Some links on this page are affiliate links: if you buy through them we may earn a commission, at no extra cost to you.
Data centers and solar farms cannot be ranked by a single “resource use” number. A data center is an electricity-consuming facility that operates continuously; a solar farm is an electricity-generating facility whose output varies with sunlight. In the United States, data centers used an estimated 176 TWh of electricity in 2023, while utility-scale solar planning commonly assumes 4–7 acres of land per installed MW. Their water footprints also use different boundaries: solar’s operational water is mainly panel washing, whereas data centers have both direct cooling water and an indirect water footprint from electricity generation.
The fairest answer depends on what is being measured: a facility parcel, a complete energy-supply footprint, annual electricity, instantaneous capacity, direct water, or water associated with purchased power. Once those definitions are explicit, the comparison becomes useful instead of producing a misleading winner.
As an Amazon Associate I earn from qualifying purchases.
At a glance
| Name | Best for | Key spec | Checked |
|---|---|---|---|
| U.S. data centers | Continuous computing and digital services | 176 TWh electricity use in 2023; 66 billion liters direct water and nearly 800 billion liters indirect water estimated for 2023 | November 2026 |
| Utility-scale solar farms | Generating grid electricity from sunlight | 4–7 acres per installed MW; 5–8 acres/MW with battery storage; 0.05–0.35 acre-feet operational water per MW-year | November 2026 |
These rows describe different kinds of assets. The data-center figures are national annual totals, while the solar figures are project-planning assumptions normalized by installed capacity. They should be read as starting points for a defined comparison, not as directly interchangeable scores.
What is the basic difference between a data center and a solar farm?
A data center is a load: servers, networking equipment, cooling systems and electrical infrastructure consume power. A solar farm is a generator: photovoltaic panels convert sunlight into electricity, but production changes by hour, season, weather and project design. Comparing a data center’s annual consumption directly with a solar project’s nameplate capacity mixes unlike measurements.
Popular on Amazon
- 【90 Degree Full Function USB C Adapter】Supports the latest USB4 standard for up to 40Gbps of bandwidth, 8K video support, and up to 240W Fast charging; Support USB PD 3.1 Extended Power Range (EPR) including 140W, 180W and 240W. Your productivity is easily doubled. *Warm Tip: For the best fit, please make sure the USB-C port is fully exposed; thick or bulky cases may affect compatibility.
- 【Reliable Quality】Made from high-quality, scratch-resistant aluminum alloy, delicate metal frame. get excellent wear resistance and heat dissipation. Non-Slip Design for easier insertion and removal.
- 【Small and portable】Ultra thin size, ultra compact design, a petite physique that matches the minimalist design of your modern laptops. Coming with a slim figure that won't block the port next to the one it's plugged into.
- 【Compatibility】Widely work with most usb c, thunderbolt 4/3 devices. Compatibilit for ROG Ally, Steam Deck, Switch, MacBook Pro, Quest 3 VR headset, Surface Book 2, iPhone 18/17/16/15, Samsung Galaxy S23/S22/S21, Note 20/10, Google Pixel, ChromeBook, etc.
- 【Excellence Customer Support】If you experience any issues or cable failure, simply reach out to our dedicated customer service team. We provide a prompt response within 18 hours, providing you with the necessary technical support to resolve any concerns.
The most defensible comparison matches the same boundary and denominator—for example, annual megawatt-hours of solar generation against a specified data center’s annual demand, or the developed land and water use of each complete project. A solar farm’s nameplate MW is not a promise of firm, around-the-clock electricity, and the sources used here do not establish one universal capacity factor.
This distinction also affects everyday language. Saying a solar farm is a “100-MW facility” describes its installed capacity at a particular rating. Saying data centers used 176 TWh describes energy consumed over an entire year. A 100-MW solar project will generate a variable annual total, not 100 MW every hour. A data center may draw a substantial load continuously, with peaks and operating changes that depend on its computing work.
Windows Errors? Fix Them Before They Spread
Repair common Windows errors and clear accumulated junk for a smoother, more stable PC - no reinstall needed.Free scan · no reinstallOutdated Drivers Are Slowing You Down
One free scan finds every outdated or missing driver and matches the right update for your exact hardware.Free scan · exact hardware matchHow much electricity do U.S. data centers use?
The U.S. Department of Energy’s Federal Energy Management Program estimated that data centers consumed 176 TWh in 2023, about 4.4% of total U.S. electricity use. That was more than twice the approximately 70 TWh estimated for 2014. The figures and definitions are in the DOE 2025 Data Center Energy Efficiency fact sheet.
DOE projects compound annual growth of roughly 13% to 27% from 2023 through 2028. This is a modeled growth range, not a measured result. A separate Lawrence Berkeley National Laboratory analysis gives a wider scenario range of 325–580 TWh in 2028, equivalent to about 6.7%–12.0% of forecast U.S. electricity consumption. The spread reflects uncertainty about GPU shipments and utilization, operating practices and cooling choices.
Those two projections should not be collapsed into one supposedly precise forecast. They represent scenarios under different assumptions about how quickly computing demand grows and how efficiently facilities operate. The high and low cases are useful for planning transmission, generation and water resources, but they are not a guarantee that every data center will follow the national average.
These totals include the whole data-center electricity requirement rather than only the servers. Computing hardware, storage, networking, power conversion, backup systems, lighting and cooling all contribute. A facility that runs intensive artificial-intelligence workloads can have a different load profile from a conventional enterprise or colocation site, so a national average should not be treated as a site-specific forecast.
Free tools Windows power users keep installed
One-click scans. No signup required.
For a project comparison, request the facility’s annual load in MWh or TWh, its peak demand, expected growth and the boundary used to calculate those figures. A utility interconnection request, an IT-only estimate and a whole-campus meter reading can describe different quantities. Without that clarification, a solar project may appear to “match” a data center simply because its nameplate number looks similar.
How should readers interpret a solar farm’s power rating?
Installed MW is a capacity measure. It indicates the rated output of the photovoltaic equipment under defined conditions, not the amount of electricity delivered over a year. Annual generation depends on sunlight, weather, orientation, tracking, curtailment, equipment performance and the project’s grid connection. The reviewed sources do not provide a universal capacity factor, so a credible estimate must come from the specific project or its engineering study.
That is why a fair power comparison uses annual generation in MWh or TWh and then checks the timing of production. A solar farm may produce more electricity in some daytime hours than a data center needs and none at night. Storage, grid purchases, firm generation or other arrangements can fill those gaps, but each changes the project’s land, equipment and operating assumptions.
Power-purchase agreements add another accounting issue. A contract can assign the financial or environmental attributes of solar output to a buyer without locating the panels at the data-center campus. The arrangement may support a market-based electricity claim, but it does not mean the physical electrons delivered at every moment came from that project. Reliability and the physical grid mix still matter when assessing operations and indirect water.
Recommended Free Tools
Also popular on Amazon
- 5-in-1 Connectivity: Equipped with a 4K HDMI port, a 5 Gbps USB-C data port, two 5 Gbps USB-A ports, and a USB C 100W PD-IN port. Note: The USB C 100W PD-IN port supports only charging and does not support data transfer devices such as headphones or speakers.
- Powerful Pass-Through Charging: Supports up to 85W pass-through charging so you can power up your laptop while you use the hub. Note: Pass-through charging requires a charger (not included). Note: To achieve full power for iPad, we recommend using a 45W wall charger.
- Transfer Files in Seconds: Move files to and from your laptop at speeds of up to 5 Gbps via the USB-C and USB-A data ports. Note: The USB C 5Gbps Data port does not support video output.
- HD Display: Connect to the HDMI port to stream or mirror content to an external monitor in resolutions of up to 4K@30Hz. Note: The USB-C ports do not support video output.
- What You Get: Anker 332 USB-C Hub (5-in-1), welcome guide, our worry-free 18-month warranty, and friendly customer service.
How much land does a solar farm need?
The DOE’s 2024 utility-scale solar programmatic environmental impact statement uses 4–7 acres per MW of installed photovoltaic capacity as a planning assumption. Projects that include battery storage use 5–8 acres per MW in that planning range. The estimates are not guarantees for every project; terrain, setbacks, array design, roads, drainage, substations and other site constraints can change the result.
The broader project footprint can exceed the panel field. Transmission lines, substations, water pipelines, telecommunications links, operations buildings and temporary construction areas may add land requirements. A parcel’s total acreage also may include buffers or land that remains undeveloped inside the project boundary, so “project acres” and “directly occupied acres” are not interchangeable.
For a simple planning example, a 100-MW PV project would correspond to roughly 400–700 acres under DOE’s assumption before site-specific additions. A 100-MW project paired with storage would correspond to roughly 500–800 acres under the same planning framework. Those are capacity-based estimates, not annual energy production figures.
The same arithmetic can be used for an early screening exercise, but it should remain labeled as a planning range. A 500-MW PV proposal, for example, would map to roughly 2,000–3,500 acres before additional project components under the 4–7-acre assumption. If storage is included, the corresponding planning range would be roughly 2,500–4,000 acres. Final permitting documents may show a different total because of setbacks, terrain, habitat protections, access roads or a larger transmission corridor.
Land quality matters as well as acreage. A project boundary can contain areas that are not covered by panels but are reserved for buffers, drainage or future equipment. Conversely, an apparently compact array may depend on a distant substation or new transmission line. Ask whether a quoted number means the fenced parcel, the permanent disturbance area, the temporary construction area or the full connected infrastructure footprint.
How much land does a data center need?
The cited sources do not establish a standardized U.S. data-center acreage-per-MW benchmark that can be compared directly with the DOE solar range. A campus may contain server buildings, cooling plants, substations, generators, fuel storage, security setbacks, parking, roads and expansion areas. Two facilities with similar IT loads can therefore occupy very different parcels.
There is also a boundary question. Counting only the building footprint understates land associated with a campus, while assigning all land used by remote power plants or transmission infrastructure to the data center creates a broader energy-supply footprint. The reviewed sources support making that distinction, but they do not provide a universal data-center land-intensity value.
For that reason, the careful answer to “which uses more land?” is conditional. Solar land use can be estimated per installed MW using the DOE planning range. Data-center land use requires a defined campus boundary and a stated capacity or annual-demand denominator; without those, a ranking would be false precision.
Expansion plans can further complicate the comparison. A site may reserve land for additional server halls, cooling equipment or substations that are not yet operating. Excluding that reserve can understate the planned campus footprint; including it can make a new facility look larger than its current load warrants. Report current, permitted and ultimate build-out areas separately when those values are available.
Do data centers use more water than solar farms?
There is no universal winner because the available figures measure different things. Utility-scale PV’s DOE planning range for operational water use is 0.05–0.35 acre-feet per MW per year, including panel washing and other uses. Construction water is listed separately at 0.13–3.9 acre-feet per MW per year during the construction period. The figures appear in the DOE 2024 utility-scale solar programmatic EIS.
Also popular on Amazon
- Sleek 7-in-1 USB-C Hub: Features an HDMI port, two USB-A 3.0 ports, and a USB-C data port, each providing 5Gbps transfer speeds. It also includes a USB-C PD input port for charging up to 100W and dual SD and TF card slots, all in a compact design.
- Flawless 4K@60Hz Video with HDMI: Delivers exceptional clarity and smoothness with its 4K@60Hz HDMI port, making it ideal for high-definition presentations and entertainment. (Note: Only the HDMI port supports video projection; the USB-C port is for data transfer only.)
- Double Up on Efficiency: The two USB-A 3.0 ports and a USB-C port support a fast 5Gbps data rate, significantly boosting your transfer speeds and improving productivity.
- Fast and Reliable 85W Charging: Offers high-capacity, speedy charging for laptops up to 85W, so you spend less time tethered to an outlet and more time being productive.
- What You Get: Anker USB-C Hub (7-in-1), welcome guide, 18-month warranty, and our friendly customer service.
LBNL estimates that U.S. data centers directly consumed approximately 66 billion liters of water in 2023. It also estimates an indirect water footprint of nearly 800 billion liters associated with the electricity used by those data centers. The indirect estimate is based on the grid mixes assigned to data-center locations; it does not incorporate individual power-purchase agreements or behind-the-meter generation, so it is not a metered total for every facility.
The indirect estimate is much broader than water flowing through a data-center cooling system. It represents water associated with producing the electricity assigned to data-center locations. A facility with low on-site water use can still be linked to an electricity mix that has a substantial water requirement, while a different grid mix or on-site generation arrangement could change that result.
The Tool Desk
Outbyte PC Repair FREEClear out junk files and repair common Windows errorsFree Scan →Outbyte Driver Updater FREEFix the driver behind crashes, sound loss and screen glitchesFind Drivers →LBNL defines consumption as: Water consumption refers to the amount of withdrawn water that is permanently removed from the immediate water cycle due to evaporation or other irreversible processes.
This distinction matters because a withdrawal is water taken from a source, while consumption is the portion not returned to that immediate cycle. A source can report large withdrawals with lower consumption, or vice versa, depending on cooling and treatment systems.
What is included in solar’s operational water estimate?
The DOE range is a planning assumption for the operating phase of utility-scale PV. It includes panel washing and other operational uses. Washing frequency can vary with dust, rainfall, local rules and the project’s cleaning approach, so the range should not be treated as a universal meter reading for every array.
Construction water is reported separately because it occurs during a different phase and can be temporary. The 0.13–3.9 acre-feet-per-MW range for construction should not be added automatically to the annual operating range as though both were recurring yearly demands. A life-cycle comparison would need to state how construction water is allocated over the project’s service period and whether manufacturing and other upstream processes are included; the cited planning table does not answer those broader questions.
Solar design can also affect water and land together. Tracking equipment, access roads, panel spacing, dust conditions and storage equipment may alter the developed footprint and the practical need for washing. A project proposal should identify which components are inside the acreage and water estimates rather than relying on a generic “solar farm” label.
What’s actually slowing this PC down?
Pick the symptom - the matching free tool is one click away.
Why is the water comparison so difficult?
First, the denominators differ. Solar water is expressed per installed MW per year. The data-center figures are national annual totals. To compare them, you would need a particular solar project’s annual water use and a particular data center’s annual direct and indirect water use, with the same geographic and accounting boundaries.
Second, direct and indirect water are separate categories. A data center may use water on site for cooling, but the power it purchases can also require water at power plants. Conversely, a solar farm’s operational water is generally limited, yet manufacturing, construction and associated grid infrastructure sit outside the operational range quoted above.
Third, technology and climate change the result. Cooling design, local temperature and humidity, water availability, panel-cleaning practices, solar tracking, dust conditions and battery configuration all affect resource use. A dry site with infrequent washing and a water-efficient cooling system will not have the same profile as a dusty solar site and a water-intensive cooling design.
Fourth, location changes the electricity-related footprint. LBNL assigned regional grid mixes to data-center locations for its indirect estimate. That method is useful for a national assessment, but it does not capture every facility’s power-purchase agreement or behind-the-meter generation. A site-specific analysis should disclose the electricity source, contract treatment and whether the result is measured or modeled.
Quick wins for a faster PC:
Fix the driver behind crashes, sound loss and screen glitchesFind Drivers →Repair Windows errors before they cause bigger problemsFix Now →Scan for outdated or missing drivers - takes under a minuteDriver Scan →Also popular on Amazon
- Portable and powerful USB-C HUB: BENFEI USB Type-C HUB, with super-soft and knot-free silicone woven design cable, meets most mobile office needs. Compact, lightweight, stylish, and powerful portable USB C Hub equipped with 1 x HDMI port, 1 x 100W charging, and 3 x USB ports. 18-month warranty, 24-hour response, to ensure you feel at ease when using our product.
- Design centered on comfort and reliability: Thanks to BENFEI's end-to-end in-house cable production capability, in-house PCBA and assembly capability, using the industry's most advanced silicone woven design and process, 20cm cable in length, no knots, super-soft, the HUB is easy to use in all scenarios: laptop, tablet, stand etc. Super-soft, 25000+ life cycles, to meet your daily carrying and office needs.
- 100W Charging: Support up to 90W USB C pass-through charging via Type-C port to keep your laptop powered. 10W is reserved for other interface operations. No data and video function on the Type-C port.
- 4K HDMI Display: The HDMI port supports media display at resolutions up to 4K 30Hz, keeping every incredible moment detailed and ultra vivid. Please note that the C port of the Host device needs to support video output.
- Transfer Files in Seconds: Transfer files and from your laptop at speeds up to 10 Gbps with USB A 3.2 port. Extra 2 USB A 2.0 ports are perfectly for your keyboards and mouse.
Fifth, water availability is local. Two projects with similar annual consumption can pose different practical concerns if one is in a water-constrained basin and the other is not. The quantity, source and timing of water withdrawals matter alongside the annual total. A national number should not be used to make a local permitting decision without additional site information.
Can a solar farm supply a data center’s power?
It can contribute substantially, but a solar farm alone does not automatically provide continuous power. Solar output falls to zero at night and varies with clouds and seasons, while a data center generally requires reliable electricity every hour. Continuous service therefore requires some combination of grid supply, storage, firm generation, demand management or other contractual arrangements.
A valid energy-matching analysis should compare a data center’s annual demand in MWh with a solar project’s modeled annual generation in MWh, then examine hourly timing and reliability. Adding batteries changes both the land assumption and the operating profile; DOE’s planning range rises from 4–7 to 5–8 acres per MW when storage is included. The cited sources do not provide a universal storage duration or capacity factor, so those values must come from a specific project study.
Reliability has several layers. The data center needs enough instantaneous capacity for its peak load, enough energy over a billing period and a plan for prolonged low-sun conditions. A nameplate comparison addresses only one of those layers. A complete proposal should show the interconnection, backup equipment, storage duration, dispatch rules and how critical loads are protected during an outage.
Do these 3 things before closing this tab:
1Repair Windows errors before they cause bigger problems2Scan for outdated or missing drivers - takes under a minute3Clear out junk files and repair common Windows errorsPower-purchase agreements can assign the financial or accounting attributes of solar generation without placing panels at the data-center site. That arrangement may reduce market-based emissions claims, but it does not mean the physical electrons arriving at the facility are solar-generated at every moment. The physical grid mix remains relevant to indirect water and reliability analysis.
Independent reader supportYour contribution helps us test, update, and keep practical guides available for everyone.Which factors matter when siting either facility?
Location can reverse a superficial ranking. Solar developers evaluate solar resource, slope, land-use conflicts, transmission access, environmental constraints and construction logistics. Data-center developers evaluate fiber connectivity, latency, reliable grid capacity, backup generation, cooling conditions, water availability, permitting and room for expansion.
The USGS synthesis on colocating AI data centers with energy infrastructure identifies reliable power and water availability as siting considerations. Its spatial analysis does not evaluate water availability or several other sensitive resources, so its maps should not be read as a complete suitability determination. Read the USGS 2026 science synthesis for that scope.
Transmission can be decisive for both facilities. A solar project may need new lines or substations to deliver output. A data center may need a high-capacity interconnection and redundant feeds. Those additions consume land and can create construction impacts that are missed when only the primary parcel is counted.
Climate affects both operations and planning. A hot or humid location can change cooling requirements at a data center. A dusty or dry location can change panel-washing practices at a solar farm. These effects do not justify a universal ranking; they show why project-level assumptions belong beside national estimates.
Water and power should also be evaluated together. A data center may have reliable electrical capacity but limited water availability, or access to water but an interconnection that cannot support its expected load. A solar farm may have excellent sunlight but require a costly transmission build-out. A site that looks efficient on one metric can be constrained by another.
Also popular on Amazon
- 【Read before You Buy】 Note: This adapter is USB 2.0 version and cannot transmit HDM, VGA, or other video signals. Nevertheless, they are fully capable of charging devices,duplicating files, and can be seamlessly integrated with USB-C earphones, wireless network adapters, and SD card adapters.
- 【Easy to Use and Safe】Thanks to modern manufacturing techniques, we've made these adapters sufficiently compact so that they can remain inserted in your device without noticeable protrusion or inconvenience. This means you don't have to constantly plug and unplug them, reducing the likelihood of wear and misalignment, and making them more convenient to carry around.
- 【Reliable Quality】Engineered for enhanced durability, durable aluminum alloy shell material,get excellent wear resistance and heat dissipation,the male USB C and female USB connectors & the male USB and female USB C connectors are designed to be plugged and unplugged up to 20000 times. Provides data transfer, device charging, memory space expansion, and additional computer peripherals.
- 【Think more for you】Do you need to connect a USB-C-enabled device to an odd device that only has USB-A ports? Then these USB-A male to USB-C female adapters are made for you.Simply insert the adapter into the USB-A port on the device, and you can instantly connect your USB-C device to the device that originally didn't have the correct connection port.
- 【Trusted xiwxi Quality and Service】As a responsible brand seller, you will receive xiwxi's 12-month Quality assurance and lifetime friendly customer service, you're not just buying a product,you're investing in peace of mind with all-round quality and exceptional customer service.
How should you make a fair land, water and power comparison?
- Define the geography and year. The figures here are U.S.-focused, with 2023 data-center estimates and 2024 DOE solar planning assumptions. Do not combine them with a different country or year without relabeling the analysis.
- Set the boundary. Decide whether the comparison covers only the facility parcel, the connected transmission and substation infrastructure, or the broader electricity-supply chain.
- Use compatible power units. Compare annual demand with annual generation in MWh or TWh. Treat installed MW as capacity, not energy delivered.
- Separate water withdrawal from consumption. Report on-site direct water and electricity-related indirect water separately, and state whether each number is measured, modeled or a planning assumption.
- Document technology. Record cooling method, climate, panel-washing practice, tracking design, battery inclusion and backup-power configuration.
- Check reliability. Identify how nighttime and low-sun periods are covered. A solar-only nameplate calculation is not a 24/7 supply plan.
- Show uncertainty. Use ranges where the source provides ranges—such as 4–7 acres/MW or 325–580 TWh—and explain the drivers instead of reporting a single midpoint as a fact.
- Report phases separately. Distinguish construction land and water from recurring operational use, and identify temporary facilities or expansion areas.
- State the accounting method. Explain whether electricity-related water is assigned by regional grid mix, a contract, on-site generation or direct measurement.
What do the numbers support—and what do they not support?
The evidence supports several firm conclusions. U.S. data centers are already a major electricity load at 176 TWh in 2023, and credible projections show substantial growth. Utility-scale PV commonly requires several acres per installed MW, with a higher planning range when batteries are included. Solar’s operational water use is comparatively defined in project-planning terms, while data centers have both direct and modeled indirect water footprints.
The evidence does not support a universal statement that data centers always use more land or water than solar farms. It does not provide a standard data-center acres-per-MW metric, a single solar-water value for every climate and design, or a global comparison. Nor does it justify treating the nearly 800-billion-liter indirect data-center estimate as a facility-specific meter reading.
It also does not support treating all solar capacity as firm replacement power for a data center. Annual generation, hourly production, storage and backup arrangements must be documented. Likewise, a data center’s direct water meter alone does not capture the full electricity-related water footprint when that boundary is relevant.
The practical conclusion is to compare like with like: a specified data-center campus and load against a specified solar project, annual generation profile and complete infrastructure footprint. Without those definitions, a headline ranking hides more than it reveals.
Frequently Asked Questions
Can solar power keep a data center running during a grid outage?
Not by itself. Solar panels stop producing at night and can be curtailed during an outage; maintaining service requires islanding-capable controls, storage and/or dispatchable backup equipment sized for the facility’s critical load.
Does adding batteries always reduce a solar project’s environmental footprint?
No. Batteries can shift solar output into evening hours, but they add equipment, land and supply-chain impacts. DOE’s planning assumption increases from 4–7 acres per MW for PV to 5–8 acres per MW when storage is included.
The Tool Desk
Outbyte Driver Updater FREEFix the driver behind crashes, sound loss and screen glitchesFind Drivers →Outbyte PC Repair FREERepair Windows errors before they cause bigger problemsFix Now →What is the difference between water withdrawal and water consumption?
Withdrawal is water taken from a river, aquifer or utility system. Consumption is the portion permanently removed from the immediate water cycle through evaporation or other irreversible processes, as defined by LBNL.
Why can two data centers with similar server capacity have different water footprints?
Cooling architecture, local climate, operating temperatures, electricity source and water-treatment practices differ by site. The grid mix can add a substantial indirect water component even when on-site cooling water is low.
How much land would a 100-MW solar farm need?
Under DOE’s planning assumption, about 400–700 acres for PV before site-specific additions. With battery storage, the corresponding range is about 500–800 acres. The figures are capacity-based and do not represent annual electricity production.
The Bottom Line
Bottom line: Data centers are continuous electricity loads with direct and electricity-related water footprints; solar farms are variable generators that commonly need several acres per installed MW. The answer to which uses more land or water depends on matched boundaries, technology, location, annual energy and reliability requirements—not on a single headline number.

