Recommended Free Tools
Tom’s Hardware reported a $37.79 Amazon price for UGREEN’s 10-port Gigabit PoE+ switch on September 30, 2026, calling it a record low against a $49.99 reference price. That offer is not confirmed as live: UGREEN’s US product page showed $59.99 and “Sold out” on October 3, 2026. Check Amazon’s current price and stock before treating it as an active deal.
The switch has eight PoE+ ports for powered devices and two Gigabit uplinks. Its key limit is a shared 60W PoE budget: although an individual port can support up to 30W, the switch cannot supply 30W to all eight ports at once.
As an Amazon Associate I earn from qualifying purchases.
What the reported deal was—and what is known now
Tom’s Hardware reported the switch at $37.79 on Amazon on September 30, 2026, compared with a stated $49.99 reference price and a 24% saving. Those are the publication’s dated deal figures, not a guaranteed current price. The later UGREEN US listing displayed $59.99 and “Sold out” on October 3, 2026. No live Amazon listing was checked for this article, so availability and current pricing remain unconfirmed.
Do these 3 things before closing this tab:
1Repair Windows errors before they cause bigger problems2Scan for outdated or missing drivers - takes under a minute3Clear out junk files and repair common Windows errorsThe product is UGREEN SKU 35372US. Its official US listing describes a 10-port Ethernet switch with eight PoE+ Gigabit ports and two Gigabit uplinks.
#1 Best Overall
- More Ports, PoE Ready: UGREEN ethernet switch offers 8 PoE+ (802.3at/af) Gigabit ports (up to 30W each) and 2 Gigabit uplink ports, with a total power budget of 60W. Ideal for efficient power delivery and seamless network connectivity
- Intelligent Power Management: If power exceeds 60W, it cuts ports in priority order (8–1) to prevent overload. It auto-detects PoE devices, supplies power to them, and transmits data only to non-PoE devices. Short-circuited ports shut off independently
- PoE Auto Recovery: In Extend Mode, ports 1–6 automatically detect and restart powered devices (such as cameras or access points) when they go offline or freeze, ensuring stable PoE operation without manual monitoring or restart
- One Touch, Three Modes: The unmanaged ethernet switch can easily switch between Standard, Port Isolation (VLAN), and Extend with one button. Port Isolation separates ports 1–8 to prevent network storms. Extend mode supports PoE up to 820 ft, ideal for security systems and long-distance deployment
- High-Speed, Low Latency: The ethernet splitter offers 1000Mbps connectivity for real-time, lag-free monitoring with security cameras, efficient IP phone connections for work, and enhanced performance for wireless access points across your network
How the 60W PoE budget works
UGREEN specifies up to 30W for an individual PoE port and a 60W total budget shared across the switch. That distinction matters: eight ports do not each get a simultaneous 30W allocation. The connected devices’ combined power demand must fit within 60W. UGREEN says that if demand exceeds the total budget, ports are cut in priority order from port 8 down to port 1.
The powered ports support PoE+ (802.3at/af), according to UGREEN. Before buying, check each endpoint’s PoE standard and expected power draw, then make sure their combined demand fits the switch’s budget. A device with an Ethernet port is not necessarily PoE-powered; it may need its own power supply.
Rank #2
- More Ports, PoE Ready: UGREEN PoE Switch offers 4 PoE+ (802.3at/af) Gigabit ports (up to 30W each) and 2 Gigabit uplink ports, with a total power budget of 60W. Ideal for efficient power delivery and seamless network connectivity
- Intelligent Power Management: If power exceeds 60W, it cuts ports in priority order (4–1) to prevent overload. It auto-detects PoE devices, supplies power to them, and transmits data only to non-PoE devices. Short-circuited ports shut off independently
- One Touch, Three Modes: The unmanaged ethernet switch can easily switch between Standard, Port Isolation (VLAN), and Extend with one button. Port Isolation separates ports 1–4 to prevent network storms. Extend mode supports PoE up to 820 ft, ideal for security systems and long-distance deployment
- High-Speed, Low Latency: The ethernet hub offers 1000Mbps connectivity for real-time, lag-free monitoring with security cameras, efficient IP phone connections for work, and enhanced performance for wireless access points across your network
- Plug and Play, Easy Setup: This plug-and-play ethernet splitter supports full-duplex and half-duplex modes. Indicator lights show the status. And the PoE ports automatically detect whether a connected device supports PoE and supply power accordingly
Port layout and intended devices
The eight PoE+ ports can supply data and power to compatible endpoints over Ethernet. The two separate Gigabit uplinks connect the switch to the existing network, leaving the eight PoE+ ports available for endpoints. All ports are specified for 1000Mbps Gigabit connectivity.
- PoE-powered devices: UGREEN names security cameras, IP phones and wireless access points. These are sensible use cases when their power requirements fit the shared budget.
- Ordinary Ethernet devices: Computers, laptops and routers appear among UGREEN’s compatible-device examples. Tom’s Hardware also mentions NAS drives, printers, TVs and game consoles as devices that can use the switch for network connectivity without drawing PoE.
Modes, setup and physical features
UGREEN lists Standard, VLAN and Extend modes. In the manufacturer’s description, VLAN mode isolates ports 1–8, while Extend mode supports PoE connections up to 820 feet. These are vendor specifications, not independently tested range or performance results. Check whether the mode and distance suit your network layout before relying on them.
Rank #3
- [Flexible Full Gigabit 5-Port PoE Configuration] 4x PoE+ (802.3at/af) 10/100/1000 Mbps RJ45 ports providing up to 30W per port and total PoE power budget of 65W, together w/ 1x Gigabit Non-PoE Port for high-speed connections.
- [Plug and Play] Easy setup with no software installation or configuration needed.
- [Advanced Software Features] Prioritize your traffic and guarantee high quality of video or voice data transmission with Port-based 802.1p/DSCP QoS and IGMP Snooping.
- [Sturdy Metal Case] Durable metal casing and desktop/wall-mounting design are well-suited for different environments.
- [Reliable and Quiet] IEEE 802.3X flow control provides reliable data transfer and Fanless design ensures quiet operation.
UGREEN describes the switch as plug-and-play, with automatic detection of PoE devices. Tom’s Hardware calls it unmanaged, so buyers looking for broad configuration and monitoring controls should not assume this model provides them. The product page also lists a metal housing, desktop or wall mounting and 6KV lightning protection. No hands-on testing or benchmark is available here.
Independent reader supportYour contribution helps us test, update, and keep practical guides available for everyone.Who should consider it
This switch is a straightforward fit to investigate if you need several wired PoE+ connections—such as for cameras or access points—and a Gigabit uplink to your existing network. It may be less suitable if your endpoints together need more than 60W, require a different PoE standard, or if you need managed-switch configuration beyond the listed modes. Compare those requirements, the number of powered ports and uplinks, and whether Gigabit is sufficient before choosing a switch.
Rank #4
- POE+ POWER FOR 4 DEVICES: All 4 PoE+ ports support IEEE 802.3at, delivering up to 30W per port within a 60W total shared budget to run IP cameras, wireless APs, and VoIP phones
- GIGABIT PERFORMANCE ON ALL 5 PORTS: Every port runs at 1000 Mbps with a 10 Gbps switching capacity and up to 2,000 Mbps of dedicated bandwidth per port for fast, reliable throughput
- PLUG-AND-PLAY SETUP: No software, no configuration needed. Connect your devices and the switch works immediately with auto-MDI/MDIX on all ports and automatic PoE device detection
- REAL-TIME POE BUDGET MONITORING: The PoE MAX LED indicator turns orange when total PoE draw reaches 50W, giving you a clear visual warning before the 60W budget limit is reached
- FANLESS SILENT OPERATION WITH ENERGY SAVING: Completely fanless design with IEEE 802.3az Energy Efficient Ethernet reduces power draw automatically during low-traffic periods for quiet use
For a deal decision, use the $37.79 figure only as the offer Tom’s Hardware reported on September 30, 2026. Confirm price and stock on the live merchant listing; the official UGREEN page’s October 3 display was a different price and showed the product as sold out.
Quick Recap
Best Value
- 𝗙𝘂𝗹𝗹 𝗚𝗶𝗴𝗮𝗯𝗶𝘁 𝟴-𝗣𝗼𝗿𝘁 𝗣𝗼𝗘 𝗖𝗼𝗻𝗳𝗶𝗴𝘂𝗿𝗮𝘁𝗶𝗼𝗻 - 8 PoEplus (802.3at/af) Gigabit RJ45 providing up to 30W per port and total PoE power budget of 65W. Up to 16 Gbps switching capacity.
- 𝗘𝘅𝘁𝗲𝗻𝗱𝗲𝗱 𝗣𝗼𝗘 𝗧𝗿𝗮𝗻𝘀𝗺𝗶𝘀𝘀𝗶𝗼𝗻 - Up to 820 ft PoE transmission distance with Extend Mode button on, perfect for surveillance camera deployment in large areas.
- 𝗣𝗼𝗘 𝗔𝘂𝘁𝗼 𝗥𝗲𝗰𝗼𝘃𝗲𝗿𝘆 - Automatically reboots your dropped or unresponsive PoE-powered devices with PoE Auto Recovery Mode on.
- 𝗣𝗹𝘂𝗴 𝗮𝗻𝗱 𝗣𝗹𝗮𝘆 - Simply plug and play for instant connectivity with no configuration required.
- 𝗦𝗶𝗹𝗲𝗻𝘁 𝗢𝗽𝗲𝗿𝗮𝘁𝗶𝗼𝗻 - Fanless design reduces power consumption and ensures silent operation, ideal for noise-sensitive homes or businesses.
Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon at the time of purchase will apply.
