighter-colored wall as an available setup surface, so a suitable painted wall can work. Hisense does, however, say screen type has a significant effect on automatic geometric correction and strongly recommends its Ambient-Resisting Screen for optimal results (PX4 Pro instructions).
That distinction matters. “Can project without a special screen” does not mean every wall or ordinary screen will produce the same alignment behavior. A dark wall, a strongly textured surface, objects in front of the image, or bright room lighting can interfere with the projector’s automatic correction. If you use a wall, keep it as light, smooth and unobstructed as possible.
Popular on Amazon
- 【90 Degree Full Function USB C Adapter】Supports the latest USB4 standard for up to 40Gbps of bandwidth, 8K video support, and up to 240W Fast charging; Support USB PD 3.1 Extended Power Range (EPR) including 140W, 180W and 240W. Your productivity is easily doubled. *Warm Tip: For the best fit, please make sure the USB-C port is fully exposed; thick or bulky cases may affect compatibility.
- 【Reliable Quality】Made from high-quality, scratch-resistant aluminum alloy, delicate metal frame. get excellent wear resistance and heat dissipation. Non-Slip Design for easier insertion and removal.
- 【Small and portable】Ultra thin size, ultra compact design, a petite physique that matches the minimalist design of your modern laptops. Coming with a slim figure that won't block the port next to the one it's plugged into.
- 【Compatibility】Widely work with most usb c, thunderbolt 4/3 devices. Compatibilit for ROG Ally, Steam Deck, Switch, MacBook Pro, Quest 3 VR headset, Surface Book 2, iPhone 18/17/16/15, Samsung Galaxy S23/S22/S21, Note 20/10, Google Pixel, ChromeBook, etc.
- 【Excellence Customer Support】If you experience any issues or cable failure, simply reach out to our dedicated customer service team. We provide a prompt response within 18 hours, providing you with the necessary technical support to resolve any concerns.
Hisense’s Singapore product page identifies the ALR screen as not included with the projector (Hisense Singapore PX4 Pro specifications). Treat an ALR screen as an optional accessory that can make a difficult living room easier to align and view, not as a compulsory component of the projector.
Why does Hisense recommend an Ambient-Resisting Screen?
Ultra-short-throw projectors send light upward at a steep angle over a very short distance. The screen surface therefore affects both reflected light and the camera-based geometry checks used during setup. Hisense’s manual states: “Since screen type significantly impacts the performance of automatic geometric correction, we strongly recommend using the Hisense Ambient-Resisting Screen for optimal results.”
Quick wins for a faster PC:
Clear out junk files and repair common Windows errorsFree Scan →Scan for outdated or missing drivers - takes under a minuteDriver Scan →Repair Windows errors before they cause bigger problemsFix Now →That is a recommendation for the correction system, not a published claim that projection is impossible on another surface. The supplied documentation does not provide a compatibility list for third-party ALR screens, so do not assume that every product marketed as ALR will behave identically. If you choose another screen, verify that it is intended for ultra-short-throw projection, has a flat surface, matches your target diagonal, and leaves the projector’s alignment features unobstructed.
How close to the wall should the PX4 Pro sit?
Use the PX4 Pro’s own placement diagram and table. The manual labels two installation measurements, A and B, alongside the projected image width (X) and height (Y). Dimension A increases as the target image gets larger: it is 92 mm at 80 inches, 177 mm at 100 inches, 261 mm at 120 inches, and 600 mm at 200 inches. Do not relabel A as a particular rear-edge gap unless you are looking at the diagram, because the table alone does not establish the measurement endpoints.
These are manufacturer placement dimensions. Hisense cautions that the resulting image size can differ with the actual installation environment, so use the numbers as a starting position and then align the image on the intended screen or wall.
Also popular on Amazon
- 5-in-1 Connectivity: Equipped with a 4K HDMI port, a 5 Gbps USB-C data port, two 5 Gbps USB-A ports, and a USB C 100W PD-IN port. Note: The USB C 100W PD-IN port supports only charging and does not support data transfer devices such as headphones or speakers.
- Powerful Pass-Through Charging: Supports up to 85W pass-through charging so you can power up your laptop while you use the hub. Note: Pass-through charging requires a charger (not included). Note: To achieve full power for iPad, we recommend using a 45W wall charger.
- Transfer Files in Seconds: Move files to and from your laptop at speeds of up to 5 Gbps via the USB-C and USB-A data ports. Note: The USB C 5Gbps Data port does not support video output.
- HD Display: Connect to the HDMI port to stream or mirror content to an external monitor in resolutions of up to 4K@30Hz. Note: The USB-C ports do not support video output.
- What You Get: Anker 332 USB-C Hub (5-in-1), welcome guide, our worry-free 18-month warranty, and friendly customer service.
| Image diagonal | Image width X | Image height Y | Dimension A | Dimension B |
|---|---|---|---|---|
| 80 in | 1771 mm | 996 mm | 92 mm | 320 mm |
| 90 in | 1993 mm | 1121 mm | 135 mm | 350 mm |
| 100 in | 2214 mm | 1245 mm | 177 mm | 380 mm |
| 110 in | 2435 mm | 1370 mm | 219 mm | 410 mm |
| 120 in | 2657 mm | 1494 mm | 261 mm | 440 mm |
| 130 in | 2878 mm | 1619 mm | 304 mm | 470 mm |
| 140 in | 3100 mm | 1743 mm | 346 mm | 500 mm |
| 150 in | 3321 mm | 1868 mm | 388 mm | 530 mm |
| 160 in | 3542 mm | 1992 mm | 431 mm | 559 mm |
| 170 in | 3764 mm | 2117 mm | 473 mm | 589 mm |
| 180 in | 3985 mm | 2241 mm | 515 mm | 619 mm |
| 190 in | 4207 mm | 2366 mm | 557 mm | 649 mm |
| 200 in | 4428 mm | 2490 mm | 600 mm | 679 mm |
All measurements are from the PX4 Pro instructions. Hisense says actual results may vary according to installation conditions. Keep the manual’s A/B labels and diagram with these figures.
Crashes, No Sound, or Screen Glitches?
Random freezes, missing sound and display glitches usually trace back to one bad driver. Find and replace yours safely.Free scan · under a minutePC Slower Than It Used to Be?
A free scan shows the junk files, broken settings and background clutter dragging Windows down - then fixes them in one click.Free scan · Windows 10 & 11What does the PX4 Pro’s 0.2 throw ratio mean?
Hisense lists a 0.2 throw ratio and an 80- to 200-inch projection range for the PX4 Pro on its regional product pages, including Hisense Canada’s PX4 Pro listing. In practical terms, a very short throw ratio is why the unit can produce a large picture from a position close to the wall. It does not replace the model-specific A/B table: the ratio is a general optical specification, while the table tells you how Hisense lays out particular image sizes.
The listed range covers 80, 90, 100, 110, 120, 130, 140, 150, 160, 170, 180, 190 and 200 inches in the instructions. Choose the diagonal that fits your wall or screen first, then position the projector using the corresponding row.
Which image sizes support automatic geometric correction?
The instructions state that automatic geometric correction is available only for 100- and 120-inch screens. Hisense’s product description similarly describes automatic screen alignment up to 120 inches. For other sizes in the 80- to 200-inch projection range, expect to position the chassis carefully and use manual adjustment if the automatic process is unavailable or unsuitable.
Even at 100 or 120 inches, automatic correction needs a favorable scene. The manual says to remove obstructions between the projector and screen, clear foreign objects from the screen surface, use a lighter-colored wall, and minimize ambient light. Dark-colored walls and strong lighting can prevent the system from finding a satisfactory geometry.
Also popular on Amazon
- Sleek 7-in-1 USB-C Hub: Features an HDMI port, two USB-A 3.0 ports, and a USB-C data port, each providing 5Gbps transfer speeds. It also includes a USB-C PD input port for charging up to 100W and dual SD and TF card slots, all in a compact design.
- Flawless 4K@60Hz Video with HDMI: Delivers exceptional clarity and smoothness with its 4K@60Hz HDMI port, making it ideal for high-definition presentations and entertainment. (Note: Only the HDMI port supports video projection; the USB-C port is for data transfer only.)
- Double Up on Efficiency: The two USB-A 3.0 ports and a USB-C port support a fast 5Gbps data rate, significantly boosting your transfer speeds and improving productivity.
- Fast and Reliable 85W Charging: Offers high-capacity, speedy charging for laptops up to 85W, so you spend less time tethered to an outlet and more time being productive.
- What You Get: Anker USB-C Hub (7-in-1), welcome guide, 18-month warranty, and our friendly customer service.
How do I set up the PX4 Pro on a wall or screen?
Have the target surface installed or marked, a level support for the projector, and enough clearance to move the unit by small increments. For a fixed screen, confirm its diagonal and usable image area before you place the projector. Then follow this sequence:
- Select the target size. Pick a diagonal within the manufacturer’s 80- to 200-inch range. Locate that diagonal in the placement table and note X, Y, A and B.
- Read the printed diagram. Identify exactly where the manual measures A and B. Do not measure from an assumed back edge or from a cabinet feature that is not the diagram’s reference point.
- Prepare the surface. Remove decorations, shelves, cables or other objects that enter the projected rectangle. A light, neutral, smooth wall is preferable when you are not using a screen.
- Place the projector approximately. Set it on a rigid, level surface and use the selected row as your initial location. Leave room for small forward, backward and side-to-side adjustments.
- Reduce competing light. Close blinds or curtains and turn off lights aimed at the wall. This is especially important when you want the automatic correction system to identify the screen boundary.
- Run alignment or geometric correction. For a 100- or 120-inch target, try the automatic function with the screen unobstructed. Check every corner and the border rather than accepting a partially clipped image.
- Fine-tune physically first. Move the projector in small increments to make the image rectangular and fill the intended area. Physical placement preserves more image area than relying on aggressive digital correction.
- Apply manual correction if needed. If the automatic result is unsatisfactory, follow the projector’s manual adjustment controls. Recheck focus, corners and the screen border after each change.
What should I check before buying an ALR screen?
Start with the projector’s target diagonal and the room’s lighting, then verify the screen’s construction rather than choosing by the ALR label alone. A suitable screen should be designed for ultra-short-throw projection, remain flat across its entire viewing area, and frame the PX4 Pro’s selected X and Y dimensions without forcing an image crop.
- UST geometry: The surface must be engineered for the steep upward light path of a UST projector.
- Size and framing: Match the diagonal and aspect ratio to the image area you intend to use. Leave enough border to make alignment visible.
- Ambient-light handling: An ambient-resisting surface can help in a bright room, but it cannot eliminate all effects of windows or lamps.
- Flatness: Waves or sagging can make a geometrically correct image look distorted and can confuse edge detection.
- Alignment access: The screen should not have objects, trim or accessories intruding into the projected rectangle.
Hisense specifically names its own Ambient-Resisting Screen but does not validate particular third-party models in the supplied material. Check the screen maker’s UST compatibility information and return policy before committing to a different model.
Can a painted wall work well enough?
Yes, if the wall is light-colored, reasonably smooth and free of objects. A wall avoids the cost and installation work of a fixed screen, and it is a sensible way to confirm the desired image size before purchasing an accessory. Its limitations are uneven paint, visible texture, reflections from nearby surfaces and poorer control of ambient light.
The Tool Desk
Outbyte Driver Updater FREEFix the driver behind crashes, sound loss and screen glitchesFind Drivers →Outbyte PC Repair FREEClear out junk files and repair common Windows errorsFree Scan →If the wall is dark or heavily textured, automatic correction may be unreliable and the picture may look uneven. In that situation, a properly installed UST ALR screen is the more predictable choice. The projector can still display an image on the wall, but the setup may require more physical positioning and manual correction.
Also popular on Amazon
- Portable and powerful USB-C HUB: BENFEI USB Type-C HUB, with super-soft and knot-free silicone woven design cable, meets most mobile office needs. Compact, lightweight, stylish, and powerful portable USB C Hub equipped with 1 x HDMI port, 1 x 100W charging, and 3 x USB ports. 18-month warranty, 24-hour response, to ensure you feel at ease when using our product.
- Design centered on comfort and reliability: Thanks to BENFEI's end-to-end in-house cable production capability, in-house PCBA and assembly capability, using the industry's most advanced silicone woven design and process, 20cm cable in length, no knots, super-soft, the HUB is easy to use in all scenarios: laptop, tablet, stand etc. Super-soft, 25000+ life cycles, to meet your daily carrying and office needs.
- 100W Charging: Support up to 90W USB C pass-through charging via Type-C port to keep your laptop powered. 10W is reserved for other interface operations. No data and video function on the Type-C port.
- 4K HDMI Display: The HDMI port supports media display at resolutions up to 4K 30Hz, keeping every incredible moment detailed and ultra vivid. Please note that the C port of the Host device needs to support video output.
- Transfer Files in Seconds: Transfer files and from your laptop at speeds up to 10 Gbps with USB A 3.2 port. Extra 2 USB A 2.0 ports are perfectly for your keyboards and mouse.
What problems occur when the projector is too close or too far?
If the unit is too close for the selected diagonal, the image can be smaller than the screen or fail to fill its frame. Moving it farther away generally increases the image, but the table’s A and B references must be followed so you do not trade one alignment problem for another. If it is too far, the image can exceed the screen, reach the ceiling or side walls, or require digital reduction.
A tilted support, an uneven wall or a screen that is not level can create trapezoidal edges even when the distance is correct. Correct the physical cause first: level the furniture, square the screen and center the projector. Use digital geometry only for the remaining small error, particularly when image quality and full resolution matter.
Independent reader supportYour contribution helps us test, update, and keep practical guides available for everyone.Does room lighting change the recommended distance?
Lighting does not change the numerical A/B entries, but it can change whether automatic detection succeeds and how usable the image appears. The manual specifically warns that strong ambient light can interfere with automatic geometric correction, while dark walls can also cause problems. Control light during setup and evaluate the image with the room in its normal viewing condition.
What’s actually slowing this PC down?
Pick the symptom - the matching free tool is one click away.
The Singapore product page lists 3,500 ANSI lumens and 6,500:1 iris contrast as product specifications, but those figures do not remove the need for a suitable surface or controlled lighting. They are manufacturer specifications, not a guarantee of a particular result in every room.
What is the practical answer for a typical 100-inch installation?
For a 100-inch target, the manual lists an image area of 2214 mm wide by 1245 mm high, dimension A of 177 mm and dimension B of 380 mm. Use the diagram to measure those dimensions from the correct reference points, place the projector on a level support, and leave adjustment room. If you are using automatic correction, 100 inches is one of the two sizes for which the manual explicitly lists that function.
Also popular on Amazon
- 【Read before You Buy】 Note: This adapter is USB 2.0 version and cannot transmit HDM, VGA, or other video signals. Nevertheless, they are fully capable of charging devices,duplicating files, and can be seamlessly integrated with USB-C earphones, wireless network adapters, and SD card adapters.
- 【Easy to Use and Safe】Thanks to modern manufacturing techniques, we've made these adapters sufficiently compact so that they can remain inserted in your device without noticeable protrusion or inconvenience. This means you don't have to constantly plug and unplug them, reducing the likelihood of wear and misalignment, and making them more convenient to carry around.
- 【Reliable Quality】Engineered for enhanced durability, durable aluminum alloy shell material,get excellent wear resistance and heat dissipation,the male USB C and female USB connectors & the male USB and female USB C connectors are designed to be plugged and unplugged up to 20000 times. Provides data transfer, device charging, memory space expansion, and additional computer peripherals.
- 【Think more for you】Do you need to connect a USB-C-enabled device to an odd device that only has USB-A ports? Then these USB-A male to USB-C female adapters are made for you.Simply insert the adapter into the USB-A port on the device, and you can instantly connect your USB-C device to the device that originally didn't have the correct connection port.
- 【Trusted xiwxi Quality and Service】As a responsible brand seller, you will receive xiwxi's 12-month Quality assurance and lifetime friendly customer service, you're not just buying a product,you're investing in peace of mind with all-round quality and exceptional customer service.
For a 200-inch target, the listed image area is 4428 mm by 2490 mm, with A at 600 mm and B at 679 mm. That is a much larger installation, so verify wall width, ceiling clearance and screen framing before mounting anything. Automatic correction is not listed for 200 inches; plan on careful physical alignment and possible manual adjustment.
Bottom line: screen or wall, and what distance?
The PX4 Pro can project onto a suitable light-colored wall, so a special screen is not a hard requirement. Hisense recommends its Ambient-Resisting Screen for optimal automatic geometric correction, and that accessory is not included. For distance, select your image diagonal, read the matching A and B values in the PX4 Pro instructions, and use the diagram’s endpoints rather than guessing from the projector’s rear edge. Treat the table as a starting specification, because room and installation conditions can change the final image size.
Free tools Windows power users keep installed
One-click scans. No signup required.
Frequently Asked Questions
Can I use a fixed-frame screen with the PX4 Pro?
A fixed frame can be appropriate if its surface is designed for ultra-short-throw projection and remains flat. Confirm the frame does not intrude into the projected rectangle and that its usable area matches the PX4 Pro’s intended diagonal.
Will keystone correction let me ignore the placement table?
No. Digital correction can disguise a small positioning error, but it cannot make an incorrectly sized screen or a badly tilted installation ideal. Start with the A/B placement guidance and use manual correction only for residual geometry.
Is the 200-inch mode suitable for every room?
The projector’s published range reaches 200 inches, but that size requires an image about 4428 mm wide and 2490 mm high. Measure the available wall, ceiling and viewing area before choosing it, and remember that automatic correction is not listed for that size.
Why does the image look uneven on my wall?
Surface texture, paint variation, waves, nearby light and objects in the image path can all contribute. Test with the wall cleared and lighting reduced; if the surface itself is irregular, a flat UST-compatible screen is the more controllable fix.

