To enable DLSS, open a supported PC game’s graphics or display settings, switch on its DLSS option, and choose a mode. Start with Quality when image detail matters most; try Balanced or Performance if you need more performance headroom. The exact controls depend on the game, and the best mode depends on your output resolution, GPU, and preferences.
How to enable DLSS
- Check support for the specific DLSS feature. A game may support one DLSS feature without supporting every other feature, and your GPU generation must also be compatible with the feature you want.
- Open the game’s graphics or display settings. Look for an upscaling, anti-aliasing, or image-quality section. Menu names and locations vary by game.
- Turn on the DLSS option the game provides. NVIDIA says DLSS is normally enabled through in-game settings, and available controls can depend on the game engine and how recently the game was updated. See NVIDIA’s in-game DLSS settings guidance.
- Select a mode, apply the change, and compare in-game. Use the same scene and output resolution when comparing modes so you can judge image quality and performance consistently.
DLSS Super Resolution uses lower-resolution input along with motion data and feedback from prior frames to reconstruct a higher-resolution image, according to NVIDIA’s DLSS overview. It is an upscaling feature; do not assume that enabling it also enables Frame Generation or another DLSS feature.
As an Amazon Associate I earn from qualifying purchases.
Which DLSS quality mode should you use?
Modes trade input resolution against performance and reconstructed image quality. NVIDIA’s documented examples for DLSS Super Resolution overrides give the following input-resolution percentages; they describe NVIDIA’s override guidance, not a guarantee that every game implements each mode identically.
What’s actually slowing this PC down?
Pick the symptom - the matching free tool is one click away.
| Mode | NVIDIA input-resolution example | When to consider it |
|---|---|---|
| Quality | 67% | Start here when preserving image detail is the priority. |
| Performance | 50% | Try it when you want more performance headroom and can accept a more aggressive upscale. |
| Ultra Performance | 33% | Consider it only when you need a substantial performance-oriented reduction in input resolution. |
| Balanced | Not stated in NVIDIA’s cited override guidance | Try the game’s Balanced option if available, then compare it directly with Quality and Performance. |
NVIDIA also documents custom scaling from 33% to 100% in its override guidance. See NVIDIA’s NVIDIA App feature guidance. The examples do not establish a universal best mode or a universal Balanced percentage. Results vary with output resolution, game implementation, GPU, and personal preference.
#1 Best Overall
- AI Performance: 767 AI TOPS
- OC mode: 2632 MHz (OC mode)/ 2602 MHz (Default mode)
- Powered by the NVIDIA Blackwell architecture and DLSS 4
- Axial-tech fan design features a smaller fan hub that facilitates longer blades and a barrier ring that increases downward air pressure
- A 2.5-slot design maximizes compatibility and cooling efficiency for superior performance in small chassis
How to compare modes fairly
- Keep the output resolution and graphics settings unchanged while switching modes.
- Compare the same scene, paying attention to fine detail and image stability as well as performance.
- Choose the mode that best fits your priorities in that game; a setting that looks good at one output resolution may not be your preference at another.
What if the game does not show a DLSS option?
First confirm that the game supports the specific DLSS feature and that the game is up to date. Then check your GPU against NVIDIA’s feature-by-generation table. NVIDIA’s compatibility information lists Super Resolution for GeForce RTX 20, 30, 40, and 50 Series, while some other DLSS features are restricted to particular generations. “DLSS support” therefore does not mean every feature is available on every RTX card.
If the title is compatible, NVIDIA App may offer per-game DLSS overrides. In the app, open Graphics > Program Settings > Driver Settings and review the DLSS override controls for that game. Some overrides require the related feature to be enabled in the game first, and availability depends on compatibility. NVIDIA describes these controls in its NVIDIA App feature guidance.
Quick Recap
Rank #4
- Powered by the NVIDIA Blackwell architecture and DLSS 4. System Requirements: Minimum 850W PSU with 16-pin 12V-2x6 (12VHPWR) connector required. Verify before purchasing.
- Military-grade components deliver rock-solid power and longer lifespan for ultimate durability. Compatibility: 348mm (13.7") length, 3.6 slots, 4.3 lbs. Confirm case clearance and slot spacing. GPU bracket included.
- Protective PCB coating helps protect against short circuits caused by moisture, dust, or debris
- 3.6-slot design with massive fin array optimized for airflow from three Axial-tech fans
- Phase-change GPU thermal pad helps ensure optimal thermal performance and longevity, outlasting traditional thermal paste for graphics cards under heavy loads
Rank #3
- Powered by the NVIDIA Blackwell architecture and DLSS 4
- Powered by GeForce RTX 5060
- Integrated with 8GB GDDR7 128bit memory interface
- PCIe 5.0
- WINDFORCE cooling system
Rank #2
- Powered by the NVIDIA Blackwell architecture and DLSS 4
- Powered by GeForce RTX 5070 Ti
- Integrated with 16GB GDDR7 256bit memory interface
- PCIe 5.0
- WINDFORCE cooling system
Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon at the time of purchase will apply.
