To use the original DJI Mic, turn on its transmitter and receiver, connect the receiver to your phone, camera, or computer using the correct adapter or cable, then make a short test recording and check the audio. The transmitter and receiver are linked by default. This guide covers the first-generation DJI Mic only—not DJI Mic 2, DJI Mic 3, or DJI Mic Mini.
What you need before recording
The original DJI Mic sends audio from one or two transmitters to a receiver, which connects to your recording device. Check the contents of your kit before setup: package contents vary, and DJI says the one-transmitter/one-receiver kit does not include a charging case. Charge the receiver and transmitter before use. See DJI’s original DJI Mic FAQ for kit and connection details.
As an Amazon Associate I earn from qualifying purchases.
- The transmitter clips to clothing or can be attached with the supplied clip magnet where suitable.
- For outdoor or windy recording, fit the windscreen by aligning it with the transmitter slots and rotating it clockwise until it locks.
- The receiver can connect to as many as two transmitters.
Connect and link the transmitter and receiver
The original transmitter and receiver are linked by default, so in a normal setup you can switch them on and proceed to connect the receiver to your recording device. If they need to be linked again, use the receiver’s touchscreen:
Do these 3 things before closing this tab:
1Clear out junk files and repair common Windows errors2Scan for outdated or missing drivers - takes under a minute3Repair Windows errors before they cause bigger problems- Switch on both the receiver and transmitter.
- On the receiver, open Control Center, go to Settings, and choose Link.
- Press and hold the transmitter’s link button until its indicator flashes green.
- Confirm that the link indicators turn solid green.
These are DJI’s instructions for the original model; do not use Bluetooth pairing directions intended for later DJI Mic generations. See DJI’s FAQ or download center for the manual and compatibility resources.
#1 Best Overall
- Small but Mighty - The DJI Mic Mini lavalier microphone transmitter is small and ultralight, weighing only 10 g, [1] making it comfortable to wear, discreet, and aesthetically pleasing on-camera.
- Detail-Rich Sound - Mic Mini wireless microphones delivers high-quality audio. A 400m max transmission range [2] ensures stable recording, even in bustling outdoor environments like a busy street. 48kHz sampling & 120 dB SPL for full, clear sound, 48h battery life with charging case [3].
- Extended Battery, More Recording Time - Mic Mini wireless lavalier microphone with Charging Case offers up to 48 hours of battery life, [3] ideal for long trips, interviews, livestreaming and other intensive usage scenarios.
- DJI Ecosystem Direct Connection - With DJI OsmoAudio, a transmitter can connect to Osmo Nano, Osmo 360, Osmo Mobile 7P, Osmo Action 5 Pro, Osmo Action 4, or Osmo Pocket 3 without a receiver, delivering premium audio.
- Powerful Noise Cancelling - 2 noise cancellation levels are available—Basic is ideal for quiet indoor settings, while Strong excels in noisy environments to give you clear vocals. [8]
Connect the receiver to your recording device
Phone: use the matching DJI adapter
Insert the matching DJI Mic phone adapter into the receiver’s bottom expansion port, then connect the receiver to the phone. DJI lists USB-C and Lightning adapter types. Open your video or audio recording app and make a brief test recording. Check DJI’s compatibility resources for your particular phone.
DJI says Stereo mode is not supported when the original receiver is connected to an iPhone through the Lightning adapter. If you need stereo from two transmitters, confirm the phone connection supports the channel arrangement you intend to record.
Rank #2
- Lightweight & Intuitive, Compact Storage [9] - Take it anywhere—this wireless mic fits in your pocket or bag, ready for travel vlogs, street interviews, or capturing ideas on the go.
- 4TX + 8RX Capability & Four-Channel Output [1] - This lavalier mic's receiver can pair with 4 TX and sync audio to 7 additional RX—ideal for podcasts or group interviews.
- Consistent, Balanced Audio in Every Scene - Whether you're whispering or shouting, this wireless mic's adaptive gain control [5] keeps your audio crisp in busy cafes or outdoor adventures.
- Sound Your Best, Anywhere You Record - Choose from three voice tones [3] and two noise-cancelling [5] levels of this wireless mic to match your vibe—cut the noise in studios, parks, or city streets.
- Crystal-Clear Audio, Even in Crowded Spaces - Dual-band anti-interference [2] of this wireless mic ensures flawless, lossless audio transmission, even at live events or in busy offices.
Camera: connect the receiver’s audio output
- Mount the receiver on the camera’s hot shoe using its hot-shoe adapter.
- Connect the receiver’s 3.5 mm output to the camera’s microphone input with the 3.5 mm camera connection cable.
- Start a camera recording and check the camera’s microphone input and recording level.
Camera ports and controls vary, so consult the camera manual for its microphone jack and input-level settings. DJI’s FAQ explains the connection, and its camera connection troubleshooting guide covers silent recordings.
The Tool Desk
Outbyte PC Repair FREERepair Windows errors before they cause bigger problemsFix Now →Outbyte Driver Updater FREEFix the driver behind crashes, sound loss and screen glitchesFind Drivers →Computer: select the receiver as the input
DJI describes connecting the receiver to a PC with a standard charging cable and selecting the appropriate audio input. Depending on the computer’s ports, the connection may use USB, USB-C audio, or a 3.5 mm audio input. If the computer has separate microphone and headphone ports, or only a combo jack, the required cable or splitter can differ. In the operating system’s sound settings and in your recording app, select the DJI receiver or microphone input, then make a test recording.
Rank #3
- Small but Mighty - The DJI Mic Mini Transmitter is small and ultralight, weighing only 10 g [1], making it comfortable to wear, discreet, and aesthetically pleasing.
- Detail-Rich Sound - Mic Mini delivers high-quality audio. A 300m max transmission range [2] ensures stable recording, even in bustling outdoor environments like a busy street.
- Record Longer - Two transmitters and a mobile receiver offer a maximum operating time of 11.5 hours [5]. That's enough time for high-usage scenarios like interviews.
- DJI Ecosystem Direct Connection - With DJI OsmoAudio, a transmitter can connect to Osmo Nano, Osmo 360, Osmo Mobile 7P, Osmo Action 5 Pro, Osmo Action 4, or Osmo Pocket 3 without a receiver, delivering premium audio.
- Powerful Noise Cancelling - 2 noise cancellation levels are available—Basic is ideal for quiet indoor settings, while Strong excels in noisy environments to give you clear vocals. [8]
Choose the recording mode and check the signal
Mono or Stereo
- Mono (M): audio from two transmitters is recorded into one channel.
- Stereo (S): with two transmitters, one is assigned to the left channel and the other to the right. A one-transmitter kit needs an additional transmitter for this two-person stereo setup.
Safety Track
Safety Track (Ms) records a backup track 6 dB below the main track, according to DJI. This can preserve a quieter version if a sudden loud sound overwhelms the main recording. Account for the separate tracks when editing in post-production.
Monitor and mute
Connect headphones to the receiver’s 3.5 mm monitor port to listen while recording. DJI says monitor gain can be adjusted in receiver settings. To mute, use the receiver touchscreen or double-press the transmitter’s mute button; the transmitter indicator pulses red while muted.
Rank #4
- Crystal-Clear Audio Makes You Sound Like a Pro - This wireless microphone delivers high-quality audio with brighter, clearer, and more enjoyable vocal recording, making it ideal for interviews, vlogs, and much more.
- Ready When You Are - The transmitters and receiver are pre-linked and ready to go, letting you easily save time and improve efficiency. Features USB-C and Lightning adapters for more scenarios.
- No More Worrying About Lost Audio - This wireless lavalier microphone's transmitters can each be used as standalone recorders with up to 14 hours of internal recording [4]. And 32-bit float ensures clear audio even if audio levels spike.
- Less Noise, Better Vocals - Intelligent noise cancelling of wireless lavalier microphone makes vocals more clear, even when conducting interviews or shooting videos in locations with erratic and unpredictable sounds
- Extended Range, Expanded Possibilities - Experience stable wireless audio recording within a 250-meter range (FCC) [6], microphone for iphone allowing you to shoot and record more flexibly in more scenarios
Record a backup on the transmitter
The transmitter can record internally without the receiver connected. DJI specifies up to 5.5 hours of standalone recording on a full charge, or up to 14 hours with a constant power supply. These are manufacturer specifications, not independent test results. DJI also specifies 24-bit lossless audio, 8 GB of built-in storage, and files saved in 30-minute segments. The transmitter does not accept an external SD card.
Free tools Windows power users keep installed
One-click scans. No signup required.
When storage is full, new audio replaces the earliest recordings. To keep or manage files, connect the transmitter to a computer over USB to export or delete recordings. DJI also says the receiver can format the transmitter’s storage. Do not rely on the internal recording as your only copy if you need to preserve earlier takes.
Best Value
- Small but Mighty - The DJI Mic Mini lavalier microphone transmitter is small and ultralight, weighing only 10 g, [1] making it comfortable to wear, discreet, and aesthetically pleasing on-camera.
- Detail-Rich Sound - Mic Mini wireless lavalier microphones delivers high-quality audio. A 400m max transmission range [2] ensures stable recording, even in bustling outdoor environments like a busy street. 48kHz sampling & 120 dB SPL for rich, distortion-free audio, approx. 10h battery life [5].
- Record Longer - A transmitter and a receiver offer a maximum operating time of 10 hours, [5] respectively. That's enough time for high-usage scenarios like interviews.
- DJI Ecosystem Direct Connection - With DJI OsmoAudio, a transmitter can connect to Osmo Nano, Osmo 360, Osmo Mobile 7P, Osmo Action 5 Pro, Osmo Action 4, or Osmo Pocket 3 without a receiver, delivering premium audio.
- Powerful Noise Cancelling - 2 noise cancellation levels are available—Basic is ideal for quiet indoor settings, while Strong excels in noisy environments to give you clear vocals. [8]
Troubleshoot a silent or weak recording
- No signal on a camera: reseat the 3.5 mm cable at both ends and verify it runs from the receiver output to the camera’s microphone input.
- Signal is very quiet: check transmitter gain, receiver gain, and the camera’s recording level. One or more may be set too low.
- Phone recording does not use the mic: verify that the adapter matches the phone’s connector, is fully inserted into the receiver, and that the recording app is using the external input.
- Computer recording is silent: select the receiver or microphone input in both the operating system and recording software; confirm the connection type suits the computer’s port.
- No link between transmitter and receiver: relink them using the receiver’s Settings > Link controls and confirm solid green indicators.
- One channel is missing or arranged unexpectedly: check whether Mono or Stereo is selected and whether your phone adapter, camera, or recording app supports the desired channel layout.
For model-specific instructions and device compatibility, use DJI’s download center. Camera input behavior can also depend on the camera’s own jack and settings.
Quick Recap
Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon at the time of purchase will apply.
