Thanksgiving DealsAmazon USThanksgiving week: Black Friday picks start earlyAmazon US: current deals, useful picks and tech finds.Check DealsClean PCRecommendedOne scan can reveal what keeps slowing WindowsLook for cleanup and repair opportunities.Run ScanThanksgiving DealsAmazon USDo not wait for the rush - compare today's dealsAmazon US: current deals, useful picks and tech finds.See Picks×
FREEDOM251

Freedom251 › Blog

ESP32 or Raspberry Pi 5 for iPhone Projects: Which Board Should You Choose?

By Freedom251 Team · · 13 min read

What’s actually slowing this PC down?

Pick the symptom - the matching free tool is one click away.

Special offer. See more information about Outbyte and uninstall instructions. Please review EULA and Privacy policy.

Some links on this page are affiliate links: if you buy through them we may earn a commission, at no extra cost to you.

ESP32 vs Raspberry Pi for Controlling an iPhone: Which Is Better? The answer depends on what “controlling” means. Neither board can generally tap buttons, navigate apps, or take over iOS. If your iPhone should operate a device you build, an ESP32 is usually the simpler choice for a focused Bluetooth Low Energy (BLE), Wi-Fi, or supported HomeKit accessory. Choose a Raspberry Pi 5 when the project also needs a full computer, broader software, network services, USB, and GPIO. This guide separates those two meanings, explains the supported connection paths, and gives a practical way to choose.

At a glance

Name Best for Key spec Platforms Checked
ESP32 A purpose-built accessory that an iPhone controls BLE and Wi-Fi; Espressif documents a HomeKit SDK for several ESP32 variants BLE app protocol, Wi-Fi service, or supported HomeKit accessory with iPhone November 2026
Raspberry Pi 5 A project that needs a general-purpose computer as well as wireless connectivity Wi-Fi, Bluetooth 5.0/BLE, USB, GPIO, multicore Arm processor, and multiple memory options Network service or app-specific BLE project with iPhone November 2026

The table compares documented capabilities, not measured speed, range, battery life, or latency. No current price is established for either category, so no price is shown.

As an Amazon Associate I earn from qualifying purchases.

Special offer. See more information about Outbyte and uninstall instructions. Please review EULA and Privacy policy.

Can an ESP32 or Raspberry Pi control an iPhone?

Not in the unrestricted sense. An ESP32 or Raspberry Pi cannot receive a general-purpose command such as “open this app,” “tap that control,” or “read everything on the screen.” iOS exposes specific accessory and app interfaces instead of granting a connected board control of the operating system. Apple’s External Accessory documentation describes communication with supported accessories, while its Bluetooth documentation describes app-to-BLE-device interaction.

There are two very different projects hidden inside the phrase “controlling an iPhone”:

Popular on Amazon
Yojaro 4Pack Silicone Suction Phone Case Mount, Silicon Adhesive Smartphones Stand Sticky, Hands-Free Phone Accessories Holder for Selfies and Videos (Black & White & Translucent & Light Pink)
  • 【Strong Adsorption】The inspiration of the silicone phone suction case comes from the adhesive force of the octopus. Each suction cup phone mount is 3.15 inches long and 2.17 inches wide, with 24 independent suction cups providing a stronger and more stable suction force, so you don't have to worry about your phone falling during use.
  • 【Back of Phone Suction Grip】Remove the adhesive film on the phone suction cup and stick it on the phone case. You can then fix the phone on any smooth surface, which is very convenient. (The phone suction cup cannot be removed and reused after being attached to the phone case. It is recommended to attach it to a regular phone case, not a valuable one.)
  • 【Widely Used】Our non-slip silicone phone sticky grip mount attaches to almost any flat phone case and make it compatible with common mobile phones such as iPhone and Android.You can shoot, watch videos or video calls in the kitchen, gym, dance studio, bathroom and other places.
  • 【Capture the Wonderful Picture】Whether you are a TikTok creator or just like to share videos and photos, this phone suction cup can help you hands-free capture wonderful videos and photos for sharing with friends.
  • 【Note】You can fix the phone suction cup on a smooth surface such as a mirror or glass. If necessary, wipe the suction cup with a damp cloth to obtain stronger suction. Before releasing your hand, make sure the phone is firmly fixed. (Not applicable to rough walls, wooden surfaces, and other uneven surfaces)
  • Controlling the phone itself: You want the board to operate iOS, automate arbitrary apps, mirror the display, or issue system-level commands. Neither board provides a general, supported route for that.
  • Using the iPhone to control your hardware: You want buttons in an iPhone app, the Home app, or a local interface to operate LEDs, relays, sensors, motors, or another device. Both boards can participate, but the board must implement a defined protocol and the iPhone must use the matching app or framework.

That distinction should decide the purchase before processor specifications do. If the first description is your requirement, changing from ESP32 to Raspberry Pi will not solve the iOS access limitation. If the second describes your project, continue with the board comparison.

Which board is better when an iPhone is the remote control?

For a focused accessory, the ESP32 is usually the better fit. It is designed to run embedded firmware that exposes a defined BLE or Wi-Fi service, and Espressif provides an open-source ESP HomeKit SDK for supported ESP32 variants. A small accessory normally needs a radio, a microcontroller, its device peripherals, and a protocol—not a complete desktop-like computer.

Special offer. See more information about Outbyte and uninstall instructions. Please review EULA and Privacy policy.

With BLE, an iOS app uses Apple’s Core Bluetooth framework to discover and communicate with a peripheral that implements the service your firmware defines. The app supplies the user interface; the ESP32 supplies the device behavior. This arrangement is appropriate for a controller with a few commands, sensor readings, or state changes.

With Wi-Fi, the ESP32 can expose a project-specific service on the local network. An iPhone app then sends requests over that service, subject to iOS permissions and normal network setup. The board still does not gain authority over unrelated iPhone functions.

HomeKit is another route for a compatible accessory. Espressif’s SDK documentation describes provisioning Wi-Fi before the Home app pairing flow for the relevant SDK path. Once paired, the accessory can be represented through Apple’s Home framework rather than requiring you to design every control screen yourself. Check the SDK’s supported ESP32 variants and its distinction between the open-source path and the MFi-oriented path before choosing a chip or planning a commercial product.

When is a Raspberry Pi 5 the better choice?

Choose a Raspberry Pi 5 when the accessory is also a software host. The official Raspberry Pi 5 product brief lists Wi-Fi, Bluetooth 5.0 with BLE, USB, GPIO, a multicore Arm processor, and memory options. Those capabilities let one board run a broader software stack, coordinate network services, store data, and connect to external hardware.

Special offer. See more information about Outbyte and uninstall instructions. Please review EULA and Privacy policy.
Also popular on Amazon
Apple EarPods Headphones with USB-C Plug, Wired Ear Buds with Built-in Remote to Control Music, Phone Calls, and Volume
  • SUPERIOR COMFORT — Unlike traditional circular ear buds, the design of EarPods is defined by the geometry of the ear. Which makes them more comfortable for more people than any other ear bud–style headphones.
  • HIGH-QUALITY AUDIO — The speakers inside EarPods have been engineered to maximize sound output and minimize sound loss, which means you get high-quality audio.
  • BUILT-IN REMOTE — EarPods with USB-C plug also include a built-in remote that lets you adjust the volume, control the playback of music and video, and answer or end calls with a pinch of the cord.
  • COMPATIBILITY — Works with all devices that have a USB-C port.
  • INTEGRATED MICROPHONE — A built-in microphone precisely captures your voice while you’re on the phone, taking a FaceTime call, or summoning Siri — so you’re always heard loud and clear.

That flexibility is useful for a gateway, dashboard server, camera or media project, protocol bridge, automation host, or an installation that needs several libraries and services at once. An iPhone can communicate with a service you design on the Pi, or with a BLE peripheral implemented by the Pi’s software.

The extra computer capability is not automatically an advantage. It adds an operating-system and software-maintenance responsibility that a simple embedded accessory may not need. If all you need is a few BLE commands, a Wi-Fi endpoint, or a narrowly defined HomeKit device, the Pi’s broader feature set can be unnecessary complexity.

What are the supported ways for an iPhone to communicate with either board?

The connection method determines what you build on the board and what the iPhone is allowed to do. Four paths are especially relevant.

BLE with a project-specific iPhone app

In a BLE design, the board acts as a peripheral and advertises a service with characteristics for the commands and data your project needs. The iPhone app uses Core Bluetooth to scan, connect, read, write, and subscribe to notifications. Apple describes Core Bluetooth as a way for apps to interact with BLE devices, but the app and firmware still need an agreed data format.

Special offer. See more information about Outbyte and uninstall instructions. Please review EULA and Privacy policy.

This is a strong ESP32 pattern for short commands, sensor telemetry, and nearby control. A Raspberry Pi 5 can also implement BLE behavior, but you will generally spend more effort maintaining the host software and its service lifecycle.

Wi-Fi and a local service

A board can provide a project-specific service over Wi-Fi, such as an API or another protocol selected for your application. The iPhone app connects to that service on the same network or through a network arrangement you explicitly configure. Apple’s accessory guidance covers supported setup and communication pathways; it does not turn a Wi-Fi-connected board into a universal iOS remote.

Also popular on Amazon
PopSockets Adhesive Phone Grip, Holder- Black | Anti-Drop, Kickstand, Secure Comfortable Hold, Black, Create a Mobile Phone Outfit
  • Secure Hold: Our PopSockets adhesive phone grip gives your cell phone a secure, comfortable hold in hand to help prevent drops while texting, taking photos, or scrolling on the go. Designed to stick firmly to most phone cases and devices.
  • Hands-Free Made Easy: Easily turn your PopSocket into a phone stand to prop up your phone anywhere, perfect for watching videos, video calls, or following recipes. A must-have phone holder that keeps your device secure and ready for anything.
  • Compatibility: Works with all phones, tablets, and Kindles. Sticks best to smooth, hard plastic cases and may not adhere to silicone or textured cases. Easily swap your PopTop to change up your style.
  • Black PopSockets: Simple, refined, and endlessly versatile. A timeless essential for any phone.
  • Travel Must-Have for People On the Go: A must-have travel accessory for flights, flying, airports, air travel, airplanes, planes, international trips, cruises, and long travel days. Key gadget for your airport haul, travel accessories and must-haves.

Wi-Fi is attractive when the device needs more range than a nearby BLE link, multiple clients, richer data, or integration with other network services. Plan for discovery, authentication, reconnect behavior, and what happens when the phone changes networks.

HomeKit and the Home app

A HomeKit-compatible accessory follows Apple’s pairing, identity, and accessory model. Espressif documents an ESP32 HomeKit SDK and an iPhone Home app setup sequence that includes Wi-Fi provisioning before pairing for that SDK path. This can reduce the amount of custom iPhone UI you must write, but it also imposes framework, accessory-type, and program-specific constraints.

Special offer. See more information about Outbyte and uninstall instructions. Please review EULA and Privacy policy.

Do not assume that any ESP32 firmware becomes HomeKit-compatible merely because the chip has Wi-Fi or BLE. Confirm the SDK’s supported variants, build path, and licensing or program implications for your intended distribution.

External Accessory and MFi connections

Apple’s External Accessory framework is for supported MFi accessories using approved physical or Bluetooth connections. The accessory manufacturer determines which third-party apps may communicate with it. This is a controlled accessory channel, not a generic method for arbitrary Bluetooth hardware to operate iOS.

The MFi Program FAQs explain that accessories using only BLE or standard Bluetooth profiles supported by iOS generally do not need MFi membership, while BLE HomeKit accessories are a documented exception. Individuals making accessories for personal use do not need to join MFi. Commercial requirements depend on the technology and product route, so verify them before shipping.

ESP32 vs Raspberry Pi 5: what changes in the implementation?

Decision axis ESP32 Raspberry Pi 5
Primary role Embedded controller inside the accessory General-purpose computer that can also provide wireless and GPIO functions
iPhone link BLE app protocol, Wi-Fi service, or supported HomeKit accessory App-specific BLE implementation or a network service designed for the project
Development emphasis Firmware, power behavior, board peripherals, and accessory protocol Operating-system and application stack, service management, networking, and attached hardware
Best reason to choose it The physical device itself is the project The project needs a computer, storage or software services in addition to hardware control
Main caveat SDK variant, supported chip, provisioning, and commercial/MFi implications require checking More software capability can mean more setup and maintenance than a simple accessory needs

These are project-fit recommendations inferred from the documented capabilities. They are not comparative hands-on results or performance benchmarks.

Special offer. See more information about Outbyte and uninstall instructions. Please review EULA and Privacy policy.
Also popular on Amazon
Sale
360° Rotating Stainless Steel Phone Tether Tab (Silvery 3-Pack) - Universal for iPhone & Other Phones (Fits Wristbands/Necklaces/Crossbody Straps)
  • [360 ° Flexible Rotation Design] Comes with a rotatable lanyard ring that supports 360 ° free rotation, effectively solving the problem of twisted and tangled lanyards
  • [Wide compatibility] The ultra-thin 0.02-inch design does not block the charging port at all, and both wired and wireless charging can be used directly without removing the pad. Compatible with most smartphones such as iPhone, compatible with various wristbands, lanyards, crossbody straps, and keychains
  • [Durable and Portable Material] Premium rust-resistant stainless steel material with good flexibility, which not only avoids scratching the phone case, but also has excellent anti rust and anti fading performance
  • [Multi scenario Practical] Paired with a lanyard or wristband, hands-free use can be achieved. The phone is within reach and not easily dropped, ideal for daily commuting and outdoor activities. Suitable for full coverage phone cases, does not support half coverage phone cases
  • [Quality Service] If you find any damage or other issues with the product upon receipt, please contact us immediately. We will handle it quickly

How do I choose between ESP32 and Raspberry Pi for my project?

Start with the job the board must perform, then select the smallest platform that satisfies it.

  1. Write the control boundary. If the requirement says “operate iOS,” “tap any app,” or “control the screen,” stop: neither board supplies a supported general-purpose route. Rewrite the requirement as a supported accessory or app interaction.
  2. List the device functions. Count sensors, outputs, motor or relay drivers, storage, user-interface needs, and network services. A small list of deterministic functions points toward ESP32; a requirement for several independent services points toward Pi 5.
  3. Select the transport. Use BLE for a nearby app-to-device link, Wi-Fi for a local network service or richer traffic, and HomeKit when the accessory model and SDK path fit your product. Transport choice can matter more than processor choice.
  4. Decide where the user interface lives. A custom iPhone app requires you to define the BLE or network protocol and its screens. HomeKit moves much of the control surface into Apple’s Home framework but brings its own accessory and pairing rules.
  5. Check deployment conditions. Battery-powered, always-on, sealed, or space-constrained devices usually favor an embedded design. A project that needs a local server, data processing, or several USB and network connections may justify the Pi.
  6. Check distribution requirements. Personal projects have different MFi considerations from commercial products. Confirm the technology-specific rules before committing to a HomeKit or External Accessory path.

How would an ESP32 accessory connect to an iPhone?

A practical ESP32 build begins with the protocol and accessory definition, not with an assumption that the board can control iOS.

  1. Define the commands and state. Specify every control the iPhone may send and every value the accessory may report. Keep the protocol explicit: command names, data types, units, error responses, and reconnect behavior.
  2. Choose BLE, Wi-Fi, or HomeKit. For a custom BLE app, design a service and characteristics that match the commands. For Wi-Fi, define the local service and how the app discovers and authenticates it. For HomeKit, verify that your ESP32 variant and accessory type are supported by Espressif’s SDK.
  3. Implement the firmware. Add the radio service, device drivers, state handling, and safe defaults. A lost phone connection should leave outputs in a deliberate state rather than whatever value happened to be last received.
  4. Build the iPhone side. A custom app uses Core Bluetooth for BLE or the networking APIs appropriate to your local service. It should request only the permissions it needs, display connection state, and handle a board that is powered off or out of range.
  5. Provision and pair. For the documented Espressif HomeKit flow, Wi-Fi provisioning occurs before the Home app pairing step. Follow the SDK’s current setup instructions for the selected variant instead of mixing instructions from a different HomeKit path.
  6. Secure the link. Authenticate commands where the protocol requires it, protect commissioning data, and avoid treating an untrusted local network as automatically safe. Apple’s platform security documentation describes pairing and encrypted sessions for HomeKit over IP and BLE.

This approach keeps the iPhone in the role of an authorized client and the ESP32 in the role of an accessory. It does not provide arbitrary access to other iPhone apps or system controls.

How would a Raspberry Pi 5 fit into an iPhone-controlled system?

A Pi 5 is most useful when it hosts software in addition to talking to hardware. Treat it as a computer with radios and GPIO, not as a special iOS-control device.

Special offer. See more information about Outbyte and uninstall instructions. Please review EULA and Privacy policy.
  1. Choose the service boundary. Decide whether the iPhone will call a network service, communicate through a custom BLE implementation, or control another device that the Pi coordinates. Keep the interface specific to your project.
  2. Set up the software environment. Install the supported operating system and the application components your service needs. Separate the device-control process from optional dashboards, databases, or integrations so a failure in one component does not leave hardware in an unsafe state.
  3. Implement authentication and state. Require an authorized client, validate command values, and record the current device state. Provide a clear response when the service is unavailable or a GPIO operation cannot be completed.
  4. Connect peripherals. Use the Pi 5’s listed USB and GPIO capabilities for attached hardware, while observing the electrical requirements of each peripheral. The product brief establishes the interfaces; the attached device still determines voltage, current, and driver requirements.
  5. Build the iPhone client or interface. The app should discover the service in the intended network environment, handle changing addresses or networks, and show whether a command was accepted. A network connection is not the same as permission to control iOS.
  6. Maintain the host. Plan for software updates, service restarts, logs, storage, and recovery after power loss. These tasks are part of choosing a general-purpose computer and are often unnecessary on a tightly scoped microcontroller accessory.
Independent reader supportYour contribution helps us test, update, and keep practical guides available for everyone.Support on Ko-Fi

Does HomeKit or MFi change the choice?

It can change the implementation and compliance work, but it does not make either board a universal iPhone controller. HomeKit is an accessory framework with pairing, identity, and supported accessory behavior. MFi is a technology- and product-path issue rather than a blanket requirement for every board that communicates with an iPhone.

For a personal BLE-only accessory using standard iOS-supported profiles, Apple’s MFi FAQ generally places the project outside MFi membership. BLE HomeKit accessories are a stated exception, and commercial products need a technology-specific review. If you intend to sell a HomeKit accessory, examine the current program and SDK path before finalizing hardware or marketing claims.

Also popular on Amazon
Anteel Double Sided - 2 Pack Silicone Suction Phone Case Mount,2.55"x3.94" | Hands-Free Non Slip Phone Grip, More Suction Cups, Stronger Suction Power, Selfies and Videos, Light Pink&White
  • 【PKYAA Double Sided Silicone Suction Phone Case Mount】PKYAA With Double Sided 40 Strong and Reliable individual suction cups, PKYAA provides a thicken and upgraded universal silicon suction mount for your phone.
  • 【Friendly to Content Creators】If you are a content creator or an online influencer, you can create videos anywhere with this suction mount completely hands free with this silicone cell phone mount for cases.
  • 【HANDS-FREE & Adhere to Mirrors】This Double Sided silicone suction phone case mount allows you to stick your phone to the mirror easily. No longer holding your phone in one hand to watch video tutorials while making up.
  • 【Strong Grip on the Smooth Surface】You can easily hang your phone anywhere with a smooth surface. All you do is you clean off your phone and smooth surface. It is STURDY and it not only sticks to mirrors, it also sticks to windows, it sticks to refrigerators, tiles and other clean, flat surfaces.
  • 【Press Down Firmly Every 30 Minutes】Use your palm or fingers to press the phone down firmly and check it's secure before letting go. Apply even pressure for a few seconds to allow the suction cup to adhere properly. To maintain the grip and prevent accidental falls, it's a good practice to periodically reapply pressure to the suction cup.

How are pairing and security handled?

HomeKit is not an unauthenticated broadcast-control channel. Apple’s Apple Platform Security guide describes authentication and encrypted communication for HomeKit accessories over IP and BLE. Your design still needs sensible authorization, safe command validation, and recovery behavior.

For a custom BLE or Wi-Fi protocol, you must define those protections yourself. Use least-privilege commands, reject malformed values, protect commissioning secrets, and decide what the hardware does when the trusted phone disappears. A board that is reachable on a local network should not be treated as trustworthy solely because it is inside the same home or office.

Special offer. See more information about Outbyte and uninstall instructions. Please review EULA and Privacy policy.

What commonly goes wrong?

  • Expecting screen automation: A board connection does not grant taps, app launching, or system-level control. Replace that requirement with an app-to-accessory protocol or a supported Apple framework.
  • Choosing the Pi for the wrong reason: The presence of an iPhone does not require a full computer. Select Pi 5 for its software-hosting and interface needs, not simply because it has Wi-Fi and Bluetooth.
  • Assuming every ESP32 supports the same HomeKit path: The Espressif SDK documents supported variants and setup details. Confirm the exact chip and SDK route before designing the enclosure or buying boards in quantity.
  • Confusing BLE with HomeKit: A custom BLE service and a BLE HomeKit accessory have different software, pairing, and program implications. Decide which model your iPhone experience requires.
  • Ignoring network changes: A Wi-Fi service may work on the commissioning network and fail when the iPhone joins another one. Document discovery, provisioning, and recovery for the actual deployment.
  • Leaving outputs undefined after disconnects: A relay, motor, heater, or lock should have an explicit fail-safe state. Reconnect logic should not blindly replay stale commands.
  • Treating specifications as performance results: The Pi 5 feature list documents interfaces and processor characteristics, not a guaranteed latency or range for your particular accessory. Validate those requirements in the final design.

Which board should you buy for common project types?

Project requirement Recommended starting point Reason
A few phone buttons control LEDs, sensors, or a small actuator nearby ESP32 BLE or a small Wi-Fi service can provide the link without a full computer.
An Apple Home app accessory using an ESP32-supported SDK path ESP32 Espressif documents a HomeKit SDK and an iPhone provisioning and pairing flow.
A local gateway that coordinates several services and peripherals Raspberry Pi 5 Its computer, networking, USB, GPIO, and BLE capabilities support a broader host role.
A requirement to tap arbitrary iPhone controls or automate unrelated apps Neither Neither board receives unrestricted iOS control through the documented accessory interfaces.
A commercial HomeKit product Either, only after program review Hardware capability is not enough; SDK variant, pairing path, and MFi implications must be verified.

Selection criteria

The recommendations use the documented distinction between an embedded accessory and a general-purpose computer. Selection criteria were: whether the project needs BLE, Wi-Fi, or supported HomeKit; whether it needs a full software host, USB, or GPIO; how much firmware versus operating-system maintenance is appropriate; and whether Apple’s accessory, pairing, or MFi rules apply. The recommendations do not include a comparative hardware test, latency measurement, battery test, or price survey.

Bottom line: ESP32 for the accessory, Raspberry Pi 5 for the computer

Use an ESP32 when your iPhone should control a focused device through BLE, Wi-Fi, or a supported HomeKit implementation. Use a Raspberry Pi 5 when that device also needs a general-purpose computer, broader software, network services, USB, or GPIO. If your actual goal is unrestricted control of the iPhone’s interface, choose neither: Apple’s documented accessory paths do not provide that capability.

Frequently Asked Questions

Do I need MFi membership for a personal ESP32 BLE project?

Apple’s MFi FAQ says individuals creating accessories for personal use do not need to join MFi. BLE-only accessories using standard iOS-supported profiles generally do not require membership either, but BLE HomeKit accessories are an exception. Commercial products need a technology-specific review.

Can I use a Raspberry Pi Pico for this comparison?

The Raspberry Pi 5 discussed here is a general-purpose computer; Raspberry Pi Pico is a separate microcontroller family. Its capabilities and software model should be evaluated independently rather than assumed to match the Pi 5.

Special offer. See more information about Outbyte and uninstall instructions. Please review EULA and Privacy policy.

Does an iPhone need internet access to control a local board?

Not necessarily. A BLE link is local, and a Wi-Fi design can use a project-specific service on the local network. Internet access may become relevant if your own design adds cloud services, remote access, or account-based features.

Which board is more suitable for a battery-powered accessory?

The available data does not provide comparable power figures, so it cannot establish a winner. An embedded ESP32 design is generally the more natural starting point when the device must be small and battery-operated, while a Pi 5 should be selected only after its power and host-software needs are justified.

Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon at the time of purchase will apply. Prices as of November 22, 2026 6:40 am GMT+0530.

Leave a Reply

Your email address will not be published. Required fields are marked *

Free tools Windows power users keep installed

One-click scans. No signup required.

Special offer. See more information about Outbyte and uninstall instructions. Please review EULA and Privacy policy.

Recommended PC Tool
Recommended PC Tool
PC Slower Than It Used to Be?Free scan - under a minute
Outdated Drivers Are Slowing You DownFree scan - exact matches

Two free Windows tools

One Free Minute Could Fix That PC

Before you go - each of these free tools takes about a minute and tackles what quietly slows a Windows PC down.

Special offer. View Outbyte info, uninstall instructions, EULA, and Privacy Policy.