Do these 3 things before closing this tab:
1Fix the driver behind crashes, sound loss and screen glitches2Clear out junk files and repair common Windows errors3Scan for outdated or missing drivers - takes under a minuteA Ring Video Doorbell can run on a rechargeable battery, compatible low-voltage doorbell wiring, a supported Ring Plug-In Adapter, or—in some battery models—a compatible solar charger. The right choice depends on the exact model: wiring trickle-charges battery models but serves as operating power for wired models. Check the model’s current power requirements before connecting anything.
Which power options can a Ring Video Doorbell use?
| Power option | How it works | What to check |
|---|---|---|
| Rechargeable battery | The doorbell operates from its battery, which you recharge as needed. | Battery and charging details vary by model. Ring’s hardwiring guidance covers battery-powered models. |
| Existing doorbell wiring | Compatible low-voltage wiring trickle-charges a battery-powered doorbell. A wired model uses compatible wiring as its operating power. | Confirm the exact model’s voltage and VA requirements, transformer capacity, and chime compatibility. See Ring’s battery-model instructions and hardwiring guidelines. |
| Ring Plug-In Adapter | A supported adapter supplies power from an indoor outlet to compatible doorbells. | Verify the adapter generation and your doorbell model. Ring lists the second-generation adapter as 24 VDC, 500 mA in its hardwiring guidelines. |
| Compatible Ring Solar Charger | A solar charger can help extend battery life on compatible battery models. | Panel placement and sunlight matter. Ring says its compatible chargers need roughly three to four hours of direct sunlight daily to help keep a battery doorbell charged longer; this is not a guarantee of a particular charge level. See Ring’s solar charger guidance. |
| Wired-only power | The doorbell operates from compatible wiring or an approved model-specific power accessory. | Do not assume that a wired model supports battery or solar power; check its instructions and compatibility requirements. |
Does a Ring doorbell need to be hardwired?
No—not every model does. A battery-powered Video Doorbell can operate from its rechargeable battery without existing doorbell wiring. Compatible wiring or a supported Plug-In Adapter can provide a trickle charge, but wiring does not turn every battery model into a wired-only device or necessarily eliminate battery charging.
As an Amazon Associate I earn from qualifying purchases.
A wired-only model, by contrast, needs a compatible source specified for that model. Ring groups products with different electrical requirements, so the brand name alone is not enough to determine the power source. Use the model-specific information in Ring’s hardwiring guidelines.
Recommended Free Tools
Can you use existing doorbell wiring?
Often, if the wiring, transformer, chime, and doorbell model are compatible. Ring’s troubleshooting guidance gives these broad ranges: 8–24 VAC and 5–40 VA for battery-powered doorbells, and 16–24 VAC and 10–40 VA for some wired doorbells. Other wired models have different requirements, so these ranges are not universal specifications. Check the precise model before installation using Ring’s power troubleshooting guidance and model-specific hardwiring guidelines.
#1 Best Overall
- Plug your Ring Battery Doorbell into a standard indoor outlet for 24/7 power and protection, even if your home doesn’t have existing doorbell wires.
- Plug-In Adapter installs in minutes and keeps your doorbell powered without hardwired installation or taking batteries out to recharge them. Insert the doorbell’s rechargeable, Quick Release Battery Pack. Plug-in Adapter will keep the battery inside the doorbell charged.
- Includes a 10-foot cable with clips and comes with built-in short circuit protection.
- Connects to standard indoor power outlets only.
- Works with Video Doorbell Wired, Video Doorbell (1st Generation), Video Doorbell (2nd Generation - 2020 Release), Video Doorbell 2, Video Doorbell 3, Video Doorbell 3 Plus, Video Doorbell 4, Battery Doorbell, Battery Doorbell Plus, Video Doorbell Pro, and Video Doorbell Pro 2. Not compatible with Peephole Cam or Video Doorbell Elite.
Transformer capacity matters as well as voltage. Ring’s troubleshooting guidance identifies 16 VAC, 30 VA for its Hardwired Transformer and gives that rating in multiple-doorbell guidance. It also notes that an undersized transformer, more than one doorbell on a transformer, or power-intensive features can contribute to power problems. Ring recommends 16- to 20-gauge wire in this troubleshooting guidance. Confirm the transformer and chime requirements for your setup rather than treating any one figure as a fit for every model.
Can you power a Ring doorbell from an outlet?
A supported Ring Plug-In Adapter can connect certain compatible doorbells to an indoor outlet. The adapter is an accessory with model-specific compatibility; do not substitute an arbitrary power supply. Ring lists the second-generation Plug-In Adapter at 24 VDC, 500 mA in its hardwiring guidelines. Check that your exact doorbell supports the adapter and that you have the correct generation.
Rank #2
- WIDE COMPATIBILITY: US power cable powers popular smart thermostats including Nest 1st/2nd, Ecobee, Honeywell, and Sensi, as well as doorbells including Ring Video Doorbell, Ring Video Doorbell 2, Ring Video Doorbell Pro, Nest, and Skybell, along with other devices that require constant AC 24 volt power for operation, enabling safe charging of your devices
- EASY INSTALLATION: Assemble along the wall from your outlet to the doorbell and thermostat without the existing doorbell or wiring, with simple setup that can be completed in minutes
- EXTENDED CABLE LENGTH: Cable measures 8 meters (315 inches) long, eliminating concerns about the distance between the socket and your smart thermostat, allowing you to easily plug it into an electrical outlet inside or outside your house
- SAFE AND CONVENIENT OPERATION: Certified battery backup provides a quick solution to low battery issues with direct charging capability by plugging adapter into outlet and powering up, eliminating the need to remove your thermostat to charge the battery, with an AC output of 24V/500mA to meet your power needs
- QUALITY CONSTRUCTION: High quality accessory manufactured by VIIVRIA, a professional team specialized in designing and manufacturing transformers for years, with continuous technology improvements to meet consumer needs and professional customer service support
Can solar power a Ring doorbell?
A compatible Ring Solar Charger can help extend the battery life of supported battery-powered doorbells; it is supplemental rather than a guaranteed replacement for charging. Ring advises roughly three to four hours of direct sunlight each day to help keep a compatible battery doorbell charged longer. Actual results depend on sun exposure, device settings, and motion activity. Ring says solar chargers are not ideal for covered porches and are not recommended indoors. Check compatibility and placement guidance on Ring’s solar charger information page.
What transformer does your Ring doorbell need?
Use the voltage and VA range stated for your exact doorbell and account for any existing chime or additional doorbells on the same transformer. Ring’s general troubleshooting ranges—8–24 VAC, 5–40 VA for battery-powered models and 16–24 VAC, 10–40 VA for some wired models—do not cover every wired model. Its broader hardwiring guidelines divide requirements by model. If the transformer rating is unclear or does not match, do not guess; use the exact model instructions or have a qualified electrician assess it.
Rank #3
- [Product parameters] The doorbell transformer input 110V/120V AC 60Hz, output 24V 500mA, can continuously convert 110/120V to 24V 500mA, and continuously supply power to the doorbell. The charging cable length is 196in (5M).
- 【Extra Long Cable】196in is long enough to connect to your doorbell or smart thermostat perfectly, no need to worry about the distance between the socket and the doorbell or smart thermostat.
- 【Compatibility】Compatible with Nest Hello Doorbells, Ring Video Doorbell, Ring Video Doorbell 2, Ring Video Doorbell Pro and Ecobee,Sensi, Nest, Honeywell, Emerson smart thermostats.
- 【Use with confidence】 Our power adapter for doorbells keeps your device constantly powered , and continuously operate without interruption. The power adapter have overheat protection, over-current protection, overload protection, over-voltage protection.
- 【After-sale service】: If you are not completely satisfied with our products, you can ask for a replacement .If you have any questions, please feel free to contact us.
How to choose the right power source
- Identify the exact model. Find the model name and consult its current Ring instructions for supported power sources and electrical requirements.
- Decide whether you want to use wiring. For a battery model, compatible wiring provides a trickle charge. For a wired-only model, use its specified transformer or approved accessory.
- Check the existing electrical setup. Verify transformer voltage and VA, chime compatibility, and whether other doorbells share the transformer.
- Consider an outlet adapter or solar only if supported. Confirm compatibility for the exact doorbell and accessory; for solar, consider whether the mounting position receives enough direct sunlight.
- Use an electrician when needed. Follow local electrical rules and hire a qualified electrician if you are unsure about the wiring or installation requirements.
Safety and signs of a power problem
Turn off power at the breaker or fuse box before examining or connecting doorbell wiring. Never connect a Ring Video Doorbell directly to mains voltage or use an incompatible power supply: Ring warns that incompatible sources can damage the device and cause electric shock. Local laws and building codes may require a qualified electrician for hardwiring. Some older models or particular installation setups may need additional wiring components, so follow the instructions for the exact generation.
If the doorbell loses power or features stop working, check the battery charge first on a battery model. If it is wired, compare the installation with the model’s power requirements and use Device Health in the Ring app to review its status. Ring lists a flashing red light, power loss, an in-home chime that buzzes or rings spontaneously, and power-intensive features becoming unavailable as possible signs of a power issue. Its power troubleshooting page covers these symptoms and electrical checks.
Quick Recap
Best Value
- 【Wide Compatibility】Designed for Ring Video Doorbell, Ring 2, Ring Pro, and Nest Skybell. Also works with Nest, Ecobee, Sensi, and Honeywell smart thermostats. One adapter powers both your doorbell and thermostat.
- 【Reliable 24V Power】Delivers stable 24V AC at 500MA (12W) to keep your smart devices running without low battery warnings. The 26-foot output cable reaches from any wall outlet to your doorbell or thermostat — no extension cord needed.
- 【Safe & Protected】This plug in transformer provides regulated clean AC power to protect sensitive electronics. Built-in safeguards against overvoltage, overheating, and short circuit keep your connected devices safe. PC fireproof housing for reliable daily use.
- 【Package Includes】1 × 24V AC adapter with 26FT output cable. White finish blends with your wall. Plug directly into a standard outlet — no wiring or assembly required.
- 【Before You Order】This adapter outputs 24V AC at 500MA. Please check your device voltage requirement before purchasing. Using an incompatible charger may damage your equipment. Not for 12V or other non-24V devices.
Rank #4
- Convenient, A quick fix to the problem of "Low battery", which means your video doorbell can work for you any time you'd like, with no uninterrupted operation and viewing influence, that's what we want it do for you, and that's to say you don't need to remove your doorbell in order to charge up the battery
- If you plan to install a Ring doorbell and don’t want to deal with recharging batteries, this transformer is exactly what you need. Drill a hole in your door, feed the wires through the hole, connect them to your new wired Ring, install the Ring over the hole, then plug in the transformer
- The Power supply is designed to Doorbells that require constant 18 volt power for operation, enables you to charge your devices safely. Very easy and convenient to install, just connect your smart doorbell to a power outlet with the adapter and use (Note: Please connect the doorbell before connecting the power supply, and be careful not to let the two cables connected together cause short circuit)
- COMPATIBILITY:18V500mA Doorbell Transformer Replacement for Ring, Nest, Eufy, Arlo,Wyze and other large number of video doorbell equipment. Note: the brand mentioned above is only for demonstrating compatibility
- After-sales service:If you are not satisfied with our products or if you encounter any problems in using our products, please feel free to contact us and we will reply to you within 24 hours
Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon at the time of purchase will apply.
