Some links on this page are affiliate links: if you buy through them we may earn a commission, at no extra cost to you.
Yes—China has manufactured advanced logic chips without ASML EUV machines. The workaround is immersion deep-ultraviolet (DUV) lithography combined with repeated patterning, etching and deposition steps. It can produce dense features that would otherwise be printed with extreme ultraviolet (EUV), but it is slower, more expensive and harder to yield at scale. Public evidence therefore supports a capability claim, not parity with the leading EUV-based 5 nm-class production of TSMC or Samsung.
The clearest recent evidence is a TechInsights teardown of Huawei’s Kirin 9030, which identified fabrication on SMIC’s N+3 process. TechInsights describes N+3 as a scaled evolution of SMIC’s 7 nm-class technology, while still being significantly less scaled than leading commercial 5 nm processes. Current output and yield remain uncertain because public figures come from attributed, sometimes conflicting industry estimates rather than audited disclosures.
As an Amazon Associate I earn from qualifying purchases.
Quick wins for a faster PC:
Fix the driver behind crashes, sound loss and screen glitchesFind Drivers →Repair Windows errors before they cause bigger problemsFix Now →How can China make advanced chips without EUV?
China can substitute process complexity for EUV’s shorter wavelength. A 193-nanometre immersion DUV scanner exposes one relatively simple mask pattern at a time. Engineers split a dense layout into several masks, expose the wafer repeatedly, and use etch, deposition and cleaning steps to combine those partial patterns into the intended structure. This is generally called multi-patterning.
EUV prints some of the same critical layers in fewer exposures because its 13.5-nanometre wavelength provides more patterning headroom. Without EUV, a manufacturer may use double, triple or more patterning with immersion DUV. Alignment between exposures has to be extremely precise; each extra cycle also adds queue time, contamination and defect opportunities.
Popular on Amazon
- 【90 Degree Full Function USB C Adapter】Supports the latest USB4 standard for up to 40Gbps of bandwidth, 8K video support, and up to 240W Fast charging; Support USB PD 3.1 Extended Power Range (EPR) including 140W, 180W and 240W. Your productivity is easily doubled. *Warm Tip: For the best fit, please make sure the USB-C port is fully exposed; thick or bulky cases may affect compatibility.
- 【Reliable Quality】Made from high-quality, scratch-resistant aluminum alloy, delicate metal frame. get excellent wear resistance and heat dissipation. Non-Slip Design for easier insertion and removal.
- 【Small and portable】Ultra thin size, ultra compact design, a petite physique that matches the minimalist design of your modern laptops. Coming with a slim figure that won't block the port next to the one it's plugged into.
- 【Compatibility】Widely work with most usb c, thunderbolt 4/3 devices. Compatibilit for ROG Ally, Steam Deck, Switch, MacBook Pro, Quest 3 VR headset, Surface Book 2, iPhone 18/17/16/15, Samsung Galaxy S23/S22/S21, Note 20/10, Google Pixel, ChromeBook, etc.
- 【Excellence Customer Support】If you experience any issues or cable failure, simply reach out to our dedicated customer service team. We provide a prompt response within 18 hours, providing you with the necessary technical support to resolve any concerns.
Tom’s Hardware quoted lithography expert Chris Mack, co-founder and CTO of Fractilia, summarizing one narrow cost comparison: At three, it was about even.
In context, three 193 nm immersion exposures were roughly comparable in cost to one EUV exposure. That is an expert explanation of a particular trade-off, not a universal quotation for the cost of an entire wafer process. Other layers, tool depreciation, labor, masks, yield loss and factory utilization can change the result.
Electron-beam tools can also write patterns directly, but their serial exposure makes them unsuitable for replacing high-volume scanner production on leading-edge logic. The Center for Strategic and International Studies’ review of Chinese lithography discusses why throughput, not merely the ability to draw a tiny feature, is decisive for commercial manufacturing.
Do these 3 things before closing this tab:
1Repair Windows errors before they cause bigger problems2Fix the driver behind crashes, sound loss and screen glitches3Clear out junk files and repair common Windows errorsWhat has actually been demonstrated?
The strongest public demonstration is structural rather than a complete production report. In a December 11, 2025 analysis, TechInsights reported that its teardown and dimensional analysis of Huawei’s Kirin 9030 confirmed SMIC N+3 fabrication. The company calls N+3 a scaled evolution of SMIC’s 7 nm-class technology and says it remains less scaled than leading commercial 5 nm processes from TSMC and Samsung.
That finding matters because it moves the discussion beyond whether a laboratory demonstration is physically possible. A smartphone-class system-on-chip requires a complete process flow, functioning design rules, packaging and a supply chain capable of delivering usable dies. At the same time, the open TechInsights article does not publish its complete comparative measurements; some data are available through its subscription platform. Readers should therefore use the conclusion—N+3 exists and is less scaled than leading 5 nm—as the supported comparison, rather than inventing a precise transistor-density equivalence.
Node names are not universal physical measurements. “7 nm,” “5 nm,” N+2 and N+3 describe a company’s process generation and marketing or internal naming conventions, not one globally standardized gate length or metal pitch. A sound comparison uses measured pitches, density, electrical characteristics, exposure count, yield and cost when those numbers are available.
Is China’s N+3 the same as a leading 5 nm process?
No. The available evidence points to a less-scaled process, even though both may be discussed with similar node language. TechInsights explicitly places SMIC N+3 behind leading commercial 5 nm offerings from TSMC and Samsung. That does not make N+3 unusable: a chip can meet its design targets through architectural choices, larger die area, lower clock speeds or aggressive power management. It does mean that a nominal label alone cannot establish parity.
Crashes, No Sound, or Screen Glitches?
Random freezes, missing sound and display glitches usually trace back to one bad driver. Find and replace yours safely.Free scan · under a minuteWindows Errors? Fix Them Before They Spread
Repair common Windows errors and clear accumulated junk for a smoother, more stable PC - no reinstall needed.Free scan · no reinstallAlso popular on Amazon
- 5-in-1 Connectivity: Equipped with a 4K HDMI port, a 5 Gbps USB-C data port, two 5 Gbps USB-A ports, and a USB C 100W PD-IN port. Note: The USB C 100W PD-IN port supports only charging and does not support data transfer devices such as headphones or speakers.
- Powerful Pass-Through Charging: Supports up to 85W pass-through charging so you can power up your laptop while you use the hub. Note: Pass-through charging requires a charger (not included). Note: To achieve full power for iPad, we recommend using a 45W wall charger.
- Transfer Files in Seconds: Move files to and from your laptop at speeds of up to 5 Gbps via the USB-C and USB-A data ports. Note: The USB C 5Gbps Data port does not support video output.
- HD Display: Connect to the HDMI port to stream or mirror content to an external monitor in resolutions of up to 4K@30Hz. Note: The USB-C ports do not support video output.
- What You Get: Anker 332 USB-C Hub (5-in-1), welcome guide, our worry-free 18-month warranty, and friendly customer service.
The relevant dimensions of competitiveness are:
- Pattern density: how closely transistors and interconnects can be placed, measured with physical metrics rather than a node name.
- Process complexity: how many masks, exposures, etch steps and other operations are required for critical layers.
- Yield: the percentage of wafers or dies meeting specifications. Multi-patterning increases the number of opportunities for a defect or overlay error.
- Throughput: wafers processed per hour and the time a wafer spends in the factory.
- Cost per good die: the cost after scrap and yield losses, not simply the purchase price of a scanner.
- Scale: the number of wafers started and good chips delivered consistently, rather than installed tools or a one-off run.
Because the public N+3 report does not disclose all measurements, it supports a directional comparison, not a complete benchmark against every 5 nm product.
Why does DUV multi-patterning make manufacturing harder?
Every additional patterning cycle compounds manufacturing penalties.
- More exposures and masks. A layer that might need one EUV exposure can require several DUV exposures, each with its own mask, alignment and inspection requirements.
- Longer cycle time. Wafers revisit lithography and related process tools more often, reducing the number of wafers a line can finish in a given period.
- More defect opportunities. A particle, resist problem or overlay error in any added step can spoil a die or force rework.
- Tighter process control. Overlay, critical dimensions and line-edge roughness must remain within the combined error budget of multiple exposures.
- Higher effective cost. Even if individual DUV scanners cost less than an EUV system, extra masks, tool time, chemicals, inspections and scrap raise the cost of usable dies.
These penalties explain the central distinction: DUV can be technically sufficient to print a pattern, while still being commercially inferior for high-volume, high-yield production. A design that works on a small run can become uneconomic when the factory must supply millions of identical chips.
How much 7 nm-class capacity does SMIC have?
Public numbers are estimates, not an audited production ledger. In testimony to the U.S. House Committee on Science, Space, and Technology on April 8, 2025, Gregory C. Allen said industry sources estimated that SMIC had enough ASML immersion-DUV equipment for about 85,000 FinFET wafers per month across its SN1 and SN2 sites. That is tool-supported capacity across process lines, not confirmed 7 nm output.
The same testimony characterized SN2 in Shanghai as China’s only active 7 nm logic line at that time and described SMIC and Huawei as working toward scaled 5 nm production without EUV. Those statements are dated to April 2025; they should not be treated as a verified map of every Chinese facility or its output in November 2026.
Allen’s testimony also attributed an estimate of 20,000 wafers per month and roughly 20% yield for SMIC 7 nm AI chips to industry sources. A Financial Times report dated February 24, 2025, citing two anonymous sources, put AI-chip yield near 40%; the CSIS discussion said its sources disputed that figure. Neither estimate is independently audited. The responsible conclusion is that yield and volume are contested and not publicly established.
Also popular on Amazon
- Sleek 7-in-1 USB-C Hub: Features an HDMI port, two USB-A 3.0 ports, and a USB-C data port, each providing 5Gbps transfer speeds. It also includes a USB-C PD input port for charging up to 100W and dual SD and TF card slots, all in a compact design.
- Flawless 4K@60Hz Video with HDMI: Delivers exceptional clarity and smoothness with its 4K@60Hz HDMI port, making it ideal for high-definition presentations and entertainment. (Note: Only the HDMI port supports video projection; the USB-C port is for data transfer only.)
- Double Up on Efficiency: The two USB-A 3.0 ports and a USB-C port support a fast 5Gbps data rate, significantly boosting your transfer speeds and improving productivity.
- Fast and Reliable 85W Charging: Offers high-capacity, speedy charging for laptops up to 85W, so you spend less time tethered to an outlet and more time being productive.
- What You Get: Anker USB-C Hub (7-in-1), welcome guide, 18-month warranty, and our friendly customer service.
Keep three quantities separate:
- Installed or tool-supported capacity: what the equipment could process under stated assumptions.
- Wafer starts: wafers put into a process line, many of which will not become saleable products.
- Good dies delivered: finished chips that pass electrical and reliability specifications.
Confusing these figures can make a constrained line appear much larger than it is.
What bottlenecks remain besides lithography?
A fab is a chain of interdependent tools. The House testimony identifies etch, deposition, inspection and metrology as constraints on expanding 7 nm production and improving yields, in addition to lithography. Etch defines structures after exposure; deposition builds films and spacers; inspection finds defects; metrology measures dimensions and alignment. A shortage or performance gap in any one category can limit the entire line.
What’s actually slowing this PC down?
Pick the symptom - the matching free tool is one click away.
More volume can also improve the process. Running additional wafers gives engineers more data on defects, uniformity and tool drift, allowing recipes and maintenance intervals to be refined. That learning effect is one reason a technically proven process may still lag a mature high-volume process: the manufacturer has fewer opportunities to accumulate statistically useful production experience.
Packaging is another practical boundary. Advanced logic may require sophisticated interconnect, thermal management and testing. A wafer line that can fabricate a small number of functioning dies does not automatically provide enough packaging capacity or consistent final-product quality for a mass-market device.
What do export controls have to do with the workaround?
Export controls help explain why Chinese manufacturers are optimizing DUV rather than simply buying the newest EUV tools. In its June 30, 2023 statement, ASML said, As a reminder, sales of ASML’s EUV systems have already been restricted.
The statement also said the Netherlands would require export licenses for ASML’s most advanced immersion-DUV systems, including TWINSCAN NXT:2000i and later systems, under regulations taking effect September 1, 2023, with applications decided case by case.
That is a dated description of ASML’s position and the Dutch announcement, not a complete account of all U.S., Dutch, Japanese or later controls. Rules can change, and licensing decisions are fact-specific. The practical effect described in the evidence is that access to both EUV and the newest DUV equipment is a strategic constraint, increasing the value of older installed tools, domestic substitutes and process techniques that extract more capability from available scanners.
Also popular on Amazon
- Portable and powerful USB-C HUB: BENFEI USB Type-C HUB, with super-soft and knot-free silicone woven design cable, meets most mobile office needs. Compact, lightweight, stylish, and powerful portable USB C Hub equipped with 1 x HDMI port, 1 x 100W charging, and 3 x USB ports. 18-month warranty, 24-hour response, to ensure you feel at ease when using our product.
- Design centered on comfort and reliability: Thanks to BENFEI's end-to-end in-house cable production capability, in-house PCBA and assembly capability, using the industry's most advanced silicone woven design and process, 20cm cable in length, no knots, super-soft, the HUB is easy to use in all scenarios: laptop, tablet, stand etc. Super-soft, 25000+ life cycles, to meet your daily carrying and office needs.
- 100W Charging: Support up to 90W USB C pass-through charging via Type-C port to keep your laptop powered. 10W is reserved for other interface operations. No data and video function on the Type-C port.
- 4K HDMI Display: The HDMI port supports media display at resolutions up to 4K 30Hz, keeping every incredible moment detailed and ultra vivid. Please note that the C port of the Host device needs to support video output.
- Transfer Files in Seconds: Transfer files and from your laptop at speeds up to 10 Gbps with USB A 3.2 port. Extra 2 USB A 2.0 ports are perfectly for your keyboards and mouse.
How does China’s position fit the global chip market?
The Federal Reserve Board’s January 17, 2025 analysis, using SEMI World Fab Forecast data through 2023 Q3, illustrates why node categories matter. Its chart presents global production shares by node group: legacy nodes at 28 nm and above accounted for 69%, advanced nodes at 6–27 nm for 37%, and cutting-edge nodes at 5 nm and below for 4% (the categories are presented as production shares by country of production in the chart and are not China’s share within each group).
The note says China’s capacity was concentrated in legacy chips even as its broader wafer capacity grew substantially. It also describes ASML’s 100% share of the most advanced EUV lithography machines and the strategic leverage created by geographic concentration in the semiconductor supply chain. These figures describe 2023 conditions and should not be read as measurements of China’s or the world’s 2026 output.
For China, the strategic objective is therefore broader than matching one leading smartphone node. Mature-node capacity supplies power-management chips, microcontrollers, display drivers and automotive components, while advanced logic supports high-performance computing and AI. Progress at 7 nm-class and N+3 processes can have strategic value even if the economics trail EUV-equipped competitors.
Independent reader supportYour contribution helps us test, update, and keep practical guides available for everyone.Can DUV replace EUV for every advanced chip?
No. DUV multi-patterning is a viable alternative for some layers and products, but it is not a drop-in replacement with identical economics. The answer depends on the design’s density, die size, performance target, allowable cost, available masks and factory capacity.
Recommended Free Tools
A company may accept a larger die or lower yield when the product is strategically important and supply is constrained. For a commodity chip sold into a price-sensitive market, the same penalties can make the approach unattractive. EUV’s advantage grows as more critical layers need dense patterning and as customers demand high volume at predictable cost.
This is why “China made a 7 nm chip without EUV” and “China can compete with every EUV-based 5 nm foundry” are different statements. The first is supported by the Kirin 9030/N+3 evidence. The second requires public, comparable data on density, power, performance, yield, cost and sustained output that are not available in the cited sources.
Also popular on Amazon
- 【Read before You Buy】 Note: This adapter is USB 2.0 version and cannot transmit HDM, VGA, or other video signals. Nevertheless, they are fully capable of charging devices,duplicating files, and can be seamlessly integrated with USB-C earphones, wireless network adapters, and SD card adapters.
- 【Easy to Use and Safe】Thanks to modern manufacturing techniques, we've made these adapters sufficiently compact so that they can remain inserted in your device without noticeable protrusion or inconvenience. This means you don't have to constantly plug and unplug them, reducing the likelihood of wear and misalignment, and making them more convenient to carry around.
- 【Reliable Quality】Engineered for enhanced durability, durable aluminum alloy shell material,get excellent wear resistance and heat dissipation,the male USB C and female USB connectors & the male USB and female USB C connectors are designed to be plugged and unplugged up to 20000 times. Provides data transfer, device charging, memory space expansion, and additional computer peripherals.
- 【Think more for you】Do you need to connect a USB-C-enabled device to an odd device that only has USB-A ports? Then these USB-A male to USB-C female adapters are made for you.Simply insert the adapter into the USB-A port on the device, and you can instantly connect your USB-C device to the device that originally didn't have the correct connection port.
- 【Trusted xiwxi Quality and Service】As a responsible brand seller, you will receive xiwxi's 12-month Quality assurance and lifetime friendly customer service, you're not just buying a product,you're investing in peace of mind with all-round quality and exceptional customer service.
What should readers conclude about China’s chipmaking capability?
China has demonstrated that advanced logic manufacturing does not have an absolute EUV prerequisite. Immersion DUV, multi-patterning and intensive process engineering can produce working 7 nm-class and more advanced generations. The Kirin 9030 teardown indicates that SMIC’s N+3 is a real, scaled process evolution.
The same evidence shows the limits. N+3 remains less scaled than leading commercial 5 nm processes; extra patterning raises time, cost and defect risk; and public capacity and yield figures are incomplete and disputed. Etch, deposition, inspection, metrology, packaging and accumulated process learning all matter. The most accurate verdict is therefore capability without demonstrated leading-edge parity: China can make these chips, but EUV-equipped foundries retain advantages in scaling, economics, yield and volume based on the evidence currently public.
Frequently Asked Questions
How is China making 7 nm chips without EUV?
Chinese foundries use 193 nm immersion DUV scanners with multi-patterning. They split dense layers into several masks and repeat exposure, etch and deposition steps, trading fewer expensive scanners for more process steps and tighter overlay control.
Does a 7 nm label prove a chip matches TSMC’s 7 nm?
No. Node labels are process-generation names, not standardized physical dimensions. Comparisons should use measured density, pitches, electrical performance, yield and cost; the available TechInsights evidence places SMIC N+3 below leading commercial 5 nm scaling.
What is the difference between wafer capacity and chip output?
Capacity describes how many wafers tools could process under assumptions. Wafer starts count wafers entering the line, while output means good dies that pass testing; yield losses and packaging constraints can make delivered chips far lower than installed capacity suggests.
Are reported SMIC yield figures reliable?
Public estimates are contested. The 2025 House testimony cited industry-source estimates near 20% for certain 7 nm AI chips, while a contemporaneous report cited about 40%; the testimony said that figure was disputed, and neither estimate is an audited current result.
Free tools Windows power users keep installed
One-click scans. No signup required.
Will export controls stop China from making advanced chips?
They restrict access to some of the most capable lithography equipment, increasing cost and slowing scale, but they do not make manufacturing physically impossible. Existing DUV tools, domestic equipment development and process learning can still support limited advanced production.

