Black Friday PreviewAmazon USBlack Friday preview: compare before the rush hitsAmazon US: current deals, useful picks and tech finds.Check DealsWindows FixRecommendedWindows errors stealing your time? Find the fix fastScan stability, cleanup and performance issues.Fix NowBlack Friday PreviewAmazon USThe best pick may show up before FridayAmazon US: current deals, useful picks and tech finds.See Picks×
FREEDOM251

Freedom251 › Blog

Bluetooth Speaker Loudness: Why Watts Matter Less Than Decibels and SPL

By Freedom251 Team · · 12 min read

Special offer. See more information about Outbyte and uninstall instructions. Please review EULA and Privacy policy.

Some links on this page are affiliate links: if you buy through them we may earn a commission, at no extra cost to you.

Bluetooth speaker loudness is determined by acoustic output, not the watt number printed on the box. Watts describe electrical power; decibels describe sound pressure; and sensitivity plus maximum SPL show how efficiently and how far a speaker can turn amplifier power into sound. A higher-wattage model can be quieter than a lower-wattage model if its drivers, enclosure, tuning, limiter or test conditions differ.

For a meaningful comparison, look first for maximum SPL with its distance, frequency range, weighting and peak or continuous basis. Then check sensitivity and the operating mode in which the figure applies. Use wattage as a clue about amplifier headroom and battery demand, never as a standalone volume ranking.

As an Amazon Associate I earn from qualifying purchases.

Special offer. See more information about Outbyte and uninstall instructions. Please review EULA and Privacy policy.

At a glance

Name Best for Key spec Checked
Watts (W) Estimating electrical power and possible headroom Amplifier or system input/output power; not a direct loudness score November 2026
Decibels (dB SPL) Expressing sound pressure at a stated point Logarithmic level that must include distance and measurement conditions November 2026
Sensitivity Comparing acoustic efficiency Usually dB SPL at 1 m for 1 W or 2.83 V November 2026
Maximum SPL Comparing loudness potential Upper sound-pressure level, meaningful only with its test basis November 2026

What do watts measure in a Bluetooth speaker?

Watts measure electrical power. In a Bluetooth speaker, the amplifier draws energy from the battery or power supply and sends an electrical signal to the drivers. The drivers convert only part of that input into acoustic energy; the rest is lost as heat, mechanical loss or other inefficiency. The watt figure therefore tells you about the electrical side of the system, not the sound-pressure level at your ears.

Manufacturers may publish amplifier output, total system power, nominal power, RMS or continuous power, and peak power. Those labels are not interchangeable. A short peak figure can describe a transient burst, while a continuous or RMS-style figure is intended to represent sustained operation under a stated test. A single product page may also combine the ratings of several drivers. Unless the definition and test conditions are clear, the number cannot be used as a precise volume comparison.

Popular on Amazon
Silkland 40Gbps USB C 90 Degree Right Angle Adapter 2 Pack, 240W USB4 | Male to Female Extender, 8K@60Hz, Thunderbolt 4/3, Steam Deck, ROG Ally, MacBook, Switch 2, iPhone 18/17/16/15, Quest 3 VR
  • 【90 Degree Full Function USB C Adapter】Supports the latest USB4 standard for up to 40Gbps of bandwidth, 8K video support, and up to 240W Fast charging; Support USB PD 3.1 Extended Power Range (EPR) including 140W, 180W and 240W. Your productivity is easily doubled. *Warm Tip: For the best fit, please make sure the USB-C port is fully exposed; thick or bulky cases may affect compatibility.
  • 【Reliable Quality】Made from high-quality, scratch-resistant aluminum alloy, delicate metal frame. get excellent wear resistance and heat dissipation. Non-Slip Design for easier insertion and removal.
  • 【Small and portable】Ultra thin size, ultra compact design, a petite physique that matches the minimalist design of your modern laptops. Coming with a slim figure that won't block the port next to the one it's plugged into.
  • 【Compatibility】Widely work with most usb c, thunderbolt 4/3 devices. Compatibilit for ROG Ally, Steam Deck, Switch, MacBook Pro, Quest 3 VR headset, Surface Book 2, iPhone 18/17/16/15, Samsung Galaxy S23/S22/S21, Note 20/10, Google Pixel, ChromeBook, etc.
  • 【Excellence Customer Support】If you experience any issues or cable failure, simply reach out to our dedicated customer service team. We provide a prompt response within 18 hours, providing you with the necessary technical support to resolve any concerns.

Power can still matter. More available electrical power may give a speaker more headroom before the amplifier clips, especially on bass-heavy material or musical peaks. But that advantage appears only when the drivers, enclosure and protection circuitry can use it. A speaker with a more efficient driver can produce greater SPL from less electrical input than an inefficient design with a larger amplifier rating.

HARMAN illustrates the central point with a deliberately simple comparison: “I can put 100 Watts into a light bulb, but it doesn’t make any sound at all (or shouldn’t).” The example appears in its discussion of moving beyond wattage when judging loudness, and it separates electrical input from acoustic output. A Bluetooth speaker is designed to make sound, but the same principle applies: watts alone do not specify how much sound reaches a listener.

Special offer. See more information about Outbyte and uninstall instructions. Please review EULA and Privacy policy.

Keep wattage separate from power handling. Power handling describes how much electrical input a driver or system is designed to tolerate. It is not the same as sensitivity, and it does not guarantee that the speaker will reach that level cleanly or continuously. The HARMAN explanation of SPL and watts treats these as different parts of a loudspeaker specification.

What do decibels measure?

A decibel is a logarithmic way to express a ratio. For speakers, the relevant quantity is usually dB SPL, or sound-pressure level. A dB SPL number describes the pressure variation produced by the speaker at a specified position, frequency or frequency range, and measurement setup. It is therefore much closer to what a listener means by loudness than an amplifier watt number.

Because the scale is logarithmic, equal numerical steps do not represent equal additions of acoustic power. In the simplified power relationship described by Axis Communications, doubling acoustic power is about a 3 dB increase. That is a technical relationship, not a promise that doubling a Bluetooth speaker’s advertised wattage will produce exactly 3 dB more at the listening position. Amplifier limits, driver excursion, thermal protection, enclosure design, battery voltage and signal processing can all prevent that outcome.

A dB figure without conditions is incomplete. A manufacturer might state a maximum level at 1 m, a level at a particular frequency, an average over a band, or a peak detected with a particular weighting. Two numbers that look comparable can describe different measurements. The Axis audio terminology guide notes a common convention in which an unspecified speaker SPL value is assumed at 1 kHz and 1 m. Treat that as the document’s convention, not a guarantee that every Bluetooth manufacturer uses it.

Special offer. See more information about Outbyte and uninstall instructions. Please review EULA and Privacy policy.

Do not confuse dB SPL with a volume-control percentage, Bluetooth codec bitrate or a gain setting. Those values describe different things. A phone set to 80 percent does not imply 80 percent of a speaker’s maximum SPL, and a higher codec bitrate does not make a speaker inherently louder.

Also popular on Amazon
Sale
Anker USB C Hub, 5-in-1 USBC to HDMI Splitter with 4K Display | 85W Max PD, 1 Powered USB-C 5Gbps & 2 Powered USB-A 3.0 5Gbps Data Ports, for MacBook Pro, MacBook Air, Dell and More (Black)
  • 5-in-1 Connectivity: Equipped with a 4K HDMI port, a 5 Gbps USB-C data port, two 5 Gbps USB-A ports, and a USB C 100W PD-IN port. Note: The USB C 100W PD-IN port supports only charging and does not support data transfer devices such as headphones or speakers.
  • Powerful Pass-Through Charging: Supports up to 85W pass-through charging so you can power up your laptop while you use the hub. Note: Pass-through charging requires a charger (not included). Note: To achieve full power for iPad, we recommend using a 45W wall charger.
  • Transfer Files in Seconds: Move files to and from your laptop at speeds of up to 5 Gbps via the USB-C and USB-A data ports. Note: The USB C 5Gbps Data port does not support video output.
  • HD Display: Connect to the HDMI port to stream or mirror content to an external monitor in resolutions of up to 4K@30Hz. Note: The USB-C ports do not support video output.
  • What You Get: Anker 332 USB-C Hub (5-in-1), welcome guide, our worry-free 18-month warranty, and friendly customer service.

Which specification is most useful for predicting loudness?

Maximum SPL is usually the most direct published indicator of how loud a speaker can become, provided the measurement details are comparable. Sensitivity is the next useful clue because it indicates how much SPL the speaker produces for a defined input. Wattage helps explain the amplifier’s electrical capability but cannot replace either acoustic specification.

Specification What it tells you What it cannot tell you by itself
Electrical watts Power available to the amplifier or system under a stated rating Actual SPL, efficiency, tonal balance or behavior at the battery’s low-charge point
Sensitivity Output produced for a defined input and distance Maximum output, bass extension or limiter behavior
Maximum SPL Stated upper sound-pressure level How clean, balanced or pleasant the speaker sounds at that level
Frequency response Which frequencies are reproduced and how evenly Overall loudness unless paired with an SPL measurement

In practice, compare maximum SPL figures only when they share the same distance, frequency or bandwidth, weighting and peak-versus-continuous basis. If one specification says 1 m peak and another says a continuous average at an unspecified distance, ranking them is misleading. No standardized, independently measured maximum-SPL figures are published for the Bluetooth models mentioned in current roundups, so a model cannot be declared objectively louder from a watt number or a casual product-listing comparison.

How does speaker sensitivity work?

Sensitivity describes the SPL a speaker produces for a specified input, commonly written as dB SPL at 1 W/1 m or dB SPL at 2.83 V/1 m. The first format uses one watt of electrical power. The second uses a fixed voltage. Those test bases are related, but they are not automatically equivalent at every impedance.

Special offer. See more information about Outbyte and uninstall instructions. Please review EULA and Privacy policy.

At an 8-ohm nominal impedance, 2.83 V corresponds approximately to 1 W. At another impedance, the same voltage produces a different amount of power, so a 2.83-volt sensitivity figure should not be compared directly with a 1-watt figure without accounting for impedance and the manufacturer’s method. Nominal impedance can also vary with frequency, making the relationship less tidy in a real speaker.

Sensitivity is an efficiency indicator, not a maximum-volume promise. A design rated at a higher dB figure may reach a given SPL with less amplifier power, while a design with lower sensitivity may need more power to reach the same level. The lower-sensitivity design could still have a higher maximum SPL if it has greater power handling, more excursion capability or a different system architecture.

Rating methods vary. The BICSI AV Design Reference Manual warns that manufacturers’ sensitivity measurements can differ, and it discusses sensitivity alongside power handling and directivity. Ask what signal, frequency range, distance, voltage or wattage and averaging method were used before treating two sensitivity numbers as a fair contest.

Why does listening distance change the result?

Sound pressure normally falls as you move farther from a speaker. HARMAN’s worked example gives a simplified rule: SPL drops by about 6 dB every time distance doubles. A level measured at 1 m would therefore be roughly 6 dB lower at 2 m, and another 6 dB lower at 4 m, under the illustrated free-field-style assumptions.

Special offer. See more information about Outbyte and uninstall instructions. Please review EULA and Privacy policy.
Also popular on Amazon
Sale
Anker USB C Hub, 7in1 Multi-Port USB Adapter, 4K@60Hz USBC to HDMI Splitter | 85W Max PD, 2 USB 3.0 & 1 USBC Data Ports, SD/TF Card Reader, for Laptops/Mac and Other Type C Devices (Charger Not Included)
  • Sleek 7-in-1 USB-C Hub: Features an HDMI port, two USB-A 3.0 ports, and a USB-C data port, each providing 5Gbps transfer speeds. It also includes a USB-C PD input port for charging up to 100W and dual SD and TF card slots, all in a compact design.
  • Flawless 4K@60Hz Video with HDMI: Delivers exceptional clarity and smoothness with its 4K@60Hz HDMI port, making it ideal for high-definition presentations and entertainment. (Note: Only the HDMI port supports video projection; the USB-C port is for data transfer only.)
  • Double Up on Efficiency: The two USB-A 3.0 ports and a USB-C port support a fast 5Gbps data rate, significantly boosting your transfer speeds and improving productivity.
  • Fast and Reliable 85W Charging: Offers high-capacity, speedy charging for laptops up to 85W, so you spend less time tethered to an outlet and more time being productive.
  • What You Get: Anker USB-C Hub (7-in-1), welcome guide, 18-month warranty, and our friendly customer service.

This is a useful way to understand why a speaker that seems loud beside a desk can feel inadequate across a room or outdoors. It is not a universal room correction. Walls, ceilings, floors, reflections, absorption, speaker placement and nearby surfaces change the measured result. Outdoor listening often has fewer reflections to reinforce the direct sound, while a small room can create peaks and nulls at particular frequencies.

The HARMAN distance and loudness discussion attributes this example to Charles Sprinkle, Principal Engineer, Loudspeakers. Use the 6 dB figure as a planning approximation, not as a guarantee for every Bluetooth speaker, room or listening position.

How should you compare two Bluetooth speakers?

Use the following sequence instead of sorting products by advertised watts.

  1. Find a maximum-SPL figure. Record the number, measurement distance, frequency or range, weighting and whether it is peak or continuous. If those details are absent, mark the figure as incomplete.
  2. Check sensitivity and its input basis. Note whether the rating is dB SPL at 1 W/1 m or 2.83 V/1 m. Do not mix the two casually, especially when nominal impedances differ.
  3. Match the listening distance. A desk speaker, a living-room speaker and an outdoor speaker have different output requirements. Apply the distance rule only as a simplified estimate and account for the environment.
  4. Confirm the operating mode. Battery mode, USB power, an optional mains mode, a low-charge state and thermal protection may not deliver the same output. Verify which mode the published specification covers.
  5. Look for limiter or protection behavior. Portable speakers often reduce bass or overall level at high output to protect drivers and batteries. A high peak rating may therefore be brief rather than sustainable.
  6. Compare frequency coverage and directivity. A speaker can produce a high measured peak while sounding thin, harsh or uneven. Directivity also changes how much level reaches listeners off-axis.
  7. Separate documented facts from retailer shorthand. “Powerful,” “room-filling” and “party volume” are descriptions, not standardized measurements. Ask the manufacturer for the test basis.

If no comparable SPL data exists, the honest result is that loudness cannot be ranked confidently from the available specifications. Choose by the intended distance, enclosure size, battery requirements and published evidence rather than inventing a conversion from watts to decibels.

Special offer. See more information about Outbyte and uninstall instructions. Please review EULA and Privacy policy.

Does more wattage ever make a Bluetooth speaker louder?

It can, but only when the rest of the system can use the additional power. More amplifier headroom may let a speaker play a transient without clipping, or maintain output when demanding bass causes the driver to move farther. A higher-powered amplifier paired with an inefficient driver, a strict limiter or a small battery may produce little or no useful increase in sustained SPL.

The reverse is also possible: a lower-wattage system can be louder at a particular distance if its drivers and enclosure are more efficient. This is why a fixed rule such as “twice the watts equals twice the loudness” is wrong. Even the simplified +3 dB power relationship assumes comparable acoustic systems and operating conditions, which a pair of Bluetooth products rarely shares.

Battery operation adds another constraint. The amplifier may be capable of a certain output when the battery is full, then reduce power as voltage falls or temperature rises. Digital signal processing can also change equalization and limiting at high volume. Treat any watt figure as a component specification unless the manufacturer ties it to a measured maximum SPL under the mode you need.

Also popular on Amazon
BENFEI USB C Hub 5-in-1 with 4K HDMI(Certified), 100W Power Delivery, 3 USB-A, Silicone Cable, Aluminum Case Compatible with MacBook Pro/Air, iPad Pro, iMac, iPhone 15 Pro/Pro Max, XPS, Thinkpad
  • Portable and powerful USB-C HUB: BENFEI USB Type-C HUB, with super-soft and knot-free silicone woven design cable, meets most mobile office needs. Compact, lightweight, stylish, and powerful portable USB C Hub equipped with 1 x HDMI port, 1 x 100W charging, and 3 x USB ports. 18-month warranty, 24-hour response, to ensure you feel at ease when using our product.
  • Design centered on comfort and reliability: Thanks to BENFEI's end-to-end in-house cable production capability, in-house PCBA and assembly capability, using the industry's most advanced silicone woven design and process, 20cm cable in length, no knots, super-soft, the HUB is easy to use in all scenarios: laptop, tablet, stand etc. Super-soft, 25000+ life cycles, to meet your daily carrying and office needs.
  • 100W Charging: Support up to 90W USB C pass-through charging via Type-C port to keep your laptop powered. 10W is reserved for other interface operations. No data and video function on the Type-C port.
  • 4K HDMI Display: The HDMI port supports media display at resolutions up to 4K 30Hz, keeping every incredible moment detailed and ultra vivid. Please note that the C port of the Host device needs to support video output.
  • Transfer Files in Seconds: Transfer files and from your laptop at speeds up to 10 Gbps with USB A 3.2 port. Extra 2 USB A 2.0 ports are perfectly for your keyboards and mouse.

How many watts are good for a home Bluetooth speaker?

There is no single watt number that is “good” for every home. A near-field listener at a desk needs less acoustic output than someone filling a large room, and a listener several metres away needs more level than someone sitting beside the speaker. Room reflections, content, bass requirements and desired headroom matter as much as amplifier power.

Special offer. See more information about Outbyte and uninstall instructions. Please review EULA and Privacy policy.

Instead of setting a watt target, define the use case: listening distance, room size, whether people will talk over the music, and whether the speaker must run from its battery. Then seek a maximum-SPL figure measured at a known distance, plus sensitivity and operating-mode information. If those data are missing, wattage can provide only a broad indication that the product has a larger or smaller amplifier; it cannot answer the loudness question by itself.

A 2026 What Hi-Fi? Bluetooth-speaker roundup suggests that a larger option such as the JBL Charge 6 may suit readers who prioritize loudness. That is editorial product-discovery context, not a standardized loudness test in the available evidence. A model-specific decision should still use the manufacturer’s current maximum-SPL specification and its test conditions.

Can you measure loudness at your own listening position?

Yes. A handheld sound-level meter can show the SPL at a chosen position, which is useful for checking whether a speaker meets a personal requirement. No particular meter is identified, and a phone app or inexpensive meter should not be treated as a standardized product-comparison instrument without a controlled setup.

For a repeatable home comparison, put each speaker in the same location, point it in the same direction, play the same passage at the same source level, and hold the meter at the listening position. Record the weighting, response time, distance and whether the reading is an average or a peak. Keep battery charge and power mode consistent. These steps improve repeatability, but they still describe your room and placement, not a universal laboratory rating.

Special offer. See more information about Outbyte and uninstall instructions. Please review EULA and Privacy policy.

A reading also needs context. Bass-heavy tracks can produce different results from speech or pink noise, and a single spot in a room may sit in a standing-wave peak or null. Use several listening positions if the goal is room coverage, and avoid presenting an app reading as proof that one product is objectively louder everywhere.

Independent reader supportYour contribution helps us test, update, and keep practical guides available for everyone.Support on Ko-Fi

What are the most common mistakes when reading speaker specifications?

  • Ranking watts as if they were decibels. Electrical input and acoustic output are different quantities.
  • Comparing unspecified SPL figures. Distance, frequency, weighting and peak or continuous basis can change the meaning.
  • Treating 2.83 V as one watt in every speaker. The voltage-to-power relationship depends on impedance.
  • Assuming a sensitivity rating is a maximum-SPL rating. Sensitivity describes output for a defined input; it does not state how far the system can be driven.
  • Ignoring distance. A 1 m specification does not tell you the level several metres away without accounting for propagation and the environment.
  • Confusing loudness with sound quality. A higher SPL can come with distortion, limiting, harsh treble or uneven bass.
  • Using a peak number for continuous listening. Short bursts and sustained output have different practical value.
  • Assuming mains and battery performance match. Protection circuits and battery limits can alter output by operating mode.

Which specification should matter for each listening situation?

For desk or near-field listening, prioritize tonal balance, low-volume control and a sensitivity or SPL figure measured at a short, known distance. Maximum output is less important if the speaker sits within arm’s reach.

Also popular on Amazon
Sale
𝟒𝐏𝐚𝐜𝐤 𝐔𝐩𝐠𝐫𝐚𝐝𝐞𝐝 USB to USB C Adapter,Type-C Female to A Male Charger Converter for iPhone 18 Charger,iWatch Ultra SE 9 10,iPhone 17 Pro Max 16 15 14,Samsung S25,AirPods,iPad,Car,Xbox
  • 【Read before You Buy】 Note: This adapter is USB 2.0 version and cannot transmit HDM, VGA, or other video signals. Nevertheless, they are fully capable of charging devices,duplicating files, and can be seamlessly integrated with USB-C earphones, wireless network adapters, and SD card adapters.
  • 【Easy to Use and Safe】Thanks to modern manufacturing techniques, we've made these adapters sufficiently compact so that they can remain inserted in your device without noticeable protrusion or inconvenience. This means you don't have to constantly plug and unplug them, reducing the likelihood of wear and misalignment, and making them more convenient to carry around.
  • 【Reliable Quality】Engineered for enhanced durability, durable aluminum alloy shell material,get excellent wear resistance and heat dissipation,the male USB C and female USB connectors & the male USB and female USB C connectors are designed to be plugged and unplugged up to 20000 times. Provides data transfer, device charging, memory space expansion, and additional computer peripherals.
  • 【Think more for you】Do you need to connect a USB-C-enabled device to an odd device that only has USB-A ports? Then these USB-A male to USB-C female adapters are made for you.Simply insert the adapter into the USB-A port on the device, and you can instantly connect your USB-C device to the device that originally didn't have the correct connection port.
  • 【Trusted xiwxi Quality and Service】As a responsible brand seller, you will receive xiwxi's 12-month Quality assurance and lifetime friendly customer service, you're not just buying a product,you're investing in peace of mind with all-round quality and exceptional customer service.

For a larger living room, look for continuous or clearly defined maximum SPL, check the measurement distance, and allow headroom beyond the level you normally need. A larger enclosure may help bass and efficiency, but physical size and wattage are only clues until the acoustic data are comparable.

For outdoor use, distance and reflections become more demanding. Favor a published SPL figure with a clear test basis, then check battery behavior, thermal limits and whether the specification applies in battery mode. Do not assume that a room-oriented rating transfers directly to an open space.

What’s actually slowing this PC down?

Pick the symptom - the matching free tool is one click away.

Special offer. See more information about Outbyte and uninstall instructions. Please review EULA and Privacy policy.

For speech, presentations or background music, intelligibility and even coverage may matter more than the highest peak. Sensitivity, directivity and frequency response can produce a clearer result at a lower measured maximum than a speaker tuned for bass-heavy playback.

What is the practical bottom line?

Use watts to understand electrical demand and possible headroom, but use maximum SPL and sensitivity to judge loudness potential. Compare only figures measured on the same basis, adjust expectations for listening distance and surroundings, and confirm whether the number applies to the battery or power mode you will use. When a product publishes only wattage and marketing adjectives, the evidence is insufficient for a reliable loudness ranking.

Frequently Asked Questions

Is a 2.83-volt sensitivity rating the same as a 1-watt rating?

Only at an impedance where 2.83 V produces about 1 W, commonly 8 ohms. At lower or higher impedances, the same voltage produces a different power level, so compare the input basis before ranking sensitivity figures.

Can two speakers with the same maximum SPL sound different?

Yes. Maximum SPL says how much sound pressure a system can produce under a stated test, not whether its frequency balance is smooth or its distortion is low. Directivity, bass tuning and limiter behavior can make two speakers with similar numbers sound very different.

Free tools Windows power users keep installed

One-click scans. No signup required.

Special offer. See more information about Outbyte and uninstall instructions. Please review EULA and Privacy policy.

Should I compare peak SPL or continuous SPL?

Continuous SPL is generally more useful for sustained music or speech, while peak SPL describes short transients. Use peak figures only when the other speaker reports peak under the same distance, frequency and weighting conditions.

Why can a Bluetooth speaker get quieter when its battery is low?

The amplifier may have less available voltage, and protection circuitry can reduce output to preserve the battery or prevent overheating. Check whether the manufacturer’s SPL or wattage specification applies to battery operation and whether it states a charge or power condition.

Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon at the time of purchase will apply. Prices as of November 16, 2026 4:56 am GMT+0530.

Leave a Reply

Your email address will not be published. Required fields are marked *

Special offer. See more information about Outbyte and uninstall instructions. Please review EULA and Privacy policy.

Recommended PC Tool
Recommended PC Tool
PC Slower Than It Used to Be?Free scan - under a minute
Outdated Drivers Are Slowing You DownFree scan - exact matches

Two free Windows tools

One Free Minute Could Fix That PC

Before you go - each of these free tools takes about a minute and tackles what quietly slows a Windows PC down.

Special offer. View Outbyte info, uninstall instructions, EULA, and Privacy Policy.