What’s actually slowing this PC down?
Pick the symptom - the matching free tool is one click away.
Google’s staged rollouts can make software updates feel inconsistent: you might see the Pixel Watch June 2024 update today, while someone else sees it days later—even on the same Wi‑Fi network and with the same phone model.
This guide focuses on practical, repeatable steps: how to check for the update, how to confirm you actually installed the June 2024 build, and what to do when the update doesn’t appear or the install fails.
As an Amazon Associate I earn from qualifying purchases.
No hype, just a dependable checklist you can run end-to-end.
Free tools Windows power users keep installed
One-click scans. No signup required.
What the Pixel Watch June 2024 update rolling out actually means
A “rolling out” update is released in phases to reduce load and catch issues early. Your watch may require a specific combination of factors—region, carrier settings, device readiness, battery state, and backend rollout rules—before it becomes eligible.
#1 Best Overall
- The Pixel Watch 2 comes with three new advanced sensors for heart rate tracking, skin temperature, and stress management[1,2]; 100% recycled light aluminum housing makes it comfortable to wear[3]
- The all-new heart rate sensor and Google AI combine for Fitbit’s most spot-on heart rate tracking yet[4], so you can get more precise health and fitness info[5]
- Go even longer with the enhanced 24-hour battery and always-on display[6,7]; charge for 75 minutes to get a full day of battery life[8]
- Identify potential signs of stress with Fitbit’s body-response feature, so you can manage it in the moment[5]; and track variations in your skin temperature, blood oxygen levels, and sleep to help you spot possible changes[5,9,10]
- Get help with Emergency SOS and Fall Detection if you’re feeling unsafe or if you’ve had a hard fall[11,12]; and Safety Check alerts your close contacts if you don’t respond to a set check-in timer[13]
That’s why you’ll often see different behavior across Pixel Watch vs Pixel Watch 2, and across phones that run different Android versions or use different connectivity profiles.
Prerequisites before you start
- Battery: Charge Pixel Watch to at least 50% (higher is better). Many installs pause or fail if the battery drops too low during download or install.
- Connectivity: Keep the watch paired and ensure the phone has internet. Wi‑Fi helps the watch download faster if your phone’s network conditions are stable.
- Time: Plan for 15–45 minutes, depending on download size and how busy Google’s rollout servers are that day.
- Backup (optional but smart): Wear OS stores some data on-watch and some via your paired Google account. If you’re about to do a risky step like a factory reset, create the best available backup and note any critical settings.
If you’re on a work profile or heavily managed phone (MDM/enterprise), check that policy restrictions aren’t blocking system updates or background downloads.
How to check for the June 2024 update on Pixel Watch
You can check from either the watch itself or from your paired phone. Use both if you want faster confirmation.
Quick wins for a faster PC:
Clear out junk files and repair common Windows errorsFree Scan →Scan for outdated or missing drivers - takes under a minuteDriver Scan →Repair Windows errors before they cause bigger problemsFix Now →Check on the watch (fastest path)
- Open Settings on your Pixel Watch.
- Scroll to System.
- Tap System update (wording can vary slightly by build).
- Wait for the watch to check for updates.
- If available, select Download then Install.
If you see “Up to date,” it doesn’t necessarily mean you’re on the June 2024 build; it may mean you’re on the latest build currently staged for your device.
Check on your phone (Pixel Watch via the Pixel Watch app)
On most setups, the phone-side app can prompt you when the watch is eligible.
- Open the Pixel Watch app on your phone.
- Go to Settings (or the watch/device details screen).
- Look for Software update / System update.
- If it shows an update for your watch, follow the prompts to download and install.
If the phone shows an update but the watch doesn’t, keep the watch on the charger and ensure it stays connected for the phone to push the update.
How to verify you got the right update
The rollout announcement is only half the story. To confirm you installed the June 2024 build, you need the actual software version details.
PC Slower Than It Used to Be?
A free scan shows the junk files, broken settings and background clutter dragging Windows down - then fixes them in one click.Free scan · Windows 10 & 11Outdated Drivers Are Slowing You Down
One free scan finds every outdated or missing driver and matches the right update for your exact hardware.Free scan · exact hardware matchConfirm the software version and patch level
After updating, verify these items inside the watch:
Rank #2
- The Pixel Watch 2 comes with three new advanced sensors for heart rate tracking, skin temperature, and stress management[1,2]; 100% recycled light aluminum housing makes it comfortable to wear[3]
- The all-new heart rate sensor and Google AI combine for Fitbit’s most spot-on heart rate tracking yet[4], so you can get more precise health and fitness info[5]
- Go even longer with the enhanced 24-hour battery and always-on display[6,7]; charge for 75 minutes to get a full day of battery life[8]
- Identify potential signs of stress with Fitbit’s body-response feature, so you can manage it in the moment[5]; and track variations in your skin temperature, blood oxygen levels, and sleep to help you spot possible changes[5,9,10]
- Get help with Emergency SOS and Fall Detection if you’re feeling unsafe or if you’ve had a hard fall[11,12]; and Safety Check alerts your close contacts if you don’t respond to a set check-in timer[13]
- Open Settings → System.
- Tap About.
- Check Software version and Android security patch level (or similar wording).
Write down the values you see. If you later run troubleshooting steps, having the exact build string helps you confirm whether you truly changed versions.
Keep a quick changelog record
When an update installs, your watch may show a release notification (or you can view it via system notifications). If you want a clean record, take one quick note:
- Software version string
- Security patch month/year
- Date/time the install completed
This is especially useful if an issue appears later and you need to know exactly which build introduced it.
Recommended Free Tools
What to do if the update isn’t available yet
Most “not available” cases aren’t errors—they’re staging. Still, you can reduce waiting time by making sure your watch is eligible and connected properly.
Understand staged rollouts
Staged rollouts can look like this: two people with the same Pixel Watch model check within minutes, and one gets the update immediately while the other sees nothing. Over the next days, eligibility expands.
There’s no reliable user-side setting that forces eligibility. Your goal is to make the device ready so it can accept the update as soon as it’s your turn.
Try these checks in order
- Confirm pairing: Make sure the watch is connected in the Pixel Watch app and shows normal connectivity on the watch.
- Use a stable network: Prefer a known-good Wi‑Fi network on your phone. Avoid captive portals (hotel/login pages) during update attempts.
- Restart both devices: Reboot the watch, then restart the phone. After reboot, open the Pixel Watch app so it re-establishes the link.
- Keep the watch awake: During the check/download, keep the watch from sleeping too aggressively. If needed, place it on the charger and interact with it occasionally.
- Try again after a few hours: If the rollout backend hasn’t flagged your device yet, checking repeatedly won’t change eligibility immediately.
If the update fails: troubleshooting playbook
Update failures usually fall into predictable categories: connectivity drops, insufficient battery, storage/space constraints, or a temporary server-side download problem.
Common failure points
- Download stuck: The watch never completes the download phase.
- Install error: It downloads but fails during install/reboot.
- Looping prompts: The watch repeatedly asks to update but can’t complete.
- Connection loss: The phone drops BLE/Wi‑Fi link mid-process.
Step-by-step fixes
Run these in order. Stop once the update succeeds.
- Charge to 80–100%: Put Pixel Watch on the charger. A lot of install failures disappear when the battery is strong enough.
- Toggle Airplane Mode: On the watch, briefly enable Airplane Mode and then disable it to refresh connectivity.
- Reboot the watch: Restart Pixel Watch and re-check Settings → System → System update.
- Verify phone connectivity: Make sure the phone has stable internet (no VPN rules that block downloads unless you trust them).
- Forget and re-pair (only if needed): If your watch is behaving oddly, disconnecting and re-pairing can restore a healthy update channel.
- Try again later: If the error repeats instantly, the download job may be failing due to server-side issues. Wait a few hours and retry.
If you can read an error code or message on the watch, note it. That error text often points to the exact category (network vs storage vs system install).
Rank #3
- The Pixel Watch 2 comes with three new advanced sensors for heart rate tracking, skin temperature, and stress management[1,2]; 100% recycled light aluminum housing makes it comfortable to wear[3]
- The all-new heart rate sensor and Google AI combine for Fitbit’s most spot-on heart rate tracking yet[4], so you can get more precise health and fitness info[5]
- Go even longer with the enhanced 24-hour battery and always-on display[6,7]; charge for 75 minutes to get a full day of battery life[8]
- Identify potential signs of stress with Fitbit’s body-response feature, so you can manage it in the moment[5]; and track variations in your skin temperature, blood oxygen levels, and sleep to help you spot possible changes[5,9,10]
- Get help with Emergency SOS and Fall Detection if you’re feeling unsafe or if you’ve had a hard fall[11,12]; and Safety Check alerts your close contacts if you don’t respond to a set check-in timer[13]
Update reliability tips (battery, connectivity, timing)
These small choices can reduce failures dramatically, especially during heavy rollout windows.
Best time to install
- Choose a time when you can leave the watch on its charger.
- Avoid peak moments right after the rollout begins (many users checking at once).
- If possible, start an update when your phone isn’t simultaneously doing large background syncs (app stores, cloud backups, OS downloads).
Battery and charging requirements
Even if the watch has enough battery to begin downloading, install phases can be more demanding. If the watch drops below a threshold mid-install, it may abort and revert.
When in doubt: charge to full, keep it there, and don’t remove it until the process says it’s complete.
The Tool Desk
Outbyte PC Repair FREEClear out junk files and repair common Windows errorsFree Scan →Outbyte Driver Updater FREEFix the driver behind crashes, sound loss and screen glitchesFind Drivers →Alternatives if you’re stuck
If the update won’t install after multiple attempts, you have two practical alternatives: re-pairing (to fix connectivity/agent issues) or a factory reset (to rule out corrupted local settings).
Reboot + re-pair sequence
- Restart your phone.
- Restart Pixel Watch.
- In the Pixel Watch app, remove the watch from the paired list (wording varies by Android version).
- Re-pair using the watch setup prompts.
- Once connected normally, check System update again.
Re-pairing can temporarily reset sync behavior and often fixes cases where the update agent can’t communicate reliably.
Factory reset (last resort)
A factory reset can fix stubborn states, but it’s disruptive: it removes watch data and requires reconfiguration. Use this only when other steps failed.
- Make sure the watch is charged and connected to a stable phone link.
- After reset, set the watch up fresh and then check for updates again from Settings → System → System update.
If you’re troubleshooting an issue that started after an update fails, capture the exact error message before resetting so you can compare behavior afterward.
Do these 3 things before closing this tab:
1Repair Windows errors before they cause bigger problems2Fix the driver behind crashes, sound loss and screen glitches3Clear out junk files and repair common Windows errorsComparing update behavior: Pixel Watch vs Pixel Watch 2
Google often staggers updates across models. Even when the update is “the same theme,” device eligibility rules can differ due to hardware, display size, sensors, and battery profiles.
Rank #4
- The Pixel Watch 2 comes with three new advanced sensors for heart rate tracking, skin temperature, and stress management[1,2]; 100% recycled light aluminum housing makes it comfortable to wear[3]
- The all-new heart rate sensor and Google AI combine for Fitbit’s most spot-on heart rate tracking yet[4], so you can get more precise health and fitness info[5]
- Go even longer with the enhanced 24-hour battery and always-on display[6,7]; charge for 75 minutes to get a full day of battery life[8]
- Identify potential signs of stress with Fitbit’s body-response feature, so you can manage it in the moment[5]; and track variations in your skin temperature, blood oxygen levels, and sleep to help you spot possible changes[5,9,10]
- Get help with Emergency SOS and Fall Detection if you’re feeling unsafe or if you’ve had a hard fall[11,12]; and Safety Check alerts your close contacts if you don’t respond to a set check-in timer[13]
If you own both models, treat them as separate rollout timelines: one may be eligible first and the other may lag.
Security and privacy considerations
System updates generally include security fixes and stability improvements, which is why it’s worth installing once available. Still, take a practical stance: don’t update on an unreliable power/bandwidth setup.
- Confirm the update’s security patch level in Settings → About.
- Avoid starting updates when your phone is on a metered network unless you’re sure the download size is small enough for your plan.
- During the update process, avoid toggling settings that interrupt connectivity (aggressive battery savers, VPN changes, network switching).
Common mistakes people make during a rollout
- Checking too aggressively: Repeatedly starting update checks won’t force eligibility. Give the rollout time.
- Leaving battery low: Download may start fine, then fail during install.
- Taking the watch off the charger: If the update is still installing, removal can interrupt the process.
- Ignoring phone connectivity: If the phone can’t reach Google services reliably, the watch may fail to retrieve update assets.
- Not verifying the build after installing: Always confirm the version/patch level so you know it’s truly the June 2024 update.
FAQ: Pixel Watch June 2024 update rolling out
How long will it take for the Pixel Watch June 2024 update to show up?
Rollouts often expand over days rather than hours. If you’re not seeing it today, it may become available after your device is added to the next eligibility batch.
Why does my Pixel Watch say it’s up to date, but I don’t have the June 2024 changes?
“Up to date” means your watch has the latest build for your current eligibility—not necessarily the most recently announced build. Verify the software version and security patch level in Settings → About.
Can I speed things up?
You can’t force eligibility, but you can reduce preventable delays: keep the watch charged, maintain stable connectivity, and re-check System update after a reboot or a few hours.
What should I do if the update download completes but installation fails?
Charge the watch to full, restart the watch, confirm phone internet stability, and retry. If failure repeats, consider re-pairing. A factory reset is the last step.
Will installing the June 2024 update erase my data?
Normal system updates shouldn’t wipe the watch. However, if you perform a factory reset, that will remove watch data and require setup again.
Where can I find the exact release notes?
The most reliable place is the official Pixel Watch update notes associated with the specific build you installed. Since build strings differ by rollout batch, use your watch’s software version to match the correct notes.
Bottom Line
The Pixel Watch June 2024 update rolling out is usually a staged process, not a broken feature. Use the watch and phone check paths, verify the software version and patch level, and only escalate to re-pairing or factory reset if repeated installs fail.
When you treat updates like a controlled install—charged watch, stable connection, and correct verification—you avoid most rollout headaches and you’ll know exactly what you installed.
Quick Recap
Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon at the time of purchase will apply.
