For one fireplace video, create a simple OBS scene with a Media Source, select the local clip, and turn on Loop. Then set output resolution, frame rate, and bitrate to fit your streaming platform, source footage, computer, and upload connection. There is no single preset that is best for every setup, and OBS on a home computer is not an uptime guarantee.
Build a scene that loops one fireplace clip
- In OBS, add a scene for the fireplace stream and keep it focused on the video and its audio.
- In the scene’s Sources panel, click + and choose Media Source. Select the local fireplace recording.
- Enable Loop so playback starts again when the clip ends. Check the source’s playback options, including restarting when visible, hardware decoding when available, hiding at the end, and closing the file while inactive, as appropriate for your scene. See the OBS Media Sources documentation.
- Keep the clip’s crackling audio, or add a separate audio source if that is how your setup is built. Confirm the intended source is active and watch the Audio Mixer meters while it plays.
- Preview the scene and let the clip reach its end once. Confirm the video restarts cleanly and the fire remains visible; listen for the crackling audio at the level you intend to stream.
A VLC Video source is an alternative if you need a playlist. Its documented loop-playlist behavior is enabled by default, but VLC must be installed. For a single local clip, Media Source is the simpler fit. (OBS Media Sources.)
As an Amazon Associate I earn from qualifying purchases.
Choose output settings for your platform and setup
Use the resolution you actually intend to stream, a frame rate the source and computer can sustain, and a video bitrate that stays within both your stable upload capacity and the platform’s current ingest limits. Check the platform’s current requirements rather than treating general OBS guidance as a universal preset.
Do these 3 things before closing this tab:
1Scan for outdated or missing drivers - takes under a minute2Repair Windows errors before they cause bigger problems3Fix the driver behind crashes, sound loss and screen glitchesResolution and frame rate
Match output resolution to the level of detail you need and can deliver reliably. A higher resolution can show more detail in the flames, but it also demands more from the connection and encoding setup. Set frame rate with the source and machine in mind. OBS uses 30 and 60 FPS as examples and cautions that 60 FPS can be more taxing than 30 FPS. For a mostly static fireplace scene, weigh smoother motion against that extra load instead of assuming the higher frame rate is automatically better. (OBS Studio Overview Guide.)
#1 Best Overall
- Easy to Use works on all televisions small and large widescreens
- Plays automatically and continues to repeat!
- #1 Seller - Your choice of Crackling or Music Option - Extended edition!
- Excellent quality and clarity.
- Full length of Fire is 60 minutes from start to finish
Video bitrate and upload stability
OBS’s connection troubleshooting guide gives 75% of total upload speed as a starting point for video bitrate. Treat that as a diagnostic starting point, not a promise: upload can fluctuate, and the selected bitrate must also comply with the streaming service’s limits. If dropped frames persist, lower the bitrate and check the ingest service’s limits. (OBS Stream Connection Troubleshooting.)
Audio bitrate
OBS’s overview describes about 160 kbps as a general audio streaming reference, while noting that lower values may suit a limited upload connection. This is general guidance, not a current requirement for every platform; check the service’s latest specifications. (OBS Studio Overview Guide.)
Rank #2
- DVD FEATURES 6 GREAT FIRES: Fireplace xl features three long fireplaces of 25 minutes and three themed fireplaces: - christmas fireplace - classic fireplace - log cabin fireplace
- VIRTUAL FIREPLACE: Turn your TV into a realistic fireplace. You will have the same experience as if it was a real fireplace, but without having to chop the logs and clean up in the morning
- VERSATILE BACKDROP: A party entertainment for guests, bonding moments with the kids, favorite book reading to relax, or a romantic evening with a loved one
- HD AND DIGITAL: All tracks filmed with HD cameras and professional digital audio equipment
- VIDEO LOOP: Our DVD were programmed to give you a continuous fire on your TV
Start with the wizard, then test
OBS’s Auto-Configuration Wizard can help establish a starting point by considering intended use, computer hardware, and network conditions. Treat its result as a starting configuration: test the actual scene and stream before relying on it for a long broadcast. OBS strongly recommends testing a configuration before a first live stream. (OBS Studio Overview Guide; Auto-Configuration Wizard.)
Prepare OBS for a long-running stream
- Turn on Automatic Reconnect in OBS’s Advanced settings so OBS can attempt to reconnect after a disconnection. This helps with recovery but does not guarantee continuous uptime. (OBS Studio Overview Guide.)
- Keep the scene lean. OBS uses GPU resources to render and composite scenes. Unnecessary sources, complex browser overlays, and media much larger than the output requires can increase system load. (OBS Studio Overview Guide.)
- Watch the dropped-frame counter. OBS says dropped frames point to an unstable connection to the ingest server or an inability to sustain the selected bitrate. Reduce bitrate and, where appropriate, try a different server or service. (OBS Stream Connection Troubleshooting.)
- Test the actual stream. Verify that playback loops, the picture stays visible, and crackling audio is present at the intended level. A successful preview alone does not test the full streaming path.
Troubleshoot drops, playback, and buffering
| Symptom | What to check | What to try |
|---|---|---|
| The fireplace clip stops at the end | Confirm the source is a Media Source and that Loop is enabled. | Enable Loop, then preview through the end of the clip again. (OBS Media Sources.) |
| The crackling audio is missing or too quiet | Check that the intended audio source is active and that its Audio Mixer meter responds during playback. | Correct the source or level, then test the live output and listen to it. |
| OBS reports dropped frames | Check for an unstable connection to the ingest server or a bitrate the connection cannot sustain. | Lower video bitrate; also respect the platform’s bitrate limits and consider a different server or service where appropriate. (OBS Stream Connection Troubleshooting.) |
| Viewers report buffering, but OBS shows no dropped frames | Consider the bitrate, resolution, frame rate, platform transcoding, and viewer-device constraints. | Test a lower-demand output configuration and check whether the viewing problem changes. (OBS Studio Overview Guide.) |
| The stream disconnects | Check the connection and whether OBS is configured to reconnect automatically. | Enable Automatic Reconnect in Advanced settings and monitor whether the stream returns. Reconnect settings reduce manual recovery; they are not a continuous-uptime guarantee. (OBS Studio Overview Guide.) |
| OBS struggles to render the scene | Look for unnecessary sources, complex overlays, or oversized media that adds avoidable GPU work. | Remove what the scene does not need and use media sized sensibly for the intended output. (OBS Studio Overview Guide.) |
Or let it run in the cloud
If you want a YouTube fireplace stream to continue without leaving a home computer on, StreamNeo runs uploaded videos from the cloud. Upload your recording, add your YouTube stream key, and go live. It does not stream from a camera or to other platforms.
Rank #3
- Enjoy a real wood burning fire (not a gas log imitation)!
- Recorded to provide the highest spectrum of flame color.
- Dolby Digital Sound of the actual wood burning fire snapping and crackling!
- Fill the entire screen of widescreens and standard sized screens! (no annoying letterbox "black bars")
- Easy to loop any of the three phases (beginning, middle, end) or play all three in sequence.
- Nothing has to stay on at home.
- Any uploaded quality up to 4K 60fps streams as made at one flat price per slot.
- Automatic recovery if YouTube drops the stream.
- The first day is free with no card; one free day per account.
Monthly: $9.99 per month. Start your free day on StreamNeo.
Quick Recap
Best Value
- CHRISTMAS FIREPLACE DVD VIDEO: Turn your TV into a festive fireplace scene with a crackling wood fire, Christmas decor and gentle camera framing delivered as a pre-recorded DVD video
- FAMILY-FRIENDLY HOLIDAY AMBIENCE: Relax with realistic crackling fire sounds and soft Christmas music, suitable for children, grandparents and guests of all ages
- VISUAL BACKDROP FOR GATHERINGS: Serves as a visual background during Christmas dinners, parties or quiet evenings at home set your DVD player to repeat for continuous ambient playback
- VIDEO ONLY NO REAL HEAT OR FLAMES: This product is a decorative DVD video for your TV or DVD player. It is not a heater, not an electric or gas fireplace, and does not produce any warmth
- COZY INDOOR ATMOSPHERE: Enjoy being snug inside while it storms outside, creating a warm and inviting environment during cold winter evenings
Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon at the time of purchase will apply.
