Recommended: PC Feels Slow? A Free Scan Shows What's Dragging Windows Down →Recommended: Update Every Outdated Driver on Your PC in One Scan - Free →
Special offer. See more information about Outbyte and uninstall instructions. Please review EULA and Privacy policy.
How to fix slow Wi-Fi speeds after upgrading your router starts with finding where the slowdown occurs—not assuming the new router is faulty. Compare a computer connected directly to the modem, a wired connection through the router, and Wi-Fi near the router. Those results can help distinguish an ISP or modem issue from a router, cable, or wireless problem.
1. Find out whether the slowdown is before or after the router
Use the same computer for each test where practical, and compare download and upload results under similar conditions. The FCC explains that speed tests measure both in Mbps and advises contacting your ISP when results are slower than expected: FCC Consumer Guide.
As an Amazon Associate I earn from qualifying purchases.
- Test directly from the modem. Follow your ISP’s instructions for connecting a computer to the modem and for reconnecting the router afterward. If this result is already slow, the problem may be the modem or ISP service rather than Wi-Fi. Ask the ISP about outages or service issues. TP-Link also recommends testing through the modem before blaming the router: TP-Link’s slow-internet troubleshooting guide.
- Test through the router by Ethernet. Connect the computer to a router LAN port with an Ethernet cable and run the test again. If the modem test is good but this wired test is slow, investigate the router’s setup or restart state and the cable between the modem and router.
- Test Wi-Fi near the router. Disconnect Ethernet, connect the same computer to Wi-Fi, and test close to the router with as few walls or other obstructions as possible. If wired performance is good but this result is slow, focus on Wi-Fi conditions, settings, or the device’s wireless capability.
| What you observe | Where to investigate | Next step |
|---|---|---|
| Slow speed directly from the modem | ISP service or modem | Repeat the test as the ISP directs, then ask about service or outage conditions. TP-Link; FCC |
| Modem test is good, but wired speed through the router is slow | Router setup, restart state, or modem-to-router cable | Restart the modem and router, then inspect or swap the connecting cable. TP-Link |
| Wired speed is good, but Wi-Fi is slow near the router | Wireless settings, interference, or device capability | Check the Wi-Fi band, client capability, and model-specific router settings. Google Nest Wifi and Google Wifi Help; TP-Link |
| Wi-Fi is poor mainly in distant rooms | Router placement, barriers, or mesh coverage | Try a more open central router location; if you use mesh, check the point’s placement and link to the router. Google Fiber Help |
2. If the wired router connection is slow, check the link and restart
When the direct-modem result is satisfactory but Ethernet through the router is not, restart the modem and router and retest. Also inspect the Ethernet cable joining them. TP-Link recommends swapping this cable and specifies Cat6 or better: TP-Link troubleshooting guidance. A Cat6 cable is a diagnostic replacement for a potentially faulty or limiting wired link; replacing it is not a general way to boost Wi-Fi.
DriversOutdated Drivers Are Slowing You DownPerformanceWindows Errors? Fix Them Before They SpreadDriversCrashes, No Sound, or Screen Glitches?
Special offer. See more information about Outbyte and uninstall instructions. Please review EULA and Privacy policy.
3. If only Wi-Fi is slow, test the wireless conditions
Run the near-router test with the same device used for the wired comparison. Wi-Fi results can differ because of distance, walls and other building materials, interference, the frequency band in use, and the Wi-Fi capabilities of the client device. Google’s troubleshooting guidance covers these factors: Google Nest Wifi and Google Wifi Help.
#1 Best Overall
Sale
TP-Link Dual-Band BE3600 Wi-Fi 7 Router, Archer BE230 | 4-Stream | 2×2.5G + 3×1G Ports, USB 3.0, 2.0 GHz Quad Core, 4 Antennas | VPN, EasyMesh, HomeShield, MLO, Private IOT
- 𝐅𝐮𝐭𝐮𝐫𝐞-𝐏𝐫𝐨𝐨𝐟 𝐘𝐨𝐮𝐫 𝐇𝐨𝐦𝐞 𝐖𝐢𝐭𝐡 𝐖𝐢-𝐅𝐢 𝟕: Powered by Wi-Fi 7 technology, enjoy faster speeds with Multi-Link Operation, increased reliability with Multi-RUs, and more data capacity with 4K-QAM, delivering enhanced performance for all your devices.
- 𝐁𝐄𝟑𝟔𝟎𝟎 𝐃𝐮𝐚𝐥-𝐁𝐚𝐧𝐝 𝐖𝐢-𝐅𝐢 𝟕 𝐑𝐨𝐮𝐭𝐞𝐫: Delivers up to 2882 Mbps (5 GHz), and 688 Mbps (2.4 GHz) speeds for 4K/8K streaming, AR/VR gaming & more. Dual-band routers do not support 6 GHz. Performance varies by conditions, distance, and obstacles like walls.
- 𝐔𝐧𝐥𝐞𝐚𝐬𝐡 𝐌𝐮𝐥𝐭𝐢-𝐆𝐢𝐠 𝐒𝐩𝐞𝐞𝐝𝐬 𝐰𝐢𝐭𝐡 𝐃𝐮𝐚𝐥 𝟐.𝟓 𝐆𝐛𝐩𝐬 𝐏𝐨𝐫𝐭𝐬 𝐚𝐧𝐝 𝟑×𝟏𝐆𝐛𝐩𝐬 𝐋𝐀𝐍 𝐏𝐨𝐫𝐭𝐬: Maximize Gigabitplus internet with one 2.5G WAN/LAN port, one 2.5 Gbps LAN port, plus three additional 1 Gbps LAN ports. Break the 1G barrier for seamless, high-speed connectivity from the internet to multiple LAN devices for enhanced performance.
- 𝐍𝐞𝐱𝐭-𝐆𝐞𝐧 𝟐.𝟎 𝐆𝐇𝐳 𝐐𝐮𝐚𝐝-𝐂𝐨𝐫𝐞 𝐏𝐫𝐨𝐜𝐞𝐬𝐬𝐨𝐫: Experience power and precision with a state-of-the-art processor that effortlessly manages high throughput. Eliminate lag and enjoy fast connections with minimal latency, even during heavy data transmissions.
- 𝐂𝐨𝐯𝐞𝐫𝐚𝐠𝐞 𝐟𝐨𝐫 𝐄𝐯𝐞𝐫𝐲 𝐂𝐨𝐫𝐧𝐞𝐫 - Covers up to 2,000 sq. ft. for up to 60 devices at a time. 4 internal antennas and beamforming technology focus Wi-Fi signals toward hard-to-reach areas. Seamlessly connect phones, TVs, and gaming consoles.
- Try another Wi-Fi-capable device near the router. If its result differs substantially, the original client’s capabilities or settings may be relevant.
- Check which band the device is using and compare results under consistent conditions. Available bands and controls depend on the router and client.
- For a close-range slowdown, consult the official guide for your router model before changing channel, channel width, Quality of Service (QoS), or parental-control settings. TP-Link lists these among possible checks, but the appropriate choices depend on the model and local wireless environment: TP-Link’s guide.
4. Improve router and mesh placement for weak rooms
If Wi-Fi is acceptable near the router but weak in particular rooms, placement and obstructions are more likely areas to investigate than the internet plan. Put the router in an open, central location rather than on the floor, inside a cabinet, or in a closet. Walls and other building materials can weaken the signal.
For a wireless mesh extender, Google Fiber advises placing it about halfway between the router and the area needing coverage, then checking that it still has a good connection to the router: Google Fiber’s Wi-Fi guidance. An extender placed inside the dead zone may itself have a weak link, so test its connection rather than assuming another mesh point is needed.
Quick Recap
SaleBestseller No. 1
SaleBestseller No. 2
SaleBestseller No. 3
SaleBestseller No. 4
Best Value
Sale
TP-Link AX1800 WiFi 6 Router (Archer AX21 V5) | Dual Band Wireless Internet, Gigabit, Easy Mesh, Works with Alexa - A Certified for Humans Device
- DUAL-BAND WIFI 6 ROUTER: Wi-Fi 6(802.11ax) technology achieves faster speeds, greater capacity and reduced network congestion compared to the previous gen. All WiFi routers require a separate modem. Dual-Band WiFi routers do not support the 6 GHz band.
- AX1800: Enjoy smoother and more stable streaming, gaming, downloading with 1.8 Gbps total bandwidth (up to 1200 Mbps on 5 GHz and up to 574 Mbps on 2.4 GHz). Performance varies by conditions, distance to devices, and obstacles such as walls.
- CONNECT MORE DEVICES: Wi-Fi 6 technology communicates more data to more devices simultaneously using revolutionary OFDMA technology
- EXTENSIVE COVERAGE: Achieve the strong, reliable WiFi coverage with Archer AX1800 as it focuses signal strength to your devices far away using Beamforming technology, 4 high-gain antennas and an advanced front-end module (FEM) chipset
- OUR CYBERSECURITY COMMITMENT: TP-Link is a signatory of the U.S. Cybersecurity and Infrastructure Security Agency’s (CISA) Secure-by-Design pledge. This device is designed, built, and maintained, with advanced security as a core requirement.
Rank #4
Sale
TP-Link Tri-Band BE9300 WiFi 7 Router (Archer BE550) | 6-Stream, Full 2.5G Ports, 6 Internal Antennas, Up to 2,000 sq. ft., EasyMesh Expansion, VPN
- BE9300 Tri-Band Wi-Fi 7 Speeds: Archer BE550 features Multi-Link Operation, Multi-RUs, 4K-QAM, and 320 MHz channels, providing blazing-fast speeds of 5760 Mbps (6 GHz band), 2880 Mbps (5 GHz band), and 574 Mbps (2.4 GHz band).
- Unmatched Performance for Streaming and Gaming: Ensures seamless 4K/8K streaming, engaging AR/VR gaming, and ultra-fast downloads for an optimal user experience.
- Extend Your Coverage with EasyMesh: Add EasyMesh-compatible routers, range extenders, and wireless powerline adapters to form a seamless whole-home network that eliminates dead zones while reducing signal drops and lag when moving throughout your home.
- Full 2.5G WAN & LAN Ports for Future-Proof Networking: Archer BE550 is equipped with one 2.5G WAN port and four 2.5G LAN ports, enabling peak device performance and offering an ideal solution for future-proofing your home network.
- Enhanced Experience with Premium Components: Our proprietary Wi-Fi optimization technology, combined with six strategically positioned antennas and Beamforming, ensures higher capacity, stronger and more reliable connections, and reduced interference.
Rank #3
Sale
TP-Link Tri-Band BE9700 WiFi 7 Router (Archer BE600) | 10G Port, 2.5G Port, 3× 2.5G LAN, 320MHz Channel, Covers up to 2,600 sq. ft., 120 Devices, VPN, HomeShield Security
- 𝐍𝐞𝐱𝐭-𝐆𝐞𝐧 𝐖𝐢-𝐅𝐢 𝟕 - Optimize performance on latest WiFi 7 laptops and devices, like the iPhone 16 Pro, Samsung Galaxy S24 Ultra, and PS5 Pro with the latest WiFi 7 technology with Multi-Link Operation, Multi-RUs, 4K-QAM, and up to 320 MHz channels.◇△
- 𝟕-𝐒𝐭𝐫𝐞𝐚𝐦, 𝐁𝐄𝟗𝟕𝟎𝟎 𝐓𝐫𝐢-𝐁𝐚𝐧𝐝 𝐖𝐢-𝐅𝐢 𝟕 𝐒𝐩𝐞𝐞𝐝𝐬 - Delivers smooth 4K/8K streaming, immersive AR/VR gaming, and blazing-fast downloads with speeds up to 5,765 Mbps on the 6 GHz band, 2,882 Mbps on the 5 GHz band, and 1,032 Mbps on the 2.4 GHz band.⌂
- 𝐌𝐚𝐱𝐢𝐦𝐢𝐳𝐞𝐝 𝐂𝐨𝐯𝐞𝐫𝐚𝐠𝐞 - Up to 2,600 sq. ft. coverage for up to 120 devices at a time. 6 optimally positioned antennas and Beamforming technology focus Wi-Fi signals toward hard-to-cover areas for stronger coverage-—ideal for those seeking the best WiFi router for large homes.
- 𝟏𝟎 𝐆𝐛𝐩𝐬 𝐏𝐨𝐫𝐭 𝐟𝐨𝐫 𝐌𝐮𝐥𝐭𝐢-𝐆𝐢𝐠𝐚𝐛𝐢𝐭 𝐂𝐨𝐧𝐧𝐞𝐜𝐭𝐢𝐯𝐢𝐭𝐲 - Features 1x 10 Gbps WAN/LAN port, 1x 2.5 Gbps WAN/LAN port, and 3x 2.5 Gbps LAN ports. Integrate with a multi-gig modem for fast, wired gig+ internet.
- 𝐎𝐮𝐫 𝐂𝐲𝐛𝐞𝐫𝐬𝐞𝐜𝐮𝐫𝐢𝐭𝐲 𝐂𝐨𝐦𝐦𝐢𝐭𝐦𝐞𝐧𝐭 - TP-Link is a signatory of the U.S. Cybersecurity and Infrastructure Security Agency’s (CISA) Secure-by-Design pledge. This device is designed, built, and maintained, with advanced security as a core requirement.
Rank #2
Sale
TP-Link BE6500 Dual-Band WiFi 7 Router (BE400) | Dual 2.5Gbps Ports, USB 3.0, Covers up to 2,400 sq. ft., 90 Devices, Quad-Core CPU, HomeShield, Private IoT
- 𝐅𝐮𝐭𝐮𝐫𝐞-𝐑𝐞𝐚𝐝𝐲 𝐖𝐢-𝐅𝐢 𝟕 - Designed with the latest Wi-Fi 7 technology, featuring Multi-Link Operation (MLO), Multi-RUs, and 4K-QAM. Achieve optimized performance on latest WiFi 7 laptops and devices, like the iPhone 16 Pro, and Samsung Galaxy S24 Ultra.
- 𝟔-𝐒𝐭𝐫𝐞𝐚𝐦, 𝐃𝐮𝐚𝐥-𝐁𝐚𝐧𝐝 𝐖𝐢-𝐅𝐢 𝐰𝐢𝐭𝐡 𝟔.𝟓 𝐆𝐛𝐩𝐬 𝐓𝐨𝐭𝐚𝐥 𝐁𝐚𝐧𝐝𝐰𝐢𝐝𝐭𝐡 - Achieve full speeds of up to 5764 Mbps on the 5GHz band and 688 Mbps on the 2.4 GHz band with 6 streams. Enjoy seamless 4K/8K streaming, AR/VR gaming, and incredibly fast downloads/uploads.
- 𝐖𝐢𝐝𝐞 𝐂𝐨𝐯𝐞𝐫𝐚𝐠𝐞 𝐰𝐢𝐭𝐡 𝐒𝐭𝐫𝐨𝐧𝐠 𝐂𝐨𝐧𝐧𝐞𝐜𝐭𝐢𝐨𝐧 - Get up to 2,400 sq. ft. max coverage for up to 90 devices at a time. 6x high performance antennas and Beamforming technology, ensures reliable connections for remote workers, gamers, students, and more.
- 𝐔𝐥𝐭𝐫𝐚-𝐅𝐚𝐬𝐭 𝟐.𝟓 𝐆𝐛𝐩𝐬 𝐖𝐢𝐫𝐞𝐝 𝐏𝐞𝐫𝐟𝐨𝐫𝐦𝐚𝐧𝐜𝐞 - 1x 2.5 Gbps WAN/LAN port, 1x 2.5 Gbps LAN port and 3x 1 Gbps LAN ports offer high-speed data transmissions.³ Integrate with a multi-gig modem for gigplus internet.
- 𝐎𝐮𝐫 𝐂𝐲𝐛𝐞𝐫𝐬𝐞𝐜𝐮𝐫𝐢𝐭𝐲 𝐂𝐨𝐦𝐦𝐢𝐭𝐦𝐞𝐧𝐭 - TP-Link is a signatory of the U.S. Cybersecurity and Infrastructure Security Agency’s (CISA) Secure-by-Design pledge. This device is designed, built, and maintained, with advanced security as a core requirement.
5. Retest before changing more settings or contacting support
- Restart the network, then repeat the modem, wired-router, or Wi-Fi test that exposed the problem.
- Keep the device and test conditions as similar as possible so the comparison is useful.
- If the direct-modem result remains below what you expect, contact the ISP and ask about service conditions or outages. The FCC recommends contacting the provider about low measured speeds: FCC Consumer Guide.
- If the modem result is good but a wired or wireless test remains poor, use the router manufacturer’s official instructions for your model and the specific connection path that failed.
Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon at the time of purchase will apply.
Do these 3 things before closing this tab:
1Fix the driver behind crashes, sound loss and screen glitches2Clear out junk files and repair common Windows errors3Scan for outdated or missing drivers - takes under a minuteSpecial offer. See more information about Outbyte and uninstall instructions. Please review EULA and Privacy policy.
