For a practical starting point on PC, set Shadows to Medium, Screen Space Reflections and Volumetrics to Low, and Effects to Medium. If big fights still stutter, try lowering Background Swarm Size to Low or Medium. Keep textures high when your graphics card has enough VRAM, and use DLSS or FSR only if the GPU is limiting performance. These are settings to test, not a guaranteed best configuration: Space Marine 2 can be CPU-limited, in which case lowering resolution may do little.
Start with these settings
Change one setting at a time in a repeatable, demanding encounter. Check both average frame rate and whether frame times feel consistent; a single average can conceal short combat dips.
As an Amazon Associate I earn from qualifying purchases.
| Setting | Starting point | What to expect |
|---|---|---|
| Background Swarm Size | Low or Medium if large fights dip | May ease CPU work from enemy simulation, at the cost of making the largest hordes look less populated. PC Optimized Settings reports a 3–5% improvement in its tests when reducing this setting; Tier1Settings gives a similar estimate. These are publisher-specific results, not a guaranteed gain on every PC. Tier1Settings PC Optimized Settings |
| Shadows | Medium | A reasonable GPU-load reduction to test. PC Optimized Settings measured only a 1–2% difference in its scenes, so the benefit can be small and setup-dependent. Tier1Settings PC Optimized Settings |
| Screen Space Reflections | Low; use Default if you prefer the image | Tier1Settings recommends Low, while PC Optimized Settings found Default barely slower than Off on its test system. The better choice depends on the scene and your visual preference. Tier1Settings PC Optimized Settings |
| Volumetrics | Low when GPU-limited | Can reduce load in open battles; PC Optimized Settings reports up to a 5% frame-rate cost in large open areas on its tested setup. Fog, lighting and particles may look less full at Low. Tier1Settings PC Optimized Settings |
| Effects | Medium during combat dips | May help in horde combat, though another analysis found a smaller average cost in its tests. Keep it higher if the visual change is not worth the performance difference on your system. Tier1Settings PC Optimized Settings |
| Textures and filtering | High with at least 8 GB VRAM at 1080p or 1440p; Medium is a sensible test on a 6 GB card if stuttering suggests memory pressure | Texture memory use varies by resolution, scene and system. PC Optimized Settings reports up to 6.25 GB at 1080p, 7 GB at 1440p and 10 GB at 4K Ultra on its test setup; these are not universal requirements. Tier1Settings PC Optimized Settings |
| Upscaling | Try DLSS on supported RTX cards or FSR for broader hardware support; begin with Quality | Upscaling renders below the output resolution and can improve performance when the GPU is the limit, with a possible loss of image clarity. At 1080p, test native rendering or DLAA if you have headroom; the preferred balance depends on your display and taste. Tier1Settings PC Optimized Settings |
| Frame generation | Optional; assess base performance and responsiveness first | The game supports DLSS and FSR frame-generation components, but the available sources do not establish a universally best option or a reliable gain across hardware. Focus Patch 5.0 notes Focus FSR and DLSS Q&A |
Find out whether the CPU or GPU is the limit
- Choose a repeatable demanding scene. Note the average FPS and whether frame times remain consistent through combat. Avoid comparing different encounters or changing several options at once.
- Test resolution or upscaling. If lowering resolution or enabling upscaling barely changes performance, a CPU limit is possible. An independent analysis observed CPU-bound behavior across resolutions on its test rig; that result does not diagnose every PC. Tier1Settings PC Optimized Settings
- Try Background Swarm Size. If the dips happen around large groups, reduce it to Low or Medium and compare the same scene. The trade-off is a less populated-looking horde.
- Test GPU-heavy options if resolution helps. Try Volumetrics Low, Shadows Medium and Screen Space Reflections Low individually. Keep a change only when its visual cost is worth the measured improvement on your PC.
- Check texture settings if you see stutter. On a lower-memory graphics card, try Medium textures and filtering, particularly if the issue appears at higher resolution.
Choose upscaling and frame generation for your hardware
Focus describes FSR 2 Super Resolution as hardware-agnostic and FSR 3.1 as adding frame generation. Its Q&A lists Radeon RX 5000 Series and GeForce RTX 20 Series as AMD’s recommended minimum specification for FSR 3.1 frame generation. For NVIDIA, it lists RTX 20 Series and later for DLSS upscaling or DLAA, and RTX 40 Series and later for DLSS frame generation. Focus also says HAGS is needed for DLSS frame generation on Windows 10. Support can change with game builds and drivers, so check the graphics menu on your installed version. Focus FSR and DLSS Q&A
Upscaling and frame generation solve different problems. Upscaling can reduce GPU rendering work; frame generation creates additional displayed frames, but the cited sources do not establish its effect on responsiveness for every system. Try it only after checking how the game feels at its base frame rate, and judge smoothness alongside input response.
#1 Best Overall
- Multi-Platform PC Gaming Controller: Working with Switch, PC, Android, and iOS devices via Bluetooth, wired, and wireless dongle connections.
- Hall Effect Joysticks: Delivering enhanced recentering performance for smoother control and superior anti-drift capability. Plus, with anti-friction rings.
- 2-Way Trigger Lock: With trigger stops, gamers can toggle between short and long pull positions. Additionally, gamers can activate hair trigger mode by pressing M+LT/RT (triggers must be in the long pull position).
- 1000Hz Polling Rate: This ensures that your inputs are registered almost instantaneously, minimizing lag and maximizing your performance during competitive play.
- Mechanical Circular D-pad: Designed for quick reactions and accuracy in every direction, this D-pad elevates your gaming experience with superior responsiveness.
Check whether your PC meets the stated targets
Saber Interactive lists these PC configurations and targets. They are vendor targets, not guarantees for every encounter or game update. Saber Interactive PC requirements
| Target | CPU | Memory | Graphics card | Listed performance target |
|---|---|---|---|---|
| Minimum | Ryzen 5 2600X or Core i5-8600K | 8 GB RAM; 6 GB VRAM | Radeon RX 580 or GeForce GTX 1060 | 30 FPS at 1920×1080 on Low |
| Recommended | Ryzen 7 5800X or Core i7-12700 | 16 GB RAM; 8 GB VRAM | Radeon RX 6800 XT or GeForce GTX 3070 | 60 FPS at 1920×1080 on Ultra |
Both configurations list DirectX 12 and an SSD with 75 GB of available storage. Saber Interactive PC requirements
Rank #2
- Supported Multi-Platform:Switch/Switch 2 (NO support wake-up function)/iOS/Android/Windows PC (Notice:Not compatible with Xbox, PlayStation or GeForce Now, For game platforms not mentioned, please consult customer service before buying）
- Connection modes:Wired/Bluetooth/Wireless Dongle(Connect to PC via Bluetooth : Select iOS (phone) mode, but it's not recommended; Dongle is more stable)
- 【Innovative Intelligent Interactive Screen】Manba One V2 wireless game controllers create a new era of controller screens; Equipped with a 2-inch display, no App & software needed, you can set the pc controller directly through the screen visualization, More convenient operation
- 【Micro Switch Button】Manba One wireless controller has Micro Switch Button and ALPS Bumper; The 6-axis gyroscope function makes switch games more immersive
- 【Customize Your Own Controller】The intelligent interactive screen allows you to easily set vibrations, buttons, joysticks,lights, etc., without the need for complex key combinations; 4 configurations can be saved to unlock your own gameplay for different games; The 4 back keys support macro definition settings, and you can activate the set character's ultimate move with one click
Troubleshoot instability separately from low FPS
If the game is unstable rather than simply slow, Focus support says overlays such as RTSS and NVIDIA’s GeForce Experience performance overlay may cause problems. Close them as a troubleshooting step and update your display driver; neither action is a guaranteed FPS boost. Focus support
Do these 3 things before closing this tab:
1Fix the driver behind crashes, sound loss and screen glitches2Clear out junk files and repair common Windows errors3Scan for outdated or missing drivers - takes under a minuteFocus’s Patch 5.0 notes reported slight performance and texture-streaming improvements and the addition of FSR 3 and DLSS 3 frame-generation components. Those are historical patch notes, not a description of every later build, so rely on the options available in your installed version. Focus Patch 5.0 notes
Quick Recap
Best Value
- MODERNIZED DESIGN — Experience the modernized design of the XBOX Wireless Controller with sculpted surfaces and updated geometry that enhances comfort and control during long gaming sessions.
- PRECISION PERFORMANCE — Stay on target with a hybrid D-pad and textured grips on triggers, bumpers, and back case for improved accuracy and handling.
- SHARE BUTTON: Seamlessly capture and share content such as screenshots, recordings, and more with the new Share button.
- VERSATILE CONNECTIVITY — Connect via USB-C for plug-and-play on console and PC, or quickly pair and switch between supported devices with XBOX Wireless and Bluetooth support.
- BUILT-IN AUDIO SUPPORT — Plug in compatible headsets using the 3.5mm audio jack for direct voice chat and immersive in-game sound.
Rank #4
- Tri-mode Connectivity: Wired for Xbox, 2.4G & Wired for PC, and Bluetooth for Android. The G7 Pro supports seamless connectivity across Xbox, PC, and Android. Effortlessly switch between modes using the convenient physical mode switch.
- TMR Sticks: The G7 Pro features GameSir's Mag-Res TMR sticks, combining Hall Effect durability with traditional potentiometer performance. This advanced technology delivers stable polling rates for smooth, drift-free gaming with low power consumption.
- Hall Effect Analog Triggers: The GameSir precision-tuned Hall Effect analog triggers provide unmatched smoothness and linear input for precise control. Featuring clicky Micro Switch trigger stops, gamers can easily switch based on their preferences.
- 1000Hz Polling Rate on PC: Experience ultra-responsive gaming with a 1000Hz polling rate on PC, available through both wired and 2.4G wireless connections. This ensures instantaneous input registration, reducing lag and optimizing your performance for the most competitive gameplay.
- GameSir Nexus App: The G7 Pro is compatible with the upgraded GameSir Nexus app, which brings a significant upgrade over the original. It introduces powerful new features such as gyro settings, stick curve adjustments, and button-to-mouse mapping, giving you deeper customization and more control than ever before.
Rank #3
- Compatible with Windows and Android.
- 1000Hz Polling Rate (for 2.4G and wired connection)
- Hall Effect joysticks and Hall triggers. Wear-resistant metal joystick rings.
- Extra R4/L4 bumpers. Custom button mapping without using software. Turbo function.
- Refined bumpers and D-pad. Light but tactile.
Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon at the time of purchase will apply.
