Do these 3 things before closing this tab:
1Scan for outdated or missing drivers - takes under a minute2Repair Windows errors before they cause bigger problems3Fix the driver behind crashes, sound loss and screen glitchesChoose a power supply that meets the recommendation for your exact RX 9070 XT card and has the right power connectors for that card. Official partner specifications reviewed here range from 750 W to 850 W, with XFX specifying 800 W for its Mercury model. The right choice depends on the board model and the rest of your system—not on the GPU name alone.
Start with your exact RX 9070 XT model
Board partners set recommendations for individual cards, and they do not all specify the same wattage or connector arrangement. Check the full model name and current product page, including the exact SKU or regional version, before choosing a PSU.
As an Amazon Associate I earn from qualifying purchases.
| RX 9070 XT card | Manufacturer PSU recommendation | GPU power connection |
|---|---|---|
| ASUS Prime OC | 750 W (ASUS product specification, accessed 2026) | Three 8-pin connectors |
| ASUS TUF Gaming OC | 850 W (ASUS product specification, accessed 2026) | Three 8-pin connectors |
| ASRock Taichi OC | 850 W (ASRock product specification, accessed 2026) | 12V-2×6; an included cable connects it to three 8-pin plugs |
| XFX Mercury Gaming Edition | 800 W (XFX product specification, accessed 2026) | Two PCIe 8-pin connections |
| SAPPHIRE PURE OC | 750 W minimum; 317 W typical board power (SAPPHIRE product specification, accessed 2026) | Two 8-pin connectors |
| SAPPHIRE NITRO+ OC PhantomLink | 850 W minimum; 330 W typical board power (SAPPHIRE product specification, accessed 2026) | 12V-2×6; SAPPHIRE lists a three-8-pin adapter option |
These are manufacturer-published specifications, not results from a controlled independent comparison. ASUS says its card-page wattage recommendation assumes a fully overclocked GPU and CPU configuration. See the ASUS Prime specifications, ASUS TUF specifications, ASUS recommended PSU table, ASRock Taichi specifications, XFX Mercury specifications, SAPPHIRE PURE specifications and SAPPHIRE NITRO+ PhantomLink specifications. SAPPHIRE PURE’s figures are from its official page’s search-result extract.
Account for the rest of your system
A card-specific recommendation is a starting point, not a calculation that certifies every combination of components. ASUS’s recommended PSU table lists the RX 9070 XT at 750 W for systems with Intel i5 or AMD Ryzen 5 CPUs, and for Intel Core Ultra 5/i7 or AMD Ryzen 7. It lists 850 W for Intel Core Ultra 7/i9 or AMD Ryzen 9, and for Core Ultra 9, HEDT or AMD Threadripper systems. Use ASUS’s categories as that manufacturer’s guidance, not as a universal rule for every partner card.
#1 Best Overall
- Fully Modular: Reliable and efficient low-noise power supply with fully modular cabling, so you only have to connect the cables your system needs.
- Cybenetics Gold-Certified: Rated for up to 91% efficiency, resulting in lower power consumption, less noise, and cooler temperatures.
- ATX 3.1 Compliant: Compliant with the ATX 3.1 power standard from Intel, supporting PCIe 5.1 and resisting transient power spikes.
- Native 12V-2x6 Connector: Ensures compatibility with the latest graphics cards with a direct GPU to PSU connection – no adapter necessary.
- Embossed Cables with Low-Profile Combs: Sleek, ultra-flexible embossed cables look great and make installing and connecting the RMx a breeze.
Compare the exact card recommendation with your CPU class and the rest of your build. The published figures do not assess every PSU model, its age or condition, or every complete system configuration, so wattage alone cannot certify an older or unknown unit for reuse.
Check the connectors before buying or reusing a PSU
Count the sockets on your particular card, then confirm that the PSU has suitable leads or that the card maker documents an adapter path for that model. The cards above use either two or three 8-pin connections, or a 12V-2×6 connection. The ASRock Taichi includes a 16-pin-to-three-8-pin cable; SAPPHIRE says its NITRO+ PhantomLink includes a three-8-pin adapter for PSUs without 12V-2×6.
Rank #2
- Intel ATX 3.0 & 3.1 Ready: Fully compatible with the latest Intel ATX 3.0 and 3.1 specifications for modern PC builds
- Full Modular 80 PLUS Gold Certified: Achieves 80 PLUS Gold efficiency certification with fully modular cable management for clean builds
- PCIe 5.1 / Gen 5 12+4 Pin 12V-2x6 Cable: Equipped with the latest PCIe 5.1 connector supporting next-generation graphics cards
- High Power Excursion Support: Handles up to 235% power excursion and 300% GPU power excursion for demanding system loads
- Optimized Thermal Control: Steel shell with large vents and 120mm FDB fan enhance cooling performance for reliable operation
- Use only leads supplied with, or explicitly confirmed compatible with, your exact PSU. Modular PSU cables are not interchangeable across models just because their plugs fit.
- If using an adapter, follow the graphics-card and PSU manuals. An adapter is a documented way to connect power; it does not reduce the card’s PSU wattage recommendation.
- Check the PSU’s own specifications and the rest of the computer’s requirements before reusing it.
A practical selection checklist
- Find the complete GPU model name and exact SKU; open that card maker’s current specifications.
- Note the stated PSU capacity and count the card’s power sockets.
- Check your CPU category and other system requirements. ASUS’s table, for example, ranges from 750 W to 850 W by CPU group for the RX 9070 XT.
- Verify the candidate PSU’s capacity and that it has compatible native leads or a manufacturer-documented adapter option.
- For an existing PSU, verify its exact model and condition rather than relying on its wattage label alone.
The figures here do not compare PSU dimensions, noise, efficiency, transient response, prices or model-level test results. Check those separately if they matter to your build.
Quick Recap
Best Value
- Fully Modular PSU: Reliable and efficient, low-noise power supply with fully modular cabling, so you only have to connect the cables your system build needs.
- Intel ATX 3.1 Certified: Compliant with the ATX 3.1 power standard, supporting PCIe 5.1 platform withstands 2x transient power excursions from the GPU.
- Keeps Quiet: A 120mm rifle bearing fan with a specially calculated fan curve keeps fan noise down, even when operating at full load.
- 105°C-Rated Capacitors: Delivers steady, reliable power and dependable electrical performance.
- Modern Standby Compatible: Extremely fast wake-from-sleep times and better low-load efficiency.
Rank #4
- 80 PLUS GOLD CERTIFIED: Delivering gold-level performance with 92% efficiency, ensuring effective power transmission to your components.
- Fully Modular Design: Unique dragon-pattern fully modular cables cut redundant wiring to tidy your chassis, improve airflow and optimize system heat dissipation. With dimensions of 150×150×86mm (5.91×5.91×3.39in), the PSU fits most mainstream ATX cases.
- Support ATX 3.1 & PCIe 5.1: Compliant with the ATX 3.1 standard to fuel high-performance PC components with stability, efficiency, and power spike resistance. Meanwhile, supporting PCIe 5.1 platform withstands 2x transient power excursions from the GPU.
- Dual-Colour 16-Pin Cable: The Dual-color dragon-pattern 12V-2x6 PCI-E 5.1 cable for modern high-end graphics cards. With yellow connector can easily show you whether the cable has been plugged in properly.
- RGB Silent Fan & RGB Lighting Model: This 140mm low-noise fan comes with a silent mode, it outperforms standard 120mm fans in terms of quietness, heat dissipation capability and durability. What's more, the psu features ARGB lighting model, allowing you to adjust the lights style according to your needs.
Rank #3
- 80 PLUS GOLD CERTIFIED Very high operating efficiency Pure Power 13 M 1000W is certified 80 PLUS Gold with an outstanding efficiency rating of up to 94.4%. The most compelling benefit: lower power consumption, consequently lower costs, and above all a cooler as well as quieter operation. Pure Power 13 M 1000W is always the correct choice for quiet systems and gaming PCs!
- FUTURE-PROOF YOUR SYSTEM Fulfills all ATX 3.1 specifications Pure Power 13 M 1000W is an ATX 3.1 PSU and comes with both native integration of the 12V-2x6 connector for next-generation PCIe 5.1 graphics cards, and 4 PCIe 6+2-pin connectors for support of current-gen GPUs. This makes the PSU extremely versatile and the perfect choice for powerful systems of today and the ones to come
- THE NEW STANDARD OF POWER For massive transient loads Pure Power 13 M offers 1000W of continuous power with one massive 12V rail. Even if the graphics card demands excessive power for a short time: Pure Power 13 M 1000W handles power excursions up to double its rated power with ease. This ensures reliable operation with the next generation of processors and graphics cards
- SEMI-PASSIVE ZERO-RPM COOLING Enjoy the silence While under low load, the fan turns off completely until its services are needed again for more demanding operations. This feature, combined with the reliable be quiet! fan and its airflow-optimized fan blades, make Pure Power 13 M 1000W exceptionally silent in all load scenarios
- HIGH-CLASS TECHNOLOGIES Rock-solid stability With its LLC topology Pure Power 13 M 1000W provides best-in-class voltage regulation and efficiency. That makes it perfect for building very quiet systems or upgrading gaming and media creation PCs
Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon at the time of purchase will apply.
