Yes, changing a router’s LAN IP can disconnect you from its settings page immediately. It does not necessarily mean every device has lost internet access: if the router moved to a different subnet, devices still using the old address settings may need to obtain new ones. First try the router’s new address, then check the affected device’s IP address, subnet, gateway, and DHCP settings.
First, distinguish a lost settings page from a lost connection
When the router applies a new LAN IP, its management page is now at that address. NETGEAR says the browser connection ends when its documented Nighthawk setting change takes effect; reopen the browser and connect using the new LAN IP. The exact menus and behavior depend on the router model. NETGEAR’s Nighthawk instructions describe that model-specific process.
As an Amazon Associate I earn from qualifying purchases.
If the new address does not load, that alone does not establish that all devices have lost network service. Test whether the problem is only access to the router’s management page or whether the device also cannot reach other devices or the internet.
Check whether the router moved to a different subnet
The router’s LAN IP and subnet mask define the local subnet. If the new LAN settings put the router on a different subnet, a client that still has an address, subnet mask, or default gateway from the old one may no longer be able to communicate correctly with it. TP-Link explains this relationship in its Archer AX10/AX1500 network settings guide; the menus and behavior should not be assumed to match every router.
#1 Best Overall
- DUAL-BAND WIFI 6 ROUTER: Wi-Fi 6(802.11ax) technology achieves faster speeds, greater capacity and reduced network congestion compared to the previous gen. All WiFi routers require a separate modem. Dual-Band WiFi routers do not support the 6 GHz band.
- AX1800: Enjoy smoother and more stable streaming, gaming, downloading with 1.8 Gbps total bandwidth (up to 1200 Mbps on 5 GHz and up to 574 Mbps on 2.4 GHz). Performance varies by conditions, distance to devices, and obstacles such as walls.
- CONNECT MORE DEVICES: Wi-Fi 6 technology communicates more data to more devices simultaneously using revolutionary OFDMA technology
- EXTENSIVE COVERAGE: Achieve the strong, reliable WiFi coverage with Archer AX1800 as it focuses signal strength to your devices far away using Beamforming technology, 4 high-gain antennas and an advanced front-end module (FEM) chipset
- OUR CYBERSECURITY COMMITMENT: TP-Link is a signatory of the U.S. Cybersecurity and Infrastructure Security Agency’s (CISA) Secure-by-Design pledge. This device is designed, built, and maintained, with advanced security as a core requirement.
- Look up the device’s current IP address and subnet mask in its network settings.
- Compare them with the router’s new LAN address and subnet mask. The client needs settings that place it on the router’s new LAN.
- Check the default gateway as well. It should point to the router’s address on that LAN.
Check the DHCP pool and the client’s address method
DHCP is the service that assigns network addresses to clients. If it is enabled, its address pool needs to fit the router’s new LAN range. NETGEAR documents that changing the LAN IP settings changes the default DHCP server’s address range on its BR500 router. Linksys likewise instructs users to set the DHCP start address in the same range as the router’s new address. These are model-specific instructions, not a universal description of every router’s interface.
Check whether the affected device gets its address automatically or has a manually configured static address:
Rank #2
- Dual-band Wi-Fi with 5 GHz speeds up to 867 Mbps and 2.4 GHz speeds up to 300 Mbps, delivering 1200 Mbps of total bandwidth¹. Dual-band routers do not support 6 GHz. Performance varies by conditions, distance to devices, and obstacles such as walls.
- Covers up to 1,000 sq. ft. with four external antennas for stable wireless connections and optimal coverage.
- Supports IGMP Proxy/Snooping, Bridge and Tag VLAN to optimize IPTV streaming
- Access Point Mode - Supports AP Mode to transform your wired connection into wireless network, an ideal wireless router for home
- Advanced Security with WPA3 - The latest Wi-Fi security protocol, WPA3, brings new capabilities to improve cybersecurity in personal networks
- DHCP client: Give it a chance to obtain current settings. If it remains offline, reconnect it to the network or use the operating system’s network controls to renew its address; the exact controls vary by device.
- Static-address client: Update its IP address, subnet mask, and gateway to fit the new LAN. A computer with a static address outside the new subnet may not be able to reach the router’s new management address.
Linksys describes DHCP’s role in assigning client addresses in its Connectivity Tool overview, and its router IP-change instructions show how its interface handles the DHCP range.
If you still cannot open the router settings
- Confirm the new LAN IP you applied, then enter that address directly in a newly opened browser window.
- Check that the computer or phone is connected to the router’s network and has an address in the new subnet.
- If the computer uses a static address, temporarily configure an address in the router’s new LAN subnet, with the matching subnet mask. D-Link’s DSR-1000AC manual says a management host must either receive an address from the new pool or use a static address in the new LAN subnet to reach the changed router address.
- If DHCP is enabled, reconnect the client or renew its address through its operating system’s network controls, then try the new router address again.
For a different router model, consult its own manual for the management address and DHCP controls. D-Link’s DSR-1000AC manual gives the static-host check; it should not be treated as a menu guide for other products.
Rank #3
- NIGHTHAWK WIFI 6 ROUTER FOR YOUR WHOLE HOME: Delivers fast, reliable WiFi across every room of your apartment or small home for streaming, gaming, video calls, and smart home devices, all running at the same time without slowing each other down.
- WORKS WITH YOUR EXISTING INTERNET SERVICE: Pairs with your existing modem or gateway via ethernet. Compatible with most cable, fiber, DSL, and satellite providers. Some gateways and modem router combos may require bridge mode. No coax needed.
- SET UP AND MANAGE YOUR NETWORK WITH THE NIGHTHAWK APP: Download the free Nighthawk app on iOS or Android for guided setup. Manage WiFi, run speed tests, pause devices, and set up guest networks from anywhere. Active internet required.
- READY FOR THE DEVICES YOU ALREADY OWN: Your phones, laptops, and TVs work right out of the box. WiFi 6 delivers speeds up to 1.8 Gbps across 2.4 GHz and 5 GHz bands. Backward compatible with WiFi 5 and earlier.
- COVERAGE IN EVERY ROOM: Covers up to 1,500 sq. ft. for up to 20 connected devices. Walls, floors, and interference can reduce range. Larger or multi-story homes may benefit from a NETGEAR Orbi mesh WiFi system.
When a reboot may be relevant
Do not assume every LAN IP change requires restarting the router or every connected device. TP-Link notes a reboot for its ISP-customized modem-router guidance, which may not apply to other models. Follow the instructions for the specific router if they call for one. TP-Link’s ISP-customized modem-router guidance is limited to that product context.
Changing a LAN IP can be useful when addressing conflicts, but it is not a routine fix every home network needs. D-Link gives an address conflict as one reason to change a router IP and identifies that address as the one used to access its web management interface. D-Link’s router IP guidance is specific to its documented product family.
Quick Recap
Best Value
- Dual band router upgrades to 1200 Mbps high speed internet (300mbps for 2.4GHz plus 900Mbps for 5GHz), reducing buffering and ideal for 4K stream
- Full Gigabit Ports - Gigabit Router with 4 Gigabit LAN ports, ideal for any internet plan and allow you to directly connect your wired devices
- Boosted Coverage - Four external antennas equipped with Beamforming technology extend and concentrate the Wi-Fi signals
- MU-MIMO technology - (5GHz band) allows high speeds for multiple devices simultaneously
- Access Point Mode - Supports AP Mode to transform your wired connection into wireless network, an ideal wireless router for home
Rank #4
- 𝐅𝐮𝐭𝐮𝐫𝐞-𝐏𝐫𝐨𝐨𝐟 𝐘𝐨𝐮𝐫 𝐇𝐨𝐦𝐞 𝐖𝐢𝐭𝐡 𝐖𝐢-𝐅𝐢 𝟕: Powered by Wi-Fi 7 technology, enjoy faster speeds with Multi-Link Operation, increased reliability with Multi-RUs, and more data capacity with 4K-QAM, delivering enhanced performance for all your devices.
- 𝐁𝐄𝟑𝟔𝟎𝟎 𝐃𝐮𝐚𝐥-𝐁𝐚𝐧𝐝 𝐖𝐢-𝐅𝐢 𝟕 𝐑𝐨𝐮𝐭𝐞𝐫: Delivers up to 2882 Mbps (5 GHz), and 688 Mbps (2.4 GHz) speeds for 4K/8K streaming, AR/VR gaming & more. Dual-band routers do not support 6 GHz. Performance varies by conditions, distance, and obstacles like walls.
- 𝐔𝐧𝐥𝐞𝐚𝐬𝐡 𝐌𝐮𝐥𝐭𝐢-𝐆𝐢𝐠 𝐒𝐩𝐞𝐞𝐝𝐬 𝐰𝐢𝐭𝐡 𝐃𝐮𝐚𝐥 𝟐.𝟓 𝐆𝐛𝐩𝐬 𝐏𝐨𝐫𝐭𝐬 𝐚𝐧𝐝 𝟑×𝟏𝐆𝐛𝐩𝐬 𝐋𝐀𝐍 𝐏𝐨𝐫𝐭𝐬: Maximize Gigabitplus internet with one 2.5G WAN/LAN port, one 2.5 Gbps LAN port, plus three additional 1 Gbps LAN ports. Break the 1G barrier for seamless, high-speed connectivity from the internet to multiple LAN devices for enhanced performance.
- 𝐍𝐞𝐱𝐭-𝐆𝐞𝐧 𝟐.𝟎 𝐆𝐇𝐳 𝐐𝐮𝐚𝐝-𝐂𝐨𝐫𝐞 𝐏𝐫𝐨𝐜𝐞𝐬𝐬𝐨𝐫: Experience power and precision with a state-of-the-art processor that effortlessly manages high throughput. Eliminate lag and enjoy fast connections with minimal latency, even during heavy data transmissions.
- 𝐂𝐨𝐯𝐞𝐫𝐚𝐠𝐞 𝐟𝐨𝐫 𝐄𝐯𝐞𝐫𝐲 𝐂𝐨𝐫𝐧𝐞𝐫 - Covers up to 2,000 sq. ft. for up to 60 devices at a time. 4 internal antennas and beamforming technology focus Wi-Fi signals toward hard-to-reach areas. Seamlessly connect phones, TVs, and gaming consoles.
Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon at the time of purchase will apply.
