Recommended Free Tools
Some links on this page are affiliate links: if you buy through them we may earn a commission, at no extra cost to you.
Reducing AI inference memory usage means controlling three different demands: model weights, the key-value (KV) cache that grows with generated tokens, and temporary runtime allocations. Quantize weights when loading the model is the problem; limit context, concurrency, and batched tokens when the KV cache is the problem; and use lower-precision KV storage or CPU offloading only when your framework and hardware support them. The right settings depend on your model, GPU, backend, prompt lengths, and concurrency, so change one variable at a time and measure peak memory, output quality, throughput, time to first token (TTFT), and inter-token latency on a representative workload.
Why is my LLM running out of GPU memory?
An out-of-memory (OOM) error can occur at three distinct points, and each points to a different remedy:
As an Amazon Associate I earn from qualifying purchases.
What’s actually slowing this PC down?
Pick the symptom - the matching free tool is one click away.
- During model loading: the weights and framework overhead do not fit. Weight quantization, sharding, or additional GPU capacity addresses this case.
- During prefill: a long prompt creates large temporary activations and KV entries before the first token is returned. Reducing the maximum context or prefill token budget helps.
- After requests accumulate: concurrent sequences grow their KV caches while decoding. Lowering concurrency, limiting batched tokens, or compressing/offloading the KV cache helps.
Do not treat the advertised context window as a free allowance. A model may support a very long context in theory, but reserving capacity for that context and for several simultaneous requests can exceed a single GPU’s memory.
What uses memory during inference?
Model weights are the persistent parameters loaded into device memory. Lowering their precision reduces this fixed portion, but it does not remove the memory needed to run attention or serve multiple requests.
Popular on Amazon
- 【90 Degree Full Function USB C Adapter】Supports the latest USB4 standard for up to 40Gbps of bandwidth, 8K video support, and up to 240W Fast charging; Support USB PD 3.1 Extended Power Range (EPR) including 140W, 180W and 240W. Your productivity is easily doubled. *Warm Tip: For the best fit, please make sure the USB-C port is fully exposed; thick or bulky cases may affect compatibility.
- 【Reliable Quality】Made from high-quality, scratch-resistant aluminum alloy, delicate metal frame. get excellent wear resistance and heat dissipation. Non-Slip Design for easier insertion and removal.
- 【Small and portable】Ultra thin size, ultra compact design, a petite physique that matches the minimalist design of your modern laptops. Coming with a slim figure that won't block the port next to the one it's plugged into.
- 【Compatibility】Widely work with most usb c, thunderbolt 4/3 devices. Compatibilit for ROG Ally, Steam Deck, Switch, MacBook Pro, Quest 3 VR headset, Surface Book 2, iPhone 18/17/16/15, Samsung Galaxy S23/S22/S21, Note 20/10, Google Pixel, ChromeBook, etc.
- 【Excellence Customer Support】If you experience any issues or cable failure, simply reach out to our dedicated customer service team. We provide a prompt response within 18 hours, providing you with the necessary technical support to resolve any concerns.
The KV cache stores attention keys and values from prior tokens so the model does not recompute them on every decoding step. As the prompt and generated answer become longer, and as more sequences run at once, the cache grows. Hugging Face describes its purpose this way: “A kv-cache stores the past keys and values instead of recomputing them each time.” Read the full Transformers optimization guide for the implementation context.
There is also runtime overhead: temporary activations, CUDA workspaces, allocator fragmentation, and buffers used by parallelism. Consequently, the arithmetic size of the weights is only a starting point, not a safe GPU-memory budget.
| Symptom | Likely dominant demand | First change to try |
|---|---|---|
| OOM immediately while loading | Weights plus load-time buffers | Use a supported quantized checkpoint or quantization mode; otherwise shard across GPUs. |
| OOM on long prompts, before output | Prefill activations and KV allocation | Lower the application’s maximum context and prefill/batched-token budget. |
| OOM only with several users | KV cache for concurrent sequences | Lower maximum concurrent sequences and investigate KV-cache dtype or offload support. |
| Frequent KV-cache preemption | Cache capacity exhausted by scheduling | Reduce concurrency or batched tokens, or provide more memory/parallelism. |
How does weight quantization reduce memory?
Quantization stores model parameters in fewer bits than the original checkpoint. A lower-bit representation requires less storage, leaving more room for the KV cache and runtime buffers. The vLLM memory-conservation guide summarizes the trade-off: “Quantized models take less memory at the cost of lower precision.”
Use a checkpoint and quantization format that your serving framework, model architecture, and GPU actually support. Quantization is not a universal speedup: some kernels accelerate a particular format, while others add dequantization work or have limited hardware support. Quality changes also depend on the model, calibration data, task, and bit width; do not assume a fixed loss.
When should I quantize the weights?
Quantize first when the failure occurs before requests can be served or when the unquantized weights leave too little headroom for any useful cache. If the model already loads comfortably but fails only as context or concurrency rises, weight quantization may help, but cache and scheduler limits are usually the more direct controls.
Keep an unquantized or higher-precision reference for regression checks. Compare task-specific accuracy, refusal behavior, tool-call formatting, and numerical outputs—not only whether the process starts. A model that fits but produces unacceptable outputs is not a successful memory optimization.
Free tools Windows power users keep installed
One-click scans. No signup required.
As a scale reference, the Hugging Face Transformers 4.57.0 optimization guide states that a 70-billion-parameter Llama 2 model needs 256 GB for full-precision weights and 128 GB for half-precision weights. Those figures describe weights alone; a serving deployment also needs KV cache and runtime headroom.
Also popular on Amazon
- 5-in-1 Connectivity: Equipped with a 4K HDMI port, a 5 Gbps USB-C data port, two 5 Gbps USB-A ports, and a USB C 100W PD-IN port. Note: The USB C 100W PD-IN port supports only charging and does not support data transfer devices such as headphones or speakers.
- Powerful Pass-Through Charging: Supports up to 85W pass-through charging so you can power up your laptop while you use the hub. Note: Pass-through charging requires a charger (not included). Note: To achieve full power for iPad, we recommend using a 45W wall charger.
- Transfer Files in Seconds: Move files to and from your laptop at speeds of up to 5 Gbps via the USB-C and USB-A data ports. Note: The USB C 5Gbps Data port does not support video output.
- HD Display: Connect to the HDMI port to stream or mirror content to an external monitor in resolutions of up to 4K@30Hz. Note: The USB-C ports do not support video output.
- What You Get: Anker 332 USB-C Hub (5-in-1), welcome guide, our worry-free 18-month warranty, and friendly customer service.
How do I reduce KV-cache memory?
Reduce the amount of cache that can exist, store each cache entry more compactly, or move part of it off the GPU. Start with limits that match your real workload before adopting more complex mechanisms.
1. Set the maximum context to a real requirement
Configure max_model_len (or the equivalent in your server) to the longest prompt-plus-generation context your application genuinely needs. A lower limit caps per-sequence KV growth and makes capacity planning predictable. Reject or truncate requests that exceed the limit with an explicit user-facing policy rather than allowing an accidental allocation spike.
Do not set the value solely from the model card’s largest advertised context. If most requests are a few thousand tokens, reserving tens of thousands for every possible request wastes capacity that could serve other users.
2. Limit concurrent sequences
max_num_seqs controls how many sequences can be active in a batch. Lower it when memory pressure appears only under concurrent traffic or when logs show KV-cache preemption. This trades peak concurrency and aggregate throughput for a smaller, more predictable cache footprint.
Choose the limit from observed traffic, not a theoretical maximum. A queue with bounded concurrency can deliver a better service-level objective than allowing enough requests to trigger repeated preemption or OOM failures.
3. Tune the batched-token budget
max_num_batched_tokens limits the number of tokens processed in a scheduling step. A smaller budget can reduce the amount of work and cache pressure admitted at once; a larger budget can improve device utilization and TTFT when sufficient memory exists.
vLLM’s optimization guidance gives workload-dependent examples: values around 2,048 can improve inter-token latency by preventing too many prefills from delaying decoding, while values above 8,192 are suggested for optimal throughput in some cases, especially smaller models on large GPUs. These are vLLM guidelines, not universal constants. Test several values with the same prompt-length and concurrency distribution.
The Tool Desk
Outbyte Driver Updater FREEFix the driver behind crashes, sound loss and screen glitchesFind Drivers →Outbyte PC Repair FREEClear out junk files and repair common Windows errorsFree Scan →Also popular on Amazon
- Sleek 7-in-1 USB-C Hub: Features an HDMI port, two USB-A 3.0 ports, and a USB-C data port, each providing 5Gbps transfer speeds. It also includes a USB-C PD input port for charging up to 100W and dual SD and TF card slots, all in a compact design.
- Flawless 4K@60Hz Video with HDMI: Delivers exceptional clarity and smoothness with its 4K@60Hz HDMI port, making it ideal for high-definition presentations and entertainment. (Note: Only the HDMI port supports video projection; the USB-C port is for data transfer only.)
- Double Up on Efficiency: The two USB-A 3.0 ports and a USB-C port support a fast 5Gbps data rate, significantly boosting your transfer speeds and improving productivity.
- Fast and Reliable 85W Charging: Offers high-capacity, speedy charging for laptops up to 85W, so you spend less time tethered to an outlet and more time being productive.
- What You Get: Anker USB-C Hub (7-in-1), welcome guide, 18-month warranty, and our friendly customer service.
What batch size should I use for LLM inference?
Use the largest concurrency and token budget that meet your memory and latency objectives without preemption. There is no universally correct batch size: fewer simultaneous sequences or fewer batched tokens reduce memory pressure, while larger batches can improve throughput only when the GPU has enough headroom.
Measure at least four outcomes for each setting:
- Peak GPU memory: include loading, prefill, and steady-state decode.
- TTFT: how long a user waits for the first generated token.
- Inter-token latency: the spacing between generated tokens after decoding starts.
- Throughput and quality: tokens per second or requests per second, plus task-specific output checks.
Use a fixed workload matrix—for example, short and long prompts at low and peak expected concurrency—and change one setting per run. A batch that wins aggregate tokens per second may make interactive responses feel slow; a low-latency setting may leave throughput capacity unused.
Can KV-cache quantization save more memory?
Yes, when the serving stack supports a lower-precision KV-cache data type for your model and device. Unlike weight quantization, this targets the cache that grows with context and concurrency. It can therefore help a deployment that loads its weights successfully but runs out of memory as users or token counts increase.
Check the framework’s supported cache dtypes, attention implementation, GPU compute capability, and model-specific limitations before enabling it. Lower precision can affect output quality or numerical stability, and unsupported combinations may fail at startup or silently fall back to another path. The vLLM conserving-memory documentation lists cache data-type options and their support considerations.
Research results illustrate the possible—not guaranteed—scale of the benefit. The KIVI paper reports 2.6× lower peak memory including weights, up to a 4× larger batch size, and 2.35×–3.47× throughput in its evaluated models and workloads. Those numbers come from that paper’s setup and should not be presented as a promise for another quantizer, model, GPU, or serving framework. Read the KIVI paper for its exact methodology and scope.
When does CPU offloading make sense?
CPU offloading can extend effective capacity by moving some KV-cache data from GPU memory to system RAM. It is a fallback when the cache is the bottleneck and the framework provides a supported offload path. Transfers across the CPU–GPU boundary add latency and consume bandwidth, so offloading may reduce throughput or increase inter-token latency.
Verify available system RAM, NUMA placement, PCIe or interconnect bandwidth, and the framework’s compatibility with your attention backend. Keep enough GPU-resident cache for the latency-sensitive portion of the workload when the implementation allows that control. If offloading causes unacceptable stalls, lower concurrency or context instead of treating system RAM as equivalent to VRAM.
Also popular on Amazon
- Portable and powerful USB-C HUB: BENFEI USB Type-C HUB, with super-soft and knot-free silicone woven design cable, meets most mobile office needs. Compact, lightweight, stylish, and powerful portable USB C Hub equipped with 1 x HDMI port, 1 x 100W charging, and 3 x USB ports. 18-month warranty, 24-hour response, to ensure you feel at ease when using our product.
- Design centered on comfort and reliability: Thanks to BENFEI's end-to-end in-house cable production capability, in-house PCBA and assembly capability, using the industry's most advanced silicone woven design and process, 20cm cable in length, no knots, super-soft, the HUB is easy to use in all scenarios: laptop, tablet, stand etc. Super-soft, 25000+ life cycles, to meet your daily carrying and office needs.
- 100W Charging: Support up to 90W USB C pass-through charging via Type-C port to keep your laptop powered. 10W is reserved for other interface operations. No data and video function on the Type-C port.
- 4K HDMI Display: The HDMI port supports media display at resolutions up to 4K 30Hz, keeping every incredible moment detailed and ultra vivid. Please note that the C port of the Host device needs to support video output.
- Transfer Files in Seconds: Transfer files and from your laptop at speeds up to 10 Gbps with USB A 3.2 port. Extra 2 USB A 2.0 ports are perfectly for your keyboards and mouse.
Should I use a static KV cache?
A static KV cache is preallocated to a maximum size rather than grown dynamically. That predictable allocation can pair with torch.compile and improve execution speed for compatible models. It does not automatically minimize reserved memory: allocating for the maximum context and shape can reserve more memory than a dynamic cache when actual requests are small.
Hugging Face notes that static caching can be combined with compilation for “up to a 4x speed up,” while warning that the result varies by model size and hardware. Treat that figure as the guide’s reported upper-bound example, not an expected result. Static caches also impose shape and feature restrictions; confirm that your model, generation path, and compiler support them before switching.
How do I tune vLLM settings step by step?
- Record the baseline. Log model and quantization format, GPU model and memory, framework version, context limits, concurrency, peak memory, TTFT, inter-token latency, throughput, and representative output-quality checks.
- Classify the failure. Note whether OOM occurs during weight loading, long-prompt prefill, or concurrent decoding. Capture warnings about KV-cache preemption.
- Fix weight capacity first. If loading fails, select a supported quantized checkpoint or mode. Re-run the same workload and verify quality before changing scheduler limits.
- Set
max_model_len. Use the longest context the product actually promises. Repeat the long-prompt test and confirm that over-limit requests receive the intended error or truncation behavior. - Set
max_num_seqs. Start at expected peak concurrency, then lower it if cache pressure or preemption persists. Observe queueing and latency, not only memory. - Tune
max_num_batched_tokens. Try lower and higher budgets around your baseline. Lower values often protect decode latency; higher values can improve TTFT or throughput when memory permits. - Evaluate KV-cache precision. Enable only a documented, compatible dtype. Compare quality, memory, TTFT, inter-token latency, and throughput against the baseline.
- Consider CPU offload. Use it only if the GPU remains the limiting resource and transfer overhead is acceptable. Monitor host RAM and system-level latency.
- Try static caching and compilation last. Confirm shape support, account for maximum-size reservation, and keep a rollback configuration.
- Lock the configuration. Store the chosen limits with the model and framework version, and revalidate after upgrades or model changes.
Consult the current vLLM engine-argument reference for exact flag names, defaults, and version-specific behavior. Defaults can change, and an option available in one backend may not be available in another.
What should I do when vLLM reports KV-cache preemption?
Preemption means the scheduler cannot keep all active sequences’ cache blocks resident under the current limits. First reduce max_num_seqs or max_num_batched_tokens, then retest with the same traffic. If the application truly needs that concurrency, increase cache capacity through a suitable memory-allocation setting, supported quantization/offload, or additional GPUs.
Multi-GPU options have costs. Tensor parallelism can add synchronization overhead; pipeline parallelism can add latency and pipeline bubbles. Distributed serving is a capacity strategy, not a guarantee of better single-request latency. Use it when the workload and hardware justify the operational complexity.
How much GPU memory do I actually need?
Estimate three budgets separately: quantized or unquantized weights, worst-case KV cache at your chosen context and concurrency, and runtime headroom. Then validate the estimate with the exact model, backend, and request distribution. Leave margin for allocator behavior and bursts rather than targeting 100% utilization.
A larger-memory GPU is a capacity alternative when software controls cannot make the target workload fit. NVIDIA lists 32 GB of GDDR7 for the GeForce RTX 5090, while its Founders Edition specification lists 1,000 W required system power. Those are hardware specifications—not evidence that a particular model, quantization format, or workload will fit or perform well. Check the card variant, host power and cooling, framework support, and total cost before purchasing.
Also popular on Amazon
- 【Read before You Buy】 Note: This adapter is USB 2.0 version and cannot transmit HDM, VGA, or other video signals. Nevertheless, they are fully capable of charging devices,duplicating files, and can be seamlessly integrated with USB-C earphones, wireless network adapters, and SD card adapters.
- 【Easy to Use and Safe】Thanks to modern manufacturing techniques, we've made these adapters sufficiently compact so that they can remain inserted in your device without noticeable protrusion or inconvenience. This means you don't have to constantly plug and unplug them, reducing the likelihood of wear and misalignment, and making them more convenient to carry around.
- 【Reliable Quality】Engineered for enhanced durability, durable aluminum alloy shell material,get excellent wear resistance and heat dissipation,the male USB C and female USB connectors & the male USB and female USB C connectors are designed to be plugged and unplugged up to 20000 times. Provides data transfer, device charging, memory space expansion, and additional computer peripherals.
- 【Think more for you】Do you need to connect a USB-C-enabled device to an odd device that only has USB-A ports? Then these USB-A male to USB-C female adapters are made for you.Simply insert the adapter into the USB-A port on the device, and you can instantly connect your USB-C device to the device that originally didn't have the correct connection port.
- 【Trusted xiwxi Quality and Service】As a responsible brand seller, you will receive xiwxi's 12-month Quality assurance and lifetime friendly customer service, you're not just buying a product,you're investing in peace of mind with all-round quality and exceptional customer service.
What are the common mistakes?
- Confusing weights with total memory: a compressed checkpoint can still OOM from KV cache and runtime allocations.
- Setting the largest context by default: every extra possible token increases worst-case cache requirements.
- Calling batch size a single number: sequence count and batched-token count are different controls with different latency effects.
- Changing many flags at once: you lose the ability to attribute a memory or quality change to one intervention.
- Assuming quantization is lossless: validate the tasks that matter to your users.
- Ignoring preemption warnings: a server may appear healthy while repeatedly evicting and recomputing cache blocks.
- Copying settings across frameworks: flag names, defaults, kernels, and supported dtypes differ.
- Using vendor figures as guarantees: paper results, guide examples, and product specifications are conditional evidence, not promises for your deployment.
How should I choose a final configuration?
Choose the configuration that satisfies your product’s quality and latency targets at peak expected traffic, not the one with the smallest memory number in isolation. A practical decision order is:
- If weights do not load, quantize or distribute them.
- If long prompts fail, reduce the maximum context and prefill token budget.
- If concurrent traffic fails, reduce active sequences and tune batched tokens.
- If the cache remains the bottleneck, test supported KV-cache quantization, then CPU offloading.
- If speed is the priority and memory reservation is acceptable, evaluate static caching with compilation.
- If requirements still exceed one device, assess multi-GPU serving or a higher-memory system.
Keep a documented baseline and rerun it after model, GPU driver, CUDA, or serving-framework changes. Memory behavior is an interaction between all of those components and your actual prompt and concurrency distribution.
Quick wins for a faster PC:
Fix the driver behind crashes, sound loss and screen glitchesFind Drivers →Repair Windows errors before they cause bigger problemsFix Now →Sources and implementation references
- vLLM: Conserving memory
- vLLM: Engine arguments
- vLLM: Optimization and tuning
- Hugging Face Transformers 4.57.0: Optimizing inference
- KIVI: A Tuning-Free Asymmetric 2bit Quantization for KV Cache
- NVIDIA GeForce RTX 5090 specifications
Frequently Asked Questions
Does quantization reduce KV-cache memory too?
Weight quantization primarily shrinks the model parameters loaded at startup. KV-cache usage changes only if you separately enable a supported lower-precision cache format or another cache-compression method.
Can I increase context length after quantizing a model?
Sometimes, because the smaller weights leave more headroom, but the cache still grows with every token and active sequence. Increase the limit only after checking peak memory and latency at the longest real prompts.
Why does lowering batch size increase response time?
Fewer sequences can reduce GPU utilization and queue more requests, lowering aggregate throughput even while protecting memory. Interactive latency may improve or worsen depending on prefill contention and scheduler settings.
Is CPU offloading better than using a lower-bit KV cache?
Neither is universally better. A lower-bit cache avoids transfers but may change numerical behavior or lack backend support; offloading preserves the selected cache precision but can add transfer latency and host-memory pressure.
Do these 3 things before closing this tab:
1Fix the driver behind crashes, sound loss and screen glitches2Clear out junk files and repair common Windows errors3Scan for outdated or missing drivers - takes under a minuteWhen should I add another GPU instead of tuning settings?
Add capacity when the required model, context, and concurrency cannot meet quality or latency targets within one device after supported quantization and cache limits are applied. Account for synchronization, networking, power, and operational overhead before choosing multi-GPU serving.

