Your 24/7 YouTube stream’s electricity cost depends on the equipment’s actual power draw and your local price per kilowatt-hour (kWh). For a steady 100-watt setup running for 30 days, the calculation is 72 kWh; at an illustrative rate of $0.20/kWh, that comes to $14.40 in energy charges. That is calculated from the stated assumptions, not a measurement of a particular streaming setup or a universal electricity rate.
Calculate the electricity cost of a 24/7 stream
Use the equipment’s power draw in watts, the number of hours it runs, and the applicable price per kWh:
As an Amazon Associate I earn from qualifying purchases.
- Convert watts to kilowatts by dividing by 1,000.
- Multiply kilowatts by runtime in hours to find energy use in kWh.
- Multiply kWh by your electricity rate to estimate the variable energy charge.
Formula: (watts ÷ 1,000) × hours × price per kWh = estimated electricity cost.
A 30-day month has 720 hours, so a constant load of P watts uses P × 0.72 kWh. A 365-day year has 8,760 hours. The U.S. Energy Information Administration explains the distinction: watts measure power, while watt-hours measure energy over time; its example of a 40 W load running for five hours uses 0.2 kWh. EIA: measuring electricity.
#1 Best Overall
- Various Monitoring Parameters: The power meter plug can monitor the power (W), energy (kWh), volts, amps, hertz, power factor, cost, minimum and maximum power (W), cumulative days and time of your appliances. By switching 7 display modes, you can easily know the various parameters while the appliance is working. The home energy monitor can also calculate and display how much power your appliance uses and how much electricity bill it cost in cumulative time
- Upgraded LCD Display: With large screen size 2.36 inch x 1.85 inch, clearer monitor backlit, our electrical usage monitor can display the data clearer and more visible no matter day or night. 180°full wide viewing angles is great for reading and recording the data in any angles. No need to stand on the front of the display and bend over to read the numbers
- Adjustable Backlight Time: Our upgraded watt meter has 5 options of backlight time. The default backlight time duration is 10 minutes(bL-0). If you want to change the backlight time, you can press and hold "UP" and "DOWN" button at the same time to enter backlight time setting, then press "UP" and "DOWN" to select the backlight time (bL-0 =10 minutes, bL-1=1 hour, bL-2=4 hours, bL-3=8 hours, bL-4=always on), finally press the "COST" to save the backlight time settings
- Overload protection: When the power of the appliance exceeds the overload power, the LCD will display “OVERLOAD” to warn the user. All the buttons will quit working and can only be workable when you lower or remove the load power. The default overload power is 3680W and is adjustable from 0 to 3680W. In general, you need to set the overload power to 1800W before using. Just press the "function" button for more than 3 seconds to enter the setting
- Data Memory Function: The wattage meter will record your power consumption data when you remove it from socket, or remove appliances from the electricity monitor. You can directly see the last data when you use it next time. This function can also automatically save the data when there is a sudden power failure
30-day costs at three example electricity rates
The following figures are scenario calculations for equipment running continuously for 720 hours. They are not measurements of a particular PC or stream.
| Assumed continuous load | Energy in 30 days | At $0.10/kWh | At $0.20/kWh | At $0.30/kWh |
|---|---|---|---|---|
| 50 W | 36 kWh | $3.60 | $7.20 | $10.80 |
| 100 W | 72 kWh | $7.20 | $14.40 | $21.60 |
| 200 W | 144 kWh | $14.40 | $28.80 | $43.20 |
| 300 W | 216 kWh | $21.60 | $43.20 | $64.80 |
For an exact annual-runtime estimate, multiply a constant load by 8,760 hours, then apply your rate. Multiplying a 30-day month by 12 assumes 360 days, not a 365-day year.
Rank #2
- Multi-function power monitor: Our electric usage monitor can monitor the power (W), electricity(kWh), voltage(V), frequency(Hz), current(A), power factor(PF), unit price($/kWh), total cost($) of your appliances. By switching 8 display modes, you can easily know the various parameters while the appliance is working. The “electricity” mode can calculate and display how much power your appliance uses. And the “total cost” mode will show how much electricity bill it cost in cumulative time
- Overload protection: When the loading power of the appliance is over the default overload threshold 1800W, the whole display with backlight and the word “OVERLOAD” will keep flashing to warn the users. Please turn off the appliance for safety concern
- Premium Material: The whole body of our energy meter is made of high-quality ABS material. It makes our home electricity usage monitor more long lasting, fireproof and anti-drop. The standard US socket and plug is suitable for all US standard appliances
- Backlight Display: With white backlight and black words, the LCD display of our home power monitor can display the data clearer and help you to read the data easier no matter day or night. The backlight will only lights up when the device is connected to AC power. If no button is pressed, the backlight turns off automatically after 10 minutes. You can also press the "UP" button to turn off the backlight manually, and press any button to turn on backlight again
- Easy to reset: No reset tool needed, our appliance power usage meter is easy to reset. You can press the “M” button for 5 seconds directly to reset the device. After reset, all cumulative data (electricity quantity, cost) will be cleared, and all settings will be restored to factory settings
Use your actual equipment draw, not its maximum rating
Decide which devices belong in your estimate. A creator-side total might include the streaming computer, capture or encoding hardware, a monitor left on, and networking equipment. Include only what you want counted in the bill estimate.
Free tools Windows power users keep installed
One-click scans. No signup required.
A computer’s power-supply rating is not a measurement of its continuous wall draw. Use a measured reading or label an assumed wattage clearly. Because workload can vary, a brief instantaneous reading may not represent an entire day. Measure energy across a representative interval that includes the actual streaming workload, or calculate a time-weighted average. The EIA describes meters as instruments for measuring electricity use; a plug-in usage monitor is one category of device to investigate, though no specific model or listing is established here. EIA: measuring electricity.
Rank #3
- Various Monitoring Parameters: The power energy meter can monitor the power (W), energy (kWh), volts, amps, hertz, power factor, cost, minimum and maximum power (W), cumulative days and time of your appliances. By switching 7 display modes, you can easily know the various parameters while the appliance is working. The home energy monitor can also calculate and display how much power your appliance uses and how much electricity bill it cost in cumulative time
- Upgraded LCD Display: With large screen size 2.36 inch x 1.85 inch, clearer monitor backlit, our electrical usage monitor can display the data clearer and more visible no matter day or night. 180°full wide viewing angles is great for reading and recording the data in any angles. No need to stand on the front of the display and bend over to read the numbers
- Adjustable Backlight Time: Our upgraded watt meter has 5 options of backlight time. The default backlight time duration is 10 minutes(bL-0). If you want to change the backlight time, you can press and hold "UP" and "DOWN" button at the same time to enter backlight time setting, then press "UP" and "DOWN" to select the backlight time (bL-0 =10 minutes, bL-1=1 hour, bL-2=4 hours, bL-3=8 hours, bL-4=always on), finally press the "COST" to save the backlight time settings
- Overload Protection: When the power of the appliance exceeds the overload power, the LCD will display “OVERLOAD” to warn the user. All the buttons will quit working and can only be workable when you lower or remove the load power. The default overload power is 3680W and is adjustable from 0 to 3680W. In general, you need to set the overload power to 1800W before using. Just press the "function" button for more than 3 seconds to enter the setting
- Data Memory Function: The wattage meter will record your power consumption data when you remove it from socket, or remove appliances from the electricity monitor. You can directly see the last data when you use it next time. This function can also automatically save the data when there is a sudden power failure
Apply the rate on your electricity bill
The example rates are inputs, not standard prices. Use the applicable per-kWh energy rate on your own bill or tariff. If you are on a time-of-use or dynamic plan, calculate consumption separately for each period and apply that period’s price; the U.S. Department of Energy discusses these rate structures in its guidance on evaluating utility rate options.
Geography makes a substantial difference. The EIA reported 2025 annual average U.S. retail electricity prices ranging from 8.20¢/kWh in North Dakota to 35.72¢/kWh in Hawaii. These are state-level averages, not a substitute for your individual tariff. Your total bill may also include fixed charges, taxes, delivery charges, and other items, so the calculation here estimates the energy component rather than the complete bill. EIA: electricity prices and factors affecting prices.
Rank #4
- Various Monitoring Parameters: The power meter plug can monitor the power (W), energy (kWh), volts, amps, hertz, power factor, cost, minimum and maximum power (W), cumulative days and time of your appliances. By switching 7 display modes, you can easily know the various parameters while the appliance is working. The home energy monitor can also calculate and display how much power your appliance uses and how much electricity bill it cost in cumulative time
- Upgraded LCD display: With large screen size 2.36 inch x 1.85 inch, clearer monitor backlit, our electrical usage monitor can display the data clearer and more visible no matter day or night. 180°full wide viewing angles is great for reading and recording the data in any angles. No need to stand on the front of the display and bend over to read the numbers
- Adjustable Backlight Time: Our upgraded watt meter has 5 options of backlight time. The default backlight time duration is 10 minutes(bL-0). If you want to change the backlight time, you can press and hold "UP" and "DOWN" button at the same time to enter backlight time setting, then press "UP" and "DOWN" to select the backlight time (bL-0 =10 minutes, bL-1=1 hour, bL-2=4 hours, bL-3=8 hours, bL-4=always on), finally press the "COST" to save the backlight time settings
- Overload protection: When the power of the appliance exceeds the overload power, the LCD will display “OVERLOAD” to warn the user. All the buttons will quit working and can only be workable when you lower or remove the load power. The default overload power is 3680W and is adjustable from 0 to 3680W. In general, you need to set the overload power to 1800W before using. Just press the "function" button for more than 3 seconds to enter the setting
- Data Memory Function: The wattage meter will record your power consumption data when you remove it from socket, or remove appliances from the electricity monitor. You can directly see the last data when you use it next time. This function can also automatically save the data when there is a sudden power failure
Keep creator electricity separate from video-delivery estimates
Studies described as the energy use of streaming video may include data centres, networks, and viewing devices—or only some of those components. They do not automatically describe the electricity used by the creator’s computer to transmit a live stream.
What’s actually slowing this PC down?
Pick the symptom - the matching free tool is one click away.
The International Energy Agency’s analysis estimated typical Netflix viewing in 2019 at about 0.077 kWh per viewing hour. The analysis, updated in 2020, emphasizes that the estimate depends on factors including device, network connection, and resolution. It is context about viewing and video delivery, not a measurement of a creator’s streaming PC. IEA analysis of streaming video’s carbon footprint.
Best Value
- Various Monitoring Parameters: The power meter plug can monitor the power (W), energy (kWh), volts, amps, hertz, power factor, cost,minimum and maximum power (W), cumulative days and time of your appliances. By switching 8 display modes, you can easily know the various parameters while the appliance is working. The wattage meter can also calculate and display how much power your appliance uses and how much electricity bill it cost in cumulative time
- Premium Material: The whole body of our power monitor is made of high-quality PC material. It makes our home power consumption monitor more long lasting, heat resistant and fall resistant. The standard US socket and plug is suitable for all US standard appliances
- Overload Protection: When the power of the appliance exceeds the overload power, the word "OVERLOAD" and the LCD display will keep flashing, the buzzer will keep making a bi sound to warn the users. All the buttons will quit working and can only work again when the overload alarm has been cleared by raising the setting value or removing the appliance. The default overload power is 3680W and is adjustable from 0 to 3680W. In general, you need to set the overload power to 1800W before using. Just press the "MODE" button for more than 3 seconds to enter the setting
- KWH Alarm: Our power monitor plug has a upgraded power consumption alarm function. You can set the alarm power consumption for the appliances you monitored. Once the accumulated power consumption reaches the set alarm power consumption, the word "kwh alarm" will be displayed and keep flashing, the LCD will also keep flashing, and the buzzer will keep making a bi sound all the time to warn the users
- Data Memory Function: The watt meter plug in will record your power consumption data when you remove energy meter from socket, or remove appliances from the electricity monitor. All setting data and cumulative data(electricity quantity, cost, unit price, time) will be saved. You can directly see the last data when you use the electric usage meter plug next time(NOT including current, voltage, power, power factors). This function can also automatically save the data when there is a sudden power failure
The German Environment Agency reported about 2.3 W per stream for the data-centre component in its HD video-streaming case study; data transmission and local IT were excluded. That is not an all-in estimate for a YouTube broadcast or a household electricity bill. Umweltbundesamt: digital services and cloud computing.
Do not multiply an audience’s viewing hours by either figure and label the result the streamer’s electricity bill: that counts a different system boundary and different users’ electricity.
Or let it run in the cloud
If you are keeping uploaded video live on YouTube, StreamNeo is a cloud alternative to leaving a local computer running. Upload a recording or build a playlist, add your YouTube stream key, and go live. StreamNeo loops the uploaded video from the cloud, so nothing has to stay on at home. It streams what you upload, up to 4K 60fps, at one flat price per slot, with no re-encode or quality tiers; it can automatically recover if YouTube drops the stream. The first day is free with no card. Monthly: $9.99 per month. See StreamNeo or its pricing. Start your free day with StreamNeo.
Do these 3 things before closing this tab:
1Scan for outdated or missing drivers - takes under a minute2Clear out junk files and repair common Windows errors3Fix the driver behind crashes, sound loss and screen glitchesQuick Recap
Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon at the time of purchase will apply.
