For PS5 Pro, start with a 4K TV whose exact model and HDMI input support 4K at 120 Hz if you want access to compatible games’ high-frame-rate modes. Then check VRR and ALLM if you want those features. A 4K label by itself does not confirm any of them: support can vary by model, regional version and port. You do not need to buy a new HDMI cable automatically; PlayStation recommends the cable included with the console.
What TV do you need for PS5 Pro?
A 4K TV is the sensible starting point for a PS5 Pro setup. To use the console’s 4K-at-120-Hz output, the TV must accept that signal on the HDMI input you plan to use. If you want variable refresh rate (VRR) or automatic low-latency mode (ALLM), check those features separately for the same model and input. The console, game, TV, port and connection all matter; a feature listed somewhere in a TV’s marketing does not prove that every input supports it.
As an Amazon Associate I earn from qualifying purchases.
PlayStation describes PS5 Pro as capable of running compatible games at 60 fps or up to 120 fps with ray tracing and AI-enhanced 4K resolution using PSSR. That is a capability for compatible games, not a promise that every title runs at 120 fps or combines every feature in the same way. A TV that accepts 4K/120 Hz gives you access to that class of output when the game and console support it; it cannot make a game render at a frame rate the game does not offer.
Do these 3 things before closing this tab:
1Repair Windows errors before they cause bigger problems2Scan for outdated or missing drivers - takes under a minute3Clear out junk files and repair common Windows errorsIn practice, make the purchase decision in this order:
#1 Best Overall
- 4K UltraHD Resolution: Experience incredible detail with 4X the resolution of 1080p Full HDTVs
- QLED (Quantum Dot Technology): Rich, vibrant colors covering nearly the entire DCI-P3 color space to bring images to lifeQLED – Quantum Dot Technology: Rich, vibrant colors covering nearly the entire DCI-P3 color space to bring images to life
- 120Hz Panel Refresh Rate: Watch action-packed movies, fast-paced video games, and live sports with an ultra-smooth viewing experience, free of motion blur
- TCL AIPQ Pro Processor: Powerful, advanced processor that intelligently optimizes the color, contrast, and clarity for an unrivaled 4K HDR experience
- Dolby Atmos Audio: Advanced spatial audio processing can be found in movies, TV shows, and video games
- Confirm the exact model supports 4K at 120 Hz. Check the product’s precise model number and the manual’s input table, not only the series name or the retailer’s headline.
- Identify which HDMI input supports it. The intended port may be only one of several, and connecting to a different input can prevent the expected signal.
- Check VRR and ALLM separately. Their availability may differ from 4K/120-Hz support and may depend on a TV setting or specific input.
- Assess picture quality and room fit. Compare model-specific information about HDR, brightness, reflections, contrast and viewing angle. The compatibility facts alone do not establish which TV looks best.
- Confirm your connection plan. Consider whether a soundbar or receiver will sit between the console and TV, and whether the desired features remain available through that setup.
PlayStation’s documentation says the PS5 console supports HDMI 2.1 specifications and 4K 120-Hz video output. That does not mean that a TV’s “HDMI 2.1” label alone is enough to select a set: verify the required signal, VRR and other features for the specific port and TV model.
Do you need a 120 Hz TV for PS5 Pro?
No—not to play PS5 Pro games generally. A 120-Hz-capable TV is needed if you want the TV to accept 120-Hz output at 4K, which is useful for compatible games and modes. Without it, you can still use the console with a suitable 4K display, but you should not expect to access 4K/120-Hz output through a TV input that does not support it.
The distinction is between what the console can output and what a particular game offers. PlayStation’s “up to 120 fps” wording is explicitly about compatible games. A game may offer a mode with a higher frame rate, a different resolution or other visual settings; the TV does not choose the game’s mode for you. Check the game’s own display or graphics options when you are setting expectations for a particular title.
What’s actually slowing this PC down?
Pick the symptom - the matching free tool is one click away.
A 120-Hz specification also needs to describe the input signal, not merely a panel or motion-processing feature. For this purchase, look for explicit confirmation that the exact TV accepts 4K at 120 Hz over HDMI on the port you will use. If documentation lists a feature by input, follow that table. If the listing is ambiguous, do not treat a general “120 Hz” phrase as proof of 4K/120-Hz compatibility.
When a 4K/120-Hz TV is a priority
- You want the option to use compatible games’ high-frame-rate modes at 4K.
- You want a TV that can accept the PS5 Pro’s supported 4K/120-Hz output rather than limiting the console to a lower refresh-rate input mode.
- You are choosing a display for more than one device and want the relevant 4K/120-Hz inputs available for your planned connections.
When it may not be your deciding feature
- You mainly play titles that do not offer a 120-fps mode, or you do not expect to use such a mode.
- Your budget or room requirements make other verified qualities more important to you. The feature checklist establishes compatibility, not the value or picture-quality ranking of competing sets.
- You are considering an 8K TV specifically because of PS5 Pro. 8K is not required for this 4K buying decision; PlayStation lists 8K support for select games, while its compatibility guidance lists system output up to 4K. The 8K path has its own display requirements and trade-offs.
Does PS5 Pro support 4K at 120 Hz?
Yes. PlayStation says the PS5 console supports 4K 120-Hz video output, and its PS5 Pro product description says compatible games can be played at up to 120 fps with 4K output, ray tracing and PSSR. These statements describe supported output and game capabilities, not a universal promise about every game, TV or connection.
Rank #2
- 4K UltraHD Resolution: Experience incredible detail with 4X the resolution of 1080p Full HDTVs
- QLED (Quantum Dot Technology): Rich, vibrant colors covering nearly the entire DCI-P3 color space to bring images to lifeQLED – Quantum Dot Technology: Rich, vibrant colors covering nearly the entire DCI-P3 color space to bring images to life
- 144Hz Panel Refresh Rate: Watch action-packed movies, fast-paced video games, and live sports with an ultra-smooth viewing experience, free of motion blur
- TCL AIPQ Pro Processor: Powerful, advanced processor that intelligently optimizes the color, contrast, and clarity for an unrivaled 4K HDR experience
- Dolby Atmos Audio: Advanced spatial audio processing can be found in movies, TV shows, and video games.
Keep three separate questions in mind when checking a particular setup:
- Can the console output the signal? PlayStation says it can support 4K/120-Hz video output.
- Does the TV accept that signal? The exact model and HDMI input must support it.
- Does the game use a mode that benefits from it? The game must support the relevant high-frame-rate option.
If any part of that chain does not support the intended mode, the result may be a lower refresh rate or another available output. For that reason, a console capability should not be read as a guarantee about a particular game’s frame rate or a TV’s compatibility.
Do you need HDMI 2.1 for PS5 Pro?
Use the feature specification, not the label alone, as your buying test. PlayStation states that the PS5 console supports HDMI 2.1 specifications and 4K 120-Hz output. For a TV purchase, verify that the exact input accepts 4K/120 Hz and that it supports any additional features you care about. A broad HDMI label does not by itself establish support for every signal or feature on every input.
Read the TV’s manual or official model specifications and look for an input-by-input table. Confirm the port’s support for 4K/120 Hz, VRR and ALLM rather than assuming all ports match. This matters especially if the TV will also be connected to a soundbar or receiver: plan which device uses which input and check whether the intervening equipment preserves the signal features you intend to use. If the manufacturer’s documentation does not make the arrangement clear, treat that as an unresolved compatibility question rather than assuming the feature works through every connection path.
When comparing two TVs, use the complete model number, including any regional suffix where applicable. A manufacturer may group sets under a series name even though support varies between series or regional variants. Sony’s listed 2025 series chart illustrates the point: BRAVIA 5 (XR50) and BRAVIA 8 II (XR80M2) are marked for 4K/120 Hz, VRR and ALLM, while BRAVIA 3 (S30) and BRAVIA 2 II (S20M2) are not marked for 4K/120 Hz or VRR. That is an example from Sony’s chart, not a ranking of all TVs or a guarantee for every regional SKU; verify the exact model you are buying.
Rank #3
- HI-QLED COLOR: Experience a visual treat with Hi-QLED Color. Every frame is rich, vibrant, and true-to-life, ensuring that every shade, from soft pastels to bold and striking tones, stands out in stunning clarity
- TOTAL HDR SOLUTION: See every basket and goal in all its glory. Total HDR Solution distinguishes between the colors you perceive on screen. That means ink-black blacks, not muddled tones and brighter, more vibrant colors with every HDR format, including Dolby Vision, HDR 10+Adaptive, HDR 10 and HLG
- DOLBY VISION AND DOLBY ATMOS: The fusion of Dolby Vision HDR imaging and Dolby Atmos sound transforms your TV into an entertainment powerhouse. These image and sound technologies from the cinema, now brought together for the home, provide amazing realism that you’ll see, hear, and feel like never before
- FIRE TV: Fire TV seamlessly integrates your favorite live channels and apps on the home screen, or you can browse the Channel Guide in Live
- PRESS & ASK | ALEXA: Just press and ask Alexa to find, launch, and control your content. Go beyond streaming to check sports scores, set timers, reminders, and more
Should you look for VRR and ALLM?
They are useful additions, but they are separate checks rather than substitutes for 4K/120-Hz support. PlayStation says VRR adjusts the refresh rate in real time when the connected TV and game support it. ALLM allows a supported TV to switch automatically to a low-latency mode for gameplay. The benefit depends on the game and television, and PlayStation notes that results vary by TV.
Free tools Windows power users keep installed
One-click scans. No signup required.
| Feature | What it does | What to verify |
|---|---|---|
| 4K/120 Hz | Allows a compatible TV input to accept 4K video at 120 Hz from the console. | Explicit 4K/120-Hz support for the exact TV model and HDMI input. |
| VRR | Adjusts refresh in real time when the game and connected TV support it. | VRR support for the exact model and port, plus support in the game and the console’s reported display capabilities. |
| ALLM | Lets a supported TV switch automatically to a low-latency mode for gameplay. | ALLM support and any TV setting or connection requirement described in the manual. |
If you are deciding between two models, compare the features you will actually use and the inputs that expose them. Do not treat one checkmark as evidence for the other two. Sony’s 2025 chart, for example, records those features separately, and not all listed series receive the same marks.
How to compare TVs without overpaying for a spec sheet
First establish the minimum compatibility you want: 4K, 4K/120-Hz input support if high-frame-rate modes matter to you, and VRR or ALLM if you want those functions. Then compare TVs on qualities the compatibility list cannot settle. A feature checklist can rule out a set that lacks the input you need; it cannot tell you which screen has better HDR, lower input lag or a better picture in your room.
Separate compatibility from picture quality
Check model-specific information for HDR implementation, brightness, reflection handling, contrast and viewing angle. Those factors affect how the picture suits your room and seating, but the PlayStation and Sony compatibility material discussed here does not provide comparative measurements for them. Do not infer a brightness level, input-lag result or image-quality winner from a 4K/120-Hz logo.
If you rely on independent measurements or reviews to make that comparison, make sure they refer to the same model and regional version you intend to buy. A result for a similarly named model is not automatically transferable. Likewise, a TV’s feature support is not an independent performance test.
Recommended Free Tools
Rank #4
- TCL QM6K QD-MINI LED TV SERIES - AFFORDABLE PREMIUM PERFORMANCE FOR SPORTS, GAMING & STREAMING. Experience superior contrast, rich color, and ultra-smooth motion with TCL’s QD-Mini LED technology. Designed to outperform traditional QLED and OLED TVs, the QM6K is the best TV for every moment—whether you're streaming, gaming, or watching the big game.
- QD-MINI LED. IT’S MINI LED PLUS QLED COLOR - BREATHTAKING BRIGHTNESS AND COLOR IN ANY LIGHT. Combines ultra-precise Mini LEDs with Quantum Dot technology for incredible brightness, bold contrast, and over a billion vibrant colors.
- TCL HALO CONTROL SYSTEM - BETTER BLACKS. SHARPER DETAIL. NO BLOOMING. Advanced local dimming eliminates haloing, enhances shadow detail, and improves picture accuracy—so dark scenes look deeper, and bright scenes stay crisp.
- DOLBY VISION, HDR10+, HDR10 & HLG - STUNNING HDR IN EVERY FORMAT. Enjoy 4K content the way it was meant to be seen. Dynamic HDR support delivers exceptional color, contrast, and detail across all major formats.
- 144HZ NATIVE REFRESH RATE + MOTION RATE 480 - SMOOTH, FAST ACTION—PERFECT FOR LIVE SPORTS. Watch fast-paced action with incredible clarity and minimal motion blur—making this one of the best TVs for sports.
Count usable inputs, not just total inputs
Write down what you will connect: PS5 Pro, any other console or source, and any soundbar or receiver in the signal path. Then use the manual to identify which ports support the gaming features you want. A TV can have multiple HDMI inputs without every input supporting the same capabilities. If two devices both need a particular feature, check whether you have enough suitable inputs and whether your audio setup changes the connection route.
Fit the screen to the room and budget
Compare local prices, size and dimensions using current manufacturer or retailer listings, then consider your viewing distance, room layout and available space. Those values change by model, seller and market, so a generic recommendation cannot substitute for checking the actual listing. Keep compatibility and room fit as separate decisions: a TV can meet the console’s signal requirements and still be the wrong size or a poor match for your room.
Use a shortlisting table
For each candidate, record facts from the exact model’s documentation. Leave a point unresolved if the manufacturer does not establish it; do not fill the gap with a guess.
| Check | Candidate A | Candidate B | Why it matters |
|---|---|---|---|
| Exact model and regional version | Record from listing/manual | Record from listing/manual | Series names may cover variants; verify the precise SKU. |
| 4K/120-Hz HDMI input | Port number and confirmation | Port number and confirmation | Required for the intended 4K/120-Hz connection. |
| VRR | Support and any port/setting caveat | Support and any port/setting caveat | Separate feature; it depends on TV and game support. |
| ALLM | Support and any setting caveat | Support and any setting caveat | Separate feature for automatic low-latency switching. |
| HDR and room-specific picture needs | Use model-specific evidence | Use model-specific evidence | Compatibility alone does not rank image quality. |
| Suitable inputs left for other devices | Count after setup plan | Count after setup plan | Sound or source equipment can affect which ports are available. |
| Local price, size and dimensions | Check current local listing | Check current local listing | These vary by seller, market and model. |
How to verify PS5 Pro’s display features after connecting the TV
The console automatically detects display capabilities and selects the best available resolution, according to PlayStation’s resolution guidance. You can inspect the connected HDMI device’s reported capabilities in the console’s Video Output settings, including resolution, VRR and HDR support. The console also offers settings for 120-Hz output, VRR, ALLM, HDR and video transfer rate.
The Tool Desk
Outbyte Driver Updater FREEScan for outdated or missing drivers - takes under a minuteDriver Scan →Outbyte PC Repair FREEClear out junk files and repair common Windows errorsFree Scan →- Connect the console to the intended TV input. Use the port identified in the TV manual for the features you want. If you use a receiver or another device between console and TV, include it in the compatibility check.
- Open the PS5 Video Output settings. Review the information the console reports for the connected HDMI device, including resolution, VRR and HDR support.
- Check the relevant console options. Review the available settings for 120-Hz output, VRR, ALLM, HDR and video transfer rate. Availability or results depend on what the connected display and game support.
- Test in a compatible game. A display capability does not mean every game uses it. Check the game’s available graphics or display modes to see whether it offers a mode that uses the feature.
If the console does not report the capability you expected, first compare its displayed information with the TV manual’s port table. That tells you whether the mismatch is likely to be the selected input, the TV’s actual feature support or another part of the connection.
Best Value
- MINI LED PROCESSOR 4K: Our advanced processor delivers brighter highlights and deeper blacks,* bringing every detail to life with stunning clarity
- PURE COLOR SPECTRUM: delivers one billion true-to-life colors, powered by advanced color technology and MiniLED precision. Enjoy rich reds, deep blues, and vibrant greens, making every scene leap off the screen with breathtaking realism.
- MINI LED HDR: Experience HDR picture quality with brighter highlights and deeper blacks than traditional HDR TVs.* Enjoy vibrant colors and lifelike details as this technology enhances brightness and contrast, making every image stand out with remarkable depth and realism.
- ENDLESS FREE CONTENT: Watch 2,700+ free streaming options, including 750+ subscription-free channels on Samsung TV Plus. Enjoy news, sports, movies, kids' shows and reality TV — all without a subscription. Discover endless entertainment with new content added regularly, tailored to your mood and interests.*
- SUPREME MINI LED DIMMING: delivers deep contrast and bright highlights for a truly superb picture.*
What to do if 4K/120 Hz is missing
If the TV shows a lower resolution or refresh rate than expected, PlayStation recommends checking the television’s claimed support, firmware, cable, connection route, HDMI port and console video settings. Work through the chain systematically rather than buying accessories first.
- Confirm the exact TV and port. Check the manual for explicit 4K/120-Hz support on the input in use. Move the console to the designated port if necessary.
- Update the TV firmware. Make sure the television is running current firmware, as PlayStation includes this among its troubleshooting checks.
- Check the cable. PlayStation recommends the HDMI cable included with the console. If you need a replacement or another cable, an Ultra High Speed HDMI cable is an alternative; a new cable is not a mandatory purchase for every owner.
- Connect directly where practical. Temporarily connect the console directly to the TV to check whether a receiver or other intermediary is affecting the signal.
- Review the console’s video settings. Check the available Video Output options and the capabilities the console reports from the connected HDMI device.
- Recheck the game and mode. Confirm that the title supports the mode you are trying to use; the console’s output capability does not mean every game offers 120 fps.
If the expected capability still does not appear, compare the exact model number and port specification with the console’s reported display information. Avoid assuming that a TV series name, a general HDMI label or a “4K” description establishes 4K/120-Hz support. PlayStation’s troubleshooting guidance is the appropriate reference for current console-side checks.
Is an 8K TV worth choosing for PS5 Pro?
Not as a prerequisite for this 4K gaming choice. PlayStation identifies 8K support for select games, while its compatibility guidance lists system output up to 4K; the PS5 Pro 8K path has distinct display requirements and trade-offs. If the goal is to get the well-established 4K/120-Hz features available to compatible games, evaluate a 4K display against those requirements rather than assuming you need an 8K set.
Consider 8K only as a separate display decision, after checking the specific game support and requirements that matter to you. An 8K label alone does not establish 4K/120-Hz, VRR or ALLM support on the input you will use. Those remain model- and port-specific checks.
Quick Recap
What not to assume when choosing a PS5 Pro TV
- “4K” means 120 Hz. It does not. Check 4K/120-Hz support for the exact input.
- “120 Hz” means 4K at 120 Hz over HDMI. Look for the full signal specification, not an isolated number.
- Every HDMI port supports the same gaming features. Verify the input table in the manual.
- 4K/120-Hz support proves VRR or ALLM. Check each feature independently.
- PS5 Pro runs every game at 120 fps. PlayStation describes this capability for compatible games, not every title.
- A new cable is always required. PlayStation recommends the cable included with the console.
- An 8K television is necessary. 8K is not a prerequisite for a 4K-focused setup.
- A feature chart identifies the best-looking TV. It shows compatibility, not a comparative picture-quality or input-lag result.
Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon at the time of purchase will apply.
