Do these 3 things before closing this tab:
1Scan for outdated or missing drivers - takes under a minute2Clear out junk files and repair common Windows errors3Fix the driver behind crashes, sound loss and screen glitchesSome links on this page are affiliate links: if you buy through them we may earn a commission, at no extra cost to you.
DisplayPort and HDMI can both drive a 320Hz monitor, but neither is universally faster. The correct choice depends on the monitor’s exact input-mode table, the resolution and color mode you want, and the graphics card output. Dell’s Alienware AW2525HM reaches 1920 × 1080 at 320Hz through DisplayPort 1.4 but is limited to 255Hz over HDMI, while MSI’s MAG 274QPF X32 is specified for 2560 × 1440 at 320Hz on both DisplayPort 1.4a and HDMI 2.1. Check the model’s table before buying a cable; a port label or “high-bandwidth” cable cannot add a mode that the monitor or GPU does not support.
For HDMI configurations that require up to 48Gbps, use a certified Ultra High Speed HDMI Cable. For DisplayPort, follow the monitor and GPU makers’ recommendation; DP40 and DP80 ratings describe cable capabilities, not a blanket requirement for every 320Hz display.
As an Amazon Associate I earn from qualifying purchases.
What’s actually slowing this PC down?
Pick the symptom - the matching free tool is one click away.
At a glance
| Name | Best for | Key spec | Checked |
|---|---|---|---|
| Dell Alienware AW2525HM | Full HD users who need the monitor’s maximum 320Hz | 1920 × 1080 at 320Hz on DP 1.4; HDMI up to 255Hz | November 2026 |
| MSI MAG 274QPF X32 | QHD 320Hz from either supported input | 2560 × 1440 at 320Hz on DP 1.4a and HDMI 2.1 | November 2026 |
| Philips QHD 320Hz monitor | QHD gaming with RGB/4:4:4 and a listed 10-bit option | 2560 × 1440 at 320Hz; HDMI 2.1 FRL up to 48Gbps or DP 1.4 with DSC | November 2026 |
| Philips dual-mode 4K/FHD model | Users switching between UHD and very high-refresh Full HD | UHD 160Hz and FHD 320Hz over HDMI 2.1 and DP 1.4 | November 2026 |
The table shows why a generic “DisplayPort is better” or “HDMI 2.1 is better” verdict is unreliable. Each row is a manufacturer-specified mode, not an independent performance test.
Which is better for a 320Hz monitor: DisplayPort or HDMI?
Use the input that the monitor specifies for your target mode. DisplayPort is the winner when the monitor reserves 320Hz for DP, as Dell does on the AW2525HM. HDMI is equally suitable when the manufacturer lists 320Hz on HDMI 2.1, as MSI does on the MAG 274QPF X32. If both inputs list the same resolution, refresh rate, color depth and feature set, choose based on the GPU connector and the cable you already have.
Popular on Amazon
- 【90 Degree Full Function USB C Adapter】Supports the latest USB4 standard for up to 40Gbps of bandwidth, 8K video support, and up to 240W Fast charging; Support USB PD 3.1 Extended Power Range (EPR) including 140W, 180W and 240W. Your productivity is easily doubled. *Warm Tip: For the best fit, please make sure the USB-C port is fully exposed; thick or bulky cases may affect compatibility.
- 【Reliable Quality】Made from high-quality, scratch-resistant aluminum alloy, delicate metal frame. get excellent wear resistance and heat dissipation. Non-Slip Design for easier insertion and removal.
- 【Small and portable】Ultra thin size, ultra compact design, a petite physique that matches the minimalist design of your modern laptops. Coming with a slim figure that won't block the port next to the one it's plugged into.
- 【Compatibility】Widely work with most usb c, thunderbolt 4/3 devices. Compatibilit for ROG Ally, Steam Deck, Switch, MacBook Pro, Quest 3 VR headset, Surface Book 2, iPhone 18/17/16/15, Samsung Galaxy S23/S22/S21, Note 20/10, Google Pixel, ChromeBook, etc.
- 【Excellence Customer Support】If you experience any issues or cable failure, simply reach out to our dedicated customer service team. We provide a prompt response within 18 hours, providing you with the necessary technical support to resolve any concerns.
Port generation alone does not settle the question. A monitor can expose different limits on two ports that carry similar-sounding specifications. Conversely, a newer interface does not automatically mean that a display needs the newest cable rating: VESA notes that not every display requires the highest link-rate bandwidth to reach its maximum resolution and refresh rate.
What does “320Hz” mean at different resolutions?
Refresh rate is only one part of the signal. A 320Hz mode at 1920 × 1080 sends substantially less image data than 320Hz at 2560 × 1440, and both can change again when you select 8-bit or 10-bit color, RGB/4:4:4, HDR or variable refresh rate. Always compare the complete mode, not the number “320Hz” in isolation.
The Dell example is Full HD: its 320Hz mode is 1920 × 1080 through DisplayPort 1.4. The MSI example is more demanding QHD: 2560 × 1440 at 320Hz is listed on both DP 1.4a and HDMI 2.1. Philips’ QHD input table goes further by listing RGB/4:4:4 at 320Hz in 8-bit and a qualified 10-bit mode. Those are different requirements even though every mode is labelled 320Hz.
When HDR, VRR or 10-bit output matters, look for those combinations in the same table. A port may support 320Hz in one color mode but offer a lower maximum, a different bit depth or a compression requirement in another.
What do the manufacturer specifications say?
| Monitor and source | Input | Resolution and refresh | Color or link condition |
|---|---|---|---|
| Dell Alienware AW2525HM specifications | DisplayPort 1.4 | 1920 × 1080 at 320Hz | Use DP for the stated maximum; Dell lists HDMI up to 255Hz |
| MSI MAG 274QPF X32 specifications | DisplayPort 1.4a | 2560 × 1440 at 320Hz | Manufacturer lists the mode on DP 1.4a |
| MSI MAG 274QPF X32 specifications | HDMI 2.1 | 2560 × 1440 at 320Hz | Manufacturer also lists the mode on HDMI 2.1 |
| Philips QHD 320Hz manual | HDMI 2.1 | 2560 × 1440 at 320Hz | RGB/4:4:4; HDMI 2.1 FRL up to 48Gbps is required by the manual for the graphics-card connection |
| Philips QHD 320Hz manual | DisplayPort 1.4 | 2560 × 1440 at 320Hz | RGB/4:4:4; the manual specifies DP 1.4 with DSC and lists 8-bit plus a qualified 10-bit mode |
| Philips dual-mode manual | HDMI 2.1 or DisplayPort 1.4 | UHD 160Hz or FHD 320Hz | Changing resolution changes the maximum refresh mode |
These examples are deliberately different. They demonstrate that the monitor maker’s input table resolves the first decision, while the source device manual resolves whether your graphics card can actually deliver that signal.
Also popular on Amazon
- 5-in-1 Connectivity: Equipped with a 4K HDMI port, a 5 Gbps USB-C data port, two 5 Gbps USB-A ports, and a USB C 100W PD-IN port. Note: The USB C 100W PD-IN port supports only charging and does not support data transfer devices such as headphones or speakers.
- Powerful Pass-Through Charging: Supports up to 85W pass-through charging so you can power up your laptop while you use the hub. Note: Pass-through charging requires a charger (not included). Note: To achieve full power for iPad, we recommend using a 45W wall charger.
- Transfer Files in Seconds: Move files to and from your laptop at speeds of up to 5 Gbps via the USB-C and USB-A data ports. Note: The USB C 5Gbps Data port does not support video output.
- HD Display: Connect to the HDMI port to stream or mirror content to an external monitor in resolutions of up to 4K@30Hz. Note: The USB-C ports do not support video output.
- What You Get: Anker 332 USB-C Hub (5-in-1), welcome guide, our worry-free 18-month warranty, and friendly customer service.
How much bandwidth does 320Hz require?
Bandwidth rises with pixels per frame, refresh rate and color data. QHD at 320Hz therefore places a heavier link demand than Full HD at 320Hz. Adding 10-bit color, HDR or another full-quality format can change which timing the monitor offers. There is no single bandwidth number that applies to every “320Hz monitor.”
Outdated Drivers Are Slowing You Down
One free scan finds every outdated or missing driver and matches the right update for your exact hardware.Free scan · exact hardware matchPC Slower Than It Used to Be?
A free scan shows the junk files, broken settings and background clutter dragging Windows down - then fixes them in one click.Free scan · Windows 10 & 11For HDMI, the HDMI Licensing Administrator identifies the certified Ultra High Speed HDMI Cable for configurations up to 48Gbps. That rating is useful when the monitor manual calls for HDMI 2.1 FRL up to 48Gbps, as the Philips QHD manual does. Certification should be checked on the cable’s official label rather than inferred from a seller’s generic “8K” or “gaming” wording. See the HDMI Licensing Administrator’s Ultra High Speed guidance.
For DisplayPort, VESA’s cable ratings are DP40, supporting up to UHBR10 (40Gbps maximum throughput), and DP80, supporting up to UHBR20 (80Gbps maximum throughput). Those figures describe the cable category and a UHBR link; they are not a rule that every 320Hz screen needs a DP80 cable. A monitor using DP 1.4 with DSC may reach its specified mode without a newer UHBR-rated path. VESA’s DisplayPort 2.1 cable announcement and DisplayPort FAQ explain that distinction.
Compression is part of the supported design in some displays. Philips explicitly calls for DisplayPort 1.4 with Display Stream Compression (DSC) for the graphics-card connection in its QHD 320Hz manual. Do not reject a mode simply because a raw, uncompressed calculation appears difficult; first check whether the manufacturer specifies DSC.
Which cable should you buy?
Start with the cable supplied with the monitor. Replace it only when the documented mode requires a different capability or you have a connection problem that the replacement is intended to solve. Dell includes a 1.8m DisplayPort 1.4 cable and a 1.8m HDMI 2.1 TMDS cable with the AW2525HM, so purchasing another cable is not automatically necessary for that display.
Also popular on Amazon
- Sleek 7-in-1 USB-C Hub: Features an HDMI port, two USB-A 3.0 ports, and a USB-C data port, each providing 5Gbps transfer speeds. It also includes a USB-C PD input port for charging up to 100W and dual SD and TF card slots, all in a compact design.
- Flawless 4K@60Hz Video with HDMI: Delivers exceptional clarity and smoothness with its 4K@60Hz HDMI port, making it ideal for high-definition presentations and entertainment. (Note: Only the HDMI port supports video projection; the USB-C port is for data transfer only.)
- Double Up on Efficiency: The two USB-A 3.0 ports and a USB-C port support a fast 5Gbps data rate, significantly boosting your transfer speeds and improving productivity.
- Fast and Reliable 85W Charging: Offers high-capacity, speedy charging for laptops up to 85W, so you spend less time tethered to an outlet and more time being productive.
- What You Get: Anker USB-C Hub (7-in-1), welcome guide, 18-month warranty, and our friendly customer service.
HDMI cable checklist
- Use a certified Ultra High Speed HDMI Cable when your chosen HDMI mode requires up to 48Gbps.
- Check for the official certification label, not just “HDMI 2.1” in a listing title.
- Confirm that both the monitor input and the GPU output support the required HDMI 2.1 FRL mode.
- Remember that a capable cable cannot turn the AW2525HM’s HDMI input into a 320Hz input; Dell specifies that port up to 255Hz.
DisplayPort cable checklist
- Follow the monitor and GPU manufacturers’ recommendation for DP 1.4, DSC or a UHBR connection.
- DP40 and DP80 labels indicate cable-rate capability; DP80 is relevant to a full UHBR20 link, not a generic prerequisite for 320Hz.
- Use a known-good cable when you see dropouts, blanking or a missing refresh option, but verify the mode and ports before assuming the cable is the cause.
- Do not assume a DP 2.1 cable is required when the monitor’s own table specifies DP 1.4.
How do I check compatibility before connecting the monitor?
Use this sequence to avoid buying the wrong cable or discovering a missing 320Hz option after installation.
- Write down the complete target mode. Record the resolution, 320Hz refresh rate, bit depth, RGB/4:4:4 or other chroma format, HDR and VRR requirements. “320Hz” alone is not enough.
- Open the monitor’s official input-mode table. Find the exact model and identify which physical input lists that complete mode. Treat each port separately; do not extrapolate from the monitor’s headline refresh rate.
- Check the graphics card output. The GPU must support the same resolution, refresh rate, color mode and any required HDMI FRL or DP DSC path. Philips specifically states that graphics-card capability determines the available resolution and refresh rate.
- Match the cable to the documented link. Use the included cable if it meets the requirement. For HDMI configurations up to 48Gbps, select a certified Ultra High Speed cable; for DisplayPort, follow the stated DP version and DSC/UHBR guidance.
- Connect directly and select the mode. Avoid assuming that an intermediate device supports the same timing. After connecting, use the operating system and GPU display controls to select the monitor’s 320Hz mode and the intended color depth.
- Verify the result. Confirm that the active signal reports the requested resolution and 320Hz, then check that your selected bit depth, HDR and VRR settings remain enabled. If one setting disappears, consult the table again; the combination may not be supported on that input.
What should you do if 320Hz is missing?
A missing 320Hz option usually means that one part of the signal path does not support the requested combination. Work through the following branches rather than replacing cables at random.
- Check the physical input. On the AW2525HM, 320Hz is a DisplayPort mode while HDMI is limited to 255Hz. Move to DisplayPort if that is your model’s table.
- Check the resolution. A dual-mode Philips display lists FHD 320Hz but UHD 160Hz. If the desktop is set to UHD, 320Hz is not the listed mode; switching to FHD changes the available maximum.
- Check color settings. The Philips QHD table separates 8-bit and qualified 10-bit choices. Try the documented combination rather than assuming every color depth is available at every refresh rate.
- Check DSC or FRL requirements. The Philips manual calls for DP 1.4 with DSC or HDMI 2.1 FRL up to 48Gbps. If the GPU does not provide the required path, the monitor may expose a lower mode.
- Check the GPU specification and cable. Verify the output capability at the source, then use the recommended or certified cable. A better cable cannot compensate for a source or monitor limitation.
- Check the monitor’s current input mode. Some displays expose separate timing tables for each input. Reopen the model-specific manual after changing ports or resolution instead of relying on the monitor’s headline 320Hz marketing claim.
Does DisplayPort 1.4 or HDMI 2.1 automatically guarantee 320Hz?
No. Interface names describe a family of capabilities, while the manufacturer decides which timings to enable on a particular product. Dell’s DP 1.4 input reaches 320Hz at Full HD, but its HDMI input stops at 255Hz; MSI enables QHD 320Hz on both DP 1.4a and HDMI 2.1.
The same principle applies to cable ratings. A DP80 cable or Ultra High Speed HDMI cable provides headroom for its rated link, but it cannot add a missing monitor mode, alter the GPU’s output limits or bypass a requirement for DSC or FRL.
When is HDMI the sensible choice?
Choose HDMI when the monitor lists your exact 320Hz mode on HDMI and the GPU has the matching output. The MSI MAG 274QPF X32 is a concrete case: its specifications list QHD 320Hz on HDMI 2.1 as well as DP 1.4a. HDMI can also be preferable when your setup already uses a certified Ultra High Speed cable and you need the display’s HDMI-specific features.
Also popular on Amazon
- Portable and powerful USB-C HUB: BENFEI USB Type-C HUB, with super-soft and knot-free silicone woven design cable, meets most mobile office needs. Compact, lightweight, stylish, and powerful portable USB C Hub equipped with 1 x HDMI port, 1 x 100W charging, and 3 x USB ports. 18-month warranty, 24-hour response, to ensure you feel at ease when using our product.
- Design centered on comfort and reliability: Thanks to BENFEI's end-to-end in-house cable production capability, in-house PCBA and assembly capability, using the industry's most advanced silicone woven design and process, 20cm cable in length, no knots, super-soft, the HUB is easy to use in all scenarios: laptop, tablet, stand etc. Super-soft, 25000+ life cycles, to meet your daily carrying and office needs.
- 100W Charging: Support up to 90W USB C pass-through charging via Type-C port to keep your laptop powered. 10W is reserved for other interface operations. No data and video function on the Type-C port.
- 4K HDMI Display: The HDMI port supports media display at resolutions up to 4K 30Hz, keeping every incredible moment detailed and ultra vivid. Please note that the C port of the Host device needs to support video output.
- Transfer Files in Seconds: Transfer files and from your laptop at speeds up to 10 Gbps with USB A 3.2 port. Extra 2 USB A 2.0 ports are perfectly for your keyboards and mouse.
Do not choose HDMI solely because “2.1” sounds newer. On a monitor such as the AW2525HM, the HDMI limit is 255Hz, so DisplayPort is required for the full refresh rate.
When is DisplayPort the sensible choice?
Choose DisplayPort when it is the only input rated for 320Hz, when the monitor specifies DP 1.4 with DSC for the desired QHD mode, or when your GPU offers the required DisplayPort output but not the matching HDMI path. Dell’s AW2525HM makes the first case unambiguous, and Philips’ QHD manual documents the second.
DP40 and DP80 labels should be treated as a cable-selection aid, not as a reason to buy the most expensive cable. Match the cable to the monitor’s documented DP requirement and the GPU’s output capability.
Common mistakes to avoid
- Comparing only port generations: DP 1.4 and HDMI 2.1 can have different enabled modes on the same monitor family.
- Ignoring resolution: FHD 320Hz and QHD 320Hz are not equivalent signal loads.
- Ignoring color depth: 8-bit and 10-bit modes may appear as separate entries, as they do in the Philips QHD manual.
- Assuming compression is a defect: DSC can be an explicitly supported part of the DP 1.4 path; follow the manufacturer’s table.
- Buying by marketing shorthand: “8K,” “gaming” or “high speed” on a package is not the same as HDMI certification or a documented DP rating.
- Forgetting the GPU: The monitor cannot receive a timing that the source output does not provide.
- Replacing a working included cable unnecessarily: Dell supplies cables for the AW2525HM; replace one only for a documented capability gap or a connection fault.
How these examples were chosen
The examples cover the three decisions that matter most: whether one input has a lower ceiling, whether both inputs can carry the same QHD 320Hz mode, and whether the manual specifies a color format or transport condition such as DSC or HDMI FRL. The comparison uses current manufacturer specifications and standards guidance, checked November 2026; it does not claim independent testing or a performance ranking.
Frequently asked questions
Do I need DisplayPort 2.1 for a 320Hz monitor?
No. The documented examples include 320Hz modes over DisplayPort 1.4 and 1.4a. VESA says a display does not necessarily need the highest link-rate bandwidth to reach its maximum resolution and refresh rate, so follow the monitor’s specified DP version and any DSC requirement.
Also popular on Amazon
- 【Read before You Buy】 Note: This adapter is USB 2.0 version and cannot transmit HDM, VGA, or other video signals. Nevertheless, they are fully capable of charging devices,duplicating files, and can be seamlessly integrated with USB-C earphones, wireless network adapters, and SD card adapters.
- 【Easy to Use and Safe】Thanks to modern manufacturing techniques, we've made these adapters sufficiently compact so that they can remain inserted in your device without noticeable protrusion or inconvenience. This means you don't have to constantly plug and unplug them, reducing the likelihood of wear and misalignment, and making them more convenient to carry around.
- 【Reliable Quality】Engineered for enhanced durability, durable aluminum alloy shell material,get excellent wear resistance and heat dissipation,the male USB C and female USB connectors & the male USB and female USB C connectors are designed to be plugged and unplugged up to 20000 times. Provides data transfer, device charging, memory space expansion, and additional computer peripherals.
- 【Think more for you】Do you need to connect a USB-C-enabled device to an odd device that only has USB-A ports? Then these USB-A male to USB-C female adapters are made for you.Simply insert the adapter into the USB-A port on the device, and you can instantly connect your USB-C device to the device that originally didn't have the correct connection port.
- 【Trusted xiwxi Quality and Service】As a responsible brand seller, you will receive xiwxi's 12-month Quality assurance and lifetime friendly customer service, you're not just buying a product,you're investing in peace of mind with all-round quality and exceptional customer service.
Can an Ultra High Speed HDMI cable make any HDMI monitor run at 320Hz?
No. The cable is certified for configurations up to 48Gbps, but the monitor and GPU still determine which modes exist. For example, Dell specifies only 255Hz over the AW2525HM’s HDMI input even though Dell includes an HDMI 2.1 cable.
Is QHD 320Hz harder to run than Full HD 320Hz?
It carries more pixels at the same refresh rate, so it generally places a greater link demand. The manufacturer tables illustrate the difference directly: Dell’s 320Hz mode is 1920 × 1080, while MSI and Philips document 2560 × 1440 at 320Hz with additional color and transport conditions.
Can I keep 10-bit color at 320Hz?
Only if the monitor’s input table lists that combination and the GPU and link support it. Philips lists a qualified 10-bit QHD 320Hz option alongside 8-bit entries, but that qualification is model-specific and should not be generalized to every 320Hz display.
Frequently Asked Questions
Do I need DisplayPort 2.1 for a 320Hz monitor?
No. The documented examples include 320Hz modes over DisplayPort 1.4 and 1.4a. VESA says a display does not necessarily need the highest link-rate bandwidth to reach its maximum resolution and refresh rate, so follow the monitor’s specified DP version and any DSC requirement.
Can an Ultra High Speed HDMI cable make any HDMI monitor run at 320Hz?
No. The cable is certified for configurations up to 48Gbps, but the monitor and GPU still determine which modes exist. For example, Dell specifies only 255Hz over the AW2525HM’s HDMI input even though Dell includes an HDMI 2.1 cable.
Is QHD 320Hz harder to run than Full HD 320Hz?
It carries more pixels at the same refresh rate, so it generally places a greater link demand. The manufacturer tables illustrate the difference directly: Dell’s 320Hz mode is 1920 × 1080, while MSI and Philips document 2560 × 1440 at 320Hz with additional color and transport conditions.
The Tool Desk
Outbyte PC Repair FREERepair Windows errors before they cause bigger problemsFix Now →Outbyte Driver Updater FREEScan for outdated or missing drivers - takes under a minuteDriver Scan →Can I keep 10-bit color at 320Hz?
Only if the monitor’s input table lists that combination and the GPU and link support it. Philips lists a qualified 10-bit QHD 320Hz option alongside 8-bit entries, but that qualification is model-specific and should not be generalized to every 320Hz display.

