Thanksgiving DealsAmazon USThanksgiving week: Black Friday picks start earlyAmazon US: current deals, useful picks and tech finds.Check DealsClean PCRecommendedOne scan can reveal what keeps slowing WindowsLook for cleanup and repair opportunities.Run ScanThanksgiving DealsAmazon USDo not wait for the rush - compare today's dealsAmazon US: current deals, useful picks and tech finds.See Picks×
FREEDOM251

Freedom251 › Blog

Fixing 3D X‑ray Reconstruction Artifacts and Vanishing Features: A Diagnostic Workflow

By Freedom251 Team · · 11 min read

Special offer. See more information about Outbyte and uninstall instructions. Please review EULA and Privacy policy.

Some links on this page are affiliate links: if you buy through them we may earn a commission, at no extra cost to you.

3D X‑ray reconstruction artifacts and missing features are usually traced to one of five stages: acquisition coverage, calibration and geometry, signal and resolution, reconstruction, or 3D postprocessing. Start by checking the original projections and reconstructed slices; only then change segmentation or rendering settings. If a structure was outside the field of view or never measured, a display threshold cannot restore it. If it is visible in slices but absent from a model, the problem is usually segmentation, opacity, or rendering.

This workflow applies the shared physics of clinical CT, C‑arm CBCT, dental CBCT, industrial CT, and laboratory micro‑CT, while recognizing that controls and safety procedures differ. Use the operating manual and qualified technical or clinical support for the exact scanner and protocol.

As an Amazon Associate I earn from qualifying purchases.

What’s actually slowing this PC down?

Pick the symptom - the matching free tool is one click away.

Special offer. See more information about Outbyte and uninstall instructions. Please review EULA and Privacy policy.

What should I check first when a 3D reconstruction looks wrong?

Locate the first stage at which the target feature disappears. Examine projection data when available, then axial, coronal, and sagittal slices, and only afterward the surface or volume rendering. This prevents a visualization setting from being mistaken for an acquisition failure.

  1. Check acquisition coverage. Confirm that the object or anatomy stayed inside the field of view (FOV) throughout rotation and that the angular scan completed. A portion rotating outside the FOV produces missing measurements that no threshold or renderer can recreate. The SkyScan 1276 workflow describes this limitation for micro‑CT.
  2. Inspect source slices. If the feature is visible in slices, the data contain at least some evidence of it. If it is absent from every slice and from projections, investigate coverage, penetration, motion, and resolution before postprocessing.
  3. Separate image data from the 3D display. A surface model can omit low-contrast or thin structures that remain visible in slices. Check segmentation thresholds, class labels, opacity, clipping planes, and the selected rendering mode.
  4. Assess detectability. Displayed voxel dimensions are sampling intervals, not a guarantee of spatial resolution. Focal-spot size, detector response, magnification, reconstruction kernel, noise, and contrast all influence whether a feature can be resolved.
  5. Match the artifact pattern to likely causes. Rings, shading, streaks, blur, truncation, and cone-beam effects provide clues, but none is a unique diagnosis. Confirm with calibration checks, a phantom or known feature, and repeat reconstructions from the same data where possible.

Keep the original projections, calibration files, reconstruction parameters, and unprocessed volume. Make one controlled change at a time so a visual improvement can be distinguished from a change that merely hides the target.

Popular on Amazon
Sale
Silkland 40Gbps USB C 90 Degree Right Angle Adapter 2 Pack, 240W USB4 | Male to Female Extender, 8K@60Hz, Thunderbolt 4/3, Steam Deck, ROG Ally, MacBook, Switch 2, iPhone 18/17/16/15, Quest 3 VR
  • 【90 Degree Full Function USB C Adapter】Supports the latest USB4 standard for up to 40Gbps of bandwidth, 8K video support, and up to 240W Fast charging; Support USB PD 3.1 Extended Power Range (EPR) including 140W, 180W and 240W. Your productivity is easily doubled. *Warm Tip: For the best fit, please make sure the USB-C port is fully exposed; thick or bulky cases may affect compatibility.
  • 【Reliable Quality】Made from high-quality, scratch-resistant aluminum alloy, delicate metal frame. get excellent wear resistance and heat dissipation. Non-Slip Design for easier insertion and removal.
  • 【Small and portable】Ultra thin size, ultra compact design, a petite physique that matches the minimalist design of your modern laptops. Coming with a slim figure that won't block the port next to the one it's plugged into.
  • 【Compatibility】Widely work with most usb c, thunderbolt 4/3 devices. Compatibilit for ROG Ally, Steam Deck, Switch, MacBook Pro, Quest 3 VR headset, Surface Book 2, iPhone 18/17/16/15, Samsung Galaxy S23/S22/S21, Note 20/10, Google Pixel, ChromeBook, etc.
  • 【Excellence Customer Support】If you experience any issues or cable failure, simply reach out to our dedicated customer service team. We provide a prompt response within 18 hours, providing you with the necessary technical support to resolve any concerns.

How do I tell whether a feature was never acquired or only hidden?

Compare three representations in order: projections, reconstructed slices, and the 3D rendering. The earliest representation lacking the feature identifies the stage that needs investigation.

Feature absent from projections or outside the FOV

Missing projection measurements cannot be recovered in reconstruction. Check patient or sample positioning, detector collimation, the rotation radius, and any offset or region-of-interest mode. In a circular scan, an edge that leaves the detector during part of the rotation may produce truncation and unreliable values near the boundary. Repositioning or resizing the region is usually preferable to trying to repair the volume afterward.

Special offer. See more information about Outbyte and uninstall instructions. Please review EULA and Privacy policy.

Feature present in slices but absent from the model

Inspect the voxel values around the feature and lower or otherwise adjust the segmentation threshold in a controlled copy. Check whether a connected-component filter removed a small island, whether smoothing eroded a thin wall, and whether opacity or clipping hides the structure. The ASRT CT curriculum identifies threshold selection, opacity settings, and segmentation misrepresentation as 3D postprocessing error categories.

Feature present only as a faint or noisy signal

A low-contrast structure may be physically recorded but not reliably distinguishable from noise. Compare it with a known-size resolution target or another feature of similar contrast. Increasing display contrast can make noise look like detail; it does not increase the scanner’s information.

What do rings, shading, and streaks usually mean?

Artifact geometry narrows the search, but calibration and acquisition records are needed to confirm a cause.

Visible symptom Likely causes to investigate Checks and supported corrections
Concentric or partial rings Detector offset, gain, defective elements, response drift, or offset acquisition geometry Run the scanner’s calibration or checkup procedure; repeat it when the manual calls for it. Test a phantom or another scan to see whether rings persist. Avoid aggressive ring-removal filters near real circular or tangential structures, which can erase them.
Cupping, broad shading, or dark/bright streaks through dense regions Beam hardening, photon starvation, scatter, metal, or insufficient penetration Review transmission in the projections. Use only manufacturer-supported filtration, beam-hardening correction, scatter correction, or metal-artifact reduction. Recheck measured values because these corrections can change them.
Streaks around metal High attenuation causing beam hardening and photon starvation Remove or reposition removable metal when appropriate; consider a different orientation or a validated metal-artifact method. Clinical users should follow the approved protocol and professional guidance.
Blur, doubled edges, or motion-like distortion Patient or sample movement, stage instability, collision-related geometry change, or calibration mismatch Stabilize a laboratory sample and verify stage alignment. For clinical imaging, use the scanner’s motion-management procedure. Check geometric calibration after service, a collision, or a mechanical change.
Cut-off edges or missing peripheral anatomy Truncation, FOV limits, or incomplete angular acquisition Reposition, resize the FOV, or use a supported offset/truncation mode. CBCT truncation correction is approximate and can leave edge and voxel-value errors.
Small displayed voxels but no fine detail Feature below true spatial resolution, low contrast, inadequate signal-to-noise ratio, or too few projections Image a known feature or resolution target. Adjust magnification, exposure, and projection sampling only within scanner limits, balancing noise and scan time.
Fine detail disappears after segmentation Threshold, smoothing, connectivity, opacity, or rendering choices Return to source slices, preserve the original volume, and validate the segmentation before exporting measurements.
Loss of definition away from the central plane in circular-orbit CBCT Incomplete cone-beam sampling Inspect coronal and sagittal views and interpret off-plane structures cautiously. A display adjustment cannot fully remove a trajectory-dependent artifact.

For a clinical CT example, the SOMATOM Force instructions state, in their calibration section, “Calibrate the system as part of the checkup. Repeat calibration if ring artifacts occur.” The same manual notes that beam-hardening correction can reduce, but not necessarily eliminate, the artifact. These are model-specific instructions, not universal controls.

Special offer. See more information about Outbyte and uninstall instructions. Please review EULA and Privacy policy.
Also popular on Amazon
Sale
Anker USB C Hub, 5-in-1 USBC to HDMI Splitter with 4K Display | 85W Max PD, 1 Powered USB-C 5Gbps & 2 Powered USB-A 3.0 5Gbps Data Ports, for MacBook Pro, MacBook Air, Dell and More (Black)
  • 5-in-1 Connectivity: Equipped with a 4K HDMI port, a 5 Gbps USB-C data port, two 5 Gbps USB-A ports, and a USB C 100W PD-IN port. Note: The USB C 100W PD-IN port supports only charging and does not support data transfer devices such as headphones or speakers.
  • Powerful Pass-Through Charging: Supports up to 85W pass-through charging so you can power up your laptop while you use the hub. Note: Pass-through charging requires a charger (not included). Note: To achieve full power for iPad, we recommend using a 45W wall charger.
  • Transfer Files in Seconds: Move files to and from your laptop at speeds of up to 5 Gbps via the USB-C and USB-A data ports. Note: The USB C 5Gbps Data port does not support video output.
  • HD Display: Connect to the HDMI port to stream or mirror content to an external monitor in resolutions of up to 4K@30Hz. Note: The USB-C ports do not support video output.
  • What You Get: Anker 332 USB-C Hub (5-in-1), welcome guide, our worry-free 18-month warranty, and friendly customer service.

How do I correct ring artifacts?

Begin with detector calibration, not a postprocessing filter. Rings that remain at the same radius across slices usually indicate a detector-response or calibration problem.

  1. Record the scan ID, detector mode, calibration date, and reconstruction settings.
  2. Run the scanner’s prescribed offset, gain, bad-pixel, or detector checkup with no object or with the specified calibration phantom.
  3. Repeat a short quality-control acquisition if the procedure permits it and compare the raw or reconstructed pattern.
  4. Reconstruct the original projections with the updated calibration, keeping an uncorrected copy for comparison.
  5. Check whether a ring-removal algorithm changes real circular features, vessel walls, pores, or cylindrical edges. If it does, reduce the correction or document that those structures are no longer quantitatively trustworthy.

Detector response can vary with temperature, exposure history, detector mode, or hardware service. A ring that appears only in one scan may be acquisition-specific; one that repeats in a phantom warrants technical support.

How do I reduce beam-hardening, metal, and photon-starvation artifacts?

These artifacts arise when low-energy photons are preferentially absorbed or too few photons reach the detector. The remedy is usually an acquisition or validated reconstruction change, not a cosmetic adjustment.

  • Check penetration first. Inspect projection transmission or sinograms, if available. Nearly blank detector regions behind dense material indicate photon starvation, where streaks and unstable values are expected.
  • Use supported filtration and beam-hardening correction. Filtration can remove low-energy photons before they are absorbed, but it also changes dose, spectrum, and contrast. Apply the scanner’s documented calibration and correction sequence.
  • Change geometry when possible. Reorienting a sample or removable implant can shorten the path through dense material. In clinical work, orientation and protocol changes require the responsible imaging professional.
  • Use metal-artifact reduction cautiously. Compare corrected and original slices near the target. Iterative or interpolation-based methods may reduce visible streaks while altering edges, contrast, or quantitative values. The MetAMMI good-practice guide cautions that artifact-suppression processing can change image data and interpretation.

Do not declare success because a volume looks smoother. For measurement, document the correction, compare a known reference, and verify that the feature’s dimensions or intensity remain stable.

Free tools Windows power users keep installed

One-click scans. No signup required.

Special offer. See more information about Outbyte and uninstall instructions. Please review EULA and Privacy policy.

How do I fix blur, doubled edges, or motion artifacts?

Motion during projection acquisition creates inconsistent views that reconstruction cannot reconcile perfectly. Stabilize the object or manage patient motion before increasing sharpness or deblurring.

  1. Review the scan log for pauses, table or stage movement, collisions, and exposure interruptions.
  2. For laboratory work, secure the sample against vibration and verify that the mount does not flex during rotation. Recheck centering and stage runout.
  3. For clinical CT or CBCT, follow the site’s motion-management and repeat-scan criteria; do not improvise patient instructions or exposure changes.
  4. Check geometric calibration after service, a collision, or a change in mechanical behavior. AAPM’s Task Group 238 report discusses calibration and image-quality issues for volumetric C-arms.
  5. Reconstruct with the same data after correcting only the geometry or motion parameter. If doubled edges remain, the acquisition may require repetition.

How do field of view, truncation, and cone-beam sampling cause missing anatomy?

A structure can be missing because the detector never covered it or because the acquisition trajectory did not sample it completely.

Also popular on Amazon
Sale
Anker USB C Hub, 7in1 Multi-Port USB Adapter, 4K@60Hz USBC to HDMI Splitter | 85W Max PD, 2 USB 3.0 & 1 USBC Data Ports, SD/TF Card Reader, for Laptops/Mac and Other Type C Devices (Charger Not Included)
  • Sleek 7-in-1 USB-C Hub: Features an HDMI port, two USB-A 3.0 ports, and a USB-C data port, each providing 5Gbps transfer speeds. It also includes a USB-C PD input port for charging up to 100W and dual SD and TF card slots, all in a compact design.
  • Flawless 4K@60Hz Video with HDMI: Delivers exceptional clarity and smoothness with its 4K@60Hz HDMI port, making it ideal for high-definition presentations and entertainment. (Note: Only the HDMI port supports video projection; the USB-C port is for data transfer only.)
  • Double Up on Efficiency: The two USB-A 3.0 ports and a USB-C port support a fast 5Gbps data rate, significantly boosting your transfer speeds and improving productivity.
  • Fast and Reliable 85W Charging: Offers high-capacity, speedy charging for laptops up to 85W, so you spend less time tethered to an outlet and more time being productive.
  • What You Get: Anker USB-C Hub (7-in-1), welcome guide, 18-month warranty, and our friendly customer service.

FOV and truncation: Confirm the complete object width at every projection angle. Offset or region-of-interest scans can be useful, but their correction is approximate; residual edge distortion and voxel-value errors are possible. Do not use truncated edge values for quantitative claims without validation.

Circular-orbit CBCT: A circular trajectory does not provide complete cone-beam data for every location in the volume. Structures far from the central plane can show streaking or loss of definition. Review orthogonal planes, identify the affected region, and interpret off-plane detail conservatively. Changing opacity cannot supply unsampled information.

Special offer. See more information about Outbyte and uninstall instructions. Please review EULA and Privacy policy.

The AAPM C-arm report provides device- and geometry-specific quality-control guidance. Dental CBCT users should also consult the AAPM Task Group 261 methodology for phantom-based artifact and image-quality checks.

Why is detail missing even though the voxel size is small?

Voxel size describes the grid, while spatial resolution describes the smallest detail the complete imaging chain can distinguish. A small voxel can oversample a blurred focal spot, detector, motion, or reconstruction kernel.

Check the system’s measured or specified resolution with a feature of known dimensions. The laboratory micro-CT guideline in GigaScience recommends using known features to assess scan quality and warns against treating voxel size as resolution. Consider magnification, focal-spot size, detector blur, projection count, exposure, and contrast together. More magnification may improve sampling but reduce FOV; higher exposure can reduce noise but may be limited by dose, heat, or sample damage.

Use a resolution target or phantom suited to the scanner and question. A phantom designed for dental CBCT may not answer a micro-CT pore-size question, and a high-contrast target does not establish low-contrast detectability.

Special offer. See more information about Outbyte and uninstall instructions. Please review EULA and Privacy policy.
Also popular on Amazon
Sale
BENFEI USB C Hub 5-in-1 with 4K HDMI(Certified), 100W Power Delivery, 3 USB-A, Silicone Cable, Aluminum Case Compatible with MacBook Pro/Air, iPad Pro, iMac, iPhone 15 Pro/Pro Max, XPS, Thinkpad
  • Portable and powerful USB-C HUB: BENFEI USB Type-C HUB, with super-soft and knot-free silicone woven design cable, meets most mobile office needs. Compact, lightweight, stylish, and powerful portable USB C Hub equipped with 1 x HDMI port, 1 x 100W charging, and 3 x USB ports. 18-month warranty, 24-hour response, to ensure you feel at ease when using our product.
  • Design centered on comfort and reliability: Thanks to BENFEI's end-to-end in-house cable production capability, in-house PCBA and assembly capability, using the industry's most advanced silicone woven design and process, 20cm cable in length, no knots, super-soft, the HUB is easy to use in all scenarios: laptop, tablet, stand etc. Super-soft, 25000+ life cycles, to meet your daily carrying and office needs.
  • 100W Charging: Support up to 90W USB C pass-through charging via Type-C port to keep your laptop powered. 10W is reserved for other interface operations. No data and video function on the Type-C port.
  • 4K HDMI Display: The HDMI port supports media display at resolutions up to 4K 30Hz, keeping every incredible moment detailed and ultra vivid. Please note that the C port of the Host device needs to support video output.
  • Transfer Files in Seconds: Transfer files and from your laptop at speeds up to 10 Gbps with USB A 3.2 port. Extra 2 USB A 2.0 ports are perfectly for your keyboards and mouse.

How should I compare two reconstructions or correction settings?

Use the same acquisition whenever possible and compare the target feature, not just overall appearance.

  1. Feature visibility: Is the target visible in original slices, and is its boundary consistent across planes?
  2. Artifact severity: Are rings, streaks, shading, or truncation reduced specifically near the target?
  3. Resolution and noise: Did an apparent improvement come from smoothing that erased fine structure?
  4. Segmentation stability: Do reasonable threshold changes produce the same object volume, thickness, or connectivity?
  5. Quantitative values: Compare intensities or dimensions with an appropriate reference, not with an arbitrary display level.
  6. Coverage: Was the entire target measured through the full angular range?

Save parameter files and label each volume with calibration, reconstruction algorithm, kernel, corrections, and segmentation version. A visually cleaner result is not automatically a more accurate result.

Independent reader supportYour contribution helps us test, update, and keep practical guides available for everyone.Support on Ko-Fi

When should I rescan?

Rescan only when the missing information is acquisition-limited and a new scan is justified by the application, safety requirements, and available protocol.

A new acquisition is the logical remedy when the target left the FOV, projections are incomplete, motion is severe, transmission is inadequate, or the true resolution is insufficient. It is not the first remedy when the feature is already clear in slices but hidden by segmentation or opacity. Before repeating a clinical scan, follow dose and scheduling policies; before repeating a laboratory scan, consider sample stability, radiation sensitivity, and whether a lower-risk geometry can answer the question.

Special offer. See more information about Outbyte and uninstall instructions. Please review EULA and Privacy policy.

Document why the first scan failed, what changed, and how the repeat will be verified. If no supported setting can provide complete coverage or adequate resolution, report the limitation instead of manufacturing certainty through aggressive processing.

What should a quality-control record contain?

A useful record lets another operator reproduce the diagnosis and detect drift.

Also popular on Amazon
𝟒𝐏𝐚𝐜𝐤 𝐔𝐩𝐠𝐫𝐚𝐝𝐞𝐝 USB to USB C Adapter,Type-C Female to A Male Charger Converter for iPhone 18 Charger,iWatch Ultra SE 9 10,iPhone 17 Pro Max 16 15 14,Samsung S25,AirPods,iPad,Car,Xbox
  • 【Read before You Buy】 Note: This adapter is USB 2.0 version and cannot transmit HDM, VGA, or other video signals. Nevertheless, they are fully capable of charging devices,duplicating files, and can be seamlessly integrated with USB-C earphones, wireless network adapters, and SD card adapters.
  • 【Easy to Use and Safe】Thanks to modern manufacturing techniques, we've made these adapters sufficiently compact so that they can remain inserted in your device without noticeable protrusion or inconvenience. This means you don't have to constantly plug and unplug them, reducing the likelihood of wear and misalignment, and making them more convenient to carry around.
  • 【Reliable Quality】Engineered for enhanced durability, durable aluminum alloy shell material,get excellent wear resistance and heat dissipation,the male USB C and female USB connectors & the male USB and female USB C connectors are designed to be plugged and unplugged up to 20000 times. Provides data transfer, device charging, memory space expansion, and additional computer peripherals.
  • 【Think more for you】Do you need to connect a USB-C-enabled device to an odd device that only has USB-A ports? Then these USB-A male to USB-C female adapters are made for you.Simply insert the adapter into the USB-A port on the device, and you can instantly connect your USB-C device to the device that originally didn't have the correct connection port.
  • 【Trusted xiwxi Quality and Service】As a responsible brand seller, you will receive xiwxi's 12-month Quality assurance and lifetime friendly customer service, you're not just buying a product,you're investing in peace of mind with all-round quality and exceptional customer service.
  • Scanner model, detector mode, software and reconstruction version
  • Object or patient setup, FOV, magnification, and orientation
  • Exposure, filtration, projection number, angular range, and transmission checks where available
  • Calibration date, phantom identity, and pass/fail observations
  • Original and corrected reconstruction parameters
  • Artifact description, affected planes, and screenshots or representative slices
  • Segmentation thresholds, smoothing, connectivity rules, opacity, and rendering mode
  • Whether quantitative values changed after correction

Use the scanner manufacturer’s checkup procedure and a phantom whose geometry and material match the intended quality-control question. Keep the baseline volume so future scans can be compared consistently.

Which troubleshooting mistakes should I avoid?

  • Changing the threshold first: It cannot recover measurements that were never acquired.
  • Equating voxel size with resolution: The focal spot, detector, geometry, noise, and reconstruction all contribute.
  • Applying a universal setting: Clinical CT, C-arm CBCT, dental CBCT, industrial CT, and micro-CT expose different controls and constraints.
  • Trusting one projection or one plane: Inspect the full angular set and orthogonal slices.
  • Overusing ring removal or metal reduction: Filters can erase real circular features or alter quantitative values.
  • Judging by a surface model alone: Always return to source slices.
  • Repeating a scan without documenting the failure: You may reproduce the same artifact while adding dose, time, or sample exposure.

What is the practical decision tree for a missing feature?

Use this short sequence at the workstation:

  1. Visible in projections? If no, check FOV, truncation, transmission, and acquisition completeness; a rescan may be required.
  2. Visible in slices? If no, check motion, calibration, penetration, noise, and true spatial resolution.
  3. Visible in slices but not 3D? Check segmentation, threshold, connectivity, opacity, clipping, and rendering mode.
  4. Present after correction? Compare with the original slices and a suitable QC reference to ensure the correction did not erase or distort it.
  5. Still ambiguous? Escalate with the raw data, logs, calibration status, and parameter files to the scanner manufacturer or qualified imaging physicist.

Frequently Asked Questions

Can changing the 3D threshold recover a structure that is outside the scan field?

No. Thresholding only classifies voxels that were reconstructed. If projections did not measure the structure because it left the field of view or the acquisition was incomplete, the missing information requires a supported acquisition change or a new scan.

Special offer. See more information about Outbyte and uninstall instructions. Please review EULA and Privacy policy.

Why do rings appear in one CT scan but not another?

Detector response can vary with calibration status, detector mode, temperature, exposure history, or hardware changes. Compare the affected scan with a phantom or another acquisition and follow the scanner’s calibration checkup procedure before applying ring-removal processing.

Is a smaller voxel size always better for seeing tiny features?

No. Resolution is limited by the focal spot, detector, geometry, motion, reconstruction, contrast, and noise as well as voxel sampling. A known-size resolution target provides a more meaningful check than the displayed voxel dimension alone.

How can I tell whether metal-artifact reduction damaged my measurements?

Reconstruct the same projections with and without the correction, then compare the target’s edges, intensity, dimensions, and segmentation stability. Use a suitable phantom or baseline when quantitative accuracy is required, and retain the uncorrected volume.

Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon at the time of purchase will apply. Prices as of November 22, 2026 5:05 pm GMT+0530.

Leave a Reply

Your email address will not be published. Required fields are marked *

Special offer. See more information about Outbyte and uninstall instructions. Please review EULA and Privacy policy.

Recommended PC Tool
Recommended PC Tool
Windows Errors? Fix Them Before They SpreadFree repair scan
Crashes, No Sound, or Screen Glitches?Free driver scan

Two free Windows tools

One Free Minute Could Fix That PC

Before you go - each of these free tools takes about a minute and tackles what quietly slows a Windows PC down.

Special offer. View Outbyte info, uninstall instructions, EULA, and Privacy Policy.