Recommended Free Tools
There is no single monthly price for running a 24/7 YouTube loop stream on Amazon EC2 in India. Your total depends on the EC2 instance and AWS region, running time, storage, internet data transfer, public IPv4 use, any other AWS services, and applicable taxes. To estimate it, configure the services you will actually use in the AWS Pricing Calculator rather than relying on a generic rupee figure.
How to estimate an EC2 loop stream’s monthly cost
Start with the compute baseline: the selected Linux EC2 instance’s hourly rate for the region where it will run, multiplied by its running hours in the billing month. A continuously running stream uses nearly all the month’s hours, so instance compute is a recurring cost—not just a short event charge. AWS bills On-Demand Linux instances by the second, with a 60-second minimum. Listed prices exclude applicable taxes and duties. AWS EC2 On-Demand pricing
As an Amazon Associate I earn from qualifying purchases.
Then add the other costs your configuration incurs. AWS’s Pricing Calculator lets you choose a location and enter EC2 configuration, storage, data transfer, Elastic IP, and other estimate inputs. Select the region where you plan to run the encoder and include the services you expect to use. A calculator estimate is only as specific as those choices.
What’s actually slowing this PC down?
Pick the symptom - the matching free tool is one click away.
Cost worksheet
| Cost component | How to account for it |
|---|---|
| EC2 compute | Choose the instance and region, then estimate its hourly rate over nearly the full month for a 24/7 stream. Instance type and regional rate determine the compute baseline. |
| Storage | Include the storage you attach and expect to use; the amount depends on your setup. |
| Data transfer | Estimate outgoing internet traffic for the stream and check how AWS applies its shared transfer tiers. |
| Public IPv4 or Elastic IP | Include the applicable address configuration in the calculator. |
| Other AWS services | Add any other services your configuration uses. |
| Taxes and duties | Account for applicable taxes and duties separately; AWS’s listed prices exclude them. |
AWS says 100 GB of internet data transfer out per month is free across AWS services and regions, except China and GovCloud. This is a shared allowance under current terms, not a separate 100 GB guarantee for each EC2 instance. Confirm the applicable terms when estimating. AWS EC2 On-Demand pricing
#1 Best Overall
- Compact but Powerful Design: ZowieBox is smaller than a phone, featuring a tally light and LCD screen for streaming status. Capture console gameplay in up to 4K with zero-lag HDMI passthrough, while the built-in video encoder converts video for IP streaming. The IP stream can also be decoded back to a 4K HDMI signal.
- Standalone Game Streaming: Just plug and play—ZowieBox enables PC-free live gaming without affecting gameplay. As an RTMP hardware encoder and HDMI streamer, it delivers stable streaming directly from your source, making it ideal for gaming, live events, and professional broadcasting.
- NDI|HX3 Converter Technology: ZowieBox converts HDMI signals to NDI|HX3/HX2/HX, functioning as an NDI video encoder, or NDI Video Decoder for flexible IP workflows. Certified NDI technology enables low-latency gameplay streaming through OBS/vMix. Note: Encoder and decoder modes cannot run simultaneously; full NDI signals are not supported.
- UVC to HDMI Conversion: Supporting up to 4K@30fps and 1080p@60fps decoding, ZowieBox enables flexible conversion for webcam and video workflows. As a video decoder and HDMI to IP converter, it expands connectivity options for professional video devices. Note: USB capture card functionality is not currently supported.
- All-around Configuration Options: Control ZowieBox through its web UI on a PC, phone, or tablet. Manage connected PTZ cameras, tally light, video/audio, OSD, work mode, streams, network, and system settings. Support for VISCA over IP encoder workflows enables flexible PTZ control, while the dashboard provides video preview and system status.
Why there is no universal AWS Mumbai monthly price
A precise INR total requires a defined instance type, storage amount, stream configuration, billing assumptions, and region-specific rates. The general AWS pricing information does not establish one complete Mumbai-region monthly quote for a loop stream, so quoting a single monthly amount without those inputs would be misleading. Use the calculator to build an estimate for your own configuration, then review the current AWS rates and tax treatment before committing.
The instance also has to handle the actual encoding workload. The required capacity can vary with resolution, frame rate, codec, and whether the machine must encode the video rather than relay an already encoded stream. Validate the encoder on the instance you select; do not assume a small instance can handle every setup.
Rank #2
- 【Innovative Product with Leading Technology】- Equipped with an advanced H.265 /H.264 dual encoding chip, supports 4K UHD (3840x2160) video input and output, with a maximum frame rate of 30fps at 4K resolution and up to 120fps at 2K and lower resolutions, delivering a smooth and detailed visual experience. It also supports HDCP 1.4 decryption, easily decoding various HDMI ultra HD video sources, delivering a cinematic visual experience for both professional live streaming and 4K ultra HD content transmission.
- 【Multi-protocol and Multi-platform Compatibility】- Fully compatible with streaming protocols such as HTTP, RTSP, RTMP(S), SRT, HLS(M3U8), MP4, Multicast(UDP, RTP, PTL), FLV, WebRTC, TRTC, ICECAST, it can simultaneously output 4 video streams with different protocols and push them to live streaming platforms such as YouTube, Facebook, Twitch, and Vimeo with one click. Simultaneous live streaming across multiple platforms can be achieved without additional equipment.
- 【Highly Customizable Settings to Meet Individual Needs】- It supports adding static text, scrolling captions, brand logos, and timestamps. Users can freely adjust core parameters such as video resolution, frame rate, and bitrate, and also perform personalized editing functions such as video cropping, rotation, flipping, and mirroring. It supports dual input of HDMI embedded audio and line-in audio, with adjustable sound quality, making your live stream content more distinctive and allowing you to create a unique brand live stream style.
- 【Stable and Efficient Transmission, Easy Operation】- Employing HDMI to Ethernet core connection technology, it ensures stable and reliable network transmission with low latency and no lag, adapting to various network environments. Equipped with an intuitive user interface and detailed instruction manual, no professional technical background is required; setup can be completed quickly after connecting the device. It is also compatible with multiple terminals such as computers and mobile phones for management, and the video stream status can be viewed in real time via a URL.
- 【Lifetime Free Warranty and Technical Supports】- All URayCoder video codecs come with a lifetime free warranty and technical supports, supporting secondary development and feature customization to meet enterprise-level personalized needs. Meanwhile, we providing many kinds of customization services such as shell pattern printing, logo addition, hardware and function development, ensuring reliable quality and worry-free after-sales service.
Choose stream settings before estimating
Resolution, frame rate, codec, and bitrate are technical choices, not direct EC2 prices. They shape the encoder workload and stream configuration, so state them as assumptions in your estimate and test the workload on the selected instance. YouTube’s current encoder table recommends these H.264 bitrates for two common settings:
| Video setting | YouTube H.264 bitrate recommendation |
|---|---|
| 1080p at 30 fps | 5 Mbps |
| 720p at 30 fps | 3 Mbps |
YouTube lists RTMP and RTMPS as supported streaming protocols and recommends RTMPS. These are YouTube encoder-ingest recommendations, not estimates of AWS cost. Check YouTube’s current table for other resolutions, frame rates, and codecs. Choose live encoder settings, bitrates, and resolutions
Rank #3
- 【Hardware H.265/H.264 Encoding at 1080P60】Dedicated hardware encoder delivers broadcast-quality 1080P60 streams with H.265/H.264 compression. Reduces bandwidth usage by up to 50% compared to legacy H.264-only solutions, while maintaining crisp, crystal-clear video output.
- 【Broad Protocol Support for IP Distribution】 Supports SRT, RTMP(S), RTSP, UDP, HTTP, HLS, WebRTC, TRTC, Icecast and SHOUTcast — integrate seamlessly with CDNs, surveillance NVRs, IPTV systems and browser-based monitoring dashboards. One device replaces multiple single-purpose streaming boxes.
- 【Browser-Based Setup in Minutes】 Set up in minutes through any browser — no software, drivers or OS compatibility issues. DHCP is enabled by default to prevent IP address conflicts on your network. Note: basic networking knowledge (IP address, RTSP/RTMP configuration) is recommended for advanced streaming setups.
- 【Compact Design with Flexible Deployment】Palm-sized form factor (approx. 90×54×29mm) fits easily behind monitors, on shelves, or in equipment racks. Low power consumption ensures reliable 24/7 operation for live events, remote monitoring, and digital signage.
- 【Professional Audio & OSD Overlay + 1-Year Warranty】 Supports HDMI embedded audio plus external 3.5mm input. Built-in OSD generator adds scrolling text, logos, or timestamps directly to the video stream — ideal for branding, event info, or security labeling. Backed by a 1-year warranty and 24/7 online technical support.
Check YouTube eligibility and stream health
Cloud compute does not bypass YouTube’s channel requirements or content rules. YouTube says the channel must be verified and have no live-streaming restrictions in the past 90 days to get started with live streaming. It also states: “All content in live streams must adhere to our Community Guidelines and Terms of Service.” Renting EC2 does not establish that a channel is eligible or that a particular repeated-loop format complies with YouTube’s rules. Get started with live streaming
YouTube recommends leaving 20% of upload bandwidth available beyond the total stream bitrate, testing the encoder setup, and monitoring stream health. These are operational recommendations, not a guarantee of uninterrupted streaming. Streaming tips
Rank #4
- 4K & HD STREAMING IN H.264 AND H.265 – Self-contained processor supporting H.264 and H.265 encoding in HD or Ultra HD (up to 2160p60) via SRT or RTMP, streaming directly to YouTube, Facebook, X, Twitch, Zoom, Microsoft Teams, OBS, Wowza, and many more — no encoding PC needed.
- 12G-SDI INPUT WITH STANDARDS CONVERSION – Supports input resolutions up to DCI 4K60 with an SDI input and SDI loop output, plus Teranex-powered automatic standards conversion so any HD or Ultra HD source streams cleanly at any target resolution.
- DUAL MONITOR OUTPUTS – Features both SDI and HDMI monitor outputs with a user-configurable standards converter on both the 12G-SDI Out and 4K HDMI Out, so you can feed a confidence monitor or downstream device at any required format independent of your streaming standard.
- ETHERNET + 5G/4G MOBILE WITH AUTO-FAILOVER – Connect via Gigabit Ethernet (10/100/1000BASE-T) or tether a smartphone via USB-C for mobile data, with automatic switchover between connections — ensuring your stream stays on air even if the primary internet connection drops.
- CLOSED CAPTIONS, TIMECODE & REST API – Supports embedding CEA-608 and CEA-708 closed captions in live RTMP streams, source timecode over RTMP and SRT, and offers a REST API over Ethernet for external HTTP control — ideal for broadcast automation and accessibility-compliant workflows.
Or let it run in the cloud
If you do not want to configure and maintain an EC2 encoder, StreamNeo is a cloud service that keeps a YouTube channel live from uploaded videos. Upload a recording or build a playlist, add your YouTube stream key once, and go live. StreamNeo loops the uploaded video from the cloud; it does not stream from a camera.
- Your computer and home connection do not have to stay on.
- Every slot streams what you upload, up to 4K at 60 fps, at one flat price per slot with no re-encoding or quality tiers.
- Automatic recovery is included if YouTube drops the stream.
- The first day is free, with no card required; it is one free day per account.
Plans offer the same product and features; only the billing length changes. A slot includes one always-on stream, 10 GB storage per slot pooled across active slots, 24/7 looping and playlists, automatic recovery if YouTube drops the stream, and StreamNeo team support. The monthly option is $9.99 per month. UPI and cards are available in India; card checkout is available worldwide. For five or more slots, contact support. See StreamNeo for details and plan information.
Quick Recap
Best Value
- ⭐【Innovative Product with Leading Technology】- Equipped with an advanced H.265 /H.264 dual encoding chip, supports 4K UHD (3840x2160) video input and output, with a maximum frame rate of 30fps at 4K resolution and up to 120fps at 2K and lower resolutions, delivering a smooth and detailed visual experience. It also supports HDCP 1.4 decryption, easily decoding various HDMI ultra HD video sources, delivering a cinematic visual experience for both professional live streaming and 4K ultra HD content transmission.
- ⭐【Multi-protocol and Multi-platform Compatibility】- Fully compatible with streaming protocols such as HTTP, RTSP, RTMP(S), SRT, HLS(M3U8), MP4, Multicast(UDP, RTP, PTL), ONVIF, FLV, WebRTC, TRTC, ICECAST, it can simultaneously output 4 video streams with different protocols and push them to live streaming platforms such as YouTube, Facebook, Twitch, and Vimeo with one click. Simultaneous live streaming across multiple platforms can be achieved without additional equipment.
- ⭐【Highly Customizable Settings to Meet Individual Needs】- It supports adding static text, scrolling captions, brand logos, and timestamps. Users can freely adjust core parameters such as video resolution, frame rate, and bitrate, and also perform personalized editing functions such as video cropping, rotation, flipping, and mirroring. It supports dual input of HDMI embedded audio and line-in audio, with adjustable sound quality, making your live stream content more distinctive and allowing you to create a unique brand live stream style.
- ⭐【Stable and Efficient Transmission, Easy Operation】- Employing HDMI to Ethernet core connection technology, it ensures stable and reliable network transmission with low latency and no lag, adapting to various network environments. Equipped with an intuitive user interface and detailed instruction manual, no professional technical background is required; setup can be completed quickly after connecting the device. It is also compatible with multiple terminals such as computers and mobile phones for management, and the video stream status can be viewed in real time via a URL.
- ⭐【Lifetime Free Warranty and Technical Supports】- All URayCoder video codecs come with a lifetime free warranty and technical supports, supporting secondary development and feature customization to meet enterprise-level personalized needs. Meanwhile, we providing many kinds of customization services such as shell pattern printing, logo addition, hardware and function development, ensuring reliable quality and worry-free after-sales service.
Start your free first day with StreamNeo.
Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon at the time of purchase will apply.
