Driver FixRecommendedSound, Wi-Fi or graphics acting up? Check drivers firstFind missing or outdated drivers fast.Check DriversThanksgiving DealsAmazon USThanksgiving week: Black Friday picks start earlyAmazon US: current deals, useful picks and tech finds.Check DealsPC HealthRecommendedCrashes, freezes, slowdowns? Check your PC nowSpot repairable issues before they interrupt work.Check PC×
FREEDOM251

Freedom251 › Blog

Buying Thermal Energy Storage for a Data Center: A Practical Buyer’s Guide

By Freedom251 Team · · 11 min read

Special offer. See more information about Outbyte and uninstall instructions. Please review EULA and Privacy policy.

Some links on this page are affiliate links: if you buy through them we may earn a commission, at no extra cost to you.

When buying a thermal energy storage (TES) system for a data center, start with the hourly cooling load and the outcome you need—not with a tank size or a preferred technology. A sound proposal shows how storage will reduce peak demand or energy cost, support resilience, or defer chiller capacity under your site’s actual weather, tariff, water, and operating constraints. It also proves that the plant can charge storage while continuously cooling the data center, and it includes metering for verification.

Use the framework below to turn vendor proposals into an apples-to-apples decision. The right system may be chilled-water storage, ice storage, or a site-specific underground system; in some climates, the best answer may be a smaller TES installation or none at all.

As an Amazon Associate I earn from qualifying purchases.

Special offer. See more information about Outbyte and uninstall instructions. Please review EULA and Privacy policy.

What is thermal energy storage in a data center?

Thermal energy storage makes cooling at one time available at another. A chilled-water tank, ice-storage plant, or underground thermal store is charged when cooling production is inexpensive or capacity is available, then discharged to serve chilled-water demand later. In a data center, that can shift electrical consumption away from expensive or congested periods, reduce the required chiller capacity, or provide cooling while chillers restart.

The business case is not automatically an energy-saving case. The U.S. Department of Energy (DOE) notes that annual chilled-water-plant energy can increase after TES is installed even when energy costs fall because load has moved away from high-priced periods. Evaluate annual energy, peak electrical demand, demand charges, total utility cost, water use, and resilience as separate results.

Popular on Amazon
Sale
Silkland 40Gbps USB C 90 Degree Right Angle Adapter 2 Pack, 240W USB4 | Male to Female Extender, 8K@60Hz, Thunderbolt 4/3, Steam Deck, ROG Ally, MacBook, Switch 2, iPhone 18/17/16/15, Quest 3 VR
  • 【90 Degree Full Function USB C Adapter】Supports the latest USB4 standard for up to 40Gbps of bandwidth, 8K video support, and up to 240W Fast charging; Support USB PD 3.1 Extended Power Range (EPR) including 140W, 180W and 240W. Your productivity is easily doubled. *Warm Tip: For the best fit, please make sure the USB-C port is fully exposed; thick or bulky cases may affect compatibility.
  • 【Reliable Quality】Made from high-quality, scratch-resistant aluminum alloy, delicate metal frame. get excellent wear resistance and heat dissipation. Non-Slip Design for easier insertion and removal.
  • 【Small and portable】Ultra thin size, ultra compact design, a petite physique that matches the minimalist design of your modern laptops. Coming with a slim figure that won't block the port next to the one it's plugged into.
  • 【Compatibility】Widely work with most usb c, thunderbolt 4/3 devices. Compatibilit for ROG Ally, Steam Deck, Switch, MacBook Pro, Quest 3 VR headset, Surface Book 2, iPhone 18/17/16/15, Samsung Galaxy S23/S22/S21, Note 20/10, Google Pixel, ChromeBook, etc.
  • 【Excellence Customer Support】If you experience any issues or cable failure, simply reach out to our dedicated customer service team. We provide a prompt response within 18 hours, providing you with the necessary technical support to resolve any concerns.

TES is engineered infrastructure, not a generic equipment purchase. Tanks can be very large—DOE says tanks of one million gallons and more are not unusual in data centers—but that figure is a scale indicator, not a recommendation for your facility. Your usable storage capacity, discharge rate, and duration must come from your load profile and operating objective.

Which outcome should the system deliver?

Write the primary objective into the request for proposal (RFP) before asking suppliers to size equipment. A design optimized for demand-charge reduction can differ substantially from one intended to defer chillers or provide outage cooling.

Special offer. See more information about Outbyte and uninstall instructions. Please review EULA and Privacy policy.
  • Peak-demand reduction: Discharge during the utility’s peak-demand window to reduce the facility’s highest electrical draw.
  • Time-of-use cost shifting: Charge during lower-cost hours and serve cooling when electricity prices are higher.
  • Avoided or deferred mechanical capacity: Use storage to meet a design-day peak without installing all of the additional chiller capacity immediately.
  • Cooling resilience: Provide a defined amount of cooling during a chiller trip, maintenance event, or restart sequence.
  • Combined objective: State how much priority each benefit receives; a system sized for a short outage may not provide the same economic optimum as one sized for a full peak period.

Ask each bidder to report the result for every objective separately. “Savings” without a stated baseline, tariff, weather year, and operating schedule is not a usable purchasing metric.

How do I size thermal storage for a data center?

Size TES from the hourly load profile and the portion of the design load that storage must meet. ASHRAE’s Chapter 50 guidance on thermal storage starts by determining the storage contribution, then calculating the design load profile and the required chiller and storage capacities.

  1. Collect representative load data. Use interval electrical and cooling data, server and ancillary-load forecasts, chilled-water supply and return temperatures, flow, weather, and planned expansion. Separate current operation from future phases.
  2. Define the design day and target window. Identify the hours to be covered, the outdoor conditions, the data-center load, and any utility peak or congestion period.
  3. Choose full or partial storage. Full storage uses TES to cover the entire design-day on-peak cooling load while chillers charge the store off-peak. Partial storage covers only a portion of the peak while chillers continue serving the remainder. Partial systems usually trade some storage capacity for continued chiller operation; the financial and resilience consequences must be modeled.
  4. Model charging and discharge together. Convert the required cooling ton-hours into usable storage capacity after accounting for temperature limits, stratification or ice-melt behavior, heat exchanger losses, pump energy, and minimum operating levels.
  5. Check simultaneous operation. Data centers generally run continuously. DOE states that the chilled-water plant must be sized to charge TES while simultaneously meeting the live cooling demand. A proposal that sizes chillers only for charging, or only for the peak load, is incomplete.
  6. Test future phases and abnormal conditions. Model staged data-center growth, partial occupancy, hot weather, equipment derating, maintenance, and a failed chiller or pump. Confirm that controls do not strand usable storage.

Require the vendor to provide the hourly load profile, design-day assumptions, target peak window, storage contribution, storage capacity, chiller capacity, charge schedule, discharge schedule, and the simultaneous live-load calculation. Make every bidder use the same assumptions so that a larger tank is not mistaken for a better design.

Which storage technology fits the site?

Chilled-water storage, ice storage, and cold underground thermal storage can all be technically viable, but they have different temperature, footprint, control, water, and permitting requirements. The site—not a generic technology ranking—should determine the shortlist.

What’s actually slowing this PC down?

Pick the symptom - the matching free tool is one click away.

Special offer. See more information about Outbyte and uninstall instructions. Please review EULA and Privacy policy.
Also popular on Amazon
Sale
Anker USB C Hub, 5-in-1 USBC to HDMI Splitter with 4K Display | 85W Max PD, 1 Powered USB-C 5Gbps & 2 Powered USB-A 3.0 5Gbps Data Ports, for MacBook Pro, MacBook Air, Dell and More (Black)
  • 5-in-1 Connectivity: Equipped with a 4K HDMI port, a 5 Gbps USB-C data port, two 5 Gbps USB-A ports, and a USB C 100W PD-IN port. Note: The USB C 100W PD-IN port supports only charging and does not support data transfer devices such as headphones or speakers.
  • Powerful Pass-Through Charging: Supports up to 85W pass-through charging so you can power up your laptop while you use the hub. Note: Pass-through charging requires a charger (not included). Note: To achieve full power for iPad, we recommend using a 45W wall charger.
  • Transfer Files in Seconds: Move files to and from your laptop at speeds of up to 5 Gbps via the USB-C and USB-A data ports. Note: The USB C 5Gbps Data port does not support video output.
  • HD Display: Connect to the HDMI port to stream or mirror content to an external monitor in resolutions of up to 4K@30Hz. Note: The USB-C ports do not support video output.
  • What You Get: Anker 332 USB-C Hub (5-in-1), welcome guide, our worry-free 18-month warranty, and friendly customer service.

Chilled-water storage

A stratified tank stores sensible cooling in water and usually integrates with a conventional chilled-water loop. Review tank volume, usable temperature difference, diffuser design, mixing risk, insulation, structural loads, site work, and the pump power required during charge and discharge. Large tanks may require significant land, foundation work, fire and seismic review, and maintenance access.

Ice storage

Ice systems store latent cooling at a lower temperature and can reduce storage volume for a given amount of cooling. They may require low-temperature charging equipment, specialized heat exchangers, glycol or other fluid arrangements, and controls that protect data-center supply-temperature limits. Ask for the impact on chiller efficiency, pumping, freeze protection, and maintenance.

Cold underground thermal storage

Underground systems use site geology and engineered wells or other subsurface structures to store cooling. A DOE Office of Geothermal project modeled a 1-gigawatt data center in Virginia and another in Arizona and reported potential for cost-effective industrial-scale cooling in those cases. Those are modeled project scenarios, not evidence that underground storage is suitable or economical at every site. Require a site investigation, thermal-response testing, permitting pathway, groundwater assessment, and a long-term performance model before treating it as a bankable option.

For any technology, ask how the system interacts with cooling towers, dry coolers, waterside economizers, air-side economizers, and existing chillers. DOE warns that TES can reduce opportunities for air-side economizing in cool, dry climates, potentially offsetting some energy or water benefits.

Special offer. See more information about Outbyte and uninstall instructions. Please review EULA and Privacy policy.

Will TES reduce energy use or only peak costs?

It can do either, neither, or both, depending on the plant and tariff. Storage shifts when cooling is produced; it does not remove the underlying heat load.

In cool, dry nighttime conditions, a cooling tower may charge a chilled-water tank with less energy than mechanical chillers would use. In other operating conditions, extra heat transfer, pumping, charging losses, or less economizer operation can increase annual energy. DOE’s cooling-water guidance also cautions that water and energy savings may be limited because TES still relies on mechanical cooling and, where applicable, evaporative processes.

Also popular on Amazon
Sale
Anker USB C Hub, 7in1 Multi-Port USB Adapter, 4K@60Hz USBC to HDMI Splitter | 85W Max PD, 2 USB 3.0 & 1 USBC Data Ports, SD/TF Card Reader, for Laptops/Mac and Other Type C Devices (Charger Not Included)
  • Sleek 7-in-1 USB-C Hub: Features an HDMI port, two USB-A 3.0 ports, and a USB-C data port, each providing 5Gbps transfer speeds. It also includes a USB-C PD input port for charging up to 100W and dual SD and TF card slots, all in a compact design.
  • Flawless 4K@60Hz Video with HDMI: Delivers exceptional clarity and smoothness with its 4K@60Hz HDMI port, making it ideal for high-definition presentations and entertainment. (Note: Only the HDMI port supports video projection; the USB-C port is for data transfer only.)
  • Double Up on Efficiency: The two USB-A 3.0 ports and a USB-C port support a fast 5Gbps data rate, significantly boosting your transfer speeds and improving productivity.
  • Fast and Reliable 85W Charging: Offers high-capacity, speedy charging for laptops up to 85W, so you spend less time tethered to an outlet and more time being productive.
  • What You Get: Anker USB-C Hub (7-in-1), welcome guide, 18-month warranty, and our friendly customer service.

Require a financial model that reports, for the same baseline:

  • Annual chiller, tower, pump, and TES energy use.
  • Maximum coincident electrical demand and the hours that create it.
  • Energy charges, demand charges, and any time-of-use or grid-program revenue.
  • Water withdrawal, consumption, blowdown, and treatment requirements.
  • Deferred chiller or electrical-infrastructure capital, if claimed.
  • Installed cost, replacement assumptions, maintenance, controls, and lifecycle cost.

Have the vendor state the tariff version, rate jurisdiction, weather data, escalation assumptions, operating hours, and baseline equipment efficiency. Ask for sensitivity cases when tariffs, weather, or load growth change.

Special offer. See more information about Outbyte and uninstall instructions. Please review EULA and Privacy policy.

How does climate and water availability change the decision?

Climate determines when free cooling, tower-assisted cooling, or mechanical chilling is available. Water rules and community sensitivity can be equally important. ASHRAE’s grid-interactive guidance says buyers should account for water scarcity, local regulations, and the site-level trade-off between water-based and dry cooling.

Compare at least these operating cases:

  • Hot design-day operation with no economizer benefit.
  • Cool, dry nighttime charging.
  • Humid weather that limits tower performance.
  • Water restrictions, reduced tower cycles of concentration, or a dry-cooling fallback.
  • Partial-load operation during low data-center utilization.

Do not count a theoretical economizer benefit if the storage controls or temperature requirements prevent the plant from using it. Conversely, do not claim water savings unless the model includes tower operation, blowdown, treatment, and any added water use from the TES plant.

What resilience should a thermal storage system provide?

Specify resilience as a performance case: cooling capacity, discharge duration, starting state of charge, ambient condition, failed equipment, and the loads that remain online. “Backup cooling” is too vague to compare proposals.

ASHRAE’s 2024 Handbook notes that a chiller serving a mission-critical area may take at least 20 minutes to restart after an unexpected outage. That is contextual guidance, not a universal restart time. Your sequence may require longer coverage if switchgear, controls, water systems, or staffing delay recovery.

Special offer. See more information about Outbyte and uninstall instructions. Please review EULA and Privacy policy.
Also popular on Amazon
Sale
BENFEI USB C Hub 5-in-1 with 4K HDMI(Certified), 100W Power Delivery, 3 USB-A, Silicone Cable, Aluminum Case Compatible with MacBook Pro/Air, iPad Pro, iMac, iPhone 15 Pro/Pro Max, XPS, Thinkpad
  • Portable and powerful USB-C HUB: BENFEI USB Type-C HUB, with super-soft and knot-free silicone woven design cable, meets most mobile office needs. Compact, lightweight, stylish, and powerful portable USB C Hub equipped with 1 x HDMI port, 1 x 100W charging, and 3 x USB ports. 18-month warranty, 24-hour response, to ensure you feel at ease when using our product.
  • Design centered on comfort and reliability: Thanks to BENFEI's end-to-end in-house cable production capability, in-house PCBA and assembly capability, using the industry's most advanced silicone woven design and process, 20cm cable in length, no knots, super-soft, the HUB is easy to use in all scenarios: laptop, tablet, stand etc. Super-soft, 25000+ life cycles, to meet your daily carrying and office needs.
  • 100W Charging: Support up to 90W USB C pass-through charging via Type-C port to keep your laptop powered. 10W is reserved for other interface operations. No data and video function on the Type-C port.
  • 4K HDMI Display: The HDMI port supports media display at resolutions up to 4K 30Hz, keeping every incredible moment detailed and ultra vivid. Please note that the C port of the Host device needs to support video output.
  • Transfer Files in Seconds: Transfer files and from your laptop at speeds up to 10 Gbps with USB A 3.2 port. Extra 2 USB A 2.0 ports are perfectly for your keyboards and mouse.

Ask bidders to document:

  • Net cooling capacity delivered at the data-center supply temperature.
  • Discharge duration for the specified outage and state of charge.
  • Pump and control power during discharge, including emergency power requirements.
  • Automatic detection, switchover, valve positions, and return-to-normal sequence.
  • Redundancy of pumps, heat exchangers, controls, sensors, and power feeds.
  • Interaction with the facility’s N, N+1, 2N, or other redundancy strategy.
  • Testing and commissioning steps that demonstrate the stated sequence without risking the IT load.

Storage can bridge a restart or maintenance event, but it is not automatically equivalent to generator-backed cooling. Confirm what happens if the tank is partly discharged, a pump fails, or a control network is unavailable.

What site and plant details must be checked?

Before accepting a concept design, verify physical and operational fit with the existing or planned cooling plant.

Check What to request Why it matters
Hydraulics Supply and return temperatures, design and minimum flows, pressure drop, heat-exchanger approach, pump curves Incorrect assumptions can reduce usable capacity or increase pump energy.
Chillers and towers Staging sequence, minimum loads, charging capacity, tower limits, bypasses, and failure modes TES must not force unstable chiller operation or defeat redundancy.
Economizers Air-side and waterside economizer hours before and after TES Storage may displace low-energy cooling in favorable weather.
Space and structure Footprint, tank height, foundations, seismic loads, access, drainage, and fire review Large storage volumes can become a civil-works project.
Water and permitting Make-up, blowdown, treatment, discharge, groundwater, and local approvals Water constraints can change both cost and operating availability.
Controls Sequences, setpoints, communications, alarms, overrides, cybersecurity boundaries, and manual modes TES value depends on reliable automated dispatch.

What should the vendor RFP require?

Give every proposer the same data and require the same deliverables. A useful RFP asks for:

  1. The hourly load profile, design day, weather file, tariff, expansion forecast, and operating objective used for sizing.
  2. A full-storage and partial-storage alternative using identical assumptions.
  3. Storage volume, usable cooling capacity, charge and discharge rates, temperatures, flows, pump power, and parasitic loads.
  4. Annual energy, peak demand, bill, water, capacity-deferral, and lifecycle-cost results as separate outputs.
  5. Effects on chillers, towers, economizers, existing controls, and emergency power.
  6. Space, structural, site-work, permitting, maintenance, spare-parts, and commissioning requirements.
  7. A resilience case with outage assumptions, duration, capacity, switchover sequence, and redundancy interfaces.
  8. Performance guarantees, degradation assumptions, warranty boundaries, and remedies if capacity is unavailable.
  9. A measurement-and-verification plan, including meters, data intervals, baseline period, weather normalization, and acceptance criteria.

Require an assumptions register with revision control. Any omitted assumption—such as a minimum chiller load, tank usable fraction, or pump operating point—can materially change the result.

Special offer. See more information about Outbyte and uninstall instructions. Please review EULA and Privacy policy.
Independent reader supportYour contribution helps us test, update, and keep practical guides available for everyone.Support on Ko-Fi

How should measurement and verification be designed?

Make M&V part of procurement, not an afterthought. DOE’s 2025 Data Center Addendum illustrates the variables needed before installation and during charge and discharge cycles.

At minimum, meter and trend:

  • Chiller, cooling-tower, TES-pump, and associated plant electrical demand.
  • Chilled-water supply and return temperatures at the plant and data-center interfaces.
  • Flow through the storage loop and the load loop.
  • Tank temperature profile or ice state of charge.
  • Charge, discharge, standby, economizer, and bypass states.
  • Outdoor conditions, data-center cooling load, and utility interval demand.
  • Water make-up and blowdown where water impact is part of the business case.

Define a baseline that captures comparable weather and IT load, then state how savings or demand reduction will be normalized. Acceptance testing should demonstrate charge and discharge at the specified temperatures and flow, automatic transitions, alarms, and operation with each declared redundant component unavailable.

Also popular on Amazon
𝟒𝐏𝐚𝐜𝐤 𝐔𝐩𝐠𝐫𝐚𝐝𝐞𝐝 USB to USB C Adapter,Type-C Female to A Male Charger Converter for iPhone 18 Charger,iWatch Ultra SE 9 10,iPhone 17 Pro Max 16 15 14,Samsung S25,AirPods,iPad,Car,Xbox
  • 【Read before You Buy】 Note: This adapter is USB 2.0 version and cannot transmit HDM, VGA, or other video signals. Nevertheless, they are fully capable of charging devices,duplicating files, and can be seamlessly integrated with USB-C earphones, wireless network adapters, and SD card adapters.
  • 【Easy to Use and Safe】Thanks to modern manufacturing techniques, we've made these adapters sufficiently compact so that they can remain inserted in your device without noticeable protrusion or inconvenience. This means you don't have to constantly plug and unplug them, reducing the likelihood of wear and misalignment, and making them more convenient to carry around.
  • 【Reliable Quality】Engineered for enhanced durability, durable aluminum alloy shell material,get excellent wear resistance and heat dissipation,the male USB C and female USB connectors & the male USB and female USB C connectors are designed to be plugged and unplugged up to 20000 times. Provides data transfer, device charging, memory space expansion, and additional computer peripherals.
  • 【Think more for you】Do you need to connect a USB-C-enabled device to an odd device that only has USB-A ports? Then these USB-A male to USB-C female adapters are made for you.Simply insert the adapter into the USB-A port on the device, and you can instantly connect your USB-C device to the device that originally didn't have the correct connection port.
  • 【Trusted xiwxi Quality and Service】As a responsible brand seller, you will receive xiwxi's 12-month Quality assurance and lifetime friendly customer service, you're not just buying a product,you're investing in peace of mind with all-round quality and exceptional customer service.

What are common buying mistakes?

  • Choosing capacity before defining the objective: A large tank may not reduce the utility peak if its discharge window is wrong.
  • Ignoring continuous operation: The plant must cool the live data-center load while charging storage.
  • Calling cost reduction energy reduction: Demand-charge savings and annual kilowatt-hour savings are different outcomes.
  • Using a generic climate model: Local humidity, economizer hours, water rules, and tariff structure can reverse the ranking of options.
  • Counting nameplate capacity as usable capacity: Account for temperature limits, mixing, losses, minimum state of charge, and pump constraints.
  • Leaving controls until the end: A storage tank without reliable dispatch logic can miss the peak or discharge at the wrong time.
  • Accepting an unverified resilience claim: Require a timed sequence, net capacity, duration, and failure case.
  • Skipping M&V: Without plant and storage metering, it is difficult to prove whether the project delivered its promised benefit.

What is a practical decision sequence?

  1. Document the objective and constraints. Record peak window, resilience requirement, expansion plan, water limits, space, and redundancy philosophy.
  2. Build the baseline. Assemble interval load, plant efficiency, weather, tariff, water, and economizer data.
  3. Issue a common design basis. Give vendors identical assumptions and require full- and partial-storage cases.
  4. Screen site fit. Eliminate concepts that cannot meet temperatures, flows, structural, permitting, or water requirements.
  5. Compare economics and resilience separately. Do not let a favorable bill result hide weak outage performance, or vice versa.
  6. Negotiate guarantees and M&V. Tie payment and acceptance to measured capacity, control sequences, and documented operating conditions.
  7. Commission in stages. Verify sensors and meters, then charge, discharge, transitions, alarms, and failure modes before relying on TES for critical operations.

The best purchase is the proposal that meets the stated operating objective with transparent assumptions, verifiable performance, and acceptable lifecycle risk. In some facilities that will be a large chilled-water tank; in others, ice or underground storage; and in some cool, water-constrained sites, preserving economizer operation and avoiding TES may be the more defensible decision.

Frequently Asked Questions

Can thermal storage replace redundant chillers in a data center?

Usually it should be treated as one element of the cooling-resilience plan, not an automatic substitute for redundant chillers. Whether it can defer a chiller depends on the required outage case, discharge duration, pump and control redundancy, and the facility’s approved reliability topology.

Free tools Windows power users keep installed

One-click scans. No signup required.

Special offer. See more information about Outbyte and uninstall instructions. Please review EULA and Privacy policy.

How often should a data-center TES system be tested after commissioning?

The testing interval should follow the owner’s reliability program, manufacturer requirements, and operating risk. The procedure should exercise charge, discharge, automatic transition, alarms, and degraded states while recording temperatures, flow, power, and delivered capacity.

Does a thermal storage tank require emergency power?

The tank itself may not, but pumps, valves, controls, sensors, and heat-rejection equipment may need power during a resilience event. The electrical study should identify every component required to deliver the specified net cooling and show its connection to the emergency-power scheme.

What information should an owner provide before requesting TES bids?

Provide interval cooling and electrical data, chilled-water temperatures and flows, weather and tariff information, economizer operation, expansion forecasts, available space, water constraints, and the required outage scenario. A common, documented design basis makes competing proposals comparable.

Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon at the time of purchase will apply. Prices as of November 22, 2026 5:05 pm GMT+0530.

Leave a Reply

Your email address will not be published. Required fields are marked *

Special offer. See more information about Outbyte and uninstall instructions. Please review EULA and Privacy policy.

Recommended PC Tool
Recommended PC Tool
Outdated Drivers Are Slowing You DownFree scan - exact matches
PC Slower Than It Used to Be?Free scan - under a minute

Two free Windows tools

One Free Minute Could Fix That PC

Before you go - each of these free tools takes about a minute and tackles what quietly slows a Windows PC down.

Special offer. View Outbyte info, uninstall instructions, EULA, and Privacy Policy.