Use OBS Studio on a computer connected to your JioFiber gateway, add the prerecorded video as a looping Media Source, and send it to YouTube Live with the stream URL and private stream key. For the best chance of a stable local stream, use Ethernet where practical, set a bitrate your measured upload connection can sustain, and monitor YouTube’s stream health. This setup can loop the video, but it cannot prevent interruptions caused by power, home networking, JioFiber, the encoder, or YouTube’s ingest service.
What you need before you start
- A YouTube channel with live streaming enabled. Enabling a channel’s first live stream can take up to 24 hours, according to YouTube’s encoder setup guidance.
- A computer running OBS Studio, the video file you want to broadcast, and a stable connection to your JioFiber gateway.
- A YouTube Live stream created or scheduled in Live Control Room, which provides the stream URL and private stream key for the encoder.
JioFiber plans and conditions vary, and no universal plan-specific upload speed or reliability figure is established here. Measure the upload speed where the computer will run, then choose a stream bitrate that leaves room for other household traffic.
As an Amazon Associate I earn from qualifying purchases.
Set up OBS to loop a prerecorded video
- Enable YouTube Live and prepare the broadcast. Open YouTube Live Control Room and create or schedule an encoder stream. Copy its server URL and stream key. If this is the channel’s first live stream, allow up to 24 hours for activation.
- Create a scene and add the video. In OBS, create a scene, select the plus button under Sources, choose Media Source, and add the local video file. Enable Loop in the source properties so the file starts again when it reaches the end. OBS documents this setting in its Media Sources guide.
- For a playlist, use the VLC source. OBS’s VLC Video source supports a Loop Playlist option and requires VLC to be installed. Use this instead of a single Media Source when you need a sequence of files to repeat.
- Configure video and output settings. In OBS, set the resolution and frame rate under Settings > Video, and configure the encoder, bitrate, and keyframe interval under Settings > Output (the exact controls depend on the selected output mode and encoder). Choose settings the computer can encode reliably and the connection can sustain. YouTube recommends CBR, a two-second keyframe interval (no more than four seconds), and RTMPS for encrypted delivery. Follow YouTube’s current live encoder settings for supported resolution, frame rate, and bitrate combinations.
- Connect OBS to YouTube. In OBS, open Settings > Stream, select YouTube or the appropriate service option, and enter the stream URL and key if OBS prompts for them. Treat the key like a password: anyone who obtains it may be able to send a feed to your channel. If it is exposed, reset it in Live Control Room.
- Prefer a wired connection when practical. Connect the computer by Ethernet to a LAN port on the JioFiber home gateway. Jio’s gateway instructions identify the LAN port for wired devices. Ethernet can make the local link more predictable than Wi-Fi, but it does not prevent power outages or failures elsewhere between your home and YouTube. Use a cable long enough to reach without strain; a cable alone cannot fix an unstable ISP path.
- Start a controlled test before relying on it. In Live Control Room, check the preview and stream health, and verify the picture and audio. YouTube recommends configuring an encoder at least two hours before an event and starting at least 15 minutes beforehand; its guidance also calls for monitoring quality and testing failover where available. Check that any local recording you intend to keep is being written and growing as expected.
Choose a bitrate that fits JioFiber’s actual upload
The relevant connection speed is upload, not download. YouTube recommends leaving about 20% of upload capacity above the total stream bitrate. For example, if your measured upload is 10 Mbps at the time you plan to stream, a bitrate around 8 Mbps would leave roughly that recommended margin; household traffic or an unstable connection can still reduce the available capacity.
The Tool Desk
Outbyte Driver Updater FREEFix the driver behind crashes, sound loss and screen glitchesFind Drivers →Outbyte PC Repair FREEClear out junk files and repair common Windows errorsFree Scan →Use YouTube’s encoder recommendations for your chosen resolution and frame rate, then test with realistic movement and audio. A static image may not reveal encoding or upload problems that appear with more demanding footage. If the stream health degrades or OBS reports dropped frames, lower the bitrate or resolution and test again rather than assuming the JioFiber plan’s advertised speed is available continuously.
#1 Best Overall
- 【1080P 60FPS Video Capture Card】 This HDMI game capture card is based on USB3.0 high speed transmission port, input resolution up to 4K@30HZ, output resolution up to 2K@30Hz or 1920×1080@60Hz. Type c and USB interface can meet most of the devices in daily life. Easily meet the online capture, real-time recording, online meetings, live gaming and other functions, so you have a better visual enjoyment. Note: For capture use only; requires capture software to function and is not intended for direct screen casting to a monitor or TV
- 【Ultra Low Latency Screen Sharing】 HDMI capture card is made of good quality aluminum alloy with strong heat dissipation, allowing you to enjoy ultra low latency while live gaming or video recording or live streaming, avoiding blue screens and lag. This HDMI to USBC capture card supports easy recording of good quality audio or HD video and transferring it to your computer or streaming platform, allowing you to record 60 fps HD video directly on your hard drive and real-time preview
- 【Plug and Play, Easy to Carry】 This HDMI 1080P video capture card does not require any additional drivers or external power supply, just plug and play for fast capture. The capture card is small and lightweight, so you can put it in your bag for emergencies, making it very portable for outdoor live streaming. It's also a great way to share content in game recording, video conference, video recorder and online teaching
- 【Wide Compatibility USB Capture Card】 Easily streams to Facebook, Youtube or Twitch. With the connection, this HDMI to USB C/3.0 video capture devices can be working on several Operating Systems and various software: Windows 7/ 8/ 10, Mac OS or above, Linux, Android, Laptop, Xbox One, PS3/PS4/PS5, Camera, DVDs, Set Top Box, Webcame, DSLR, Switch/Switch 2, TV BOX, HDTV, Potplayer/VLC, ZOOM, OBS Studio etc.
- 【Package Content & Note】 1x HD Audio Capture Card , 1x USB 3.0 to USB C Adapter (A-side 3.0, B-side 2.0), 1x user manual. Please note that you need to restart the OBS Studio software after the audio setup is complete, otherwise it will result in no sound output. When using an adapter, if the device is recognized as USB 2.0, try using the other side with the USB-C port. Simply flip the capture card and reconnect it to be recognized as USB 3.0
Monitor the stream and diagnose interruptions
Watch YouTube’s stream health in Live Control Room and OBS’s dropped-frame statistics while the broadcast runs. OBS says dropped frames can indicate that the connection to the remote ingest server is unstable or cannot keep up with the configured bitrate. Causes can include the modem or router, Ethernet cable, network card, another device using the network, or ISP-side conditions.
- Dropped frames or unhealthy stream: Check whether other devices are using upload capacity. Reduce bitrate if capacity is insufficient. If the connection remains unstable, test local network hardware and contact the ISP if the problem appears upstream.
- OBS disconnects but the file keeps looping: Looping controls only the local media source. It does not restart OBS, restore the internet path, or guarantee that YouTube reconnects. Test recovery on the actual setup and arrange monitoring or alerts if unattended operation matters.
- Video stops at the end of the file: Reopen the Media Source properties and confirm Loop is enabled. For multiple files, verify the VLC source playlist and its Loop Playlist setting.
- YouTube does not receive a feed: Confirm the correct stream is active in Live Control Room and that OBS has the matching stream URL and key. If the key may have been exposed or changed, reset it in Live Control Room and update OBS.
- Audio or picture problems: Check OBS’s preview and audio meters, the source’s audio settings, and YouTube stream health. Test again with the same resolution, frame rate, bitrate, and representative content you intend to use live.
A router reboot, cable replacement, or bitrate reduction may help in a particular case, but none is a guaranteed fix for a failure outside the local setup. A looping source is not an automatic-recovery system.
Rank #2
- 【1080P HD High Quality】Capture resolution up to 1080p for video source and it is ideal for all HDMI devices such as PS4, PS3, Xbox One, Xbox 360, Wii U, DVDs, DSLR, Camera, Security Camera and set top box. Note: Video input supports 4K30/60Hz and 1080p120/144Hz. Does not support 4K120Hz/144Hz. Output supports up to 2K30Hz.
- 【Plug and Play】No driver or external power supply required, true PnP. Once plugged in, the device is identified automatically as a webcam. Detect input and adjust output automatically. Won't occupy CPU, optional audio capture. No freeze with correct setting.
- 【Compatible with Multiple Systems】suitable for Windows and Mac OS. High speed USB 3.0 technology and superior low latency technology makes it easier for you to transmit live streaming to Twitch, Youtube, Facebook, Twitter, OBS, Potplayer and VLC.
- 【HDMI LOOP-OUT】Based on the high-speed USB 3.0 technology, it can capture one single channel HD HDMI video signal. There is no delay when you are playing game live.
- 【Support Mic-in for Commentary】Rybozen capture card has microphone input and you can use it to add external commentary when playing a game. Please note: it only accepts 3.5mm TRS standard microphone headset.
Plan for long broadcasts and YouTube rules
YouTube’s encoder setup guidance says streams under 12 hours are automatically archived. Treat that as an archive threshold, not a promise of unlimited runtime. If a complete archive matters, plan around the documented behavior and check current Live Control Room guidance before a long broadcast.
Only stream video and audio you have the rights to use. A live broadcast is not exempt from copyright rules. Also, making prerecorded material appear live does not ensure YouTube will approve a channel for monetization: monetization decisions can consider originality and reused content, separately from whether a stream successfully connects. Review YouTube’s current channel monetization policies and copyright guidance before broadcasting material you did not create or license.
Rank #3
- 【4K HDMI Input, 2K@30Hz Recording】Powered by a true USB 3.0 high-speed interface, the capture card supports up to 4K@30Hz HDMI input and records at 2K@30Hz or 1080P@60Hz. Perfect for gamers, streamers, and professionals who need crisp, smooth video for live streaming, gameplay recording, or online meetings.
- 【Ultra Low Latency Screen Sharing】Built with a premium aluminum alloy shell and advanced chipset for stable heat dissipation, ensuring ultra-low latency transmission. Capture high-quality video and dual-channel audio in real time—no lag, no frame drop—ideal for Twitch, YouTube, or OBS streaming.
- 【Easy Plug and Play, Compact & Portable】No driver or external power required—just plug and play via USB 3.0 or Type-C connection to your Windows or macOS computer. Lightweight and compact design makes it easy to carry for outdoor streaming, live shows, or mobile recording setups.
- 【Wide Compatibility & Multi-Device Support】Compatible with Windows 7 8 10 11, macOS, Linux,Android and supports most popular software such as OBS, Zoom, VLC, Twitch Studio, and more. Works seamlessly with PS4, PS5, Xbox, Switch, DSLR cameras, TV boxes, and other HDMI-output devices for streaming to YouTube, Twitch, etc.
- 【What You Get】Includes: HDMI Capture Card, USB 3.0 to USB-C Adapter, User Manual. Tips: Make sure your tablet’s OTG function is enabled before connecting. Test your HDMI device with a monitor first to confirm video and audio output, then connect to the Video Capture Card for recording.
Compare the ways to keep prerecorded video live
| Approach | Computer at home | Home power and broadband | Looping or scheduling | Monitoring and recovery | Cost information established |
|---|---|---|---|---|---|
| StreamNeo cloud service | No; it runs the stream in the cloud. | Not dependent on your home computer or connection staying on during playback. | Uploaded videos and playlists can loop. | Automatic recovery if YouTube drops the stream; StreamNeo team support is included. | One flat price per slot at any uploaded quality up to 4K 60fps; current options are shown below. |
| OBS on a home computer | Yes; the computer and OBS must remain running. | Depends on home electricity, local network, JioFiber service, and the path to YouTube. | OBS Media Source can loop a file; VLC Video source can loop a playlist. | Monitor OBS and YouTube; the sources do not establish a universal automatic-recovery guarantee. | OBS is free software; total operating cost depends on equipment, electricity, and internet service. |
| Gyre cloud service | Not for cloud playback. | Cloud-based operation avoids relying on a home computer for the stream, though account and service details should be checked with the provider. | YouTube lists Gyre as a cloud-based 24/7 prerecorded-video service. | Current scheduling, monitoring, and recovery details are not established here. | Current pricing and service-level details are not established here. |
| AJA HELO Plus dedicated encoder | A dedicated encoder is used instead of relying on a general-purpose OBS computer. | Its network path and any local infrastructure still matter; the reviewed guidance does not establish independence from home broadband or power. | YouTube lists scheduled prerecorded-media playback. | Check current device documentation for control and recovery behavior. | Current total cost is not established here. |
For OBS, YouTube identifies encoder setup and stream key handling in its encoder instructions; encoder options and listed products can change, so check the current Live Control Room information before committing to a long unattended broadcast.
Or let it run in the cloud
StreamNeo is #1 for this use case because it keeps a YouTube prerecorded stream running from the cloud, supports any uploaded quality up to 4K 60fps at one flat price per slot, and gives you a free first day. Upload your video or build a playlist, add your YouTube stream key once, and go live. Your computer does not have to stay on; StreamNeo automatically recovers if YouTube drops the stream. Each slot includes 10 GB of storage, pooled across active slots, and support from the StreamNeo team.
Rank #4
- High-Quality Video Capture, 4K HDMI Capture Card Ready: Capture smooth and vibrant video with this 4K HDMI capture card, engineered for gamers and content creators who demand crisp 1080P 60FPS video quality. Whether you're streaming to Twitch or recording gameplay for YouTube, your footage will look professional and detailed
- Plug-and-Play USB Capture Card, No Drivers Needed: Designed as a USB capture card for streaming, this device works instantly out of the box, just plug into your PC or laptop and start capturing. Fully compatible with popular software like OBS Studio, Streamlabs, and XSplit, making setup quick and stress-free for beginners and pros alike
- Universal Compatibility PS5, Xbox, Switch & More: Stream or record gameplay from virtually any HDMI-enabled device including Nintendo Switch, PS5, Xbox Series X, DSLR cameras, and PCs. The video capture card for gaming supports seamless passthrough so you can play without lag while your audience watches every frame in real time
- Low-Latency Performance for Smooth Streaming: This capture card for streaming minimizes delay between gameplay and broadcast, so you get reliable, low-latency capture that works well for competitive gaming, live broadcasts, and podcast sessions. Suitable for those building their channel with high-quality, engaging content
- Compact & Portable Design for Content Creators: Lightweight and portable, this USB 3.0 capture card works well for creators who travel or switch gaming setups often. Throw it in your bag and stream or record wherever you are, at home, events, LAN parties, streaming or studio sessions
Plans have the same features; only billing length changes: Daily $0.99 per day · Weekly $2.99 per week · Monthly $9.99 per month · 6 months $49.99 for 6 months · Yearly $89.99 a year. The first day is free with no card, one free day per account; cancel any time. UPI and cards are accepted in India, with card checkout worldwide. For five or more slots, contact support.
PC Slower Than It Used to Be?
A free scan shows the junk files, broken settings and background clutter dragging Windows down - then fixes them in one click.Free scan · Windows 10 & 11Outdated Drivers Are Slowing You Down
One free scan finds every outdated or missing driver and matches the right update for your exact hardware.Free scan · exact hardware matchQuick Recap
See StreamNeo for details, or start the free day.
Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon at the time of purchase will apply.
