YouTube does not document a setting that automatically restarts a broadcast after it has ended. Its auto-start and auto-stop controls let an encoder start or stop streaming; they are not a promise to relaunch a finished broadcast. To start a fresh broadcast automatically, you need an encoder or automation system that supports that behavior, and you should verify it with that tool’s current instructions and a test.
First, distinguish an ended stream from a dropped connection
“Restart” can mean different things. A temporary connection interruption may allow an encoder to reconnect, while a completed broadcast has ended on YouTube. Continuing a long event is another case. YouTube’s published guidance does not treat these as the same feature or guarantee that an ended broadcast will relaunch automatically.
YouTube’s encoder setup instructions say to end a stream by stopping content from the encoder. They also state that streams under 12 hours are automatically archived. That archive rule concerns the ended broadcast; it does not restart it. YouTube’s encoder setup instructions
What YouTube’s auto-start and auto-stop controls do
YouTube describes these controls as allowing you to start or stop streaming from your encoder. They govern the encoder’s start/stop behavior; the cited guidance does not say that they relaunch a broadcast after it has ended. If stream settings are reused, the auto-start and auto-stop choices are copied with them, but that still is not an after-end restart guarantee. Manage live stream settings
Crashes, No Sound, or Screen Glitches?
Random freezes, missing sound and display glitches usually trace back to one bad driver. Find and replace yours safely.Free scan · under a minutePC Slower Than It Used to Be?
A free scan shows the junk files, broken settings and background clutter dragging Windows down - then fixes them in one click.Free scan · Windows 10 & 11#1 Best Overall
- Read Before You Buy — No Video Output: These adapters support charging and USB 2.0 data transfer, but cannot transmit video signals. Except for standard USB webcams (which use USB data only), they are not compatible with HDMI/DisplayPort cables, video-capable USB-C hubs, or docking stations with video output.
- Convert USB-A Ports to USB-C: Designed to connect USB-C earphones, cables, flash drives, card readers, and other USB-C accessories to standard USB-A ports. Plug-and-play with no drivers or software required.
- Aluminum Alloy Housing: Built with a sturdy aluminum alloy shell that aids in heat dissipation and protects against daily wear and scratches. Designed to maintain a stable and secure connection.
- Compact & Travel-Friendly: The ultra-compact design allows the adapter to stay plugged into your device without blocking adjacent ports or adding bulk, reducing wear and tear on your original USB ports.
- 12-Month Warranty: Backed by a 12-month manufacturer warranty for peace of mind. Designed to meet strict quality control standards for reliable everyday performance.
To begin a broadcast with an encoder, use Live Control Room to obtain the stream URL and stream key, then configure the encoder and start sending the stream. For current setup steps, see Create a YouTube live stream with an encoder. If YouTube reports a start error, its troubleshooting guidance says to obtain a stream key in Live Control Room and update the encoder; this addresses a start problem, not automatic relaunch after a completed broadcast. Troubleshoot your YouTube live stream
Choose the right approach for what you want to happen
| Approach | What it does | What to check |
|---|---|---|
| YouTube auto-start/auto-stop | Lets the encoder start or stop streaming, according to the selected settings. | Do not rely on it to restart a broadcast after completion. YouTube Help |
| Live Redirect | Hands viewers off after a stream ends to a Premiere or another live stream. | Prepare the destination first. This redirects viewers; it does not restart the ended broadcast. YouTube notes that viewers may need to wait about two seconds for their screens to reload. YouTube Help |
| Encoder or automation software | May be able to automate a new broadcast, depending on the specific tool. | Check its current instructions and test whether it reconnects after an interruption, creates a new YouTube event, or resumes an event that remains open. YouTube’s cited guidance does not establish a universal third-party behavior. |
Test an automatic relaunch before depending on it
- Define the desired result. Decide whether you need reconnection after a brief interruption, continuation of a long-running event, or a fresh broadcast after YouTube has ended the previous one.
- Check YouTube settings. In Live Control Room, review the stream’s auto-start and auto-stop settings, treating them only as encoder start/stop controls—not as a restart feature. Manage live stream settings
- Check the encoder’s current documentation. Confirm what it does when a broadcast finishes and whether it creates a new YouTube event. Do not assume reconnect behavior means it can relaunch a completed event.
- Run an unlisted test. Observe the result in Live Control Room and confirm which event is live, what viewers see, and how the ended stream is archived. Treat this as a practical verification step, not a YouTube guarantee.
- Monitor the test. YouTube recommends testing in advance, previewing in Live Control Room, and monitoring stream health and audio/video. After the event has stopped on YouTube, stop the encoder as appropriate and verify any local recording you need. See YouTube live streaming tips and encoder settings, bitrates, and resolutions.
Use Live Redirect when viewers need a next destination
If the goal is to keep viewers watching something after the current broadcast ends, configure Live Redirect to send them to a prepared Premiere or another live stream. YouTube describes this as a post-stream audience handoff—not a way to restart the broadcast that just ended. Set up the destination before relying on the handoff. Manage live stream settings
Rank #2
- 5-in-1 USB-C Hub: Experience comprehensive connectivity featuring a Power Delivery input, two USB-A 2.0 ports, a USB-A 3.0 port, and an HDMI port. (Note: The USB-C power delivery input port is only for connecting an external wall charger to power your laptop and cannot power peripheral devices.)
- 90W Pass-Through Charging: Achieve optimal charging with 90W pass-through power to your laptop, supported by a total input of 100W, with the hub reserving 10W for operational efficiency. (Note: Wall charger not included.)
- Quick Data Transfers: Accelerate your productivity with rapid data transfers using a high-speed 5Gbps USB 3.0 port and two 480Mbps USB 2.0 ports.
- 4K HDMI Display: Enhance your visual experience with a hub capable of delivering 4K resolution at 30Hz in both mirror and extend modes. Please note that this hub is compatible with MacBook (macOS 12 and newer), Windows 10 and 11, ChromeOS, and laptops equipped with DP Alt Mode and Power Delivery. Note: This device is not compatible with Linux.
- What You Get: Anker USB-C Hub (5-in-1, 4K HDMI), welcome guide, 18-month warranty, and our friendly customer service.
Or let it run in the cloud
If your goal is a YouTube channel that keeps playing uploaded videos in a loop, rather than restarting a camera or encoder broadcast, StreamNeo is a cloud option. Upload a recording or build a playlist, add your YouTube stream key once, and go live. StreamNeo loops the uploaded videos from the cloud, so no computer, OBS or home connection has to stay on. It streams to YouTube, not from a camera or to other platforms.
Quick Recap
Best Value
- 5-in-1 Connectivity: Equipped with a 4K HDMI port, a 5 Gbps USB-C data port, two 5 Gbps USB-A ports, and a USB C 100W PD-IN port. Note: The USB C 100W PD-IN port supports only charging and does not support data transfer devices such as headphones or speakers.
- Powerful Pass-Through Charging: Supports up to 85W pass-through charging so you can power up your laptop while you use the hub. Note: Pass-through charging requires a charger (not included). Note: To achieve full power for iPad, we recommend using a 45W wall charger.
- Transfer Files in Seconds: Move files to and from your laptop at speeds of up to 5 Gbps via the USB-C and USB-A data ports. Note: The USB C 5Gbps Data port does not support video output.
- HD Display: Connect to the HDMI port to stream or mirror content to an external monitor in resolutions of up to 4K@30Hz. Note: The USB-C ports do not support video output.
- What You Get: Anker 332 USB-C Hub (5-in-1), welcome guide, our worry-free 18-month warranty, and friendly customer service.
Rank #4
- Dual Converters, Infinite Potential：Includes 2× USB C male to USB A female adapters and 2× USB A male to USB C female adapters. Perfect for a wide range of uses—tablets with Bluetooth keyboards, expand USB ports on macbook, and more. Two different converters for all your daily needs
- Next-Level 10Gbps & 3A Charging: No more slow 480Mbps, this usb to usb c adapter has a transfer speed of up to 10Gbps, allowing you to do more transferring in less time. This usb adapter fits both USB A and USB C charger, supporting up to 3A fast charging
- Upgraded Exquisite Craftsmanship: With an aluminum alloy housing and metal connector, the usbc to usb adapter is extremely durable and sturdy. Rigorously tested to withstand more than 10,000 times of plugging and unplugging, ensuring long-lasting performance
- Broad Compatible: The usb c to usb adapter widely supports all USB C/ USB A devices like laptops, tablets, cellphones, car chargers, and phone chargers. Such as compatible with MacBook Pro/Air 2023/2022, Thunderbolt 4/3 Devices,Apple MagSafe Watch 9/8/7/SE/Ultra, iPad Pro 2022/2021, Samsung Galaxy S23/S20/S10, and iPhone 17/16/15 Pro. Plug and play
- Please Note: To reach 10Gbps speed, keep the cable under 3.3 ft. For USB A Male to USB C adapters, try flipping the USB C connector. USB C Male to USB A adapters support bidirectional 10Gbps transfer within 3.3 ft
Rank #3
- Sleek 7-in-1 USB-C Hub: Features an HDMI port, two USB-A 3.0 ports, and a USB-C data port, each providing 5Gbps transfer speeds. It also includes a USB-C PD input port for charging up to 100W and dual SD and TF card slots, all in a compact design.
- Flawless 4K@60Hz Video with HDMI: Delivers exceptional clarity and smoothness with its 4K@60Hz HDMI port, making it ideal for high-definition presentations and entertainment. (Note: Only the HDMI port supports video projection; the USB-C port is for data transfer only.)
- Double Up on Efficiency: The two USB-A 3.0 ports and a USB-C port support a fast 5Gbps data rate, significantly boosting your transfer speeds and improving productivity.
- Fast and Reliable 85W Charging: Offers high-capacity, speedy charging for laptops up to 85W, so you spend less time tethered to an outlet and more time being productive.
- What You Get: Anker USB-C Hub (7-in-1), welcome guide, 18-month warranty, and our friendly customer service.
- One flat price per slot for any uploaded quality up to 4K 60fps, without re-encoding or quality tiers.
- Automatic recovery if YouTube drops the stream.
- First day free, with no card required; one free day per account.
- Monthly: $9.99 per month.
Start your free StreamNeo day.
Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon at the time of purchase will apply.
Recommended Free Tools
