What’s actually slowing this PC down?
Pick the symptom - the matching free tool is one click away.
To show your DISH receiver on the TV, press SAT on the DISH remote, then use the TV’s Input or Source control to select the HDMI port where the receiver is connected. The HDMI input is a setting on the TV, not a mode you select by pressing SAT.
Switch the TV to the DISH receiver’s HDMI input
-
Turn on the TV and DISH receiver. If the receiver connects through an audio receiver or another device, turn that device on too.
# Preview Product Price 1 
Dish 54.0 Remote Control for The Hopper $34.30 Buy on Amazon 2 
Remote Control for Dish Network Upgraded 54 Series 54.0 54.1 54.2 54.3 UHF $22.29 Buy on Amazon As an Amazon Associate I earn from qualifying purchases.
-
Press SAT on the DISH remote to put it in receiver mode.
Recommended Free Tools
Special offer. See more information about Outbyte and uninstall instructions. Please review EULA and Privacy policy. -
Using the TV’s remote, press Input or Source. If you do not have the TV remote, use the TV’s physical controls to open its input menu.
#1 Best Overall
Dish 54.0 Remote Control for The Hopper- This Remote is compatible with the Hopper family of Recievers, including the Joey and the Wally. Internet connectivity required for full search functionality.
- Just say what’s on your mind to browse your channel guide, recorded programs, and On Demand shows with just a quick search.
- Backlit Keys: Your keypad illuminates automatically whenever you pick up your remote in a dark setting.
- Personalization: Program hot keys to launch an App, record shows, turn on closed captioning, and more.
- Remote Locator: Simply push a button on your DVR and your remote will beep and blink to help you find it.
-
Move through the available inputs, pausing about two seconds between presses, until the DISH picture appears. Select the HDMI number that matches the port used by the receiver’s cable, such as HDMI 1 or HDMI 2.
DISH’s replacement-TV setup instructions recommend pressing SAT before changing the TV input. If the receiver is connected through another device, select the HDMI input used by that device instead.
Can the DISH remote’s Input button change HDMI?
It depends on the remote model and its mode. The DISH 40.0 and 52.0 quick-start guides say their Input button changes the TV input when the remote is in TV mode. On the 52.0, the Input button in SAT mode is assigned to picture-in-picture or multi-view controls, not TV input selection. See the 40.0 guide and 52.0 guide for those model-specific controls.
If you do not know which DISH remote you have, use the TV’s Input or Source control. That method avoids relying on a button whose behavior may vary by model or mode.
If the TV still shows no signal or a blank screen
First distinguish an input-selection problem from a receiver or connection problem. If the TV is showing its own menu or another device, continue cycling through inputs. If the DISH guide appears but the picture is otherwise missing, follow DISH’s troubleshooting steps:
-
Check that the TV, receiver, and any device between them are powered on.
-
Press SAT or HOME on the DISH remote, then try the TV’s Input or Source control again. Pause a few seconds between selections and check each available input.
Special offer. See more information about Outbyte and uninstall instructions. Please review EULA and Privacy policy.Rank #2
Remote Control for Dish Network Upgraded 54 Series 54.0 54.1 54.2 54.3 UHF- ✅【Voice Search Function】WDZP replacement voice remote control compatible with Dish Network Upgraded 54 Series 54.0 54.1 54.2 54.3 UHF for The Hopper. Built-in microphone supports voice search — find your shows faster, no more typing with arrow keys.
- 【Noted】Turn On Your Remote: 1) Open the front panel of your receiver, and press the [SYS INFO] button. 2) Press the [SAT] button on the side of the remote control. You will hear three beeps from the remote control, indicating it has paired with your receiver
- 【Easy Pairing】Add 2 * 1.5V AAA Batteries (not included). 1) Press the [Home] button twice. 2) Select Settings, then Remote Control. 3) Select TV, and then TV Pairing Wizard. 5) Follow the prompts. 6) You can also pair your remote with an Auxiliary Device, such as a player or stereo
- 【Unpairing method】① Press and hold the SAT button on the side of the remote control. After 3 seconds, the indicator light flashes. Release the keys. ② Press and hold the "Home" button and "Guide" at the same time, after 3 seconds, the buzzer will beep three times. Release the keys.
- 【Lifetime Warranty & Exceptional Service】Doesn't match your equipment? Quality problem? Don't worry!! We offer 6-MONTH warranty, free exchange or refund))
-
Check that the video cable is firmly connected at both the receiver and TV. For a new setup, DISH also advises checking both ends of the cable.
-
If the picture does not return, unplug the primary DISH receiver for 10 seconds, reconnect it, and allow up to 10 minutes for it to reset.
These steps follow DISH’s black-screen troubleshooting guidance. For a new TV setup that remains blank after checking the connections, DISH advises contacting the TV manufacturer for setup assistance.
Independent reader supportYour contribution helps us test, update, and keep practical guides available for everyone.Set up one-button input switching with HDMI-CEC
On supported Hopper-family setups, HDMI-CEC can let one button turn on the receiver and TV and select the correct TV input. It requires an HDMI connection and a TV that supports HDMI-CEC. The setting path DISH documents is MENU once or HOME twice, depending on the remote, then Settings → Remote Control → HDMI-CEC. Check DISH’s HDMI-CEC instructions for availability and setup details.
Do these 3 things before closing this tab:
1Repair Windows errors before they cause bigger problems2Fix the driver behind crashes, sound loss and screen glitches3Clear out junk files and repair common Windows errorsDISH also documents Limited Mode under Settings → Remote Control. It can help prevent accidental changes to the TV input.
If the DISH remote’s TV controls do not work
Programming the remote to control the TV is separate from choosing an HDMI input. For newer DISH instructions, press HOME twice or MENU once, then go to Settings → Remote Control, select the TV under Devices, choose Pairing Wizard, and follow the on-screen prompts. DISH’s remote pairing instructions also describe a different legacy procedure for ViP receivers; use the method that matches your receiver.
Quick Recap
Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon at the time of purchase will apply.
