Do these 3 things before closing this tab:
1Scan for outdated or missing drivers - takes under a minute2Repair Windows errors before they cause bigger problems3Fix the driver behind crashes, sound loss and screen glitchesVIEWE’s PLCM-UES31S043H800V480C-U is a 4.3-inch touchscreen development board built around Espressif’s preview ESP32-S31. CNX Software reported a direct-store price of $38.99 on October 14, 2026. Its combination of 2.4 GHz Wi-Fi 6, Bluetooth 5.4, IEEE 802.15.4, industrial wired interfaces and a ready-made display makes it unusually capable for a small HMI prototype—but the preview-only software status matters if you need a production-ready platform.
What the VIEWE ESP32-S31 board includes
The board combines a display, wireless radios, expansion connectors and audio hardware on a 105 × 67 mm PCB. The front panel is a 4.3-inch IPS TFT with 800 × 480 resolution, 400 cd/m² brightness and capacitive touch handled by a GT911 controller.
As an Amazon Associate I earn from qualifying purchases.
| Area | Published specification |
|---|---|
| Processor | ESP32-S31-WROOM-3 with a 320 MHz high-performance RISC-V core and a low-power core |
| Memory | 512 KB SRAM, 32 KB low-power SRAM, 16 MB PSRAM and 16 MB flash |
| Wireless | 2.4 GHz Wi-Fi 6; Bluetooth 5.4 LE and Classic; IEEE 802.15.4 for Zigbee, Thread and Matter |
| Display and touch | 4.3-inch IPS TFT, 800 × 480, 400 cd/m², GT911 capacitive-touch controller |
| Wired expansion | USB-C for 5 V power, programming and serial debugging; USB 2.0 Type-A OTG; microSD; RS485 and CAN terminal block; 20-pin GPIO header with UART and I2C |
| Audio and controls | ES8389 stereo codec, two NS4150B Class-D amplifiers, two microphones, left/right speaker connectors, four ADC buttons, BOOT and RESET buttons, WS2812B RGB LED and a 3 kHz buzzer |
| Power and environment | 5 V input; typically 320 mA and up to 500 mA with the backlight on; operating range −20 °C to +70 °C |
The $38.99 figure is the VIEWE-store price reported by CNX Software in 2026, not a guaranteed future price, shipping quote or availability promise.
Why Wi-Fi 6, Zigbee and Thread in one board matters
The radio mix covers more than ordinary Wi-Fi dashboards. Wi-Fi 6 provides the network connection for cloud services or local IP devices, Bluetooth 5.4 supports nearby peripherals, and the IEEE 802.15.4 radio is the low-power link used by Zigbee and Thread. Matter can run over Thread or Wi-Fi, so the hardware combination is suitable for experimenting with a multi-ecosystem smart-home controller. The published specifications establish radio capability; they do not establish certification, interoperability testing or a finished Matter product.
#1 Best Overall
- 【Powerful ESP32-S3 Core】 Equipped with an Xtensa LX7 dual-core processor (up to 240MHz), featuring 16MB Flash and built-in Wi-Fi & Bluetooth for reliable wireless communication.
- 【2.8-Inch IPS Touchscreen Display】 Features a 240x320 resolution full color screen, supports up to 262K colors (RGB666) for rich color display and wide viewing angles. Capacitive touch screen for a smooth interactive experience.
- 【Rich Audio & Interface Support】 Includes a built-in microphone and external speaker support, with multiple I/O options like I2C, UART, and SPI for expanded functionality.
- 【Battery & Storage Friendly Design】 Supports external lithium battery, micro TF card slot for storage, and an integrated battery management circuit for safe charging and discharging.
- 【Easy Development & AI Voice Chat】 Comes with a USB Type-C port for programming, and supports AI voice chat for smart applications. Provides abundant sample programs for easy learning.
Because the board also exposes RS485 and CAN, it can serve as the interface for equipment that does not use wireless protocols. That makes it a plausible prototype platform for a building-control panel, greenhouse monitor, machine HMI or gateway interface. These are capability-based applications inferred from the listed interfaces and protocols, not independent performance tests.
What you can build
Smart-home wall panel
Use the 800 × 480 touch display for scenes, sensor status and climate controls while Wi-Fi, Thread or Zigbee connects to devices in different ecosystems. The microphones, codec, amplifiers and speaker connectors leave room for voice prompts or two-way audio experiments.
Rank #2
- ESP32 Development Board WT32-SC01 Plus with 3.5in Multi-Touch IPS Screen with GUI Firmware 8MB PSRAM, WiFi, BT, BLE MCU Module
- WT32-SC01 is an ESP32 Development board with a 3.5-inch color touch screen. The touch screen enables a new way of interacting with the ESP32. The board is equipped with a graphical user interface (GUI) firmware, which supports graphical drag-and-drop programming and helps users develop a customized control platform
- WT32-SC01 development board adopts the ESP32-WROVER-B module, which is a general-purpose MCU module with Wi-Fi, Bluetooth, 4MB SPI Flash and 8MB PSRAM.
- CPU: Dual-core Xtensa 32-bit LX6 MCU; 2-point touch, Capacitive touch screen; Size3.5 inches; resolution-320*480; power supply:DC 5V /2A; operating temperature:–20 ~ 85 °C
- Application: home automation, smart home control panel, 86 box, wearable electronics, gateway with screen
Industrial or building HMI
RS485 and CAN provide direct links to controllers, meters and drives. The microSD slot can hold logs or configuration files, while the GPIO header exposes UART and I2C for additional sensors and modules.
What’s actually slowing this PC down?
Pick the symptom - the matching free tool is one click away.
Standalone multimedia controller
The ES8389 codec, dual Class-D amplifiers, microphones and buttons support an audio interface prototype rather than a display-only dashboard. USB OTG adds another route for attaching compatible peripherals.
Rank #3
- ESP32-S3R8 Processor--- Equipped with ESP32-S3R8 Xtensa 32-bit LX7 dual-core processor, up to 240MHz main frequency. Supports 2.4GHz W-i-F-i (802.11 b/g/n) and Blue--tooth 5 (LE), with onboard antenna. Built in 512KB of SRAM and 384KB ROM, with onboard 8MB PSRAM and an external 16MB Flash memory.
- AMOLED Touch Screen--- Onboard 1.8inch AMOLED display for clear color picture display, 368 x 448 resolution, 16.7M color, 178° wide viewing angle. Compared to those traditional LCD displays, the AMOLED screen features precise light-control capability, representing more delicate colors, more picture details, and more vivid video image.
- Onboard Audio Codec---Supports high-quality audio processing, providing clear and high-quality audio input and output. Supports Offline Speech recognition and AI Speech Interaction---Allows access to online large model platforms to support more AI application scenarios.
- For Various Smart Devices---Suitable For Various Smart Devices Development, Can Realize Human-Computer Interaction Function. Supports installing ba|tte|ry inside the case for independent operation. （Note: this version doesn't include ba|tte|ry ） Dedicated Black Case---with removable back cover for easy embedded into the projects and DIY design.
- Sensor and Chip---Onboard QMI8658 6-axis IMU (3-axis accelerometer and 3-axis gyroscope) for detecting motion gesture, counting steps, etc. Built-in SH8601 display driver and FT3168 capacitive touch chip, using QSPI and I2C communication respectively, effectively saving the IO resources.
Software status: powerful hardware, preview-stage workflow
ESP32-S31 is described as a preview device. CNX Software reports that it can currently be programmed only with Espressif’s ESP-IDF framework, using the ESP-IDF master branch with the --preview flag. The cited material does not claim Arduino support for this board.
VIEWE supplies examples covering LCD output, touch input, ES8389 audio playback, SD-card access, RS485, CAN and a complete LVGL factory UI. Those examples can shorten the path to a demonstrator, but they do not turn preview silicon into a stable production SDK. Expect API, toolchain or documentation changes as ESP-IDF support matures, and plan time to maintain your own fork or adapt application code.
Rank #4
- The display screen is controllable and can be used for APP remote control, remote environmental data collection and remote. Data , remote parameter setting and other batch development applications.
- ESP32-2432S028 development board is based on the ESP32-DOWDQ6 controller, low-power, dual-core CPU, clock frequency up to 240MHZ, integrates a wealth of resource peripherals, high-speed SDIO,SPI, UART and other functions
- Application: Home smart device image transmission, Wireless monitoring, Smart agriculture QR wireless recognition, Wireless positioning system signal, And other IoT applications
- ESP32 WIFI&Bluetooth Development Board 2.8 " 240*320 Smart Display Screen 2.8inch LCD TFT Module With Touch WROOM; Support: 1: UART/SPI/I2C/PWM/ADC/DAC and other interfaces 2:OV2640 and OV7670 cameras, built-in flash 3:picture WiFI upload 4:TF card 5:multiple sleep modes 6:Embedded Lwip and FreeRTOS 7:STA/AP/STA+AP working mode 8:Smart Config 9:AirKiss one-click network configuration 10:secondary development
- The ESP32-24325028 development board is based on the company's ESP32-D0WDQ6 controller, with dual core CPU and clock frequency up to 240MHz. It integrates peripherals, high-speed SDO, SP, UART and other functions, and supports automatic download.
Power, wiring and setup considerations
- Provide a regulated 5 V supply through USB-C. The published draw is typically 320 mA and can reach 500 mA with the backlight on, so a marginal USB port or cable can cause resets.
- Use the BOOT and RESET controls and the USB-C serial-debug connection during firmware development.
- Budget for a microSD card and suitable speakers if your project uses storage or the onboard audio path; neither accessory is included in the published board specification.
- For RS485 and CAN installations, design the required transceiver wiring, termination and protection around the target bus. The presence of a terminal block does not by itself define a complete industrial interface design.
- Keep the stated −20 °C to +70 °C operating range in mind when selecting an enclosure and power supply.
How it compares with other ESP32 display options
The ESP32-C6 and ESP32-C5 families, as well as ESP32-P4 paired with a radio device, can be sensible alternatives, but the right choice depends on the complete board rather than the chip name. Compare these points for the exact candidate:
- Display diagonal, resolution, brightness and touch controller.
- Whether Wi-Fi is 2.4 GHz only or includes another band, and which Bluetooth and 802.15.4 features are implemented.
- Actual Zigbee, Thread and Matter software support, not just a radio listed on a datasheet.
- CPU architecture, clock rate, SRAM, PSRAM and flash.
- RS485, CAN, USB OTG, microSD and GPIO availability.
- Audio codec, microphone, amplifier and speaker connections.
- SDK maturity, examples, documentation and long-term update policy.
- Power draw, physical size, environmental rating and total accessory cost.
This board’s differentiator is the number of these functions delivered on one small PCB. A simpler C6 or C5 touchscreen kit may be easier to support if you do not need wired industrial buses or 802.15.4, while a P4-based design may be preferable when application-level compute is more important than an integrated low-power radio mix. The published material contains no head-to-head benchmark, latency measurement, battery-life result or failure-rate statistic.
Best Value
- The ESP32 display screen is controllable and can be used for APP remote control, remote environmental data collection and remote. Data , remote parameter setting and other batch development applications.
- ESP32-2432S028 development board is based on the ESP32-DOWDQ6 controller, low-power, dual-core CPU, clock frequency up to 240MHZ, integrates a wealth of resource peripherals, high-speed SDIO,SPI, UART and other functions
- Application: Home smart device image transmission, Wireless monitoring, Smart agriculture QR wireless recognition, Wireless positioning system signal, And other IoT applications（(User manual available if do as follow: click "AITRIP"(you can find "Sold by AITRIP" under Buy Now button), in the new page, click "Ask a question".)we will send you the manual asap））
- ESP32 WIFI&Bluetooth Development Board 2.8 " 240*320 Smart Display Screen 2.8inch LCD TFT Module With Touch WROOM; Support: 1: UART/SPI/I2C/PWM/ADC/DAC and other interfaces 2:OV2640 and OV7670 cameras, built-in flash 3:picture WiFI upload 4:TF card 5:multiple sleep modes 6:Embedded Lwip and FreeRTOS 7:STA/AP/STA+AP working mode 8:Smart Config 9:AirKiss one-click network configuration 10:secondary development
- The ESP32-24325028 development board is based on the company's ESP32-D0WDQ6 controller, with dual core CPU and clock frequency up to 240MHz. It integrates peripherals, high-speed SDO, SP, UART and other functions, and supports automatic download.
Is it ready for production?
Not on the evidence currently available. The ESP32-S31 is explicitly a preview device and the board’s documented workflow depends on the ESP-IDF master branch with a preview flag. That is a strong fit for developers evaluating the silicon, building a proof of concept or validating a product architecture. A production design should wait for a stable SDK and silicon status, then repeat compliance, thermal, power, wireless-interoperability and long-duration testing on the final hardware.
For an early prototype at a reported $38.99, however, the board offers a rare combination: a usable 4.3-inch touch UI, substantial memory, Wi-Fi 6, Bluetooth 5.4, 802.15.4, industrial buses and audio on one development platform.
Quick Recap
Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon at the time of purchase will apply.
