To program a cleaning schedule on a Goovi robot vacuum, first identify its exact model. Manuals for the D380 and F007C describe setting the remote’s clock, then using that remote to choose and confirm a schedule time. The J20C manual also assigns appointment timing to the remote, but does not establish the same button sequence. Keep the remote near the robot and follow the manual for your model.
Check your model before pressing buttons
Goovi controls are not established as identical across models. The steps below apply to the D380 and F007C manuals; for the J20C, use its own illustrated instructions. These instructions come from archived manual copies, not a current official Goovi support page, so they do not establish scheduling behavior for every Goovi vacuum.
As an Amazon Associate I earn from qualifying purchases.
Program a D380 or F007C schedule
- Place the remote near the robot. Both manuals direct users to keep it nearby while setting the clock or schedule.
- Set the remote clock first. On the D380, press the clock control until the hour flashes, adjust the value, switch between hour and minute, and confirm. The robot beeps when clock setup is complete. The F007C manual describes using its clock button and up/down controls, moving between hour and minute with the stated remote controls, then confirming with play. Check the manual or remote itself for the icons; archived text may not render them reliably.
- Enter schedule setting. Press the schedule control on the remote.
- Choose the start time. Adjust the hour and minute with the remote controls, following the exact model’s instructions.
- Confirm. The D380 and F007C manuals describe confirmation and a beep when schedule setup is complete.
The general sequence is similar for these two models, but do not assume their button symbols or control behavior are interchangeable.
What the J20C manual establishes
The J20C manual says appointment timing is set through the remote and that the remote time should match local time before an appointment is set. It does not establish the D380 or F007C button-by-button sequence for the J20C. Use the J20C manual’s illustrated controls rather than applying another model’s directions.
#1 Best Overall
- Perfect Compatibility: Our accessory set is well compatible with Goovi 1600PA D380 D382, Goovi by ONSON F007C (Goovi 2000PA), Goovi by ONSON J10C (Goovi 2100PA),Coredy R3500 R3500S R550(R500+) R580 R650 R600 R700 R750 DeenKee DK600 Bagotte BG600 Robot Vacuum you do not need to worry about the problem that it cannot be installed or that it cannot perform cleaning
- Quality Is Guaranteed: The product set includes 1 main brush, 8 side brushes, 4 filters, and a blue cleaning brush. The bristles of the main brush and the side brushes are made of nylon. The surface of the nylon bristles is smooth, and the bristles of this material are not easy to bend while cleaning. Also, the slender bristles can be used to deeply clean the floor and the carpet gaps
- Improve Air Quality: You can improve the air quality in your home with these high-quality replacement filter sets, a one-stop solution to your robot vacuum maintenance needs
- Easy Installation: Since our replacement accessories are well-compatible with your vacuum robot, the installation method is the same as the original, and you can easily install and use it! P.S. If the side brush bristles are bent during installation, don't worry. This is not a quality issue, but some transportation issues. You only need to soak it in hot water for 15 seconds to recover it
- Worry-Free Shopping: Our store has intimate shopping services. We will do our best to provide the products and services you need, whether it is at the time of purchase or after purchasing. If you have any questions or comments about our product, you can contact our customer service. Let’s say goodbye to the cleaning troubles
Cancel a scheduled clean
For the D380 and F007C, the manuals describe holding the schedule control for about four seconds. The D380 manual reports a beep; the available F007C manual copy reports two beeps. Treat the sound as model-specific feedback, not a universal Goovi cancellation signal.
Quick Recap
Best Value
- 100% compatible with Coredy Robot Vacuum Cleaner R3500, R3500S, R500+ (2nd Generation Dust Bin Only), R580, R600 (2nd Generation Dust Bin),R650, R750 (R700), G800, Goovi D380, D382 (Goovi 1600 Pa), Goovi by Onson F007C (Goovi 2000 Pa), Goovi by Onson J10C (Goovi 2100 Pa), iMartine C800, D900 D900C, Deenkee DK600. Do not fit Coredy R500+ 1st Generation Dust Bin.
- All In One Set with More Affordability - We are offering a complete set of consumable replacement parts for your machine with more affordability than other replacement parts on the market. The package include 6 highly efficient Hepa-style filters, 2 openable filter cases, 10 heavy-duty side brushes, 1 main rolling brush, 1 clean brush with cutter to cut entangled hair, 1 screw driver and 1 pair of disposable gloves for clean installation to perform at same level as OEM parts, but more budget friendly.
- Outstanding Dust Removal Performance- Our high-efficiency replacement parts are manufactured under strict quality control and can keep your vacuum running at tip-top performance.Our the dual sweeping side brushes are made with high-strength bristle to collect more dust in a unit area. The main rolling brush is made of premium rubber and dense bristles to remove the dust and stains from your floor effectively and thoroughly.
- Filter Microscopic for Superior Clean -The hepa-style filters are designed to capture microscopic particles that are too small to be trapped inside the dustbin. The durable plastic filter cases give it more durability over time. The filter case is reusable and washable. We recommend you to re-use filter case to reduce plastic waste and protect our earth!
- Tested Functioning - Our replacement parts have been tested on compatible machines for appropriate functioning and machine protection.
Rank #4
- VACUUMS AND MOPS IN ONE PASS — Vacuums with a suction power of 15,000 Pa to lift crumbs and fine dust while the pad mops everyday buildup, covering up to 900 sq ft/charge, ideal for small to medium-sized homes.
- EASY, EFFECTIVE MOPPING — The washable microfiber pad gently lifts dusty pawprints and light smudges on sealed hard floors, and you can set a No Mop Zone so rugs stay protected and won’t get wet while you mop.
- CLEARVIEW LiDAR MAPS ROOMS AND AVOIDS OBSTACLES — Cleans in neat rows, even in low light, steering around shoes, pet bowls, and furniture, and navigates confidently in multi-room layouts including hallways and open living spaces.
- THOROUGH EDGE AND CORNER CLEANING — An extended mop pad and edge-sweeping brush work together to clean along baseboards and into corners other robots miss.
- GREAT FOR PET FAMILIES — Anti-hair-wrap brushes resist pet-hair wrappings, helping busy homes with pets and kids stay cleaner.
Rank #3
- 𝗨𝗹𝘁𝗿𝗮-𝗣𝗼𝘄𝗲𝗿𝗳𝘂𝗹 𝗗𝗲𝗲𝗽 𝗦𝘂𝗰𝘁𝗶𝗼𝗻: HyperForce 8,000 Pa lifts dust, hair, and debris from floor cracks and deep within carpets — for spotless floors, every time
- 𝗗𝘂𝗮𝗹 𝗔𝗻𝘁𝗶-𝗧𝗮𝗻𝗴𝗹𝗲 𝗕𝗿𝘂𝘀𝗵𝗲𝘀: A specially designed main brush and zero-tangle side brush prevent hair wrap, ensuring smooth cleaning and minimal maintenance, perfect for homes with pets.
- 𝗣𝗿𝗲𝗰𝗶𝘀𝗶𝗼𝗻 𝗟𝗶𝗗𝗔𝗥 𝗡𝗮𝘃𝗶𝗴𝗮𝘁𝗶𝗼𝗻: 360° laser mapping scans your home in real time, plans the most efficient route, and saves multiple floor maps for easy navigation
- 𝗩𝗮𝗰𝘂𝘂𝗺 & 𝗠𝗼𝗽 𝗶𝗻 𝗢𝗻𝗲 𝗚𝗼: The 270 ml water tank lets you vacuum and mop at the same time. With three water levels and a removable mop pad, it tackles everything from fine dust to dried-on stains. Reminder: The water tank and dustbin are designed as a single integrated combo part
- 𝗥𝗼𝗯𝗼𝗿𝗼𝗰𝗸 𝗔𝗣𝗣 & 𝗩𝗼𝗶𝗰𝗲 𝗖𝗼𝗻𝘁𝗿𝗼𝗹: Take full control of your robot with the Roborock app. Adjust suction levels, schedule cleaning for specific times or rooms, set up No-Go Zones to avoid specific areas, and enable child lock for the safety of children and pets. For ultimate hands-free convenience, use voice commands via Alexa or Google Home to start, stop, pause, resume cleaning, or send your robot back to the dock effortlessly
Rank #2
- 【2-in-1 Mopping and Vacuuming】 The ROPVACNIC Robot S1 integrates advanced electronically controlled mopping technology, significantly enhancing both cleaning efficiency and effectiveness, which makes your floors remain free from footprints, dirt, and dust throughout the day. It features an upgraded high-capacity water tank with a four-stage personalized water adjustment system, enabling it to address various stains across different settings according to user requirements.
- 【Comprehensive Intelligent Control】 Multiple Cleaning Modes, combined with personalized settings, allow you to easily accomplish various household cleaning tasks with zero effort from your smartphone. Moreover, by voice commands, you can start your cleaning while kicking back and relaxing (compatible with Alexa or Google Assistant). Enjoy an utterly hands-free cleaning experience.
- 【5200Pa Powerful Suction】A 3-point cleaning system coupled with strong suction ensures your floors are free from all dirt, dust, and crumbs for a thorough, superior clean. The highly passable compact design combined with 3-level suction facilitates cleaning in hard-to-reach areas where you can't, making it suitable for a wide range of surfaces from wood, and hard floors to low pile carpets.
- 【Smarter High Automation & Self-Recharge】 The robot aspiradora is equipped with an advanced high-coverage sensing system and multiple algorithmic data points, enabling autonomous completion of cleaning tasks—from scheduled starting, detecting obstacles, adjusting direction, and switching modes, to automatically returning to recharge. This hassle-free operation ensures a clean home when you return.
- 【Engineered for Pet Owner】 The exclusive no-entanglement design negates the need for your dirty hands to clean up tangled dog or cat hair, unlike traditional roller brushes. Its dual rotating electric side brushes sweep and collect hidden pet hair more efficiently throughout the house, saving you the hassle.
If the schedule does not work
- The clean starts at the wrong time: Check that the remote clock matches local time, as the J20C manual advises.
- The robot does not acknowledge setup: Keep the remote close and repeat the steps from the exact model’s manual. The D380 and F007C manuals describe a beep after settings are completed.
- The remote is missing or faulty: Match a replacement to the exact vacuum model. The reviewed D380 manual identifies a remote as central to scheduling, but does not verify a replacement part number, compatibility across models, or current availability.
- You are looking for an app option: The manuals reviewed establish remote scheduling for the D380, F007C, and J20C only. They do not establish whether other Goovi models schedule by app or remote.
Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon at the time of purchase will apply.




