To charge a HALO Bolt jump starter, use the AC wall adapter supplied for your exact model. Connect the adapter to the Bolt’s charge input, then plug it into a wall outlet; on the models covered by the manuals below, charging starts automatically. The full-charge light and charging time vary by model, so check the model number before relying on a specific indicator or duration.
How to charge a HALO Bolt
- Identify the model. Check the label on the device or its product documentation. HALO power products differ, and these steps apply to the Bolt jump starters described here.
- Use the correct adapter. Use the AC wall adapter supplied with that model, or a replacement HALO explicitly lists as compatible. Connect its tip to the Bolt’s charge input.
- Plug the adapter into the wall. The cited Bolt manuals say charging begins automatically once connected.
- Wait for the model’s full-charge signal. Use the time and indicator in the matching manual; they are not the same across all Bolt models.
Do not mistake the USB output for the charge input: the output charges another device, while the manuals specify the model’s adapter at the input to recharge the Bolt itself. The available instructions do not establish that an arbitrary phone charger, USB cable, or adapter with a similar-looking plug is suitable.
As an Amazon Associate I earn from qualifying purchases.
Charging time and full-charge indicator by model
| HALO Bolt model | Full-charge indication | Time stated in instructions | Source |
|---|---|---|---|
| Bolt Compact | Four solid green battery-indicator lights | Up to 9 hours | HALO Bolt Compact Rev 8 manual |
| Bolt ACDC Wireless | Four solid green lights | Up to 9 hours | Operating instructions hosted by QVC |
| Bolt 57720 | Four solid green lights | Up to 6 hours | Manual copy hosted by Manualshelf |
| Bolt 55500 | Four solid blue lights | 8 hours | Operating instructions hosted by QVC |
| Bolt ACDC 58830 | All four lights solid green | Up to 9 hours | Instructions copy hosted on Amazon’s document CDN |
These are model-specific instructions, not a universal HALO charging-time guarantee. Match the model and, where available, manual revision before relying on an exact figure.
Recommended Free Tools
Can you charge a HALO Bolt in a car?
Some models include a car charger as an alternative when a wall outlet is unavailable. The Bolt ACDC Wireless instructions describe using its supplied car charger on the road, and HALO’s 58830 product page lists a car charger in the package; the 58830 instructions also describe it as an on-road option. Use the car charger supplied for, or specified as compatible with, your model. The cited sources do not establish whether car charging is faster or slower than wall charging.
#1 Best Overall
- REPLACEMENT JUMP STARTER CABLE– these replacement portable mini car jump starter cables are made for the HALO Bolt family of portable car jump starter products
- EASY TO USE – these cables come with easy to follow instructions are simple to connect. These cables are compatible with any standard car battery
- EXCELLENT CUSTOMER SERVICE – HALO is a global leading force that is dedicated to offering an array of consumer electronic products that are innovative, portable, and reliable.
If the original wall adapter is missing or damaged
Choose a replacement by exact model number, not by plug appearance. HALO’s replacement wall adapter page lists compatibility with models 57720, 58830, Wireless 44400, Bolt Air, and Bolt Compact. Check the page and your device documentation to confirm your model is covered before ordering; this compatibility list does not establish support for every HALO Bolt.
Quick Recap
Best Value
- [Support Service] Backed by a 24-month manufacturer warranty
- [Wide Compatibility] for HALO Bolt 58830, 57720, ACDC Wireless, Air, Air+, 1201, Air Compact, 7550 Compact, Max 55500 and 44400 Wireless jump starter models
- [Power Specs] Input 100-240V AC 50-60Hz (Universal Voltage); Output DC 14V 0.85A. Engineered for HALO Bolt jump starters
- [6.6FT Cable] 6.6FT cord. Charge from your desk, garage, or back seat—no hugging the wall
- [Compact Design] Pocket-sized at 1.85×1.18×0.9 in—stash it in your glove box or center console.
Rank #4
- Compatible with HALO Bolt ACDC 58830/Wireless, HALO Bolt Air Compact Portable Car Jump Starter Emergency Kit HALO Bolt 57720
- AC/DC adapter, Input:100-230V, 50/60Hz, Output: 14 volt
- DC barrel tip round connector, 6.6 feet long cable
- Built-in smart IC chip, Over voltage protection, Over current protection, Over-Heat protection
- LED indicator, Red: Charing, Green: Charge Fully
Rank #3
- Compatible Models: WUKUR Battery Charger Jump Starter for Halo bolt wall adapter 126510 compatible with Halo bolt 57720, bolt 58830,1201, ACDC 58830
- Products Specification: WUKUR charger replacement for Halo Bolt charger, Input: 100-240V AC, 50-60Hz Output: DC 14V, 6.5ft/2M longer power cord, 85g Ultra lightweight, 1.6*2.4*1.1 inch compact size
- NOTICE: Please make sure that your car jump starter models number is matching the compatible models we listed above
- Safety Provide: WUKUR for Halo Acdc Bolt 58830 Charger has built in surge protection, over-current, over voltage, short circuit over temperature protected program
- What Gou Get: 1×Charger cord for Halo Bolt car jump starter 57720/58830 with 6.5FT AC cord. Contact us anytime would get a response within 24 hours
Rank #2
- Wide Compatibility：Compatible with Halo Bolt 58830, 57720, Max 55500, Air+, Wireless 44400 and Air Compact using 126510 charger adapter. This halo battery charger replacement helps restore charging capability.
- Stable Power Output：Provides stable 14V 0.85A output with 100-240V AC input. This halo acdc bolt 58830 charger replacement supports reliable charging at home or office.
- Extended Charging Cord：The 5.9FT cable provides flexible placement and works as a halo charging cord replacement for compatible portable jump starters.
- Safety：ETL listed and designed with protection against over-voltage, over-current, short circuit, and overheating to support safer daily use.
- Replacement Solution：Designed as a charger for halo battery charger replacement needs. Please confirm your model, voltage, connector and 126510 compatibility before purchase.
Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon at the time of purchase will apply.
