Some links on this page are affiliate links: if you buy through them we may earn a commission, at no extra cost to you.
Comparing phone benchmark scores across AnTuTu versions requires more than putting two totals side by side. The reliable rule is to compare results only when the same major AnTuTu version and same operating-system platform were used; a V12 score and a V11 score are not directly comparable. AnTuTu says its V12 test-suite changes alter scores for the same device, and its earlier V10 release notes give the same warning for V10 versus V9.
If version or platform differs, label the mismatch clearly and treat the figures as historical context—not as a conversion, ranking, or measured percentage advantage.
As an Amazon Associate I earn from qualifying purchases.
Can I compare an AnTuTu V12 score with a V11 score?
No. AnTuTu’s official V12 announcement says that scores from different AnTuTu versions are not directly comparable because the test suite and scoring context changed. A V12 result and a V11 result can describe the same phone differently without any hardware change.
The same principle is not unique to V12. In its V10 open-beta notes, AnTuTu changed CPU, GPU, storage and UX tests, warned that a device would generally score higher in V10 than V9, and then emphasized that the two versions “can NOT be compared with each other.” That directional observation is historical context, not a conversion formula for other version pairs.
Popular on Amazon
- 【Strong Adsorption】The inspiration of the silicone phone suction case comes from the adhesive force of the octopus. Each suction cup phone mount is 3.15 inches long and 2.17 inches wide, with 24 independent suction cups providing a stronger and more stable suction force, so you don't have to worry about your phone falling during use.
- 【Back of Phone Suction Grip】Remove the adhesive film on the phone suction cup and stick it on the phone case. You can then fix the phone on any smooth surface, which is very convenient. (The phone suction cup cannot be removed and reused after being attached to the phone case. It is recommended to attach it to a regular phone case, not a valuable one.)
- 【Widely Used】Our non-slip silicone phone sticky grip mount attaches to almost any flat phone case and make it compatible with common mobile phones such as iPhone and Android.You can shoot, watch videos or video calls in the kitchen, gym, dance studio, bathroom and other places.
- 【Capture the Wonderful Picture】Whether you are a TikTok creator or just like to share videos and photos, this phone suction cup can help you hands-free capture wonderful videos and photos for sharing with friends.
- 【Note】You can fix the phone suction cup on a smooth surface such as a mirror or glass. If necessary, wipe the suction cup with a damp cloth to obtain stronger suction. Before releasing your hand, make sure the phone is firmly fixed. (Not applicable to rough walls, wooden surfaces, and other uneven surfaces)
For a defensible comparison, match the major version first, then match the operating system, phone configuration and test conditions as closely as the available records allow.
What does “same AnTuTu version” actually mean?
Start with the major release label: V12 with V12, V11 with V11, and so forth. A result described only as “AnTuTu 1.2 million” is incomplete because the number has no identifiable scale. Record the full app or build number whenever it appears in the screenshot or listing, but do not treat a minor build number as permission to combine different major releases.
Free tools Windows power users keep installed
One-click scans. No signup required.
For example, two Android results labeled V12.x belong in the same initial comparison group, while a V12.x result and a V11.x result belong in separate groups. If one source gives only “AnTuTu 12” and another gives a complete build number, preserve both labels and mark the less precise record as incomplete rather than guessing.
Beta status also belongs in the record. AnTuTu’s V12 announcement was a public-beta announcement dated September 22, 2026, and its V10 information came from an open-beta announcement dated May 25, 2023. A beta result should be dated and identified as beta so readers do not mistake it for an identical release context.
Why do AnTuTu scores change when the phone does not?
AnTuTu is a suite of workloads, not a fixed ruler. When the workloads, rendering path, weighting or scoring implementation changes, the numerical scale changes too. A newer result can therefore reflect a different measurement design rather than a faster or slower device.
What changed in V12?
AnTuTu’s V12 public-beta announcement, dated September 22, 2026, describes changes in all four major areas:
Do these 3 things before closing this tab:
1Clear out junk files and repair common Windows errors2Fix the driver behind crashes, sound loss and screen glitches3Repair Windows errors before they cause bigger problems- CPU: workloads were adjusted to better represent intended real-world user behavior, with new or refined coverage.
- GPU: the graphics pipeline was optimized and scenes were updated.
- Memory: V12 adds a dynamic memory-latency stress test.
- UX: the user-experience suite was upgraded, including system-rendering and response behavior.
AnTuTu explicitly connects those suite changes to different scores on the same device and says V12 and V11 results are not directly comparable. Do not treat the difference as a simple percentage uplift or apply a multiplier to translate one version into another.
What changed in V10?
The V10 open-beta notes provide an earlier example. They mention CPU parallel-processing and API-dependence changes, new Unreal Engine 4 GPU scenes, storage-test changes and additional UX cases. Because the measured work changed, AnTuTu warned readers not to compare V10 and V9 scores. This precedent is useful for understanding the rule, but it does not establish how any other pair of versions will differ.
Also popular on Amazon
- SUPERIOR COMFORT — Unlike traditional circular ear buds, the design of EarPods is defined by the geometry of the ear. Which makes them more comfortable for more people than any other ear bud–style headphones.
- HIGH-QUALITY AUDIO — The speakers inside EarPods have been engineered to maximize sound output and minimize sound loss, which means you get high-quality audio.
- BUILT-IN REMOTE — EarPods with USB-C plug also include a built-in remote that lets you adjust the volume, control the playback of music and video, and answer or end calls with a pinch of the cord.
- COMPATIBILITY — Works with all devices that have a USB-C port.
- INTEGRATED MICROPHONE — A built-in microphone precisely captures your voice while you’re on the phone, taking a FaceTime call, or summoning Siri — so you’re always heard loud and clear.
What must match before two phone scores are comparable?
A same-version label is necessary but not sufficient. Record the context around each result so a reader can tell whether the comparison is genuinely like-for-like.
| Comparison axis | What to record | Why it matters |
|---|---|---|
| AnTuTu release | Exact major version, and the full app/build number when shown | Major releases can change workloads and scoring; minor builds can also alter availability or fixes. |
| Platform | Android or iOS/iPadOS | AnTuTu implements the benchmark differently on each operating system. |
| Phone identity | Model, regional variant and chipset | A model name can cover multiple memory, modem or processor configurations. |
| Configuration | RAM and storage capacity, firmware/build, performance mode and cooling setup if reported | Configuration and power policy can affect sustained workloads. |
| Result detail | Total plus CPU, GPU, MEM and UX component scores | Components show which part of the suite accounts for a difference. |
| Date | When the score was produced or captured | Software updates and benchmark releases can change the context over time. |
| Conditions | Temperature, battery level, display brightness, charger state and other stated settings | Thermal and power conditions can influence a run, especially under sustained load. |
If a source omits one of these fields, mark it as “not reported” rather than filling the gap with an assumption. A comparison with missing context is weaker, even when both screenshots appear to show the same app.
Windows Errors? Fix Them Before They Spread
Repair common Windows errors and clear accumulated junk for a smoother, more stable PC - no reinstall needed.Free scan · no reinstallOutdated Drivers Are Slowing You Down
One free scan finds every outdated or missing driver and matches the right update for your exact hardware.Free scan · exact hardware matchHow do I compare AnTuTu results step by step?
- Collect the original result. Prefer a screenshot or published result that shows the app version, operating system and phone model. A headline that says only “AnTuTu score” is incomplete.
- Normalize the major version. Put V12 results in one group, V11 in another, and so on. Never merge groups merely because the totals look similar.
- Separate platforms. Keep Android and iOS/iPadOS in different tables. AnTuTu’s platform guidance says the implementations, methods and graphics APIs differ.
- Confirm the device configuration. Check RAM, storage, chipset variant, firmware and performance mode. Note whether the phone was plugged in or using an external cooler.
- Capture the total and four components. Copy the CPU, GPU, MEM and UX values exactly as displayed. If only a total is available, say that component analysis is unavailable.
- Record the date and conditions. Include the run date and any stated temperature, battery, brightness or mode. Keep unknown fields visibly unknown.
- Compare within the cleanest group first. Rank or discuss phones only inside the same major-version and platform group, with similar configurations and conditions.
- Explain residual differences. If one result used a different firmware, memory size or performance mode, surface that limitation next to the conclusion.
This process does not create a universal score conversion. It creates a transparent comparison whose boundaries a reader can audit.
How should I format a reproducible score comparison?
Use one row per result and keep the version and platform in the row, not only in a caption. A compact record can look like this:
| Phone/configuration | AnTuTu version | Platform | Date | Total | CPU | GPU | MEM | UX | Conditions and notes |
|---|---|---|---|---|---|---|---|---|---|
| Model and RAM/storage variant | V12.x | Android | YYYY-MM-DD | Published value | Published value | Published value | Published value | Published value | Temperature, battery, brightness, mode, firmware |
| Second model/configuration | V12.x | Android | YYYY-MM-DD | Published value | Published value | Published value | Published value | Published value | Differences or “not reported” |
Do not mix a V12.x row with a V11.x row in the same ranking. If you must show both, use separate sections and a prominent note that the totals are on different scales.
Use a comparison status, not just a rank
A useful table can add a simple status column: matched when major version, platform and configuration are aligned; partially matched when one condition is unknown or different; and context only when the major version or platform differs. This prevents a visually tidy table from implying a level of precision the records do not support.
Keep the original units and values. Do not round one score to millions while leaving another to the nearest point if the rounding could change their order. If a source publishes only a rounded total, reproduce that rounding and state that the underlying value is unavailable.
Which test conditions should I record?
Use the conditions the source actually reports; do not present AnTuTu’s reference setup as a universal requirement. For its V12 reference scores, AnTuTu stated a room temperature of 26°C ± 1°C, battery above 80% and display brightness fixed at 300 nits. Those figures describe the cited reference runs, not every phone benchmark.
Also popular on Amazon
- Secure Hold: Our PopSockets adhesive phone grip gives your cell phone a secure, comfortable hold in hand to help prevent drops while texting, taking photos, or scrolling on the go. Designed to stick firmly to most phone cases and devices.
- Hands-Free Made Easy: Easily turn your PopSocket into a phone stand to prop up your phone anywhere, perfect for watching videos, video calls, or following recipes. A must-have phone holder that keeps your device secure and ready for anything.
- Compatibility: Works with all phones, tablets, and Kindles. Sticks best to smooth, hard plastic cases and may not adhere to silicone or textured cases. Easily swap your PopTop to change up your style.
- Black PopSockets: Simple, refined, and endlessly versatile. A timeless essential for any phone.
- Travel Must-Have for People On the Go: A must-have travel accessory for flights, flying, airports, air travel, airplanes, planes, international trips, cruises, and long travel days. Key gadget for your airport haul, travel accessories and must-haves.
Also record performance mode, refresh-rate setting, charger connection, fan or cooler use, recently installed updates and whether the phone was warm from earlier workloads. If none of those details are available, write “conditions not reported.” That is more accurate than claiming the runs were performed under identical conditions.
Separate controlled examples from universal requirements
The 26°C ± 1°C temperature, above-80% battery and 300-nit brightness figures are useful because they show how AnTuTu described its own V12 reference runs. They do not prove that every review, retail listing or user screenshot followed those settings. When reproducing a test, you may report your settings and explain any differences, but do not label AnTuTu’s example setup as a mandatory certification procedure.
Quick wins for a faster PC:
Clear out junk files and repair common Windows errorsFree Scan →Fix the driver behind crashes, sound loss and screen glitchesFind Drivers →Can I compare AnTuTu Android and iOS scores?
Not as a direct cross-platform ranking. AnTuTu says its Android and iOS versions are different software with different methods and graphics APIs: iOS uses Metal, while Android testing uses OpenGL ES and Vulkan paths. Its published guidance is to compare within the same operating system and the same major version, not across platforms or releases.
The official platform-comparison guidance explains that different rendering mechanisms and hardware stresses make a single cross-platform total misleading. You can discuss each platform’s results separately, but do not claim that an Android total is a measured percentage faster than an iPhone total simply because the number is larger.
Even when both apps display CPU, GPU, MEM and UX labels, matching labels do not make the underlying tests identical. Keep an Android table and an iOS/iPadOS table, and state that the separation follows AnTuTu’s own platform guidance.
What if the only scores available use different AnTuTu versions?
Choose one of three honest treatments:
- Find a matched result. Search for the same phone, platform and major version from another source. This is the best option for a head-to-head comparison.
- Separate the eras. Present V11 and V12 in different tables, describing each table’s results without ranking one table against the other.
- Use the older score as historical context. You may say that a result was recorded under an earlier benchmark release, but do not calculate an implied V12 value or a percentage gap.
A version mismatch is not repaired by averaging scores, subtracting a fixed number, or applying the increase AnTuTu observed in one historical transition. The test content and scoring design can change in multiple areas at once.
How should a chart show mixed versions?
If a mixed-version chart is editorially necessary, use visibly separate panels or colors, put the major version in every label, and place the warning in the chart itself rather than in a distant footnote. A line connecting V11 and V12 values can look like a time series or growth curve, so avoid connecting points across a version boundary. The safer presentation is one panel per major release, with a note that the vertical scales are not interchangeable.
How should I interpret total, CPU, GPU, MEM and UX scores?
AnTuTu divides its benchmark into CPU, GPU, memory and user-experience modules, which are combined into a total. A component difference can help identify where two same-version results diverge, but it does not turn the benchmark into a guaranteed prediction of everyday speed.
Also popular on Amazon
- [360 ° Flexible Rotation Design] Comes with a rotatable lanyard ring that supports 360 ° free rotation, effectively solving the problem of twisted and tangled lanyards
- [Wide compatibility] The ultra-thin 0.02-inch design does not block the charging port at all, and both wired and wireless charging can be used directly without removing the pad. Compatible with most smartphones such as iPhone, compatible with various wristbands, lanyards, crossbody straps, and keychains
- [Durable and Portable Material] Premium rust-resistant stainless steel material with good flexibility, which not only avoids scratching the phone case, but also has excellent anti rust and anti fading performance
- [Multi scenario Practical] Paired with a lanyard or wristband, hands-free use can be achieved. The phone is within reach and not easily dropped, ideal for daily commuting and outdoor activities. Suitable for full coverage phone cases, does not support half coverage phone cases
- [Quality Service] If you find any damage or other issues with the product upon receipt, please contact us immediately. We will handle it quickly
- CPU: reflects the workloads defined by that release’s processor tests.
- GPU: reflects the release’s graphics scenes and rendering pipeline.
- MEM: reflects the memory and storage work included in that release.
- UX: reflects the suite’s chosen system-rendering and response tasks.
Because each module can change between releases, comparing only one component across versions is not valid either. Compare components only after the version, platform and configuration have been aligned.
Within a matched group, a higher GPU component can support a statement that one phone scored higher on AnTuTu’s graphics workloads. It cannot by itself establish higher frame rates in every game. Likewise, a higher UX component is evidence about the suite’s selected response and rendering tasks, not a guarantee that every app opens faster.
The Tool Desk
Outbyte PC Repair FREEClear out junk files and repair common Windows errorsFree Scan →Outbyte Driver Updater FREEFix the driver behind crashes, sound loss and screen glitchesFind Drivers →How do operating-system and firmware updates affect a repeat test?
A repeat run after an operating-system or firmware update should be treated as a new observation. Keep the AnTuTu major version constant, but record the changed system build because drivers, power management and background software can alter the result. If the phone configuration or performance mode also changed, the comparison has more than one moving variable.
The cleanest before-and-after record names the same model and RAM/storage variant, uses the same major AnTuTu version and platform, and lists the two firmware builds and run dates. If temperature, battery or brightness differ, show those differences beside the values. This does not make the runs identical, but it tells readers what changed.
Independent reader supportYour contribution helps us test, update, and keep practical guides available for everyone.What are the most common comparison mistakes?
| Mistake | Why it fails | Correction |
|---|---|---|
| Dropping the “V12” or “V11” label | The number loses its scale and test-suite context. | Put the exact major version beside every result. |
| Ranking Android and iOS totals together | The implementations, APIs and methods differ. | Use separate platform groups. |
| Converting V11 into an estimated V12 score | No general conversion is supplied by AnTuTu. | Show the original score as historical context only. |
| Comparing different RAM or chipset variants as one model | Configuration can affect the result. | Identify the complete configuration. |
| Quoting a total without conditions | Thermal and power state may differ. | Record reported conditions and flag missing data. |
| Treating the total as a promise of daily performance | The score reflects a defined suite, not every app or task. | Describe what the modules measure and qualify the conclusion. |
| Joining points across a version change in a chart | The visual implies a continuous scale that AnTuTu says does not exist. | Use separate panels or clearly separated markers. |
| Hiding a beta label or capture date | Readers cannot tell which software context produced the number. | Preserve the beta or release status and date. |
Where can I verify the current AnTuTu app versions?
AnTuTu’s official download page listed Android Standard 12.0.3, updated October 23, 2026, and iOS/iPadOS 11.0.2, updated May 26, 2026, when checked on November 12, 2026. Listings can change, so cite the page and the date you observed it when documenting a comparison.
The download listing describes the benchmark as four modules and hundreds of tests. That description does not make Android and iOS scores interchangeable, nor does it remove the need to record the exact major version used for a published result.
Use the download page to verify what AnTuTu currently lists, but use the result screenshot or test report to identify what version actually produced a particular score. A current listing cannot retroactively establish the app version used in an older screenshot.
What does a careful conclusion sound like?
A strong conclusion states the boundary before the verdict: “Among the Android phones measured with AnTuTu V12 under the reported conditions, Model A has the higher total and GPU score. The V11 result shown separately is not directly comparable.” This wording tells readers exactly what the evidence supports.
Also popular on Amazon
- 【PKYAA Double Sided Silicone Suction Phone Case Mount】PKYAA With Double Sided 40 Strong and Reliable individual suction cups, PKYAA provides a thicken and upgraded universal silicon suction mount for your phone.
- 【Friendly to Content Creators】If you are a content creator or an online influencer, you can create videos anywhere with this suction mount completely hands free with this silicone cell phone mount for cases.
- 【HANDS-FREE & Adhere to Mirrors】This Double Sided silicone suction phone case mount allows you to stick your phone to the mirror easily. No longer holding your phone in one hand to watch video tutorials while making up.
- 【Strong Grip on the Smooth Surface】You can easily hang your phone anywhere with a smooth surface. All you do is you clean off your phone and smooth surface. It is STURDY and it not only sticks to mirrors, it also sticks to windows, it sticks to refrigerators, tiles and other clean, flat surfaces.
- 【Press Down Firmly Every 30 Minutes】Use your palm or fingers to press the phone down firmly and check it's secure before letting go. Apply even pressure for a few seconds to allow the suction cup to adhere properly. To maintain the grip and prevent accidental falls, it's a good practice to periodically reapply pressure to the suction cup.
A weak conclusion would say, “Model A is 20% faster,” when the figures came from different AnTuTu releases or platforms. The total gap could reflect changed workloads, APIs, firmware, thermal state or configuration rather than a guaranteed difference in use.
A practical confidence statement
When all key fields match, call the result a same-version, same-platform comparison. When one or more fields are missing, say “limited comparison” and name the missing fields. When the major version or platform differs, call it historical or cross-platform context only. This vocabulary keeps the headline, table and conclusion consistent.
Recommended Free Tools
What is the practical rule to remember?
Treat an AnTuTu score as a versioned measurement. Match the same major release and operating system, identify the precise phone configuration, capture component scores and dates, and report the conditions that are known. When those controls are impossible, preserve the mismatch instead of inventing a conversion.
Frequently Asked Questions
Can I convert an AnTuTu V11 score into an estimated V12 score?
No general conversion factor is provided by AnTuTu. Because V12 changes CPU, GPU, memory and UX workloads, a calculated equivalent would imply precision the benchmark publisher does not support.
Should I compare AnTuTu scores from the same phone after a system update?
Only if the AnTuTu major version and phone configuration remain the same, and you label the firmware difference. An operating-system update can still change power management or drivers, so treat the result as a new run rather than a perfectly controlled repeat.
Is a higher AnTuTu total always better for gaming?
Not necessarily. Gaming experience depends on the particular game, frame-rate targets, thermal sustain and software optimization; AnTuTu’s GPU module is evidence about its defined graphics workloads, not a guarantee for every title.
What’s actually slowing this PC down?
Pick the symptom - the matching free tool is one click away.
Why do two screenshots of the same phone show different AnTuTu totals?
They may use different app major versions, firmware, performance modes, temperatures or battery states. Check the version, platform, configuration and recorded conditions before attributing the difference to hardware.
Can I compare V12 public-beta results with later V12 results?
They share the same major-version label, but record the full build number, beta or release status and date. If the build or test conditions differ, describe the result as a limited comparison rather than assuming the runs are identical.
The Bottom Line
Bottom line: Compare AnTuTu totals and components only within the same major version and operating-system platform, with the phone configuration, date and known test conditions recorded. V12, V11 and older scores use different measurement contexts, so a mismatch should be labeled as history—not converted into a supposedly precise ranking.

